The microstructural evolution of C-（A）-S-H gel in Portland cement pastes immersed in pure water and 5.0 wt% Na2SO4 solution for different ages was comparatively investigated, by means of ^（29） Si NMR spectroscopy,...The microstructural evolution of C-（A）-S-H gel in Portland cement pastes immersed in pure water and 5.0 wt% Na2SO4 solution for different ages was comparatively investigated, by means of ^（29） Si NMR spectroscopy, and SEM-EDS analysis. Additionally, molecular dynamics simulation was performed to study the aluminum coordination status and interaction of sulfate ions in C-（A）-S-H gel. The results showed significant changes in the microstructural evolution of C-（A）-S-H gel in Portland cement paste. Sulfate attack has decalcifying and dealuminizing effect on C-（A）-S-H gel which is evident from increase in mean chain length（MCL） and decrease in Ca/Si ＆ Al[4]/Si ratios of C-（A）-S-H gel. Additionally, Molecular dynamics simulation proves that Al[4] substituted in silicate chains of C-（A）-S-H gel is thermodynamically metastable, which may explain its migration from the silicate chains and transformation to Al[6], thus lowering the Al[4]/Si ratio of C-（A）-S-H gel. SO4^（2-）ions can carry the interfacial Ca^（2＋） ions into the pore solution by the diffusion-absorption-desorption process, which unravels the mechanism of sulfate attack on C-（A）-S-H gel.展开更多
Microsilica-gel bonded bauxite based no-cement refractory castables（NCCs）have been produced using two readily available dispersants.These NCCs were compared to NCC with Siox X-Zero,a purposely-developed product for ...Microsilica-gel bonded bauxite based no-cement refractory castables（NCCs）have been produced using two readily available dispersants.These NCCs were compared to NCC with Siox X-Zero,a purposely-developed product for microsilica-gel bonded no-cement castable systems to control flow properties and setting characteristics.Three mixing and curing temperatures were applied：5℃,20℃and 35℃.The results show that setting-behaviour and mechanical properties strongly vary with the type of dispersant and the curing temperature.However,both setting and strength are less temperature dependent in the castables with Siox X-Zero.Furthermore,the drying and firing of microsilica-gel bonded NCCs were investigated.Since microsilica-gel bond system contains only a small amount of bound water,the castables can be fired at very high heating rates,once the free water has been removed.展开更多
基金Funded by National Natural Science Foundation of China(Nos.51778513,51578004,51608004)the Major State Basic Research Development Program of China("973"Program)(No.2015CB655101)
文摘The microstructural evolution of C-（A）-S-H gel in Portland cement pastes immersed in pure water and 5.0 wt% Na2SO4 solution for different ages was comparatively investigated, by means of ^（29） Si NMR spectroscopy, and SEM-EDS analysis. Additionally, molecular dynamics simulation was performed to study the aluminum coordination status and interaction of sulfate ions in C-（A）-S-H gel. The results showed significant changes in the microstructural evolution of C-（A）-S-H gel in Portland cement paste. Sulfate attack has decalcifying and dealuminizing effect on C-（A）-S-H gel which is evident from increase in mean chain length（MCL） and decrease in Ca/Si ＆ Al[4]/Si ratios of C-（A）-S-H gel. Additionally, Molecular dynamics simulation proves that Al[4] substituted in silicate chains of C-（A）-S-H gel is thermodynamically metastable, which may explain its migration from the silicate chains and transformation to Al[6], thus lowering the Al[4]/Si ratio of C-（A）-S-H gel. SO4^（2-）ions can carry the interfacial Ca^（2＋） ions into the pore solution by the diffusion-absorption-desorption process, which unravels the mechanism of sulfate attack on C-（A）-S-H gel.
文摘Microsilica-gel bonded bauxite based no-cement refractory castables（NCCs）have been produced using two readily available dispersants.These NCCs were compared to NCC with Siox X-Zero,a purposely-developed product for microsilica-gel bonded no-cement castable systems to control flow properties and setting characteristics.Three mixing and curing temperatures were applied：5℃,20℃and 35℃.The results show that setting-behaviour and mechanical properties strongly vary with the type of dispersant and the curing temperature.However,both setting and strength are less temperature dependent in the castables with Siox X-Zero.Furthermore,the drying and firing of microsilica-gel bonded NCCs were investigated.Since microsilica-gel bond system contains only a small amount of bound water,the castables can be fired at very high heating rates,once the free water has been removed.
