Analysis of solute redistribution and centerline segregation in continuously cast thin slab

A model has been built to calculate the solute redistribution in continuously cast thin slab and the effect of the fluid flow in mush on the centerline segregation was analyzed. The corresponding simulation program was developed by applying the SIMPLER algorithm. The momentum, energy and species conservation equations were solved simultaneously. The macro-segregation of a 3-D thin slab with 900 mm × 50 mm cross section was simulated. The obtained results show that negative segregation forms near the slab surface and severe centerline segregation forms in the mid-thickness plane. The species concentration in the centerline of the slab increases obviously at the final solidification stage.

Centerline Segregation in Continuous Casting Billets

Centerline segregation is of practical significance since it affects the material properties. Center- line segregation in continuous casting billets was studied by solving the fluid flow, solidification, and solute transport equations from the initially liquid steel to the completely solid state using the finite difference method with the SIMPLER algorithm. The results show that the centerline segregation is induced by both the fluid flow in the mushy zone and the accumulation of solute-rich liquid near the solidification front. The species concentration in the center of the strand rises quickly in the mushy region to a maximum at the end of solidification. The most serious segregation occurs along the billet centerline.

Study Segregation of Alloying Elements in Continuous Casting Slab with Valence Electron Structure

By calculating the electron structures of the phases that phosphor, sulfur and alloying elements dissolving inγ-Fe, the reason why alloying elements can bring centerline segregation in continuous casting slab (CCS) with nA, the number of electrons on the strongest covalent bonds, and the structure formation factor S were investigated, and an electron structural criterion to control and to eliminate the centerline segregation was advanced. Basing on this, the electron structures of a part of rare earth phosphides and sulfides are calculated, the physical mechanism that rare earth elements can control the segregation of phosphor and sulfur is analyzed, and the criterion is well verified.

Influence of band microstructure on carbide precipitation behavior and toughness of 1 GPa-grade ultra-heavy gauge low-alloy steel

This study investigated the influence of band microstructure induced by centerline segregation on carbide precipitation behavior and toughness in an 80 mm-thick 1 GPa low-carbon low-alloy steel plate.The quarter-thickness(1/4t)and half-thickness(1/2t)regions of the plate exhibited similar ductility and toughness after quenching.After tempering,the 1/4t region exhibited~50%and~25%enhancements in both the total elongation and low-temperature toughness at-40°C,respectively,without a decrease in yield strength,whereas the toughness of the 1/2t region decreased by~46%.After quenching,both the 1/4t and 1/2t regions exhibited lower bainite and lath martensite concentrations,but only the 1/2t region exhibited microstructure bands.Moreover,the tempered 1/4t region featured uniformly dispersed short rod-like M_(23)C_(6)carbides,and spherical MC precipitates with diameters of~20–100 nm and<20 nm,respectively.The uniformly dispersed nanosized M_(23)C_(6)carbides and MC precipitates contributed to the balance of high strength and high toughness.The band microstructure of the tempered 1/2t region featured a high density of large needle-like M3C carbides.The length and width of the large M3C carbides were~200–500 nm and~20–50 nm,respectively.Fractography analysis revealed that the high density of large carbides led to delamination cleavage fracture,which significantly deteriorated toughness.