Characterising the nature, evolution and origin of detachment fault in central depression belt, Qiongdongnan Basin of South China Sea: evidence from seismic reflection data

Using regional geological, newly acquired 2D and 3D seismic, drilling and well log data, especially 2D long cable seismic profiles, the structure and stratigraphy in the deep-water area of Qiongdongnan Basin are interpreted. The geometry of No.2 fault system is also re-defined, which is an important fault in the central depression belt of the deep-water area in the Qiongdongnan Basin by employing the quantitative analysis techniques of fault activity and backstripping. Furthermore, the dynamical evolution of the No.2 fault sys-tem and its controls on the central depression belt are analyzed. This study indicates that the Qiongdongnan Basin was strongly influenced by the NW-trending tensile stress field during the Late Eocene. At this time, No.2 fault system initiated and was characterized by several discontinuous fault segments, which controlled a series small NE-trending fault basins. During the Oligocene, the regional extensional stress field changed from NW-SE to SN with the oceanic spreading of South China Sea, the early small faults started to grow along their strikes, eventually connected and merged as the listric shape of the No.2 fault system as ob-served today. No.2 fault detaches along the crustal Moho surface in the deep domain of the seismic profiles as a large-scale detachment fault. A large-scale rollover anticline formed in hanging wall of the detachment fault. There are a series of small fault basins in both limbs of the rollover anticline, showing that the early small basins were involved into fold deformation of the rollover anticline. Structurally, from west to east, the central depression belt is characterized by alternatively arranged graben and half-graben. The central depression belt of the Qiongdongnan Basin lies at the extension zone of the tip of the V-shaped northwest-ern ocean sub-basin of the South China Sea, its activity period is the same as the development period of the northwestern ocean sub-basin, furthermore the emplacement and eruption of magma that originated from the mantle below the Moho surface occurred at the region between Songnan-Baodao and Changchang sags, from east to west with the early-stage spreading of the South China Sea. Therefore, this study not only helps in depicting the structural features and evolution of the deep-water basin in the Qiongdongnan Basin, but also provides the geological and structural evidence for establishing a unified model of continental margin extension and oceanic spreading.

Multistage Deformation in the Northeastern Segment of the Jiangshao Fault (Suture) Belt: Constraints for the Relationship between the Yangtze Plate and the Cathaysia Old Land

Multistage deformation events have occurred in the northeastern Jiangshao Fault （Suture） Belt. The earliest two are ductile deformation events. The first is the ca. 820 Ma top-to-the-northwest ductile thrusting, which directly resulted from the collision between the Cathaysia Old Land and the Chencai Arc （？） during the Late Neoproterozoic, and the Jiangnan Orogenic Belt that formed as the ocean closed between the Yangtze Plate and the jointed Cathaysia Old Land and the Chencai Arc due to continuous compression. The second is the ductile left-lateral strike-slipping that occurred in the latest Early Paleozoic. Since the Jinning period, all deformation events represent the reactivation or inversion of intraplate structures due to the collisions between the North China and Yangtze plates during the Triassic and between the Philippine Sea and Eurasian plates during the Cenozoic. In the Triassic, brittle right-lateral strike-slipping and subsequent top-to-the south thrusting occurred along the whole northeastern Jiangshao Fault Zone because of the collision between the North China and Yangtze plates. In the Late Mesozoic, regional extension took place across southeastern China. In the Cenozoic, the collision between the Philippine Sea and Eurasian plates resulted in brittle thrusts along the whole Jiangnan Old land in the Miocene. The Jiangshao Fault Belt is a weak zone in the crust with long history, and its reactivation is one of important characteristics of the deformation in South China; however, late-stage deformation events did not occur beyond the Jiangnan Old Land and most of them are parallel to the strike of the Old Land, which is similar to the Cenozoic deformation in Central Asia. In addition, the Jiangnan old Land is not a collisional boundary between the Yangtze Plate and Cathaysia Old Land in the Triassic.

Late Cretaceous Transpressional Fault System: A Case Study of the Yishu Fault Belt, Shandong Province, Eastern China

On the basis of field observations of the structures of three profiles from the Linshu region, deformation characteristics and the tectonic background of the Yishu fault belt in the Late Cretaceous–Early Cenozoic have been discussed in detail.Three structural profiles, whose deformations consist mainly of earlier transpressional faults and later normal faults, were developed for the Mengtuan Formation of the Lower Cretaceous Dasheng Group.Typical positive flower structures, duplex structures, and break-through faults were found in these profiles.On the basis of analyses of the structural deformation and previous geochronological studies, it was concluded that the earlier transpressional faults of the profiles were triggered by the sinistral transpression of the Yishu fault belt in the Late Cretaceous–Early Paleogene, and that the later normal faults, formed during the Late Paleogene–Neogene extension, truncated the earlier transpressional faults.With consideration of the tectonic evolution of the Tan-Lu fault belt and the different drift directions of the Pacific plate since the Cretaceous, we suggest that the major tectonic events of the Late Cretaceous–Neogene in eastern China were mainly controlled by the subduction of the Pacific plate.

A DEEP SEISMIC REFLECTION PROFILE ACROSS ALTUN FAULT BELT

Altun fault is regarded as a large\|scale sinistral strike\|slip fault, it is composed of several faults with the different character, and there is a special geological structure in the fault belt, and they constitute the northwestern margin fault belt of the Qinghai\|Tibetan plateau. In order to investigate the deep crust structure in the Altun region, layers which Tarim lithosphere subducted beneath the Qinghai\|Tibetan plateau, the forward structure of the subduction plate and the scale of the plate subduction, a deep seismic reflection profile was designed. Data collection work of the deep seismic reflection profile across Altun fault was completed during 24/8/1999 to 25/9/1999. The profile locates in Qiemo county, Xinjiang Uygur Autonomous Region, the southern end of the profile stretches into Altun Mountains, the northern end locates in the Tarim desert margin. The profile is nearly SN trending and crosses the main Altun fault. The profile totally is 145km long, time record is 30 seconds, the smallest explosive amount is 72～100kg, the biggest explosive amount reaches 200～300kg, the explosive distance is 800m, and detectors are laid at a 50m distance.

Rock Deformation,Component Migration and 18O/16O Variations during Mylonitization in the Southern Tan-Lu Fault Belt

This paper discusses the relationship between the volume loss, fluid flow and component variations in the ductile shear zone of the southern Tan-Lu fault belt. The results show that there is a large amount of fluids flowing through the shear zone during mylonitization, accompanied with the loss of volume of rocks and variations of elements and oxygen isotopes. The calculated temperature for mylonitization in different mylonites ranges from 446 to 484℃, corresponding to that of 475 to 500℃ for the wall rocks. The condition of differential stress during mylonization has been obtained between 99 and 210 MPa, whereas the differential stress in the wall rock gneiss is 70-78 MPa. The mylonites are enriched by factors of 1.32-1.87 in elements such as TiO2, P2O5, MnO, Y, Zr and V and depleted in SiO2, Na2O, K2O, Al203, Sr, Rb and light REEs compared to their protolith gneiss. The immobile element enrichments are attributed to enrichments in residual phases such as ilmentite, zircon, apatite and epidote in mylonites and are interpreted as due to volume losses from 15% to 60% in the ductile shear zone. The largest amount of SiO2 loss is 35.76 g/100 g in the ductile shear zone, which shows the fluid infiltration. Modeling calculated results of the fluid/rock ratio for the ductile shear zone range from 196 to 1192 by assuming different degrees of fluid saturation. Oxygen isotope changes of quartz and feldspar and the calculated fluid are corresponding to the variations of differential flow stress in the ductile shear zone. With increasing differential flow stress, the mylonites show a slight decrease of δ^18O in quartz, K-feldspar and fluid.

Late Paleozoic Element Migration and Accumulation under Intracontinental Sinistral Strike-slip Faulting in the West Junggar Orogenic Belt, NW China

The migration,accumulation and dispersion of elements caused by tectonic dynamics have always been a focus of attention,and become the basis of tectono-geochemistry.However,the effects of faulting,especially strike-slip faulting,on the adjustment of geochemical element distribution,are still not clear.In this paper,we select the West Junggar Orogenic Belt(WJOB),NW China,as a case study to test the migration behavior of elements under tectonic dynamics.The WJOB is dominated by NE-trending large-scale sinistral strike-slip faults such as the Darabut Fault,the Mayile Fault,and the Baerluke Fault,which formed during the intracontinental adjustment under N-S compression during ocean-continental conversion in the Late Paleozoic.Geochemical maps of 13 elements,Al,W,Sn,Mo,Cu,Pb,Zn,As,Sb,Hg,Fe,Ni,and Au,are analyzed for the effects of faulting and folding on element distribution at the regional scale.The results show that the element distribution in the WJOB is controlled mainly by two mechanisms during tectonic deformation:first is the material transporting mechanism,where the movement of geological units is consistent with the direction of tectonic movement;second is the diffusion mechanism,especially by tectonic pressure dissolution driven by tectonic dynamics,where the migration of elements is approximately perpendicular or opposite to the direction of tectonic movement.We conclude that the adjustment of element distributions has been determined by the combined actions of transporting and diffusion mechanisms,and that the diffusion mechanism plays an important role in the formation of geochemical Au blocks in the WJOB.

Characteristics of Compositional Migration in Mylonites from the Ductile Shear Zones of the Southern Tancheng-Lujiang Fault Belt, Eastern Anhui Province

On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.

Geochemical characteristics of the fluid inclusions in the Gangxi Fault Belt, Huanghua Depression, Bohai Bay Basin, China

We studied the geochemical characteristics of the fluid inclusions in the Ordovician carbonates and the Oligocene Shahejie Formation sandstones from 15 wells in the Gangxi Fault Belt, Huanghua Depression. The fluid inclusions are all sec- ondary with gas/liquid ratio of 5%~10%. Base on Raman they are mainly composed of H2O, CO2 and CH4. The homogenization temperatures, combined with burial and geothermal history of the host rock, indicate that the fluid flows in the Shahejie Formation and the Ordovician carbonates were trapped in Neocene. Using a VG5400 mass spectrometer, the helium isotopic compositions were analyzed. Interpretation of results suggested a significant amount of mantle-derived helium mainly accumulating in the intersections of the NWW trending Xuzhuangzi and NE trending Gangxi faults. The maturity of hydrocarbon decreases from the intersection to the outside pointing out that the fluid related to the NWW trending Xuzhuangzi and NE trending Gangxi faults. These factors implied the fluid inclusions have a close relationship to the local tectonic setting. Gangxi Fault Belt experienced intensive Neo-tectonic activities in Cenozoic. Widespread faulted-depressions and strong volcanic eruptions manifested its tec- tonic status of extensional stress field. Mantle uplift caused the movement of magma that carried mantle-derived gases and deep heat flows, the deep-rooted tension faults provided the passages for the gases and heat flows to shallow crust levels.

Tectonic implication of geomorphometric analyses along the Saravan Fault: evidence of a difference in tectonic movements between the Sistan Suture Zone and Makran Mountain Belt

In this paper, remote sensing techniques,as well as field studies, have been used to investigate the geomorphological processes and landscape evolution along the Saravan Fault, SE Iran to highlight how topographic features were influenced by active tectonics. Quantitative geomorphic analysis was carried out using mountain-front sinuosity(Smf),valley floor width-valley height ratio(Vf), drainage basin asymmetry factor(Af), Hypsometric integral(Hi), drainage basin shape index(Bs), mean axial slope of channel(MASC), standard deviation of topography(STD) and index of active tectonic(Iat).Remote sensing techniques, as well as field studies revealed that the Saravan Fault have three parts trending N-S, NW-SE, and E-W. Obtained results show that basins with high Iat index are located at where the strike of the Saravan Faults changes and where several strike-slip faults are crossed the Saravan fault.

Earthquake triggering and delaying caused by fault interaction on Xianshuihe fault belt, southwestern China

The coseismic Coulomb stress change caused by fault interaction and its influences on the triggering and delaying of earthquake are briefly discussed. The Xianshuihe fault belt consists of Luhuo, Daofu, Kangding, Qianning and Ganzi fault. Luohuo (MS=7.6, 1973)-Kangding (MS=6.2, 1975)-Daofu (MS=6.9, 1981)-Ganzi (MS=6.0, 1982) earthquake is a seismic sequence continuous on the time axis with magnitude greater than 6.0. They occurred on the Luhuo, Kangding, Daofu and Ganzi fault, respectively. The coseismic Coulomb stress changes caused by each earthquake on its surrounding major faults and microcracks are calculated, and their effects on the triggering and delaying of the next earthquake and aftershocks are analyzed. It is shown that each earthquake of the sequence occurred on the fault segment with coseismic Coulomb stress increases caused by its predecessors, and most after-shocks are distributed along the microcracks with relatively larger coseismic Coulomb stress increases resulted from the main shock. With the fault interaction considered, the seismic potential of each segment along Xianshuihe fault belt is reassessed, and contrasted with those predicted results ignoring coseismic Coulomb stress change, the significance of fault interaction and its effect on triggering and delaying of earthquake are emphasized. It is con-cluded that fault interaction plays a very important role on seismic potential of Xianshuihe fault belt, and the maximal change of future earthquake probability on fault segment is up to 30.5%.

Calculation of the CO2 Degassing during Contact Metamorphism and Its Geological Significance:The Model and Example from the Shuanshan Area of the South Tan-Lu Fault Belt

The paper studies CO2 degassing and controlling factors under the condition of contact metamorphism in the Shuangshan area, southern Tan-Lu fault belt and the method of calculating the amount of CO2 degassing. The results show that the amount of CO2 degassing is controlled by the characteristics of the country rocks, including the thermal conductivity, penetrability, porosity and connectivity. Compositions, size and depth of intrusive rock also have an important influence on CO2 degassing, i.e., they generated numerous cracks in the country rocks, and thus allowed the easy flow and accumulation of fluids. The amount of CO2 flux in contact metamorphism is calculated quantitatively based on the metamorphic reaction and time-integrated fluid flux. The value （0.729- 2.446×10^4 mol/cm^2） of CO2 flux suggests that CO2 was provided mainly by the contact metamorphic reaction. The generation and releasing of CO2 are positively correlated with the degree of metamorphism, and XCO2 in fluids gradually increases from dolomite zone to calcite zone, but in the zone of grossular, fluid flux is the largest and XCO2 sharply decreases due to involvement of magmatic water. This study presents evidence that a large amount of industrial-scale CO2 can be produced during contact metamorphism. On the basis of theoretical and practical studies, a cone model has been proposed to response CO2 degassing for the contact metamorphism, and it can be used to explore CO2 accumulations beyond the oil-gas basins. This model can also be applied to the study of inorganic genesis of CO2 accumulations.

A study on neogene volcanic landforms of the middle Tanlu fault belt

The west block of the middle belt of TanLu fault belt is one of the areas where volcanic landforms are mainly distributed. This paper divides the volcanic landforms into four grades according to formation, morphology, and ingredient of matter. Lava cones are divided into two types based on the force of top-support and the fluid form of magma: the arc-projecting type and spring-spilling type. Furthermore, the courses of development of volcanic landforms are divided into three stages according to the form and strength of volcanic activities.

Fault zone trapped waves at Longmenshan fault belt

Trapped waves in different sections of Longmenshan fault belt were observed, and the results show the difference between the northern and southern portions of this fault belt. Guanzhuang and Leigu surveying lines are located at the northern portion of the fault belt, and the result indicates that the width of the rupture zone underground in this area is about 160 - 180 m. The center position of rupture zone underground corresponds to the surface breaking trace, and is equally distributed at the edges of the two fault walls. However, Hongkou surveying line is located at the southern portion of the fault belt, and the result indicates that the width of the rupture zone underground in this area is about 180 -200 m. The rupture zone underground is mainly distributed below fault scarp. The Wenchuan MsS. 0 earthquake and Lushan Ms7.0 earthquake both occurred at the Longmenshan fault belt. The results will provide information for the structure background of the two violent earthquakes.

DEFORMATION CHARACTERISTICS AND ESR DATING OF ANHUA-XUPU FAULT BELT IN THE XUEFENG MOUNATAINS, HUNAN

Anhua-Xupu fault belt plays a very important role in the formation of Xuefeng Mountains. The fault belt shows an arc-structure extruding towards NW. Fault rocks, microstructures and homogeneous temperature (concentrated around 160°C) of fluid inclusions in the quartz veins shows that the fault belt mainly underwent shallow brittle deformation and the highest-grade dynamic metamorphic rock is mylonitized sericite phyllite. The ESR (Electron Spin Resonance) dating from the quartz veins in the fault rocks shows that the fault belt underwent two intense fluid movement stages at Yanshanian (156.9～136.2Ma, 119.8～90.6Ma); moreover not only the occurrence and microstructures but also the homogeneous temperature of the quartz veins developed in that two stages show obvious diversity,which can prove that there exists the reversion period of Mesozoic extension and compression movement of Xuefeng mountains between these two stages.

Cenozoic Denudation and Vertical Faulting History of the Central Segment of the Longmenshan Thrust Belt

Objective The uplift process and uplift mechanism of the Tibetan Plateau has been a research focus among geologists in recent years. This work put emphasis on the Cenozoic exhumation histories of the blocks bounded by the major faults at the central segment of the Longmenshan thrust belt, and the vertical faulting history, including the starting time and the total vertical displacement, of the major faults. Then we quantitatively established a complete active process for the central segment of the Longmenshan thrust belt, combining with the previous geophysical data in the deep and geologcial data. This study is critical for deeply and completely understanding the Cenozoic uplift history of the Longmenshan, and also provides thermochronology constraints to the different models for the uplift of the eastern margin of the Tibetan Plateau.

Geodetic constraints on contemporary three-dimensional crustal deformation in the Laji Shan—Jishi Shan tectonic belt

The Laji Shan—Jishi Shan tectonic belt(LJTB),located in the southern part of the northeastern Tibetan Plateau(NETP),is a tectonic window to reveal regional tectonic deformation in the NETP.However,its kinematics in the Holocene remains controversial.We obtain the latest and dense horizontal velocity field based on data collected from our newly constructed and existing GNSS stations.Combined with fault kinematics from geologic observations,we analyze the crustal deformation characteristics along the LJTB.The results show that:(1)The Laji Shan fault(LJF)is inactive,and the northwest-oriented Jishi Shan fault(JSF)exhibits a significant dextral and thrust slip.(2)The transpression along the arc-shaped LJTB accommodates deformation transformation between the dextral Riyue Shan fault and the sinistral west Qinling fault.(3)With the continuous pushing of the Indian plate,internal strains in the Tibetan Plateau are continuously transferred in the northeast via the LJTB as they are gradually dissipated near the LJTB and translated into significant crustal uplift in these regions.

全球天然氢气勘探开发利用进展及中国的勘探前景

在全球能源脱碳背景下,天然氢气作为一种一次能源,因其零碳、可再生的优点而备受关注,但中国目前还未开展专门针对天然氢气的勘探工作。通过介绍全球已知高含量天然氢气(体积分数大于10%)气藏的主要形成地质环境及成因类型,系统总结了天然氢气富集的有利地质条件,并结合国外天然氢气的勘探开发现状,评价了中国天然氢气的勘探前景。研究结果表明:(1)全球高含量天然氢气主要发育于蛇绿岩带、裂谷和前寒武系富铁地层中,且以无机成因为主,富铁矿物的蛇纹石化过程是天然氢气最主要的成因来源,其次为地球深部脱气和水的辐解。(2)优质的氢源与良好的运移通道是氢气富集的前提,而盖层的封盖能力是天然氢气能否成藏的关键要素;天然氢气作为伴生气时,传统盖层对其具备封盖能力,但当其含量较高时,传统盖层可能难以形成有效封盖;裂谷环境、蛇绿岩发育区以及断裂发育的前寒武系富铁地层是富氢气藏的勘探有利区。(3)国外多个国家和地区已制定了天然氢气的勘探开发和利用计划,其中,马里已实现天然氢气的商业开采,美国、澳大利亚也已成功钻探天然氢气勘探井。(4)中国高含量氢气区与富氢地质条件高度匹配,天然氢气勘探前景良好,郯庐断裂带及周缘裂陷盆地区、阿尔金断裂带及两侧盆地区、三江构造带—龙门山断裂带及周缘盆地区的天然氢气勘探潜力较大;中国应尽快开展天然氢气普查工作,加强氢气成藏过程研究和潜力评价,并进行勘探技术、开采分离技术和储运技术的攻关,为天然氢气的大规模开发利用做好技术储备。

金湖凹陷基性岩捕获锆石年龄及其区域构造意义

郯庐断裂带的形成演化是中国东部中生代关键大地构造事件,该断裂带起源机制问题是了解华南与华北板块汇聚过程与方式的基本前提。本文利用郯庐断裂带东侧金湖凹陷内7个新生代基性岩样品394个点的LA-ICP-MS锆石U-Pb年代学数据,在分析岩浆活动时代基础上,利用捕获锆石年龄信息探讨了大别造山带的古生代演化及郯庐断裂带起源机制问题,为认识上述问题提供了一个全新的视角。研究表明,金湖凹陷的基性岩浆活动时代为古近纪早期(66.1~56.5 Ma),与围岩的沉积时代吻合;基性岩中的捕获锆石来自大别造山带,是印支期板块碰撞造山中楔入郯庐断裂带东侧华南板块的造山带物质,具有华南板块、北淮阳和华北板块的混杂岩石圈信息;捕获锆石中445 Ma(变质锆石)、290 Ma(岩浆锆石)及214 Ma(变质锆石)等峰值年龄信息指示古生代以来北淮阳构造带经历了与北秦岭构造带类似的弧—陆俯冲、碰撞历程,暗示秦岭造山带的二郎坪洋、商丹洋和勉略洋可延伸至大别造山带东端;年代学数据及构造分析支持郯庐断裂带起源于嵌入碰撞背景下的华南板片撕裂边界,其起源形式为陆—陆碰撞下的板块斜向汇聚边界。

新疆克拉玛依乌尔禾张扭性走滑断裂特征及其控藏作用研究

乌尔禾沥青矿断裂带位于准噶尔盆地西北缘乌夏断裂带乌尔禾鼻隆之上,是一个小型左旋走滑断裂带。断裂带形成后未发生强烈改造,断裂带内发育沥青矿脉,露头地质条件好,且有三维地震覆盖,是研究走滑断裂特征和控藏作用的天然实验室。本文采用无人机三维立体建模技术,结合野外剖面实测,对乌尔禾沥青矿走滑断裂带野外剖面露头进行定量分析和解剖。结果表明,沥青矿断裂带共发育17条断层,主断层西北侧断层呈雁列状分布,东南侧断层呈马尾状,断裂带纵向呈负花状。研究表明,断层形成于燕山期左旋剪切应力场,受拉张应力影响,整体处于张扭环境,形成张扭性走滑断裂带。断层发育空腔和诱导裂缝,尤其主动盘裂缝更为发育,空腔的开度与油气侵染宽度呈正相关。结合塔里木盆地张扭性走滑断裂与油气藏关系分析,本文认为张扭性走滑断裂是良好的垂向油气运移通道,主动盘具有侧向输导作用,被动盘具有封堵作用,走滑断裂主动盘一侧圈闭是良好的油气聚集区域。

渝东南地区南川区块膝折构造模式解析

近年来,南川区块逆冲推覆构造带下志留统龙马溪组页岩气勘探开发取得重大突破。截至2022年底,南川区块已完钻170口井,累计产气量51.6×10^(8) m^(3)。随着滚动开发的逐步推进,开发区域也由主体构造简单区向两翼构造复杂区过渡,前期的构造解释方案将南川区块各构造单元解释为大断距逆断层夹持的断背斜,并没有深入分析整个构造带的构造变形特征,因此,近年部署的几口扩边评价井存在较大的井震矛盾,造成了多口井的钻探失利,限制了页岩气开发产建的进程。综合前期钻探认识及正演模拟分析,认为南川区块龙马溪组地震剖面上显示的大断距高角度逆冲断层多为构造假象,断裂区多为高陡膝折构造,断距小、地层陡。通过高陡构造假象分析与识别,结合断层相关褶皱理论完善解释成果,井震联合构造建模逐步落实了南川区块龙马溪组气藏的构造特征,进而提出了高陡膝折带是龙马溪组页岩气勘探开发的潜在有利目标,在此基础上部署的5口评价井,均取得了较好的测试效果。