In our current work,AZ31 magnesium alloy foams with closed-cell were successfully fabricated by melt foaming method using Ca and CaCO3 as thickening and blowing agent,respectively.The influences of porosity and pore s...In our current work,AZ31 magnesium alloy foams with closed-cell were successfully fabricated by melt foaming method using Ca and CaCO3 as thickening and blowing agent,respectively.The influences of porosity and pore size on the quasi-static compressive properties of the foams were systematically investigated.The results showed that the yield strength,energy absorption capacity and ideality energy absorption efficiency were decreased with the increase in porosity.However,specimens with porosities of 60%,65%and 70%possessed similar total energy absorption capacity and ideality energy absorption efficiency.Meanwhile,experimental results showed that mean plateau strength of the foams was increased first and then decreased with increase in mean pore size.In addition,energy absorption capacities were almost the same in the initial stage,while the differences were obvious in the middle stage.From the engineering point of view,the specimens with mean pore size of 1.5 mm possess good combination of mean plateau strength and energy absorption characteristics under the present conditions.展开更多
The Gibbs-Bogoliubov （GB） inequality is applied to investigate the thermodynamic properties of some equiatomic noble metal alloys in liquid phase such as Au-Cu, Ag-Cu, and Ag-Au using well recognized pseudopotential...The Gibbs-Bogoliubov （GB） inequality is applied to investigate the thermodynamic properties of some equiatomic noble metal alloys in liquid phase such as Au-Cu, Ag-Cu, and Ag-Au using well recognized pseudopotential formalism. For description of the structure, well known Percus-Yevick （PY） hard sphere model is used as a reference system. By applying a variation method the best hard core diameters have been found which correspond to minimum free energy. With this procedure the thermodynamic properties such as entropy and heat of mixing have been computed. The influence of local field correction function viz; Hartree （H）, Taylor （T）, lehimaru-Utsumi （IU）, Farid et al. （F）, and Sarkar et al. （S） is also investigated. The computed results of the excess entropy compares favourably in the case of liquid alloys while the agreement with experiment is poor in the case of heats of mixing. This may be due to the sensitivity of the heats of mixing with the potential parameters and the dielectric function.展开更多
A simple creep testing method is presented which involves using coiled specimens. With this method, a single experiment can give all the data required for a plot of strain rate versus stress. The value of the stress-e...A simple creep testing method is presented which involves using coiled specimens. With this method, a single experiment can give all the data required for a plot of strain rate versus stress. The value of the stress-expo-nent of room temperature steady-state creep a Pb-61. 5wt %Sn solder was measured in this way to be 1. 06,aselected from a diffusion creep mechanism.展开更多
Metal-matrix composites reinforced with shape memory alloys （SMA, including long fiber, short fiber, and particle） are ＂intelligent materials＂ with many special physical and mechanical properties, such as high dam...Metal-matrix composites reinforced with shape memory alloys （SMA, including long fiber, short fiber, and particle） are ＂intelligent materials＂ with many special physical and mechanical properties, such as high damping property, high tensile strength, and fatigue resistance. In this review article, the fabrication method, microstructure, interface reaction, modeling, and physical and mechanical properties of the composites are addressed. Particular emphasis has been given to （a） fabrication and microstructure of aluminum matrix composites reinforced with SMAs, and （b） shape memory effect on the physical and mechanical properties of the composites. While the bulk of the information is related to aluminum matrix composites, important results are now available for other metal-matrix composites.展开更多
基金The present authors thanks to the financial support provided by International Science&Technology Cooperation Program of China(2010DFA51850)“863”project of China(NO.2013AA031002),Major Project of China(2013ZX04004027)+3 种基金the‘100 Talents Project’of Hebei Province of China(Grant No.E2012100009)Natural Science Foundation of Hebei Province of China(No.E2012202017)Science and Technology Project of Hebei Province(13211008D)Science and Technology Research of Hebei Province for Youth fund(No.2011182).
文摘In our current work,AZ31 magnesium alloy foams with closed-cell were successfully fabricated by melt foaming method using Ca and CaCO3 as thickening and blowing agent,respectively.The influences of porosity and pore size on the quasi-static compressive properties of the foams were systematically investigated.The results showed that the yield strength,energy absorption capacity and ideality energy absorption efficiency were decreased with the increase in porosity.However,specimens with porosities of 60%,65%and 70%possessed similar total energy absorption capacity and ideality energy absorption efficiency.Meanwhile,experimental results showed that mean plateau strength of the foams was increased first and then decreased with increase in mean pore size.In addition,energy absorption capacities were almost the same in the initial stage,while the differences were obvious in the middle stage.From the engineering point of view,the specimens with mean pore size of 1.5 mm possess good combination of mean plateau strength and energy absorption characteristics under the present conditions.
文摘The Gibbs-Bogoliubov （GB） inequality is applied to investigate the thermodynamic properties of some equiatomic noble metal alloys in liquid phase such as Au-Cu, Ag-Cu, and Ag-Au using well recognized pseudopotential formalism. For description of the structure, well known Percus-Yevick （PY） hard sphere model is used as a reference system. By applying a variation method the best hard core diameters have been found which correspond to minimum free energy. With this procedure the thermodynamic properties such as entropy and heat of mixing have been computed. The influence of local field correction function viz; Hartree （H）, Taylor （T）, lehimaru-Utsumi （IU）, Farid et al. （F）, and Sarkar et al. （S） is also investigated. The computed results of the excess entropy compares favourably in the case of liquid alloys while the agreement with experiment is poor in the case of heats of mixing. This may be due to the sensitivity of the heats of mixing with the potential parameters and the dielectric function.
文摘A simple creep testing method is presented which involves using coiled specimens. With this method, a single experiment can give all the data required for a plot of strain rate versus stress. The value of the stress-expo-nent of room temperature steady-state creep a Pb-61. 5wt %Sn solder was measured in this way to be 1. 06,aselected from a diffusion creep mechanism.
基金financially supported by the National Natural Science Foundation of China (Nos.51101155 and 51331008)the National Basic Research Program of China (No.2012CB619600)
文摘Metal-matrix composites reinforced with shape memory alloys （SMA, including long fiber, short fiber, and particle） are ＂intelligent materials＂ with many special physical and mechanical properties, such as high damping property, high tensile strength, and fatigue resistance. In this review article, the fabrication method, microstructure, interface reaction, modeling, and physical and mechanical properties of the composites are addressed. Particular emphasis has been given to （a） fabrication and microstructure of aluminum matrix composites reinforced with SMAs, and （b） shape memory effect on the physical and mechanical properties of the composites. While the bulk of the information is related to aluminum matrix composites, important results are now available for other metal-matrix composites.
