Numerical analysis of hydraulic fracture propagation in deep shale reservoir with different injection strategies

Deep shale reservoirs are characterized by elevated breakdown pressures,diminished fracture complexity,and reduced modified volumes compared to medium and shallow reservoirs.Therefore,it is urgent to investigate particular injection strategies that can optimize breakdown pressure and fracturing efficiency to address the increasing demands for deep shale reservoir stimulation.In this study,the efficiency of various stimulation strategies,including multi-cluster simultaneous fracturing,modified alternating fracturing,alternating shut-in fracturing,and cyclic alternating fracturing,was evaluated.Subsequently,the sensitivity of factors such as the cycle index,shut-in time,cluster spacing,and horizontal permeability was investigated.Additionally,the flow distribution effect within the wellbore was discussed.The results indicate that relative to multi-cluster simultaneous fracturing,modified alternating fracturing exhibits reduced susceptibility to the stress shadow effect,which results in earlier breakdown,extended hydraulic fracture lengths,and more consistent propagation despite an increase in breakdown pressure.The alternating shut-in fracturing benefits the increase of fracture length,which is closely related to the shut-in time.Furthermore,cyclic alternating fracturing markedly lowers breakdown pressure and contributes to uniform fracture propagation,in which the cycle count plays an important role.Modified alternating fracturing demonstrates insensitivity to variations in cluster spacing,whereas horizontal permeability is a critical factor affecting fracture length.The wellbore effect restrains the accumulation of pressure and flow near the perforation,delaying the initiation of hydraulic fractures.The simulation results can provide valuable numerical insights for optimizing injection strategies for deep shale hydraulic fracturing.

Cost-effectiveness Analysis of Insulin Degludec and Liraglutide Injection in the Treatment of Type 2 Diabetes

Objective To analyze the cost-effectiveness of insulin degludec and liraglutide injection(IDegLira)compared with insulin glargine plus insulin aspart(IGar plus IAsp)in the treatment of type 2 diabetes mellitus(T2DM)based on the price of IDegLira before and after it was successfully admitted to the National Reimbursable Drug List(NRDL).Methods Cost and effectiveness parameters were obtained through systematic retrieval from PubMed,ScienceDirect,CNKI,and Wanfang database.A cost-effectiveness analysis(CEA)model was established to analyze the economics using IDegLira for T2DM patients with 1 to 5 years of medication.Results and Conclusion Before IDegLira was admitted to NRDL,its economic advantages over the IGlar plus Iasp regimen became more significant as patients’medication time prolonged.After being admitted to NRDL,with 1 year of medication,the medical cost of IDegLira decreased by 2853.91 yuan and the quality adjusted life years(QALY)increased by 0.12055 than IGar plus IAsp.The sensitivity analysis was highly consistent with the results of the baseline result.After being admitted to NRDL,for patients with T2DM who have poor blood glucose control,IDegLira is absolutely an economic advantage scheme compared with IGar plus IAsp.

Design & Test of an Advanced Web Security Analysis Tool (AWSAT)

Considering the escalating frequency and sophistication of cyber threats targeting web applications, this paper proposes the development of an automated web security analysis tool to address the accessibility gap for non-security professionals. This paper presents the design and implementation of an automated web security analysis tool, AWSAT, aimed at enabling individuals with limited security expertise to effectively assess and mitigate vulnerabilities in web applications. Leveraging advanced scanning techniques, the tool identifies common threats such as Cross-Site Scripting (XSS), SQL Injection, and Cross-Site Request Forgery (CSRF), providing detailed reports with actionable insights. By integrating sample payloads and reference study links, the tool facilitates informed decision-making in enhancing the security posture of web applications. Through its user-friendly interface and robust functionality, the tool aims to democratize web security practices, empowering a wider audience to proactively safeguard against cyber threats.

STRESS ANALYSIS OF INJECTION MOLDED PARTS IN POST-FILLING STAGE

The linear isothermo-viscoelastic constitutive equation is established according to the principle of viscoelastic mechanics. Given the boundary conditions of the temperature field, the linear thermo-viscoelastic constitutive equation is established acording to the analysis of the thermorheologically simple. The stress analysis model is constructed on the base of some reasonable hypotheses which consider the restraint conditions of mold and the characteristics of injection molding in the post-filling stage. The mathematical model is calculated by the finite difference method. The results can help to predict the warpage of plastic products.

Extracting the core indicators of pulverized coal for blast furnace injection based on principal component analysis

An updated approach to refining the core indicators of pulverized coal used for blast furnace injection based on principal component analysis is proposed in view of the disadvantages of the existing performance indicator system of pulverized coal used in blast furnaces. This presented method takes into account all the performance indicators of pulverized coal injection, including calorific value, igniting point, combustibility, reactivity, flowability, grindability, etc. Four core indicators of pulverized coal injection are selected and studied by using principal component analysis, namely, comprehensive combustibility, comprehensive reactivity, comprehensive flowability, and comprehensive grindability. The newly established core index system is not only beneficial to narrowing down current evaluation indices but also effective to avoid previous overlapping problems among indicators by mutually independent index design. Furthermore, a comprehensive property indicator is introduced on the basis of the four core indicators, and the injection properties of pulverized coal can be overall evaluated.

Fingerprint analysis of placenta polypeptide injection by high performance liquid chromatography

Objective: To develop the representative fingerprint for the quality control of placenta polypeptide injection. Methods: The chromatographic separation was performed using a Phenomenex Gemini C18 column (250 mm 4.6 mm, 5 mm) maintained at 30 1C. 0.1% aqueous trifiuoroacetic acid (Solvent A) and acetonitrile contained 0.1% TFA (Solvent B) were used as mobile phase with a gradient elution. Detection wavelength was 280 nm with the sample injection volume of 50 mL; the fiow rate was 1.0 mL/min. The fingerprints of different samples were investigated by similarity analysis. Results: Nine peaks were identified as the characteristic common peaks. The similarities of the fingerprints of the 10 batches of samples were above 0.992. Conclusion: This method showed high precision and good repeatability, and provided the basis for the improvement of the quality control of placenta polypeptide injection.

Study on Chemiluminescence Reactions of L ucigenin and Reductants by Flow Injection Analysis

The chemiluminescence reactions between lucigenin and reductants such as Mo(LII),V( II), U(III), W(III), Cr(II), Ti(III) and Fe( II), which were produced on-line by passing Mo(VI),V(V),U(VI), W(VI), Cr(VI,III),Ti(IV) and Fe(III) through a micro Jones column, are studied in detail. Results show that the reactions can be used directly for the determination of these substances. The mechanism of the reactions is also investigated.

Analysis of Mechanical Properties of Injection Molded Short Glass Fibre (SGF)/Calcite/ABS Composites

Acrylonitrile-butadiene-Styrene (ABS), with and without calcium carbonate (calcite) particles,was used as the matrix for reinforcement with as-received short-glass fibres (were originallytreated by the manufacturer) and sized short-glass fibres with two amino-silane coupling agents.The calcite particle content is 0, 11.7 and 23.5 vol. pct for the matrices. The glass fiber contentis 0, 10 and 15 vol. pct. The matrix materials and corresponding composites were compoundedusing a twin screw extruder and dumbbell-shaped tensile bars were prepared with an injectionmolding process. The tensile and flexural properties as well as the unnotched and notchedCharpy impact energies of short glass fibre/calcite/ABS composites were studied in this paper.The effects of fibres, fibre surface treatments and particles on these mechanical properties ofthe composites were discussed in detail. An importarit information was obtained, which is thatthe tensile and flexural strengths of hybrid SGF/calcite/ABS composites are the same as thoseof corresponding fibre composites when the ratio of the interfacial adhesion strength betweenparticles and matrix to that between fibres and matrix is higher than certain value. otherwise theformer are lower than the latter.

Analysis of Solidification in Spray Atomized and Codeposited Metal-matrix Composites Part Ⅱ:Reinforcement Injection and Deposition

The influence of the injection of reinforcing particles (for the production of metal matrix composites and of the droplets-to-substrate heat transfer on the resulting microstructural uniformity of spray atomized and codeposited composite material is analyzed. The reinforcement particles injection velocity has to be limited between an upper and a lower critical values. in order to ensure entrapment into the matrix droplets in flight. The thermal history of the injected droplets during the deposition stage is calculated with the assumption that the in-flight solidifying droplets reach the substrate while containing still at least 20% liquid volume fraction, in order to avoid porosity of the deposited material. The substrate to pouring-tube orifice distance where that condition is achieved depends strongly on the atomization pressure and the convective heat transfer coefficient of the substrate. It is demonstrated that 'tailoring' the microstructures and the reinforcement volume percent in the deposited material is feasible. The critical process parameters : the atomization pressure, the melt flow rate. the substrate to pouring-tube orifice distance, the reinforcement particles injection location and rate can all be adequately chosen in order to obtain any desired microstructure, grain size, reinforcement volume percent, with the additional benefit, if wanted, of rapid solidification processing

Intraocular pressure elevation after intravitreal triamcinolone acetonide injection: a Meta-analysis

AIM：To report on intraocular pressure（IOP）after intravitreal injections of triamcinolone acetonide.·M ETHODS：Systematic literature review of studies that investigated the effects of an injection of triamcinolone Intravitreal triamcinolone acetonide on IOP was conducted according to the Cochrane Collaboration methodology and the reported effects have been analyzed with Meta-analysis.·RESULTS：We found that the IOP follows an inverted-U shape pattern over time starting with an average value of14.81±1.22 mm Hg before the injection,rising to a maximum of 19.48±2.15 mm Hg after one month of injection and falling down to 16.16±1.92 mm Hg after6mo.Moreover,country of study,age,previous history of glaucoma and gender compositions matter for crossstudy were different in reported IOP changes.·CONCLUSION：Our findings may be helpful in determining pressure elevation risk of intravitreal triamcinolone acetonide therapy as well as comparing it with those of more recent therapies such as the antivascular endothelial growth factor agents.

Meta-analysis of neostigmine injections given at the Zusanli （ST 36） acupoint in thetreatment of postpartum urinary retention

Objective： We aimed to determine the effect of neostigmine injections given at the Zusanli （ST 36） acupoint whentreating postpartum urinary retention. Methods： We conducted a systematic review to identify randomized controlledtrials （RCTs） involving neostigmine injections given at the Zusanli （ST 36） acupoint for treating postpartum urinaryretention. We searched the Cochrane Library, Pubmed, Web of Science, Chinese National Knowledge Infrastructure, VipDatabase, and Chinese Biomedical Literature Database from the creation of the database to December 30, 2016. Bias riskassessment was performed using Revman 5.3 software from Cochrane based on the criteria set out in the CochraneHandbook for Systematic Reviews of Interventions, version 5.1.0. Results： Thirteen studies were included with 627participants in the treatment group and 584 participants in the control group. （1） Overall response rate： neostigmineinjections given at the Zusanli （ST 36） acupoint have a better curative effect than injections given in muscle, odds ratio（OR） = 8.74, 95% confidence interval （CI） [5.83, 13.10], Z = 10.49 （P 〈 0.001）; （2） Comparison of effects at differentdosages： （i） 0.5 mg of neostigmine Zusanli （ST 36） acupoint injection group has better effect than 1 mg of neostigmineintramuscular injection group, OR = 15.84, 95% CI [5.74, 43.72],Z = 5.34 （P 〈 0.001）, （ii） 0.5 mg of neostigmineinjection given at the Zusanli acupoint has a better curative effect than 0.5 mg of neostigmine injection given in muscle ,OR = 7.30, 95% CI [3.47, 15.34], Z = 5.24 （P 〈 0.001）; （iii） 1 mg of neostigmine injection at the Zusanli （ST 36）acupoint has better efficacy than 1 mg of neostigmine injection in muscle, OR = 7.76, 95% CI [4.46, 13.52], Z = 7.25 （P〈 0.001）. Conclusion： Neostigmine injections at the Zusanli （ST 36） acupoint have beneficial effects in treatingpostpartum urinary retention. However, the low quality of the studies included in the meta-analysis raises questions overthe reliability of the results. Further studies are still needed.

Efficacy and safety of Kang’ai injection adjunct with TP chemotherapy for the treatment of non-small cell lung cancer: a systematic review and meta-analysis of randomized controlled trials

Background:Combination therapy with traditional Chinese medicine and chemotherapy was proposed as a therapeutic strategy for non-small cell lung cancer patients.Therefore,we performed a systematic review and metaanalysis of randomized controlled trials to assess effects of this combination therapy on non-small cell lung cancer.To evaluate the efficacy and safety of the Chinese patent medicine Kang’ai injection adjunct with TP chemotherapy in the treatment of non-small cell lung cancer.Methods:A randomized controlled study of the Chinese patent medicine Kang’ai injection adjunct with TP chemotherapy in the databases of China National Knowledge Infrastructure Database,WanFang Database,VIP Database,Sino-Med Database,PUBMED,EMBASE and Cochrane library was searched by computer.The literatures published from the database establishment to July 1,2020 were included in the search scope.After 2 evaluators independently evaluated and cross checked the quality of the study,Revman 5.3 was used to meta analyze the clinical effect of the Chinese patent medicine Kang’ai injection adjunct with TP chemotherapy on patients with non-small cell lung cancer.Results:A total of 1,370 lung cancer patients were included in 20 RCTs.The results of meta-analysis showed that there were significant differences between the 2 groups in clinical efficacy(RR=1.32,95%CI(1.20,1.44)),quality of life(RR=1.44,95%CI(1.32,1.57)),immune function(MD=0.53,95%CI(0.23–0.83)),adverse reactions(RR=0.49,95%CI(0.41,0.58)).Conclusion:The Chinese patent medicine Kang’ai injection adjunct with TP chemotherapy is effective and safe in the treatment of non-small cell lung cancer,and has great prospects for further development.However,the quality of evidence was very low-to-moderate.Considering the poor quality of evidence,we are not very confident in the results.We look forward to more research and update results in the future and improve the evidence quality.

Kinetic-spectrophotometric determination of free cyanide by stopped-flow reversed flow injection analysis

A stopped-flow reversed flow injection method for the determination of free cyanide is proposed. Pyridine-barbituric acid mixture is injected in the flow system as reagent to form the colour species with cyanide. The flow is stopped when the reagent zone comes in the flow cell, where absorbance-time data are collected at 580nm wavelength. The linear range of the determination is 0.1 -10μg/ml CN-. The sampling rate is 60h-1 and the relative standard deviation is 1.6% (n=16) at 5.0 μg/ml CN-1 level. With satisfactory results, the proposed method was applied to the determination of free cyanide in wastewater without sample pretreatment.

A Novel Statistical Analysis for Residual Stress in Injection Molding

Residual stresses can reduce the reliability of plastic injection molding parts. This work is an attempt to model the residual stresses as a function of injection molding parameters. More stress is placed on reducing the number of input factors and to include all possible interactions. For this purpose, two-stage experimentation is suggested: a factor screening stage and Response Surface optimization stage. In screening stage Taguchi 3 level experimental design is used to classify the input parameters as significant and non-significant factors. Eight input variables were classified into 3 non-significant and 5 significant factors using this screening stage. Thus for the Response Surface optimization stage: instead of doing 160 experiments in Central Composite, 56 are only needed after the screening stage in half Central Composite Design. The best subset and regression model fitting tools in addition to model verification using randomly selected input setting were used to select a model for predicting residual stresses with a verified Root Mean Square Error (RSME) of nearly 0.93 MPa.

Flow Injection Analysis of Histidine with Enhanced Electrogenerated Chemiluminescence of Luminol

A simple and sensitive flow injection method is presented for the determination of histidine based on its enhancement of electrogenerated chemiluminescence (ECL) of luminol. After optimization of the experimental parameters, the working range for histidine was in 1.0 x 10-6 to 1.0 x 10 -3 mol/L with a detection limit (S/N = 3) of 0.56 mmol/L. The relative standard deviation was 1.6% for 11 measurements of 5 x 10 5 mol/L histidine solution. The proposed method has been successfully applied to the determination of histidine in real pharmaceutical preparation.

Seismic Response Analysis of Portal Water Injection Sheet Pile

To further the study on the newly developed portal water injection sheet pile under static loads, in this paper, by adopting the nonlinear calculation module of FEM software ANSYS, a model for the interaction between the soil and the sheet piles is set up, and the seismic response analysis for this type of space-retaining structure is performed. The effects of the embedded depth and the distance between the front pile and the back pile on the dynamic characteristics of the portal water injection sheet pile are studied.

Simple Spectrophotometric Sequential Injection Analysis System for Determination of Serum Calcium

A sequential injection analysis (SIA) system for the determination of total calcium in blood has been implemented. The assay principle is based on the arsenazo III method, in which the indicator’s complex with calcium forms a blue-purple colour. The absorbance peak height at 650 nm was proportional to the calcium content in samples. A linear range was obtained from 2.5 - 15 mg?dL–1 (r2 = 0.999), with a detection limit of 0.430 mg?dL–1 (3σ). Magnesium, glucose, hae-moglobin, and bilirubin at 123, 1,000, 50, and 0.5 mg?dL–1, respectively, were not found to interfere with the proposed system significantly (recovery 99.1% - 104.4%). The sampling frequency was 30 h–1, in which the carry-over effect was negligible (0.69%). The proposed SIA system was successfully applied to the determination of calcium from serum samples (r2 = 0.970;n = 30).

Thermal apoptosis analysis considering injection behavior optimization and mass diffusion during magnetic hyperthermia

Thermally induced apoptosis for tumors depends mainly on the intrinsic characteristics of biological tissues as well as treatment temperature profile during magnetic hyperthermia.Further,treatment temperature distribution inside tumor depends on the injection behavior of irregular tumors,such as the injection dose and the injection location of nanofluids.In order to improve the treatment effect,the simulated annealing algorithm is adopted in this work to optimize the nanofluid injection behavior,and the improved Arrhenius model is used to evaluate the malignant ablations for three typical malignant tumor cell models.In addition,both the injection behavior optimization and the mass diffusion of nanofluid are both taken into consideration in order to improve the treatment effect.The simulation results demonstrate that the injection behavior can be optimized effectively by the proposed optimization method before therapy,the result of which can also conduce to improving the thermal apoptosis possibility for proposed typical malignant cells.Furthermore,an effective approach is also employed by considering longer diffusion duration and correct power dissipation at the same time.The results show that a better result can then be obtained than those in other cases when the power dissipation of MNPs is set to be QMNP=5.4×10^(7)W·m^(3) and the diffusion time is 16 h.

Meta-analysis of Shenqi Fuzheng Injection Combined with Chemotherapy in Treatment of Colorectal Cancer

[Objectives] To make a systematic evaluation of the clinical efficacy and safety of Shenqi Fuzheng Injection in the treatment of colorectal cancer. [Methods] Databases,such as China National Knowledge Infrastructure( CNKI),Wanfang,China biomedical literature service system( CBM),CQVIP,Medline,and Cochrane,were searched for the time before April 2017. The randomized controlled trial( RCT) that met the inclusion criteria was screened. Then,quality evaluation was made based on the modified Jadad scale. Data were extracted and meta-analysis was made with the aid of Review Manager 5. 3. [Results] Finally,21 papers met the inclusion criteria,including 2 high quality papers. The average Jadad score was 2. 5 points,1 589 patients were included. Meta-analysis results showed that the intervention of the experimental group could improve the quality of life[OR = 3. 32,95% CI( 2. 33,4. 74),P < 0. 000 01]; improve the short-term efficacy[OR =1. 68,95% CI( 1. 26,2. 24),P =0. 000 4]; reduce the incidence of adverse chemotherapy reactions such as reducing the gastrointestinal reactions[OR = 0. 33,95% CI( 0. 25,0. 43),P < 0. 000 01],reducing myelosuppressive reactions[OR = 0. 33,95% CI( 0. 24,0. 46),P < 0. 000 01]; improve the immune functions,such as increasing CD4/CD8 cell ratio[WMD = 1. 19,95% CI( 0. 24,0. 41),( P <0. 000 01) ],and increasing the number of NK cells[WMD =1. 72,95% CI( 5. 62,14. 30),( P <0. 000 01) ]. [Conclusions]The clinical effect of Shenqi Fuzheng Injection in the treatment of colorectal cancer is better than that of chemotherapy alone,but it needs more highquality RCTs to improve the level of research.

Meta analysis of Xuesaitong injection in the treatment of angina pectoris of coronary heart disease

Objective:To evaluate the efficacy and safety of Xuesaitong Injection in the treatment of angina pectoris.Methods:CNKI and WAN were retrieved Fang,VIP,CBMdisc,PubMed and Cochrane libraries published a randomized controlled trial of Xuesaitong Injection in the treatment of angina pectoris of coronary heart disease from the beginning of the establishment of the database to January 2020.29 cases were finally included in the study through layer by layer selection.The total sample size was 2560 cases,including 1307 cases in the experimental group and 1253 cases in the control group.The data collected were meta analyzed by Revman 5.3 software.Results:on the basis of routine western medicine treatment,Xuesaitong injection was added in the clinical comprehensive effective rate([RR=1.31;95%CI(1.25,1.39)]),angina symptom improvement rate([RR=1.16;95%CI(1.07,1.26)]),ECG improvement rate([RR=1.25;95%CI(1.14,1.38)]),angina attack times([RR=-2.49;95%CI(-3.27,-1.70)]);fibrinogen([MD=-0.61;95%CI(-0.77,-0.45)]),plasma(specific)viscosity([MD=-0.19;95%CI(-0.22,-0.16)]),hematocrit([MD=-0.04;95%CI(-0.05,-0.03)])and other aspects were superior to the conventional treatment of Western medicine,the difference was statistically significant.Safety aspect:the reported adverse reactions were mild and tolerable events such as headache,dizziness,flush,etc.,no serious adverse events,and no separation from the report was found.Conclusion:on the basis of conventional western medicine,Xuesaitong injection can effectively improve the clinical efficacy,and has a high safety.However,due to the low quality of the included study and the small sample size,there is a potential bias in the study;therefore,the application and promotion of the research conclusions need to be cautious,and need to be further verified by more large sample,multicenter,double-blind clinical randomized controlled trials.