The Mesozoic–Cenozoic tectonic movement largely controls the northwest region of the Junggar Basin（NWJB）, which is a significant area for the exploration of petroleum and sandstone-type uranium deposits in China. T...The Mesozoic–Cenozoic tectonic movement largely controls the northwest region of the Junggar Basin（NWJB）, which is a significant area for the exploration of petroleum and sandstone-type uranium deposits in China. This work collected six samples from this sedimentary basin and surrounding mountains to conduct apatite fission track（AFT） dating, and utilized the dating results for thermochronological modeling to reconstruct the uplift history of the NWJB and its response to hydrocarbon migration and uranium mineralization. The results indicate that a single continuous uplift event has occurred since the Early Cretaceous, showing spatiotemporal variation in the uplift and exhumation patterns throughout the NWJB. Uplift and exhumation initiated in the northwest and then proceeded to the southeast, suggesting that the fault system induced a post spread-thrust nappe into the basin during the Late Yanshanian. Modeling results indicate that the NWJB mountains have undergone three distinct stages of rapid cooling： Early Cretaceous（ca. 140–115 Ma）, Late Cretaceous（ca. 80–60 Ma）, and Miocene–present（since ca. 20 Ma）. These three stages regionally correspond to the LhasaEurasian collision during the Late Jurassic–Early Cretaceous（ca. 140–125 Ma）, the Lhasa-Gandise collision during the Late Cretaceous（ca. 80–70 Ma）, and a remote response to the India-Asian collision since ca. 55 Ma, respectively. These tectonic events also resulted in several regional unconformities between the J3/K1, K2/E, and E/N, and three large-scale hydrocarbon injection events in the Piedmont Thrust Belt（PTB）. Particularly, the hydrocarbon charge event during the Early Cretaceous resulted in the initial inundation and protection of paleo-uranium ore bodies that were formed during the Middle–Late Jurassic. The uplift and denudation of the PTB was extremely slow from 40 Ma onward due to a slight influence from the Himalayan orogeny. However, the uplift of the PTB was faster after the Miocene, which led to re-uplift and exposure at the surface during the Quaternary, resulting in its oxidation and the formation of small uranium ore bodies.展开更多
Geological mapping,interpreted cross sections,structural analyses and residual thickness maps were used to characterize the evolution of stress setting,structure and stratigraphic distribution of the Chepaizi Uplift,w...Geological mapping,interpreted cross sections,structural analyses and residual thickness maps were used to characterize the evolution of stress setting,structure and stratigraphic distribution of the Chepaizi Uplift,which is a NW-SE trending structure located in the Western Junggar Basin.The NS-trending faults show an important transpressional phase during the Late Permian,as demonstrated by tectonic stress field and stratigraphic thickness variations.A major compressional thrusting and strike-slip phase during the Late Jurassic created a series of NW-SE faults that originated by the large-scale uplift event in the Northern Tianshan.Faults were reactivated as thrust and dextral strike-slip faults.In addition,the angular unconformity observed between Jurassic and Cretaceous provide evidence of this tectonic event.Lots of normal faults indicate that the area records southward tilting and regional derived extensional stress that took place during the Neogene.Before that,thick Early Cenozoic strata are widely deposited.The balanced cross-section highlights the evolution of stress setting and stratigraphic distribution of the Chepaizi Uplift.展开更多
The development, evolution and formation mechanism of faults and their control on the migration and accumulation of Mesozoic oil and gas in the middle-shallow layers of the slope zone of Mahu sag were studied by the i...The development, evolution and formation mechanism of faults and their control on the migration and accumulation of Mesozoic oil and gas in the middle-shallow layers of the slope zone of Mahu sag were studied by the interpretation of seismic and drilling data. Two types of faults, normal and strike-slip, are developed in the middle-shallow layers of the slope zone of the Mahu sag and they are mostly active in the Yanshanian period. They are divided into four grade faults: The grade I strike-slip faults with NWW to near EW direction are related to the left-lateral transpressive fault zones in the northwest of Junggar Basin since the end of the Triassic. The grade II faults with NE to NNE direction are the normal faults located at the junction of the fault zone and the slope zone, and their formation is related to the extension at the top of the nose-like structures in the fault zone. The grade III faults, which are also the normal faults, are the result of the extension at the top of the lower uplifts in the slope zone and differential compaction. The grade IV faults with NE direction are normal faults, which may be related to the extension environment at the tip of the lower uplifts. Faults not only are the channel for the vertical migration of oil and gas, but also control the oil-gas accumulation. There are two types of oil-gas reservoirs in the middle-shallow layers of slope zone of Mahu sag: fault block reservoirs and fault-lithologic reservoirs. They have large traps and promising exploration potential.展开更多
The Chepaizi-Mosuowan paleo-uplift is a large-scale uplift stretching across the Junggar Basin formed during the Yanshanian. It has experienced four evolutionary stages: the initial forming stage (J1), the intense dev...The Chepaizi-Mosuowan paleo-uplift is a large-scale uplift stretching across the Junggar Basin formed during the Yanshanian. It has experienced four evolutionary stages: the initial forming stage (J1), the intense development stage (J2+3), the waning and burial stage (K-E), and the tilting and extinction stage (N-Q). The most intense period of activities is the Middle Jurassic. Dur-ing the Early Jurassic, the Chepaizi-Mosuowan paleo-structure was a low amplitude uplift. Because of the subsequent strong uplifting during Middle-Late Jurassic, the Middle and Upper Jurassic were eroded. With the evolution of the Chepaizi-Mosuowan paleo-uplift, the sedimentary pattern of the basin changed, and the paleo-uplift separated the northern depositional systems from those in the south side. As a result, the basin tectonics controlled the distribution and evolution of the depositional systems. During Early Jurassic, while the paleo-uplift was low, its controlling effect on depositional systems was limited and sediments coming from the northwest could reach the central and southern parts of the basin. With the strong uplifting of the Chepaizi-Mosuowan paleo-structure during Middle-Late Jurassic, sediments from the northwest provenance could only deposit in the northern graben of the paleo-uplift. The intense erosion of the Middle-Upper Jurassic also changed the former sedimentary center of the basin into a source area, supplying sediments for grabens on both sides of the paleo-uplift. In the Cretaceous, regional subsidence caused the paleo-uplift to be buried again and subsequently sediments accumulated on top of it. The depositional facies are dominated by fluvial in the Early Cretaceous and shallow lacustrine to deltaic in the Late Cretaceous. In the history of the long-lasting development of this paleo-uplift, large-scale erosions of the paleohigh not only provided sufficient sediments to the center of the Junggar Basin, but also created favorable conditions for the formation of various subtle traps such as lithologic and stratigraphic traps.展开更多
基金jointly conjugal supported by the Nuclear energy development project(grant No.H1142)Nation Pre-research Project(grant No.3210402)
文摘The Mesozoic–Cenozoic tectonic movement largely controls the northwest region of the Junggar Basin（NWJB）, which is a significant area for the exploration of petroleum and sandstone-type uranium deposits in China. This work collected six samples from this sedimentary basin and surrounding mountains to conduct apatite fission track（AFT） dating, and utilized the dating results for thermochronological modeling to reconstruct the uplift history of the NWJB and its response to hydrocarbon migration and uranium mineralization. The results indicate that a single continuous uplift event has occurred since the Early Cretaceous, showing spatiotemporal variation in the uplift and exhumation patterns throughout the NWJB. Uplift and exhumation initiated in the northwest and then proceeded to the southeast, suggesting that the fault system induced a post spread-thrust nappe into the basin during the Late Yanshanian. Modeling results indicate that the NWJB mountains have undergone three distinct stages of rapid cooling： Early Cretaceous（ca. 140–115 Ma）, Late Cretaceous（ca. 80–60 Ma）, and Miocene–present（since ca. 20 Ma）. These three stages regionally correspond to the LhasaEurasian collision during the Late Jurassic–Early Cretaceous（ca. 140–125 Ma）, the Lhasa-Gandise collision during the Late Cretaceous（ca. 80–70 Ma）, and a remote response to the India-Asian collision since ca. 55 Ma, respectively. These tectonic events also resulted in several regional unconformities between the J3/K1, K2/E, and E/N, and three large-scale hydrocarbon injection events in the Piedmont Thrust Belt（PTB）. Particularly, the hydrocarbon charge event during the Early Cretaceous resulted in the initial inundation and protection of paleo-uranium ore bodies that were formed during the Middle–Late Jurassic. The uplift and denudation of the PTB was extremely slow from 40 Ma onward due to a slight influence from the Himalayan orogeny. However, the uplift of the PTB was faster after the Miocene, which led to re-uplift and exposure at the surface during the Quaternary, resulting in its oxidation and the formation of small uranium ore bodies.
基金financially supported by the Natural Sciences Foundation of China(Chen S.,grant number 41502208)Science Foundation of China University of Petroleum(Chen S.,grant number 2462017BJB01)CNPC Innovation Foundation(Chen S.,grant number 2017D-5007-0103)
文摘Geological mapping,interpreted cross sections,structural analyses and residual thickness maps were used to characterize the evolution of stress setting,structure and stratigraphic distribution of the Chepaizi Uplift,which is a NW-SE trending structure located in the Western Junggar Basin.The NS-trending faults show an important transpressional phase during the Late Permian,as demonstrated by tectonic stress field and stratigraphic thickness variations.A major compressional thrusting and strike-slip phase during the Late Jurassic created a series of NW-SE faults that originated by the large-scale uplift event in the Northern Tianshan.Faults were reactivated as thrust and dextral strike-slip faults.In addition,the angular unconformity observed between Jurassic and Cretaceous provide evidence of this tectonic event.Lots of normal faults indicate that the area records southward tilting and regional derived extensional stress that took place during the Neogene.Before that,thick Early Cenozoic strata are widely deposited.The balanced cross-section highlights the evolution of stress setting and stratigraphic distribution of the Chepaizi Uplift.
基金Supported by the China National Science and Technology Major Project(2017ZX05008-001,2011ZX05003-003)
文摘The development, evolution and formation mechanism of faults and their control on the migration and accumulation of Mesozoic oil and gas in the middle-shallow layers of the slope zone of Mahu sag were studied by the interpretation of seismic and drilling data. Two types of faults, normal and strike-slip, are developed in the middle-shallow layers of the slope zone of the Mahu sag and they are mostly active in the Yanshanian period. They are divided into four grade faults: The grade I strike-slip faults with NWW to near EW direction are related to the left-lateral transpressive fault zones in the northwest of Junggar Basin since the end of the Triassic. The grade II faults with NE to NNE direction are the normal faults located at the junction of the fault zone and the slope zone, and their formation is related to the extension at the top of the nose-like structures in the fault zone. The grade III faults, which are also the normal faults, are the result of the extension at the top of the lower uplifts in the slope zone and differential compaction. The grade IV faults with NE direction are normal faults, which may be related to the extension environment at the tip of the lower uplifts. Faults not only are the channel for the vertical migration of oil and gas, but also control the oil-gas accumulation. There are two types of oil-gas reservoirs in the middle-shallow layers of slope zone of Mahu sag: fault block reservoirs and fault-lithologic reservoirs. They have large traps and promising exploration potential.
基金supported by National Basic Research Program of China (Grant No. 2006CB202302).
文摘The Chepaizi-Mosuowan paleo-uplift is a large-scale uplift stretching across the Junggar Basin formed during the Yanshanian. It has experienced four evolutionary stages: the initial forming stage (J1), the intense development stage (J2+3), the waning and burial stage (K-E), and the tilting and extinction stage (N-Q). The most intense period of activities is the Middle Jurassic. Dur-ing the Early Jurassic, the Chepaizi-Mosuowan paleo-structure was a low amplitude uplift. Because of the subsequent strong uplifting during Middle-Late Jurassic, the Middle and Upper Jurassic were eroded. With the evolution of the Chepaizi-Mosuowan paleo-uplift, the sedimentary pattern of the basin changed, and the paleo-uplift separated the northern depositional systems from those in the south side. As a result, the basin tectonics controlled the distribution and evolution of the depositional systems. During Early Jurassic, while the paleo-uplift was low, its controlling effect on depositional systems was limited and sediments coming from the northwest could reach the central and southern parts of the basin. With the strong uplifting of the Chepaizi-Mosuowan paleo-structure during Middle-Late Jurassic, sediments from the northwest provenance could only deposit in the northern graben of the paleo-uplift. The intense erosion of the Middle-Upper Jurassic also changed the former sedimentary center of the basin into a source area, supplying sediments for grabens on both sides of the paleo-uplift. In the Cretaceous, regional subsidence caused the paleo-uplift to be buried again and subsequently sediments accumulated on top of it. The depositional facies are dominated by fluvial in the Early Cretaceous and shallow lacustrine to deltaic in the Late Cretaceous. In the history of the long-lasting development of this paleo-uplift, large-scale erosions of the paleohigh not only provided sufficient sediments to the center of the Junggar Basin, but also created favorable conditions for the formation of various subtle traps such as lithologic and stratigraphic traps.
