Value-Based Test Case Prioritization for Regression Testing Using Genetic Algorithms

Test Case Prioritization(TCP)techniques perform better than other regression test optimization techniques including Test Suite Reduction(TSR)and Test Case Selection(TCS).Many TCP techniques are available,and their performance is usually measured through a metric Average Percentage of Fault Detection(APFD).This metric is value-neutral because it only works well when all test cases have the same cost,and all faults have the same severity.Using APFD for performance evaluation of test case orders where test cases cost or faults severity varies is prone to produce false results.Therefore,using the right metric for performance evaluation of TCP techniques is very important to get reliable and correct results.In this paper,two value-based TCP techniques have been introduced using Genetic Algorithm(GA)including Value-Cognizant Fault Detection-Based TCP(VCFDB-TCP)and Value-Cognizant Requirements Coverage-Based TCP(VCRCB-TCP).Two novel value-based performance evaluation metrics are also introduced for value-based TCP including Average Percentage of Fault Detection per value(APFDv)and Average Percentage of Requirements Coverage per value(APRCv).Two case studies are performed to validate proposed techniques and performance evaluation metrics.The proposed GA-based techniques outperformed the existing state-of-the-art TCP techniques including Original Order(OO),Reverse Order(REV-O),Random Order(RO),and Greedy algorithm.

An Optimized Test Case Minimization Technique Using Genetic Algorithm for Regression Testing

Regression testing is a widely used approach to confirm the correct functionality of the software in incremental development.The use of test cases makes it easier to test the ripple effect of changed requirements.Rigorous testingmay help in meeting the quality criteria that is based on the conformance to the requirements as given by the intended stakeholders.However,a minimized and prioritized set of test cases may reduce the efforts and time required for testingwhile focusing on the timely delivery of the software application.In this research,a technique named Test Reduce has been presented to get a minimal set of test cases based on high priority to ensure that the web applicationmeets the required quality criteria.A new technique TestReduce is proposed with a blend of genetic algorithm to find an optimized and minimal set of test cases.The ultimate objective associated with this study is to provide a technique that may solve the minimization problem of regression test cases in the case of linked requirements.In this research,the 100-Dollar prioritization approach is used to define the priority of the new requirements.

Generating of Test Data by Harmony Search Against Genetic Algorithms

Many search-based algorithms have been successfully applied in sev-eral software engineering activities.Genetic algorithms(GAs)are the most used in the scientific domains by scholars to solve software testing problems.They imi-tate the theory of natural selection and evolution.The harmony search algorithm(HSA)is one of the most recent search algorithms in the last years.It imitates the behavior of a musician tofind the best harmony.Scholars have estimated the simi-larities and the differences between genetic algorithms and the harmony search algorithm in diverse research domains.The test data generation process represents a critical task in software validation.Unfortunately,there is no work comparing the performance of genetic algorithms and the harmony search algorithm in the test data generation process.This paper studies the similarities and the differences between genetic algorithms and the harmony search algorithm based on the ability and speed offinding the required test data.The current research performs an empirical comparison of the HSA and the GAs,and then the significance of the results is estimated using the t-Test.The study investigates the efficiency of the harmony search algorithm and the genetic algorithms according to(1)the time performance,(2)the significance of the generated test data,and(3)the adequacy of the generated test data to satisfy a given testing criterion.The results showed that the harmony search algorithm is significantly faster than the genetic algo-rithms because the t-Test showed that the p-value of the time values is 0.026<α(αis the significance level=0.05 at 95%confidence level).In contrast,there is no significant difference between the two algorithms in generating the adequate test data because the t-Test showed that the p-value of thefitness values is 0.25>α.

大锻件统计学Chi-square test的研究和应用

根据大锻件生产的特点和统计学的基本理论方法,首次深入浅出地论述了大锻件的Chi-square test,即X2检验,并给出了具体应用示例。该方法可用于大锻件工艺参数的科学分析和生产验证,可用于大锻件质量分析和判断,可帮助逐步建立起大锻件的工序能力,帮助实现稳定并提升大锻件工艺和质量控制水平。

Research on Evacuation Path Planning Based on Improved Sparrow Search Algorithm

Reducing casualties and property losses through effective evacuation route planning has been a key focus for researchers in recent years.As part of this effort,an enhanced sparrow search algorithm(MSSA)was proposed.Firstly,the Golden Sine algorithm and a nonlinear weight factor optimization strategy were added in the discoverer position update stage of the SSA algorithm.Secondly,the Cauchy-Gaussian perturbation was applied to the optimal position of the SSA algorithm to improve its ability to jump out of local optima.Finally,the local search mechanism based on the mountain climbing method was incorporated into the local search stage of the SSA algorithm,improving its local search ability.To evaluate the effectiveness of the proposed algorithm,the Whale Algorithm,Gray Wolf Algorithm,Improved Gray Wolf Algorithm,Sparrow Search Algorithm,and MSSA Algorithm were employed to solve various test functions.The accuracy and convergence speed of each algorithm were then compared and analyzed.The results indicate that the MSSA algorithm has superior solving ability and stability compared to other algorithms.To further validate the enhanced algorithm’s capabilities for path planning,evacuation experiments were conducted using different maps featuring various obstacle types.Additionally,a multi-exit evacuation scenario was constructed according to the actual building environment of a teaching building.Both the sparrow search algorithm and MSSA algorithm were employed in the simulation experiment for multiexit evacuation path planning.The findings demonstrate that the MSSA algorithm outperforms the comparison algorithm,showcasing its greater advantages and higher application potential.

Large Deviations and Moderate Deviations for the Chi-Square Test in Type Ⅱ Error

We study the asymptotics tot the statistic of chi-square in type Ⅱ error. By the contraction principle, the large deviations and moderate deviations are obtained, and the rate function of moderate deviations can be calculated explicitly which is a squared function.

Use of Pearson’s Chi-Square for Testing Equality of Percentile Profiles across Multiple Populations

In large sample studies where distributions may be skewed and not readily transformed to symmetry, it may be of greater interest to compare different distributions in terms of percentiles rather than means. For example, it may be more informative to compare two or more populations with respect to their within population distributions by testing the hypothesis that their corresponding respective 10th, 50th, and 90th percentiles are equal. As a generalization of the median test, the proposed test statistic is asymptotically distributed as Chi-square with degrees of freedom dependent upon the number of percentiles tested and constraints of the null hypothesis. Results from simulation studies are used to validate the nominal 0.05 significance level under the null hypothesis, and asymptotic power properties that are suitable for testing equality of percentile profiles against selected profile discrepancies for a variety of underlying distributions. A pragmatic example is provided to illustrate the comparison of the percentile profiles for four body mass index distributions.

A Simple Chi-Square Statistic for Testing Homogeneity of Zero-Inflated Distributions

Zero-inflated distributions are common in statistical problems where there is interest in testing homogeneity of two or more independent groups. Often, the underlying distribution that has an inflated number of zero-valued observations is asymmetric, and its functional form may not be known or easily characterized. In this case, comparisons of the groups in terms of their respective percentiles may be appropriate as these estimates are nonparametric and more robust to outliers and other irregularities. The median test is often used to compare distributions with similar but asymmetric shapes but may be uninformative when there are excess zeros or dissimilar shapes. For zero-inflated distributions, it is useful to compare the distributions with respect to their proportion of zeros, coupled with the comparison of percentile profiles for the observed non-zero values. A simple chi-square test for simultaneous testing of these two components is proposed, applicable to both continuous and discrete data. Results of simulation studies are reported to summarize empirical power under several scenarios. We give recommendations for the minimum sample size which is necessary to achieve suitable test performance in specific examples.

Practical integrated navigation fault detection algorithm based on sequential hypothesis testing

In detecting system fault algorithms,the false alarm rate and undectect rate generated by residual Chi-square test can affect the stability of filters.The paper proposes a fault detection algorithm based on sequential residual Chi-square test and applies to fault detection of an integrated navigation system.The simulation result shows that the algorithm can accurately detect the fault information of global positioning system（GPS）,eliminate the influence of false alarm and missed detection on filter,and enhance fault tolerance of integrated navigation systems.

Forecasting and Evaluating the Efficiency of Test Generation Algorithms by Genetic Algorithm

To generate a test set for a given circuit (including both combinational and sequential circuits), choice of an algorithm within a number of existing test generation algorithms to apply is bound to vary from circuit to circuit. In this paper, the genetic algorithms are used to construct the models of existing test generation algorithms in making such choice more easily. Therefore, we may forecast the testability parameters of a circuit before using the real test generation algorithm. The results also can be used to evaluate the efficiency of the existing test generation algorithms. Experimental results are given to convince the readers of the truth and the usefulness of this approach.

Five modified boundary scan adaptive test generation algorithms

To study the diagnostic problem of Wire-OR （W-O） interconnect fault of PCB （Printed Circuit Board）, five modified boundary scan adaptive algorithms for interconnect test are put forward. These algorithms apply Global-diagnosis sequence algorithm to replace the equal weight algorithm of primary test, and the test time is shortened without changing the fault diagnostic capability. The descriptions of five modified adaptive test algorithms are presented, and the capability comparison between the modified algorithm and the original algorithm is made to prove the validity of these algorithms.

Automatic Test Data Generation for Java Card Applications Using Genetic Algorithm

The main objective of software testing is to have the highest likelihood of finding the most faults with a minimum amount of time and effort. Genetic Algorithm (GA) has been successfully used by researchers in software testing to automatically generate test data. In this paper, a GA is applied using branch coverage criterion to generate the least possible set of test data to test JSC applications. Results show that applying GA achieves better performance in terms of average number of test data?generations, execution time, and percentage of branch coverage.

Managing Software Testing Technical Debt Using Evolutionary Algorithms

Technical debt(TD)happens when project teams carry out technical decisions in favor of a short-term goal(s)in their projects,whether deliberately or unknowingly.TD must be properly managed to guarantee that its negative implications do not outweigh its advantages.A lot of research has been conducted to show that TD has evolved into a common problem with considerable financial burden.Test technical debt is the technical debt aspect of testing(or test debt).Test debt is a relatively new concept that has piqued the curiosity of the software industry in recent years.In this article,we assume that the organization selects the testing artifacts at the start of every sprint.Implementing the latest features in consideration of expected business value and repaying technical debt are among candidate tasks in terms of the testing process(test cases increments).To gain the maximum benefit for the organization in terms of software testing optimization,there is a need to select the artifacts(i.e.,test cases)with maximum feature coverage within the available resources.The management of testing optimization for large projects is complicated and can also be treated as a multi-objective problem that entails a trade-off between the agile software’s short-term and long-term value.In this article,we implement a multi-objective indicatorbased evolutionary algorithm(IBEA)for fixing such optimization issues.The capability of the algorithm is evidenced by adding it to a real case study of a university registration process.

New Regularization Algorithms for Solving the Deconvolution Problem in Well Test Data Interpretation

Two new regularization algorithms for solving the first-kind Volterra integral equation, which describes the pressure-rate deconvolution problem in well test data interpretation, are developed in this paper. The main features of the problem are the strong nonuniform scale of the solution and large errors (up to 15%) in the input data. In both algorithms, the solution is represented as decomposition on special basic functions, which satisfy given a priori information on solution, and this idea allow us significantly to improve the quality of approximate solution and simplify solving the minimization problem. The theoretical details of the algorithms, as well as the results of numerical experiments for proving robustness of the algorithms, are presented.

Test Case Generation from UML-Diagrams Using Genetic Algorithm

Software testing has been attracting a lot of attention for effective software development.In model driven approach,Unified Modelling Language(UML)is a conceptual modelling approach for obligations and other features of the system in a model-driven methodology.Specialized tools interpret these models into other software artifacts such as code,test data and documentation.The generation of test cases permits the appropriate test data to be determined that have the aptitude to ascertain the requirements.This paper focuses on optimizing the test data obtained from UML activity and state chart diagrams by using Basic Genetic Algorithm(BGA).For generating the test cases,both diagrams were converted into their corresponding intermediate graphical forms namely,Activity Diagram Graph(ADG)and State Chart Diagram Graph(SCDG).Then both graphs will be combined to form a single graph called,Activity State Chart Diagram Graph(ASCDG).Both graphs were then joined to create a single graph known as the Activity State Chart Diagram Graph(ASCDG).Next,the ASCDG will be optimized using BGA to generate the test data.A case study involving a withdrawal from the automated teller machine(ATM)of a bank was employed to demonstrate the approach.The approach successfully identified defects in various ATM functions such as messaging and operation.

Using Genetic Algorithm as Test Data Generator for Stored PL/SQL Program Units

PL/SQL is the most common language for ORACLE database application. It allows the developer to create stored program units (Procedures, Functions, and Packages) to improve software reusability and hide the complexity of the execution of a specific operation behind a name. Also, it acts as an interface between SQL database and DEVELOPER. Therefore, it is important to test these modules that consist of procedures and functions. In this paper, a new genetic algorithm (GA), as search technique, is used in order to find the required test data according to branch criteria to test stored PL/SQL program units. The experimental results show that this was not fully achieved, such that the test target in some branches is not reached and the coverage percentage is 98%. A problem rises when target branch is depending on data retrieved from tables;in this case, GA is not able to generate test cases for this branch.

Syphilis testing algorithms:A review

The methods and strategies used to screen for syphilis and to confirm initially reactive results can vary significantly across clinical laboratories.While the performance characteristics of these different approaches have been evaluated by multiple studies,there is not,as of yet,a single,universally recommende dalgorithm for syphilis testing.To clarify the currently available options for syphilis testing,this update will summarize the clinical challenges to diagnosis,review the specific performance characteristics of treponemal and non-treponemal tests,and finally,summarize select studies published over the past decade which have evaluated these approaches.Specifically,this review will discuss the traditional and reverse sequence syphilis screening algorithms commonly used in the United States,alongside a discussion of the European Centre for Disease Prevention and Control syphilis algorithm.Ultimately,in the United States,the decision of which algorithm to use is largely dependent on laboratory resources,the local incidence of syphilis and patient demographics.

Target-Fault-Oriented Test Generation of Sequential CircuitsUsing Genetic Algorithm

This paper deals with the target-fault-oriented test generation of sequential circuits using genetic algorithms. We adopted the concept of multiple phases and proposed four sub-procedures which consist of activation, propagation and justification phases. The paper focuses on the design of genetic operators and construction of fitness functions which are based on the structure information of circuits. Using ISCAS89 benchmarks, the experiment results of GA were given.

Study on MCM Interconnect Test Generation Based on Ant Algorithm with Mutation Operator

A novel multi-chip module(MCM) interconnect test generation scheme based on ant algorithm(AA) with mutation operator was presented.By combing the characteristics of MCM interconnect test generation,the pheromone updating rule and state transition rule of AA is designed.Using mutation operator,this scheme overcomes ordinary AA’s defects of slow convergence speed,easy to get stagnate,and low ability of full search.The international standard MCM benchmark circuit provided by the MCNC group was used to verify the approach.The results of simulation experiments,which compare to the results of standard ant algorithm,genetic algorithm(GA) and other deterministic interconnecting algorithms,show that the proposed scheme can achieve high fault coverage,compact test set and short CPU time,that it is a newer optimized method deserving research.