Successive cultivation of Chinese fir(Cunninghamia lanceolata) would markedly affect the distribution and accumulation of soil inorganic phosphorus(Pi).However,how different chronosequence phases of Chinese fir planta...Successive cultivation of Chinese fir(Cunninghamia lanceolata) would markedly affect the distribution and accumulation of soil inorganic phosphorus(Pi).However,how different chronosequence phases of Chinese fir plantations exerting influences on the quality and quantity of soil Pi fractions in aggregate-scale remain poorly understood. This study researched the dynamic changes of aggregate-related Pi fractions encompassing occluded-P(O-P), aluminum-bound P(Al-P), iron-bound P(Fe-P), and calcium-bound P(Ca-P) in topsoil(0-20 cm) from different stand aged(9-, 17-, and 26-yr) Chinese fir plantations and one nearby abandoned land(CK) in Rongshui County,Guangxi, China. In this study, soil aggregates were classified into micro-aggregates(< 0.25 mm), small macro-aggregates(1-0.25 mm), medium macroaggregates(2-1 mm), and large macro-aggregates(> 2 mm) by one wet-sieving process. As the primary aggregate fractions correlated with better soil aggregate stability, the large macro-aggregates took the highest proportion in all aggregate sizes regardless of various stand ages of Chinese fir plantations. Besides, the 17-yr plantations of Chinese fir displayed the highest stability of aggregates structure. Compared with CK, all four soil Pi fractions from three different stand ages of Chinese fir plantations generally showed increasing trends.Irrespective of chronosequence phases, Al-P was mainly carried by small macro-aggregates. O-P showed the opposite tendency to Al-P, which had the lowest content in small macro-aggregates. Fe-P and Ca-P showed an even distribution in all aggregates.The contribution rates and stocks of each Pi fraction exhibited close relevance to the content of soil aggregates. As revealed from the results, planting of Chinese fir before 17-yr was beneficial to prompt the formation of large macro-aggregates and the level of soil P. But after 17-yr, successive monoculture planting of Chinese fir would reduce the stability of soil aggregates and render the losses of soil P. The dynamics of soil total phosphorous(TP) and Pi fractions contents were highly related to the stand ages of Chinese fir plantations, but less related to the distribution of soil aggregate sizes. As the major carriers for soil P stocks, the large macro-aggregates played a vital role in the cycles and reserves of soil P.展开更多
In order to improve the leaching resistance of active ingredient-copper in ammoniacal copper quat-type D （ACQ-D） treated Chinese fir （Cunninghamia lanceolata Hook.）, microwave post-treatments were carried out. The...In order to improve the leaching resistance of active ingredient-copper in ammoniacal copper quat-type D （ACQ-D） treated Chinese fir （Cunninghamia lanceolata Hook.）, microwave post-treatments were carried out. The percentages of leached copper from ACQ-D treated Chinese fir with different microwave post-treatments were obtained after leaching tests by analyzing the copper retention in treated wood. The fixation mechanism of copper in the treated wood was determined with the help of SEM and FTIR spectra, while the valence conversion of copper after microwave post-treatments was studied by UV spectroscopy. Our experimental results show that the percentage of leached copper was reduced significantly after microwave post-treatment over time. This development was reinforced by allowing even more time for the treatment as well as with an increase in the power of microwave post-treatment. The leaching resistance of copper in wrapped samples was better than that in unwrapped samples, which is attributed to the combined effects of temperature and moisture content. Compared with air-dried samples, the valence conversion in the samples with microwave post-treatments changed slightly, which demonstrates that microwave post-treatments cannot impair the natural decay resistance of ACQ-D treated wood. SEM and FTIR spectra showed the presence of crystal particles formed by chemical reactions between copper and wood ingredients in wood cell walls and wood pits. Only a small amount of copper reacted with cellulose, while lignin and hemicellulose were the major bonding sites for copper in wood. Given the experimental results of mechanical properties, microwave post-treatments had a slight effect on the compression strength parallel to the grain and on the erystallinity of ACQ-D treated Chinese fir.展开更多
This paper studied the variation of cleavage resistance of Chinese fir wood from plantation. Six trees of 36 years old were investigated, and the cleavage resistance properties for 672 samples made of the trees were t...This paper studied the variation of cleavage resistance of Chinese fir wood from plantation. Six trees of 36 years old were investigated, and the cleavage resistance properties for 672 samples made of the trees were tested. The samples were cut from the sapwood and heartwood at different directions (south and north) and heights (1.3, 3.3, 5.3 and 7.3 m) of the trees. The result showed that: tangential cleavage resistance was higher than radial one, and cleavage resistance of sapwood was higher than that of heartwood, but there was no significant difference in cleavage resistances between sections of the north and the south of the trees. There was a little variation in cleavage resistance between the radial and tangential from butt to top log, which shows a little decrease with the height from 1.3 to 5.3 m , but a rise in the top of the trees.展开更多
The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical...The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical Properties of Wood （GB 1927 to 1943 -- 1991）, the small clear wood samples were cut and tested, which represent the south and north of trees with heights of 1.3, 3.3, 5.3 and 7.3 m. The results showed： the tensile strength parallel to grain of the north wood was higher than that of south wood. ANOVA shows that the tensile strength parallel to the grain with height is of significant difference （at 0.05 level）.展开更多
基金supported by the Guangxi Special Fund Project for Innovation Driven Development (AA 17204087-8)the Innovation Project of Guangxi Graduate Education (YCSW2020022)。
文摘Successive cultivation of Chinese fir(Cunninghamia lanceolata) would markedly affect the distribution and accumulation of soil inorganic phosphorus(Pi).However,how different chronosequence phases of Chinese fir plantations exerting influences on the quality and quantity of soil Pi fractions in aggregate-scale remain poorly understood. This study researched the dynamic changes of aggregate-related Pi fractions encompassing occluded-P(O-P), aluminum-bound P(Al-P), iron-bound P(Fe-P), and calcium-bound P(Ca-P) in topsoil(0-20 cm) from different stand aged(9-, 17-, and 26-yr) Chinese fir plantations and one nearby abandoned land(CK) in Rongshui County,Guangxi, China. In this study, soil aggregates were classified into micro-aggregates(< 0.25 mm), small macro-aggregates(1-0.25 mm), medium macroaggregates(2-1 mm), and large macro-aggregates(> 2 mm) by one wet-sieving process. As the primary aggregate fractions correlated with better soil aggregate stability, the large macro-aggregates took the highest proportion in all aggregate sizes regardless of various stand ages of Chinese fir plantations. Besides, the 17-yr plantations of Chinese fir displayed the highest stability of aggregates structure. Compared with CK, all four soil Pi fractions from three different stand ages of Chinese fir plantations generally showed increasing trends.Irrespective of chronosequence phases, Al-P was mainly carried by small macro-aggregates. O-P showed the opposite tendency to Al-P, which had the lowest content in small macro-aggregates. Fe-P and Ca-P showed an even distribution in all aggregates.The contribution rates and stocks of each Pi fraction exhibited close relevance to the content of soil aggregates. As revealed from the results, planting of Chinese fir before 17-yr was beneficial to prompt the formation of large macro-aggregates and the level of soil P. But after 17-yr, successive monoculture planting of Chinese fir would reduce the stability of soil aggregates and render the losses of soil P. The dynamics of soil total phosphorous(TP) and Pi fractions contents were highly related to the stand ages of Chinese fir plantations, but less related to the distribution of soil aggregate sizes. As the major carriers for soil P stocks, the large macro-aggregates played a vital role in the cycles and reserves of soil P.
基金the FANEDD of China (No. 200352)the Fok Ying Tong Education Foundation (No. 101028) for financial support
文摘In order to improve the leaching resistance of active ingredient-copper in ammoniacal copper quat-type D （ACQ-D） treated Chinese fir （Cunninghamia lanceolata Hook.）, microwave post-treatments were carried out. The percentages of leached copper from ACQ-D treated Chinese fir with different microwave post-treatments were obtained after leaching tests by analyzing the copper retention in treated wood. The fixation mechanism of copper in the treated wood was determined with the help of SEM and FTIR spectra, while the valence conversion of copper after microwave post-treatments was studied by UV spectroscopy. Our experimental results show that the percentage of leached copper was reduced significantly after microwave post-treatment over time. This development was reinforced by allowing even more time for the treatment as well as with an increase in the power of microwave post-treatment. The leaching resistance of copper in wrapped samples was better than that in unwrapped samples, which is attributed to the combined effects of temperature and moisture content. Compared with air-dried samples, the valence conversion in the samples with microwave post-treatments changed slightly, which demonstrates that microwave post-treatments cannot impair the natural decay resistance of ACQ-D treated wood. SEM and FTIR spectra showed the presence of crystal particles formed by chemical reactions between copper and wood ingredients in wood cell walls and wood pits. Only a small amount of copper reacted with cellulose, while lignin and hemicellulose were the major bonding sites for copper in wood. Given the experimental results of mechanical properties, microwave post-treatments had a slight effect on the compression strength parallel to the grain and on the erystallinity of ACQ-D treated Chinese fir.
文摘This paper studied the variation of cleavage resistance of Chinese fir wood from plantation. Six trees of 36 years old were investigated, and the cleavage resistance properties for 672 samples made of the trees were tested. The samples were cut from the sapwood and heartwood at different directions (south and north) and heights (1.3, 3.3, 5.3 and 7.3 m) of the trees. The result showed that: tangential cleavage resistance was higher than radial one, and cleavage resistance of sapwood was higher than that of heartwood, but there was no significant difference in cleavage resistances between sections of the north and the south of the trees. There was a little variation in cleavage resistance between the radial and tangential from butt to top log, which shows a little decrease with the height from 1.3 to 5.3 m , but a rise in the top of the trees.
基金This work was supported by State Science and Technology Infrastructure Platform Projects (2004DEA70900).
文摘The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical Properties of Wood （GB 1927 to 1943 -- 1991）, the small clear wood samples were cut and tested, which represent the south and north of trees with heights of 1.3, 3.3, 5.3 and 7.3 m. The results showed： the tensile strength parallel to grain of the north wood was higher than that of south wood. ANOVA shows that the tensile strength parallel to the grain with height is of significant difference （at 0.05 level）.
