Continuous cooling transformation of under-cooled aus- tenite for Nb-V microalloyed spring steel 60Si2CrVATHua-lin Wu, Fu-ming Wang, Chang-rong Li, Qing Yan, and Bo ZhangAbstract: The continuous cooling transformatio...Continuous cooling transformation of under-cooled aus- tenite for Nb-V microalloyed spring steel 60Si2CrVATHua-lin Wu, Fu-ming Wang, Chang-rong Li, Qing Yan, and Bo ZhangAbstract: The continuous cooling transformation curves of under-cooled austenite in Nb-V microalloyed spring steel 60Si2CrVAT were measured by using a DIL805A quench- ing deformation dilatometer. The microstructure changes of under-cooled austenite in the tested steels at different cool- ing rates were studied by the metallographic method cou- pling with the microhardness method. The effect of Nb con- tent on continuous cooling transformation of the tested steels was analyzed. The experimental results show that with the increase in Nb content, the high-temperature and medium-temperature phase transitions were promoted,展开更多
Nonlinear calculation of Hardgrove grindability index for mixed coal used in pulverized coal injectionJian Duan, Long-zhe Jin, Sheng-nan Ou, Zhao-zhong Ding, and Fei GuoAbstract: Both experiments and theory analysis ...Nonlinear calculation of Hardgrove grindability index for mixed coal used in pulverized coal injectionJian Duan, Long-zhe Jin, Sheng-nan Ou, Zhao-zhong Ding, and Fei GuoAbstract: Both experiments and theory analysis proved that the Hardgrove grindability index (HGI) of mixed coal was nonlinear with its mixture ratio, which was explained by the theory of micro-grinding-ball effect. The HGI of 5 mixed coal samples was measured in lab. Because the HGI data of different mixed coal samples change in different ranges, they could not be directly compared with each other. Though normalizing by the relative grindability ratio (RGR),展开更多
The low-temperature selective catalytic reduction (SCR) denitrification of a flue gas was carried out with Ce-MnOx/ACFN. The denitrification efficiencies were studied by modifying the activated carbon fibers (ACF)...The low-temperature selective catalytic reduction (SCR) denitrification of a flue gas was carried out with Ce-MnOx/ACFN. The denitrification efficiencies were studied by modifying the activated carbon fibers (ACF) and changing the Ce-MnOx loading capacity, Ce/Mn molar ratio and operating conditions respectively. Ce-MnOx/ACFN as a SCR denitrification catalyst has good activity at 70-110℃. The denitrification efficiency increases with rising temperature, and it improves obviously after the ACF is modified by nitric acid. With the increasing of Ce-MnOx loading capacity and Ce/Mn molar ratio, the denitrification efficiency increases firstly and then decreases; but with the increasing of NH3/NO molar ratio in the inlet flue gas, it increases firstly and then tends to be stable. When the volume fraction of vapor in the inlet flue gas is above 8% the denitrification efficiency decreases with the vapor volume fraction increasing.展开更多
Optimization algorithm based on Lab VIEW parallel operation and its application in Ni-Ti alloy wire dieless drawing Hong-gang Zhang, Yan-bin Jiang, Zhi-hao Zhang, and Jian-xin Xie Abstract: An optimization method bas...Optimization algorithm based on Lab VIEW parallel operation and its application in Ni-Ti alloy wire dieless drawing Hong-gang Zhang, Yan-bin Jiang, Zhi-hao Zhang, and Jian-xin Xie Abstract: An optimization method based on LabVIEW parallel operation was proposed to improve the com- puting speed of the traditional genetic algorithm. When applied in a multi-core computer, the optimiza- tion method can achieve multithreading concurrent operations, thereby improving the efficiency of com- putation obviously. The initial speed-path of Ni-Ti al- loy wire dieless drawing was optimized in an eight-core computer by using the optimization method. Com- pared with a method based on MATLAB program, the operation time of the optimization method is only about 1/8 as long as that of the former. Experimental results show that after adopting the optimized speed-path, the length of diameter fluctuation is about 24 mm, which is far less than that of other speed-paths such as the S-line style or linear path.展开更多
Mineral Study on forecasting strong mining-induced earthquake Tie Li, Meifeng Cai, Hongguang Ji, Shiyu Li, Xuesong He Based on field observations of the high-density digital seismograph and tidal deformation network o...Mineral Study on forecasting strong mining-induced earthquake Tie Li, Meifeng Cai, Hongguang Ji, Shiyu Li, Xuesong He Based on field observations of the high-density digital seismograph and tidal deformation network of a meso-scale seismological experimental site, the data of strong mining-induced earthquake process were analyzed by the seismological method and wavelet tool. Believable b values and ηvalues展开更多
MineralFluid-Solid Dynamic Coupling Analysis of Foundation Soil during Large Deformation by Dynamic ConsolidationQiping Wang, Nenggang Xie, Xiaolu ShiFor the fluid-solid dynamic coupling question of foundation soil by...MineralFluid-Solid Dynamic Coupling Analysis of Foundation Soil during Large Deformation by Dynamic ConsolidationQiping Wang, Nenggang Xie, Xiaolu ShiFor the fluid-solid dynamic coupling question of foundation soil by dynamic consolidation, large deformation hypothesis on the relationship of strain and displacement was adopted to make a non-展开更多
MineralMonitoring and Analysis of the Damage Height of overburden Rock Mass on the MIned-out AreaFenhua Ren, Meifeng Cai, Xingping Lai, et al.Abstract: The vertical boreholes were drilled from the surface for correlat...MineralMonitoring and Analysis of the Damage Height of overburden Rock Mass on the MIned-out AreaFenhua Ren, Meifeng Cai, Xingping Lai, et al.Abstract: The vertical boreholes were drilled from the surface for correlation detection of the damage height of overburden rock mass. The expanding height of the inner collapsed zone and the permeable frac-展开更多
Journal of Chinese Pharmaceutical Sciences(JCPS) has been published for 22 years. During this period, JCPS has progressed from a quarterly journal to monthly publication. Moreover, the qualities of manuscripts and e...Journal of Chinese Pharmaceutical Sciences(JCPS) has been published for 22 years. During this period, JCPS has progressed from a quarterly journal to monthly publication. Moreover, the qualities of manuscripts and editing are improving, and its influence and international status reaches a high level. Under "the International Influence of Chinese Science and Technology Journals Promotion Plan", the development and internationalization of JCPS will be further promoted.展开更多
新形势下,技术经济领域的研究对于推动实现我国“十四五”规划和二○三五年远景目标起着至关重要的作用。但是技术经济研究在国外的核心期刊中分布较为分散,研究文献获取不够聚焦,本文利用Web of Science数据库,筛选以技术经济为主题的...新形势下,技术经济领域的研究对于推动实现我国“十四五”规划和二○三五年远景目标起着至关重要的作用。但是技术经济研究在国外的核心期刊中分布较为分散,研究文献获取不够聚焦,本文利用Web of Science数据库,筛选以技术经济为主题的研究文章,并根据文章所发表的期刊进行了数据统计和分析,对技术经济领域国外重点核心期刊进行了提取,定位了总被引次数前1 000次的国外核心期刊、高被引论文中排名前十位的国外核心期刊、以及发表篇数排名前十位的国外核心期刊,并对高被引和发表篇数均为前十名的国外核心期刊进行了介绍,研究结果可以在一定程度上为技术经济领域研究者提供国外研究文献获取和研究成果发表方面的参考。展开更多
目的通过对2015年新疆医科大学科研人员在Web of Science核心合集来源期刊和中国科学引文数据库(CSCD)来源期刊的发文情况进行分析,深入了解我校科研方向、科研实力和科技影响力。方法利用CSCD和Web of science核心合集数据和JCR数据库...目的通过对2015年新疆医科大学科研人员在Web of Science核心合集来源期刊和中国科学引文数据库(CSCD)来源期刊的发文情况进行分析,深入了解我校科研方向、科研实力和科技影响力。方法利用CSCD和Web of science核心合集数据和JCR数据库分析新疆医科大学在2015年的总发文量、影响因子、学科类别及JCR分区、高影响因子期刊分布情况等。结果发现新疆医科大学科研人员在CSCD和Web of Science核心合集期刊论文发文量不平衡,大量论文集中在影响因子偏低的期刊杂志上,而影响因子较高的期刊上发文均偏低。结论我校作者发表在中外文核心期刊上的论文学术水平参差不齐,呈现单一趋势,科研人员应努力提高自身学术水平;同时,学校应采取相应机制,鼓励师生多撰写高水平的文章,发表在高质量的期刊上。展开更多
文摘Continuous cooling transformation of under-cooled aus- tenite for Nb-V microalloyed spring steel 60Si2CrVATHua-lin Wu, Fu-ming Wang, Chang-rong Li, Qing Yan, and Bo ZhangAbstract: The continuous cooling transformation curves of under-cooled austenite in Nb-V microalloyed spring steel 60Si2CrVAT were measured by using a DIL805A quench- ing deformation dilatometer. The microstructure changes of under-cooled austenite in the tested steels at different cool- ing rates were studied by the metallographic method cou- pling with the microhardness method. The effect of Nb con- tent on continuous cooling transformation of the tested steels was analyzed. The experimental results show that with the increase in Nb content, the high-temperature and medium-temperature phase transitions were promoted,
文摘Nonlinear calculation of Hardgrove grindability index for mixed coal used in pulverized coal injectionJian Duan, Long-zhe Jin, Sheng-nan Ou, Zhao-zhong Ding, and Fei GuoAbstract: Both experiments and theory analysis proved that the Hardgrove grindability index (HGI) of mixed coal was nonlinear with its mixture ratio, which was explained by the theory of micro-grinding-ball effect. The HGI of 5 mixed coal samples was measured in lab. Because the HGI data of different mixed coal samples change in different ranges, they could not be directly compared with each other. Though normalizing by the relative grindability ratio (RGR),
文摘The low-temperature selective catalytic reduction (SCR) denitrification of a flue gas was carried out with Ce-MnOx/ACFN. The denitrification efficiencies were studied by modifying the activated carbon fibers (ACF) and changing the Ce-MnOx loading capacity, Ce/Mn molar ratio and operating conditions respectively. Ce-MnOx/ACFN as a SCR denitrification catalyst has good activity at 70-110℃. The denitrification efficiency increases with rising temperature, and it improves obviously after the ACF is modified by nitric acid. With the increasing of Ce-MnOx loading capacity and Ce/Mn molar ratio, the denitrification efficiency increases firstly and then decreases; but with the increasing of NH3/NO molar ratio in the inlet flue gas, it increases firstly and then tends to be stable. When the volume fraction of vapor in the inlet flue gas is above 8% the denitrification efficiency decreases with the vapor volume fraction increasing.
文摘Optimization algorithm based on Lab VIEW parallel operation and its application in Ni-Ti alloy wire dieless drawing Hong-gang Zhang, Yan-bin Jiang, Zhi-hao Zhang, and Jian-xin Xie Abstract: An optimization method based on LabVIEW parallel operation was proposed to improve the com- puting speed of the traditional genetic algorithm. When applied in a multi-core computer, the optimiza- tion method can achieve multithreading concurrent operations, thereby improving the efficiency of com- putation obviously. The initial speed-path of Ni-Ti al- loy wire dieless drawing was optimized in an eight-core computer by using the optimization method. Com- pared with a method based on MATLAB program, the operation time of the optimization method is only about 1/8 as long as that of the former. Experimental results show that after adopting the optimized speed-path, the length of diameter fluctuation is about 24 mm, which is far less than that of other speed-paths such as the S-line style or linear path.
文摘Mineral Study on forecasting strong mining-induced earthquake Tie Li, Meifeng Cai, Hongguang Ji, Shiyu Li, Xuesong He Based on field observations of the high-density digital seismograph and tidal deformation network of a meso-scale seismological experimental site, the data of strong mining-induced earthquake process were analyzed by the seismological method and wavelet tool. Believable b values and ηvalues
文摘MineralFluid-Solid Dynamic Coupling Analysis of Foundation Soil during Large Deformation by Dynamic ConsolidationQiping Wang, Nenggang Xie, Xiaolu ShiFor the fluid-solid dynamic coupling question of foundation soil by dynamic consolidation, large deformation hypothesis on the relationship of strain and displacement was adopted to make a non-
文摘MineralMonitoring and Analysis of the Damage Height of overburden Rock Mass on the MIned-out AreaFenhua Ren, Meifeng Cai, Xingping Lai, et al.Abstract: The vertical boreholes were drilled from the surface for correlation detection of the damage height of overburden rock mass. The expanding height of the inner collapsed zone and the permeable frac-
文摘Journal of Chinese Pharmaceutical Sciences(JCPS) has been published for 22 years. During this period, JCPS has progressed from a quarterly journal to monthly publication. Moreover, the qualities of manuscripts and editing are improving, and its influence and international status reaches a high level. Under "the International Influence of Chinese Science and Technology Journals Promotion Plan", the development and internationalization of JCPS will be further promoted.
文摘新形势下,技术经济领域的研究对于推动实现我国“十四五”规划和二○三五年远景目标起着至关重要的作用。但是技术经济研究在国外的核心期刊中分布较为分散,研究文献获取不够聚焦,本文利用Web of Science数据库,筛选以技术经济为主题的研究文章,并根据文章所发表的期刊进行了数据统计和分析,对技术经济领域国外重点核心期刊进行了提取,定位了总被引次数前1 000次的国外核心期刊、高被引论文中排名前十位的国外核心期刊、以及发表篇数排名前十位的国外核心期刊,并对高被引和发表篇数均为前十名的国外核心期刊进行了介绍,研究结果可以在一定程度上为技术经济领域研究者提供国外研究文献获取和研究成果发表方面的参考。
文摘目的通过对2015年新疆医科大学科研人员在Web of Science核心合集来源期刊和中国科学引文数据库(CSCD)来源期刊的发文情况进行分析,深入了解我校科研方向、科研实力和科技影响力。方法利用CSCD和Web of science核心合集数据和JCR数据库分析新疆医科大学在2015年的总发文量、影响因子、学科类别及JCR分区、高影响因子期刊分布情况等。结果发现新疆医科大学科研人员在CSCD和Web of Science核心合集期刊论文发文量不平衡,大量论文集中在影响因子偏低的期刊杂志上,而影响因子较高的期刊上发文均偏低。结论我校作者发表在中外文核心期刊上的论文学术水平参差不齐,呈现单一趋势,科研人员应努力提高自身学术水平;同时,学校应采取相应机制,鼓励师生多撰写高水平的文章,发表在高质量的期刊上。