A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-bu...A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.展开更多
This study investigates the potential for enhancing the thermal performance of external walls insulation in warmer climates through the combination of phase change materials(PCMs)and bio-based materials,specifically h...This study investigates the potential for enhancing the thermal performance of external walls insulation in warmer climates through the combination of phase change materials(PCMs)and bio-based materials,specifically hemp wool and wood wool.Experimental tests using the heat flow method(HFM),and numerical simulations with ANSYS Fluent software were conducted to assess the dynamic thermal distribution and fluid-mechanical aspects of phase change materials(PCMs)within composite walls.The results demonstrate a notable reduction in peak indoor temperatures,achieving a 58%reduction with hemp wool with a close 40%reduction with wood wool when combined with PCMs.Fluid-mechanical analysis indicates that PCMs act as efficient indoor temperature regulators by storing excess heat during hot periods and releasing it later during phase transitions.Furthermore,the homogeneous distribution of the liquid fraction and natural convection during phase change contribute significantly to the improvement in heat transfer rates,resulting in a 96%reduction compared to hemp wool and wood wool without PCMs.展开更多
With the improvement of people's living standards and the strengthening of health awareness,outdoor sports and its supporting clothing have become a fashionable lifestyle.Consumers are paying more and more attenti...With the improvement of people's living standards and the strengthening of health awareness,outdoor sports and its supporting clothing have become a fashionable lifestyle.Consumers are paying more and more attention to the comfort and fashionable appearance of clothing,and this change in demand is blurring the lines of application of professional clothing and equipment,and outdoor clothing is no longer limited to specific sports scenarios.展开更多
In early April,The Woolmark Company,the authoritative wool textiles organization,presented RETURN,a sustainable art exhibition at R130,a buyer shop during Shanghai Fashion Week,where three pieces of naturally degraded...In early April,The Woolmark Company,the authoritative wool textiles organization,presented RETURN,a sustainable art exhibition at R130,a buyer shop during Shanghai Fashion Week,where three pieces of naturally degraded wool fabrics were on display for the first time in China.The exhibition visualised the biodegradation process of this natural fabric,leading people to experience the natural charm of wool through art and natural beauty.展开更多
[Objective] To get major genes for wool traits regulation from immune genes. [Methods] Microarray technology was used to detect differentially expressed immune genes between body side skin （more wool growing） and gr...[Objective] To get major genes for wool traits regulation from immune genes. [Methods] Microarray technology was used to detect differentially expressed immune genes between body side skin （more wool growing） and groin skin （no wool growing） of Aohan fine wool sheep. [Results] 46 immune genes （fold change 〉2.0） were identified and classified, and then 6 of which were selected for QPCR confir- mation. The degree of consistency of the QPCR and microarray results was 66.67%, [Conclusion] Immune privilege may participate in wool growth regulation.展开更多
Three proteases were applied to treatments of wool. The shrinkage, dyeing behavior, some physical and mechanical properties of treated wool were studied. Peroxymonosulfate(PMS)and lipase were used to pretreat wool bef...Three proteases were applied to treatments of wool. The shrinkage, dyeing behavior, some physical and mechanical properties of treated wool were studied. Peroxymonosulfate(PMS)and lipase were used to pretreat wool before the treatment of it by protease. The results show that the shrink resistance of wool fabric is not obtained when it is treated only by the protease, but it is remarkably improved when the wool fabric is treated first by PMS or a lipase afterwards by protease The rate of dyeing is increased when the wool is treated by protease or combination of oxidant/lipase and protease. Whiteness, luster and softness of treated wool are improved, while the strength and elasticity are reduced.展开更多
The clinical symptoms of a disorder which is known locally as ＂wool-eating ailment＂ in Guizhou semi-fine wool sheep in the Weining County of Guizhou Province, China, are poor weight gain, lost appetite, pica, emacia...The clinical symptoms of a disorder which is known locally as ＂wool-eating ailment＂ in Guizhou semi-fine wool sheep in the Weining County of Guizhou Province, China, are poor weight gain, lost appetite, pica, emaciation, and wool-eating. The mineral composition of forage, and samples of blood, liver and wool from Guizhou semi-fine wool sheep in affected ranches were compared with those from the unaffected areas. The mean concentration of iron in forage from affected pasture was significantly higher than that from the unaffected pasture. The mean concentration of sulfur in forage from the affected and unaffected pasture was similar and within normal ranges. The mean concentration of sulfur in blood, liver and wool from the affected Guizhou semi-fine wool sheep was significantly lower than that from the unaffected sheep while the content of iron in blood, liver and wool from the affected sheep was significantly higher than that from the unaffected sheep. Oral administration of calcium sulfate prevented and cured the disease. We concluded that the disease of Guizhou semi-fine wool sheep in the Weining County is due to S deficiency caused by the high Fe in forages.展开更多
This study describes the characteristics of mineral wool and its applications,and also introduces the traditional process of mineral wool made from molten blast furnace （BF） slag. Compared with high energy consumpti...This study describes the characteristics of mineral wool and its applications,and also introduces the traditional process of mineral wool made from molten blast furnace （BF） slag. Compared with high energy consumption of the traditional process,the production of mineral wool by using molten BF slag will be able to take full advantage of the sensible heat of molten slag, and also reduce production costs. However, there are also further issues to resolve such as how to obtain the required amount of molten BF slag and how to make it homogeneous. Based on the physical and chemical properties of the molten BF slag,the investigation into the relationship between temperature and viscosity under different acidity coefficients of the slag and silicon mixture was conducted. Combined with the crystallization and phase diagram of slag wool, its heat resistance, water resistance, durability and corrosion resistance were analyzed. Finally, trends of the technology development are proposed.展开更多
Due to the effects of samples and testing conditions on fibre-bundle tensile behaviour, it is necessary to investigate the relationships between experimental factors and tensile properties for the fibre-bundle tensile...Due to the effects of samples and testing conditions on fibre-bundle tensile behaviour, it is necessary to investigate the relationships between experimental factors and tensile properties for the fibre-bundle tensile tester (TENSOR). The effects of bundle sample preparation, fibre bundle mass and fibre alignment have been tested. The experimental results indicated that (1) the low damage in combing and no free-end fibres in the cut bundle are most important for the sample preparation; (2) the reasonable bundle mass is 400700 tex, but the tensile properties measured should be modified with the bundle mass because a small amount of bundle mass causes the scatter results, while the larger is the bundle mass, the more difficult to comb fibres parallel and to clamp fibre evenly; and (3) the fibre irregular arrangement forms a slack bundle resulting in interaction between fibres, which will affect the reproducibility and accuracy of the tensile testing.展开更多
Due to various reasons, the inspection methods often need to be changed, and the detection reagents often need to be replaced. In this study, a comparative experiment was conducted between the ethanol-based and ether-...Due to various reasons, the inspection methods often need to be changed, and the detection reagents often need to be replaced. In this study, a comparative experiment was conducted between the ethanol-based and ether-based determination methods for oil content in imported wool. The determination results obtained from the two methods were treated as abscissa and ordinate respectively,and their linear relationship was analyzed. According to the linear regression analysis, the conversion equation of determination result between the two methods was obtained. In addition, the repeatability admissible error and reproducibility admissible error were established through analyzing the comparative experimental results by scientific software. This study will bring new ideas for further researches in this field, and provide reference for solving the similar problems in actual inspection work.展开更多
Under the trend of low-carbon economy,the technique of producing mineral wool insulation material from molten blast furnace slag are of great significance both to Insulation materials industry and metallurgical indust...Under the trend of low-carbon economy,the technique of producing mineral wool insulation material from molten blast furnace slag are of great significance both to Insulation materials industry and metallurgical industry on the aspects of energy conservation and emissions reduction.This paper presents characteristics and use of mineral wool made of blast furnace slag,and also introduces mineral wool production process and key techniques.It also put forward a number of issues need to be addressed in the process.The inherent mechanism affecting the performance of the of mineral wool is analyzed.And it points out the target and future direction of R & D in Baoshan Iron and Steel in mineral wool technology field.展开更多
As a member of the Frizzled family, Frizzled3 (FZD3) is a receptor of the canonical Wnt signaling pathway and plays a vital role in mammalian hair follicle developmental processes. However, its effects on wool traits ...As a member of the Frizzled family, Frizzled3 (FZD3) is a receptor of the canonical Wnt signaling pathway and plays a vital role in mammalian hair follicle developmental processes. However, its effects on wool traits are not clear. The objectives of this study were to identify the single nucleotide polymorphisms (SNPs) and the expression patterns of FZD3 gene, and then to determine whether it affected wool traits of Chinese Merino sheep (Xinjiang Type) or not. PCR-single stranded conformational polymorphism (PCR-SSCP) and sequencing were used to identify mutation loci, and general linear model (GLM) with SAS 9.1 was used for the association analysis between wool traits and SNPs. Quantitative real-time PCR (qRT-PCR) was used to investigate FZD3 gene expression levels. The results showed that six exons of FZD3 gene were amplified and two mutation loci were identified in exon 1 (NC_019459.2: g.101771685 T>C (SNP1)) and exon 3 (NC_019459.2: g.101810848, A>C (SNP2)), respectively. Association analysis showed that SNP1 was significantly associated with mean fiber diameter (MFD)(P=0.04) and live weight (LW)(P=0.0004), SNP2 was significantly associated with greasy fleece weight (GFW)(P=0.04). The expression level of FZD3 gene in skin tissues of the superfine wool (SF) group was significantly lower (P<0.05) than that of the fine wool (F) group. Moreover, it had a higher expression level (P<0.01) in skin tissues than in other tissues of Chinese Merino ewes. While, its expression level had a fluctuant expression in skin tissues at different developmental stages of embryos and born lambs, with the highest expression levels (P<0.01) at the 65th day of embryos. Our study revealed the genetic relationship between FZD3 variants and wool traits and two identified SNPs might serve as potential and valuable genetic markers for sheep breeding and lay a molecular genetic foundation for sheep marker-assisted selection (MAS).展开更多
文摘A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.
文摘This study investigates the potential for enhancing the thermal performance of external walls insulation in warmer climates through the combination of phase change materials(PCMs)and bio-based materials,specifically hemp wool and wood wool.Experimental tests using the heat flow method(HFM),and numerical simulations with ANSYS Fluent software were conducted to assess the dynamic thermal distribution and fluid-mechanical aspects of phase change materials(PCMs)within composite walls.The results demonstrate a notable reduction in peak indoor temperatures,achieving a 58%reduction with hemp wool with a close 40%reduction with wood wool when combined with PCMs.Fluid-mechanical analysis indicates that PCMs act as efficient indoor temperature regulators by storing excess heat during hot periods and releasing it later during phase transitions.Furthermore,the homogeneous distribution of the liquid fraction and natural convection during phase change contribute significantly to the improvement in heat transfer rates,resulting in a 96%reduction compared to hemp wool and wood wool without PCMs.
文摘With the improvement of people's living standards and the strengthening of health awareness,outdoor sports and its supporting clothing have become a fashionable lifestyle.Consumers are paying more and more attention to the comfort and fashionable appearance of clothing,and this change in demand is blurring the lines of application of professional clothing and equipment,and outdoor clothing is no longer limited to specific sports scenarios.
文摘In early April,The Woolmark Company,the authoritative wool textiles organization,presented RETURN,a sustainable art exhibition at R130,a buyer shop during Shanghai Fashion Week,where three pieces of naturally degraded wool fabrics were on display for the first time in China.The exhibition visualised the biodegradation process of this natural fabric,leading people to experience the natural charm of wool through art and natural beauty.
基金Supported by Project of National Hair Sheep Industry Technology System(CARS-40)~~
文摘[Objective] To get major genes for wool traits regulation from immune genes. [Methods] Microarray technology was used to detect differentially expressed immune genes between body side skin （more wool growing） and groin skin （no wool growing） of Aohan fine wool sheep. [Results] 46 immune genes （fold change 〉2.0） were identified and classified, and then 6 of which were selected for QPCR confir- mation. The degree of consistency of the QPCR and microarray results was 66.67%, [Conclusion] Immune privilege may participate in wool growth regulation.
文摘Three proteases were applied to treatments of wool. The shrinkage, dyeing behavior, some physical and mechanical properties of treated wool were studied. Peroxymonosulfate(PMS)and lipase were used to pretreat wool before the treatment of it by protease. The results show that the shrink resistance of wool fabric is not obtained when it is treated only by the protease, but it is remarkably improved when the wool fabric is treated first by PMS or a lipase afterwards by protease The rate of dyeing is increased when the wool is treated by protease or combination of oxidant/lipase and protease. Whiteness, luster and softness of treated wool are improved, while the strength and elasticity are reduced.
基金supported financially by the National Natural Science Foundation of China (40930533/ D011004)the China Agriculture Research System (CARS-40-30)+2 种基金the Science Foundation of Bijie District Grant, China (200905)the Guizhou Provincial Key Technologies R&D Program, China (NY[2010]3041)the Guizhou Governor Foundation, China (2009129)
文摘The clinical symptoms of a disorder which is known locally as ＂wool-eating ailment＂ in Guizhou semi-fine wool sheep in the Weining County of Guizhou Province, China, are poor weight gain, lost appetite, pica, emaciation, and wool-eating. The mineral composition of forage, and samples of blood, liver and wool from Guizhou semi-fine wool sheep in affected ranches were compared with those from the unaffected areas. The mean concentration of iron in forage from affected pasture was significantly higher than that from the unaffected pasture. The mean concentration of sulfur in forage from the affected and unaffected pasture was similar and within normal ranges. The mean concentration of sulfur in blood, liver and wool from the affected Guizhou semi-fine wool sheep was significantly lower than that from the unaffected sheep while the content of iron in blood, liver and wool from the affected sheep was significantly higher than that from the unaffected sheep. Oral administration of calcium sulfate prevented and cured the disease. We concluded that the disease of Guizhou semi-fine wool sheep in the Weining County is due to S deficiency caused by the high Fe in forages.
文摘This study describes the characteristics of mineral wool and its applications,and also introduces the traditional process of mineral wool made from molten blast furnace （BF） slag. Compared with high energy consumption of the traditional process,the production of mineral wool by using molten BF slag will be able to take full advantage of the sensible heat of molten slag, and also reduce production costs. However, there are also further issues to resolve such as how to obtain the required amount of molten BF slag and how to make it homogeneous. Based on the physical and chemical properties of the molten BF slag,the investigation into the relationship between temperature and viscosity under different acidity coefficients of the slag and silicon mixture was conducted. Combined with the crystallization and phase diagram of slag wool, its heat resistance, water resistance, durability and corrosion resistance were analyzed. Finally, trends of the technology development are proposed.
文摘Due to the effects of samples and testing conditions on fibre-bundle tensile behaviour, it is necessary to investigate the relationships between experimental factors and tensile properties for the fibre-bundle tensile tester (TENSOR). The effects of bundle sample preparation, fibre bundle mass and fibre alignment have been tested. The experimental results indicated that (1) the low damage in combing and no free-end fibres in the cut bundle are most important for the sample preparation; (2) the reasonable bundle mass is 400700 tex, but the tensile properties measured should be modified with the bundle mass because a small amount of bundle mass causes the scatter results, while the larger is the bundle mass, the more difficult to comb fibres parallel and to clamp fibre evenly; and (3) the fibre irregular arrangement forms a slack bundle resulting in interaction between fibres, which will affect the reproducibility and accuracy of the tensile testing.
文摘Due to various reasons, the inspection methods often need to be changed, and the detection reagents often need to be replaced. In this study, a comparative experiment was conducted between the ethanol-based and ether-based determination methods for oil content in imported wool. The determination results obtained from the two methods were treated as abscissa and ordinate respectively,and their linear relationship was analyzed. According to the linear regression analysis, the conversion equation of determination result between the two methods was obtained. In addition, the repeatability admissible error and reproducibility admissible error were established through analyzing the comparative experimental results by scientific software. This study will bring new ideas for further researches in this field, and provide reference for solving the similar problems in actual inspection work.
文摘Under the trend of low-carbon economy,the technique of producing mineral wool insulation material from molten blast furnace slag are of great significance both to Insulation materials industry and metallurgical industry on the aspects of energy conservation and emissions reduction.This paper presents characteristics and use of mineral wool made of blast furnace slag,and also introduces mineral wool production process and key techniques.It also put forward a number of issues need to be addressed in the process.The inherent mechanism affecting the performance of the of mineral wool is analyzed.And it points out the target and future direction of R & D in Baoshan Iron and Steel in mineral wool technology field.
基金supported by the National Natural Science Foundation of China (31360543 and 31760655)the earmarked fund for the China Agriculture Research System (CARS-39)+1 种基金the Open Project of Key Laboratory of Genetics Breeding and Reproduction of Xinjiang Cashmere and Wool Sheep, China (2016D03017)the Postdoctoral Science Foundation, China (2017M623287)
文摘As a member of the Frizzled family, Frizzled3 (FZD3) is a receptor of the canonical Wnt signaling pathway and plays a vital role in mammalian hair follicle developmental processes. However, its effects on wool traits are not clear. The objectives of this study were to identify the single nucleotide polymorphisms (SNPs) and the expression patterns of FZD3 gene, and then to determine whether it affected wool traits of Chinese Merino sheep (Xinjiang Type) or not. PCR-single stranded conformational polymorphism (PCR-SSCP) and sequencing were used to identify mutation loci, and general linear model (GLM) with SAS 9.1 was used for the association analysis between wool traits and SNPs. Quantitative real-time PCR (qRT-PCR) was used to investigate FZD3 gene expression levels. The results showed that six exons of FZD3 gene were amplified and two mutation loci were identified in exon 1 (NC_019459.2: g.101771685 T>C (SNP1)) and exon 3 (NC_019459.2: g.101810848, A>C (SNP2)), respectively. Association analysis showed that SNP1 was significantly associated with mean fiber diameter (MFD)(P=0.04) and live weight (LW)(P=0.0004), SNP2 was significantly associated with greasy fleece weight (GFW)(P=0.04). The expression level of FZD3 gene in skin tissues of the superfine wool (SF) group was significantly lower (P<0.05) than that of the fine wool (F) group. Moreover, it had a higher expression level (P<0.01) in skin tissues than in other tissues of Chinese Merino ewes. While, its expression level had a fluctuant expression in skin tissues at different developmental stages of embryos and born lambs, with the highest expression levels (P<0.01) at the 65th day of embryos. Our study revealed the genetic relationship between FZD3 variants and wool traits and two identified SNPs might serve as potential and valuable genetic markers for sheep breeding and lay a molecular genetic foundation for sheep marker-assisted selection (MAS).
