Smart Colorimetric Corn Starch Films Combined with Anthocyanin-Loaded Glutenin-Carboxymethyl Chitosan Nanocomplexes for Freshness Monitoring of Chilled Pork

In this study,intelligent,pH-responsive colorimetric films were prepared by encapsulating anthocyanins in nanocomplexes prepared from glutenin and carboxymethyl chitosan.These nanocomplexes were added to a corn starch matrix and used in the freshness monitoring of chilled pork.The effects of anthocyanin-loaded nanocomplexes on the physical,structural,and functional characteristics of the films were investigated.The addition of anthocyanin-loaded nanocomplexes increased the tensile strength,elongation at break,hydrophobicity,and light transmittance of the films while decreasing their water vapor permeability.This is because new hydrogen bonds are formed between the film components,resulting in a more homogeneous and dense structure.The colorimetric film has a significant color response to pH changes.These films were used in experiments on the freshness of chilled pork,in which the pH changes with changing freshness states.The results show that the colorimetric film can monitor changes in the freshness of chilled pork in real time,where orange,pink,and green represent the fresh,secondary fresh,and putrefied states of pork,respectively.Therefore,the intelligent colorimetric film developed in this study has good application potential in the food industry.

A Glassy Carbon Electrode Modified with Cellulose Nanofibrils from Ammophila arenaria for the Sensitive Detection of L-Trytophan

L-tryptophan is an essential amino acid for human health. Nanofibrillated cellulose (NFC) from marram grass (Ammophila arenaria) extracted from plants harvested in the center of Tunisia was used for the first time for the modification of a glassy carbon electrode (GCE), for the sensitive detection of L-tryptophan (Trp). After spectroscopic and morphological characterization of the extracted NFC, the GC electrode modification was monitored through cyclic voltammetry. The NFC-modified electrode exhibited good analytical performance in detecting Trp with a wide linear range between 7.5 × 10−4 mM and 10−2 mM, a detection limit of 0.2 µM, and a high sensitivity of 140.0 µA∙mM−1. Additionally, the NFC/GCE showed a good reproducibility, good selectivity versus other amino acids, uric acid, ascorbic acid, and good applicability to the detection of Trp in urine samples.

A Comparative Assessment of the Efficacy of Carbomer Gel and Carboxymethyl Cellulose Containing Artificial Tears in Dry Eyes

The present study aimed to compare the clinical efficacy of a 0.4% carbomer gel and 1% carboxymethyl cellulose （CMC） containing artificial tears in treatment of dry eye patients. Sixty subjects with mean age of 45.89 years who had symptoms and signs of dry eye were enrolled in this prospective, investigator-masked and stratified random sampling study. The subjects were divided into two parallel groups with 30 subjects （60 eyes） in each group. One group received carbomer gel, and the other group received 1% CMC containing artificial tears. Subjects received the drops 3 to 4 times or more per day for 3 months. At the first visit time, the precorneal residence time of these two drops was measured. The efficacy was assessed by comparing the subjective symptoms （ocular dry- ness, foreign body sensation, burning sensation and pain）, and the objective test results of tears breakup time, Schirmer＇s test and corneal fluorescein staining prior to the study and after the treat- ment. As a result, the ocular residence time of carbomer gel was significantly longer than that of 1% CMC （P〈0.001）. Most of the primary subjective symptoms and objective test results were improved after treatment in both carbomer gel group and 1% CMC group. As to the improvement of each symptom and objective test result, carbomer gel was more effective than 1% CMC group （P〈0.01）. In conclusion, carbomer gel had longer precorneal residence time and was more effective than 1% CMC in the treatment of patients with dry eyes.

Flotation separation of quartz from magnesite using carboxymethyl cellulose as depressant

Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by zeta potential tests,atomic force microscopy imaging and contact angle measurements.The addition of CMC as the depressant in reverse flotation using dodecylamine(DDA)as the collector exhibited a selectively depressive performance towards magnesite and achieved an improved recovery of magnesite.The study of surface properties demonstrated that CMC and DDA exhibited different adsorption strengths on the surface of magnesite and quartz.It was found that the adsorption of CMC on magnesite surface was stronger than that of DDA,which hindered the subsequent adsorption of DDA on magnesite surface.On the contrary,the quartz surface was strongly adsorbed by DDA instead of CMC,which proved that the addition of CMC did not influence the flotation of quartz.

Preparation of urea-formaldehyde paraffin microcapsules modified by carboxymethyl cellulose as a potential phase change material

We prepared spherical microcapsules modified by carboxymethyl cellulose（CMC） with urea-formaldehyde（UF） resin as a shell material with a two-step process by in situ polymerization, and characterized the microcosmic features, chemical structure, and thermal performance of the microcapsules by SEM, FTIR, DSC, and TGA. We studied the effects of different experimental parameters of curing p H, the amounts of the emulsifier and emulsion speed. The CMC-UF microcapsules had good heat resistance and stability. The enthalpy of CMC-UF microcapsules reached 50.33 J g-1. Therefore, CMC-UF resin can be used as a potential wall material of phase change materials.

Water-Resistant and Stretchable Conductive Ionic Hydrogel Fibers Reinforced by Carboxymethyl Cellulose

Conductive ionic hydrogels(CIH)have been widely studied for the development of stretchable electronic devices,such as sensors,electrodes,and actuators.Most of these CIH are made into 3D or 2D shape,while 1D CIH(hydrogel fibers)is often difficult to make because of the low mechanical robustness of common CIH.Herein,we use gel spinning method to prepare a robust CIH fiber with high strength,large stretchability,and good conductivity.The robust CIH fiber is drawn from the composite gel of sodium polyacrylate(PAAS)and sodium carboxymethyl cellulose(CMC).In the composite CIH fiber,the soft PAAS presents good conductivity and stretchability,while the rigid CMC significantly enhances the strength and toughness of the PAAS/CMC fiber.To protect the conductive PAAS/CMC fiber from damage by water,a thin layer of hydrophobic polymethyl acrylate(PMA)or polybutyl acrylate(PBA)is coated on the PAAS/CMC fiber as a water-resistant and insulating cover.The obtained PAAS/CMC-PMA and PAAS/CMC-PBA CIH fibers present high tensile strength(up to 28 MPa),high tensile toughness(up to 43 MJ/m~3),and good electrical conductivity(up to 0.35 S/m),which are useful for textile-based stretchable electronic devices.

Synthesis and characterization of carboxymethyl cellulose/organic montmorillonite nanocomposites and its adsorption behavior for Congo Red dye

A series of carboxymethyl cellulose/organic montmorillonite （CMC/OMMT） nanocomposites with different weight ratios of carboxymethyl cellulose （CMC） to organic montmorillonite （OMMT） were synthesized under different conditions. The nanocomposites were characterized by the Fourier transform infrared （FT-IR） spectrophotometer, X-ray diffraction （XRD） method, transmission electron microscope （TEM）, scanning electron microscope （SEM）, and thermal gravimetric （TG） analysis. The results showed that the introduction of CMC may have different influences on the physico-chemical properties of OMMT and intercalated-exfoliated nanostructures were formed in the nanocomposites. The effects of different reaction conditions on the adsorption capacity of samples for Congo Red （CR） dye were investigated by controlling the amount ofhexadecyl trimethyl ammonium bromide （CTAB）, the weight ratio of CMC to OMMT, the reaction time, and the reaction temperature. Results from the adsorption experiment showed that the adsorption capacity of the nanocomposites can reach 171.37 rag/g, with the amount of CTAB being 1.0 cation exchange capacity （CEC） of MMT, the weight ratio of CMC to OMMT being l：l, the reaction time being 6 h, and the reaction temperature being 60~C. The CMC/OMMT nanocomposite can be used as a potential adsorbent to remove CR dye from an aqueous solution.

Absorption Capability Comparison of Two Kinds of Super Absorbent Resins from Carboxymethyl Cellulose

The two kinds of super absorbent resins from carboxymethyl cellulose were synthesized with the potassium persulphate and methylenebisacrylamide as initiator and cross linker respectively by radical polymerization in aqueous solution. Thestructures of the two resins were characterized with Fourier transform infrared spectroscopy FTIR, scanning electron miscroscopy （SEM）, and environment scanning electron miscroscopy （ESEM）, the results indicate that the fibriform of the carboxymethyl cellulose （CMC） is disappeared and the crusslink networks in eopolymer of carboxymethyl cellulose-graft-polyacrylic acid（CMC-g-PAA） are denser than that of eopolymer of carboxymethyl cellulose-graft-poly （acrylic acid-co-N-vinyl Pyrrolidone） （CMC-g- PAA-co-PVP）. The comparison between the two resins in absorption capacities is that CMC-g-PAA is better in the water-keep capability being heated, while CMC-g-PAA-co-PVP is better in the water absorbency and salt resistance.

Adsorption Behavior and Inhibition Corrosion Effect of Sodium Carboxymethyl Cellulose on Mild Steel in Acidic Medium

The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L-1 HCl. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol·L-1 HCl with addition of 0.04% of Na-CMC has been studied in the temperature range of 298-328 K. The associated apparent activation energy (E*a ) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.

γ⁃Fe2O3@carboxymethyl Cellulose as Potential Oral Nanomedicine for Iron Deficiency Anemia Treatment on Rats

Oral iron supplements such as ferrous iron salts are major treatment agents for iron deficiency anemia(IDA)due to the convenience of large dose administration and good patient compliance.However,the gastrointestinal adverse impact caused by Fe2+stimulus and low bioavailability severely impedes its therapeutic effects.In recent years,it has been found that nano iron⁃based nanoparticles with high surface⁃to⁃volume ratio and low iron ion leakage can alleviate the toxic effect and improve the gastrointestinal absorbance.For further clinical development,nano materials need to meet the pharmaceutical quality demand.Carboxymethyl cellulose(CMC)is a significant pharmaceutical ingredient applied in approved drug formulations,and polyglucosorbitol carboxymethylether(PSC)has been utilized in iron⁃based nanomedicine ferumoxytol synthesis,both of which can be firmly anchored on iron oxide by carboxyl chelation.In this work,iron oxide nanoparticles(NPs)modified with CMC were designed and synthesized,and the structure composition and physicochemical properties were distinctly characterized.Oral supplement effects on rat IDA were investigated and compared with other recently reported iron supplements including NPs modified with PSC.Results show that the oral nano iron supplement achieved the recovery of hemoglobin and serum iron level in only two weeks with high safety.The nano iron oxide modified with pharmaceutical excipients provides new potential approach for oral iron supplement available in clinics.

The Oleic Acid Composition Effect on the Carboxymethyl Cellulose Based Biopolymer Electrolyte

Biopolymer electrolyte based on carboxymethyl cellulose has been prepared by doping with different concentration of oleic acid via solution casting technique. Fourier Transform Infrared spectroscopy was used to study the complexation between the salt and polymer. New peak was observed at 1710, 2850, 2920 cm-1. X-ray diffraction study reveals the amorphous nature of the biopolymer electrolyte. Impedance study shows the highest ionic conductivity, σ, was found to be 2.11 × 10-5 S·cm-1 at room temperature (303 K) for sample containing 20 wt.% of oleic acid and the biopolymer electrolyte obeys Arrhenius behaviour.

Enhanced Removal of Phosphates by the Adsorbent Consisting of Iron Oxide Loaded on Porous Chitosan/Cellulose Acetate Particle

The effective and economical removal of phosphates from aqueous solution, mostly applied in waste water treatment, is one of the significant issues globally. Removal of phosphates ions in aqueous solution was analysed by chitosan blended with cellulose acetate, and iron oxide loaded chitosan-cellulose acetate adsorbents. The adsorbents were made in the form of beads. Batch experiments were performed to investigate the performance of the beads under various conditions on phosphate adsorption. Contact time, effect of initial phosphate concentration, adsorbent dosage, pH and temperature were investigated. Zeta potential measurements were also undertaken. The results showed that the adsorption process was highly pH dependent. The adsorption kinetics data were modelled with the application of adsorption reaction models and adsorption diffusion models. The results revealed that the pseudo 2nd order model was the best fitting in all cases. The experimental data were tested with Langmuir and Freundlich isotherms. The equilibrium data were well fitted to the Langmuir isotherm model with a maximum adsorption capacity of 958 μg/g. The Freundlich isotherm model also had a close fit with a maximum adsorption of 233 μg/g, which was very close to the experimental maximum adsorption. The mechanism of adsorption followed two stages in which the first one was fast followed by a slower gradual stage. SEM images showed that the adsorbent was macroporous. Fourier Transform Infrared Red (FT-IR) Spectroscopy, X-ray Diffraction Spectroscopy (XRD) and X-ray photoelectron Spectroscopy (XPS) showed that the phosphate adsorption on the HFO-CS/CA beads was due to surface complexes, and mainly involved Nitrogen atoms. HFO loading also increased surface area.

Effect of carboxymethyl cellulose on dissolution kinetics of carboxymethyl cellulose-sodium carbonate two-component tablet

Sodium carbonate and carboxymethyl cellulose powders are compressed into two-component tablets with three mass ratios,97%:3%,95%:5% and 93%:7%.The dissolution tests for two-component tablets and reference pure sodium carbonate tablets are carried out at various temperatures.The dissolution process of each tablet is measured by electrical conductivity tracking method and the concentration of dissolved sodium carbonate is quanti fied with calibrated conductivity-concentration converting equation of sodium carbonate.The quanti fied dissolution data is fitted with both surface reaction model and diffusion layer model and the results clearly show that surface reaction model is suggested as the appropriate dissolution model for all measured tablets.Therefore,it is determined that carboxymethyl cellulose is a stable element to remain the dissolution mechanism of tablet unchanged.The dissolution rate constant quanti fied with surface reaction model presents that carboxymethyl cellulose-sodium carbonate two-component tablets obtain signi ficant higher dissolution rate constant than pure sodium carbonate tablet and higher proportion of carboxymethyl cellulose leads to apparent higher dissolution rate constant.The results prove for the usage of carboxymethyl cellulose in most practical applications at a relative low-level,the effect of carboxymethyl cellulose is effective and positive for two-component tablet to enhance the dissolution process and improve dissolution rate constant and this effect is speculated coming from its dynamic physical transforming process in water including dilation and conglutination.

EFFECT OF METAL IONIC SPECIES AT MINERAL SURFACES ON THE ADSORPTION OF CARBOXYMETHYL CELLULOSE

In this research it was shown that mineral surface metal-lic sites played a decisive role in carboxymethyl cellulose (CMC) adsorp-tion, and surface hydrophobicity alone did not have significant effects. Both the carboxymethyl groups and the hydroxyl groups of the CMC par-ticipated in the interaction with mineral surface, with the carboxymethyl groups interacting with metal and metal hydroxyl species, and hydroxyl groups interacting with metal hydroxide species, respectively.

Kinetic of Adsorption of Urea Nitrogen onto Chitosan Coated Dialdehyde Cellulose under Catalysis of Immobilized Urease

The adsorption of urea nitrogen onto chitosan coated dialdehyde cellulose (CDAC) under catalysis of immobilized urease in gelatin membrane (IE) was studied in batch system. The pseudo first-order and second-order kinetic models were used to describe the kinetic data, and the rate constants were evaluated. The experimental data fitted well to the second-order kinetic model.

SYNTHESIS AND CHARACTERIZATION OF A SILICA-SUPPORTED CARBOXYMETHYLCELLULOSE PLATINUM COMPLEX AND ITS CATALYTIC BEHAVIORS FOR HYDROGENATI0N OF AR0MATICS

A silica-supported carboxymethylcellulose platinum complex (abbreviated as SiO_2-CMC-Pt) has been prepared and characterized by XPS. Its catalytic properties for hydro-genation of aromatic compounds were studied. The results showed that this catalystcould catalyze the hydrogenation of phenol, anisol, p-cresol, benzene and toluene to cyclo-hexanol, cyclohexyl methyl ether, p-methyl cyclohexanol, cyclohexane and methylcyclo-hexane, respectively in 100% yield at 30℃ and 1 atm. In the hydrogenation of phenol,COO/Pt ratio in SiO_2-CMC-Pt has much influence on the initial hydrogenation rate andthe selectivity for the intermediate product, cyclohexanone. The highest initial rate andthe highest yield of cyclohexanone both occur at COO/Pt ratio of 6. The complex is stableduring the reaction and can be used repeatedly.

Cr(VI) Removal from Aqueous Solution by Chitosan/Carboxylmethyl Cellulose/Silica Hybrid Membrane

In the present study, chitosan/carboxymethyl cellulose/silica hybrid membrane (CS/CMC/Silica) was prepared by using chitosan and carboxymethyl cellulose in the presence of 3-glycidoxypro- pyltrimethoxysilane (GPTMS) as the crosslinking agent and used to remove Cr(VI) iron in effluent. The structure of CS/CMC/Silica hybrid membrane was characterized by FT-IR spectroscopy and scanning electron microscopy (SEM). The influence of Cr(VI) concentration, solution temperature, and pH, adsorption time on adsorption performance of hybrid membrane was investigated. Adsorption capacity increased with the increase of Cr(VI) concentration and absorbing time, and decreased with the increase of sorbent dosage and temperature. The adsorption equilibrium of Cr(VI) ion was attained within 60min of contact. The pseudo-second-order model fitted the kinetic data well.

Preparation of Carboxymethyl Cellulose Fibers

Carboxymethyl cellulose(CMC) fibers were produced by extruding the CMC solution into the metal salt coagulation bath and collected with a winding machine.It was found that copper chloride,ferric chloride,cerium chloride,lanthanum chloride and aluminum nitrate solution could be used as coagulation bath to prepare CMC fibers,whereas the metal salt solutions,such as nickel chloride,zinc chloride,calcium chloride and magnesium chloride,could not.The fiber formation is due to the coordination between the carboxylates of CMC and metal ion.Fourier transform infrared spectroscopy(FTIR) was applied to studying the coordination mode of CMC and metal ion.The metal salt concentration,pH value and temperature of the coagulation bath affect the tenacity and elongation of the fiber.CMC fibers show good water uptake ability and can adsorb water more than 200% of its own weight.The mechanical behaviors of CMC fiber show dependence on environment humidity.

Characterization of Carboxymethyl Cellulose Made from Bamboo Harvesting Residues

Bamboo harvesting residues are wastes by-products of bamboo industries that contain holocellulose for about 63.14%to 70.71%,which often be discarded,incinerated or buried.In this study,carboxymethyl cellulose was prepared from bamboo harvesting residues(bamboo-branch and bamboo-tip)as raw materials.The chemical composition of bamboo harvesting residues,the viscosity and degree of substitution of carboxymethyl cellulose were determined.Carboxymethyl cellulose obtained was further characterized and compared by means of FTIR,SEM,XRD and TG.Results showed that under the optimized identical conditions,the viscosity and degree of substitution of carboxymethyl cellulose from bamboo-branch and bamboo-tip were 6.0 and 78.9 mPa·s,0.75 and 0.89,respectively.Carboxymethyl cellulose obtained from bamboo-tip displayed a lower crystallinity and a better thermal stability as compared to synthetic carboxymethyl cellulose obtained from bamboo-branch and bamboo-culm.

Multifunctional Biocompatible Fluorescent <i>Carboxymethyl Cellulose</i>Nanoparticles

A multifunctional nanoparticle based on carboxymethyl cellulose was developed. Folate group was attached to nanoparticle for specific recognition of cancerous cells and 5FU was encapsulated for delivering cytotoxicity. The whole system was able to track by the semiconductor quantum dots that were attached to the nanoparticle. The multifunctional nanoparticle was characterized by UV-VIS spectra, PL spectra, FTIR, TEM, SEM etc and was targeted to human breast cancer cell, MCF7. The biocompatibility of nanoparticle without drug and cytotoxicity rendered by nanoparticle with drug was studied with MCF7 and L929 cell lines. The epifluorescent images suggest that the folate-conjugated nanoparticles were more internalized by folate receptor positive cell line, MCF7 than the noncancerous L929 cells.