Performance of Adsorbents for NO_(2) in Furnace Flue Gas

To meet the emission standard of nitrogen oxides(NOx)in the flue gas of batch furnaces through dry adsorption,a calcium-silica inorganic adsorbent was prepared with limestone and quartz as raw materials.Sample Cu-BTC 1#was obtained by solvothermal synthesis,drying and purification in vacuum at 120℃using trimesic acid(H3BTC)and copper nitrate trihydrate(Cu(NO_(3))2·3H_(2)O)as raw materials;likewise,sample Cu-BTC 3#was obtained at 200℃.Sample Cu-BTC 2#was obtained by hydrothermal synthesis,drying and purification in air(metal-organic frameworks,1,3,5-benzene tricarboxylic acid copper).The two types of materials were tested in terms of the NO_(2) adsorption,and then the specific surface area,pore volume,NO_(2) adsorption performance,phase composition,microstructure and thermal stability of the adsorbent materials were exploredvia N_(2) physical adsorption-desorption,SEM,XRD and TG characterization.The results show that:(1)the Cu-BTC samples have higher adsorption capacity than the calcium-silica adsorbent,in which sample Cu-BTC 3#has the largest specific surface area and pore volume,thus adsorption capacity for NO_(2);(2)the calcium-silica adsorbent has better thermal stability and lower total mass loss during the entire process than the Cu-BTC samples;sample Cu-BTC 2#has the best thermal stability among the three Cu-BTC samples,and the metal Cu active sites of the Cu-BTC samples can be exposed at least above 150℃.

Deciphering the linear relationship in the activity of the oxygen reduction reaction on Pt electrodes:A decisive role of adsorbates

Despite substantial efforts in developing high-performance catalysts for the oxygen reduction reaction(ORR),the persistent challenge lies in the high onset overpotential of the ORR,and the effect of the elec-trolyte solution cannot be ignored.Consequently,we have systematically investigated the impact of adsorbate species and concentration,as well as solution pH,on the ORR activity on Pt(111)and Pt(poly)electrodes.The results all tend to establish a linear quantitative relationship between the onset potential for ORR and the adsorption equilibrium potential of the adsorbate.This finding indicates the decisive role of adsorbates in the onset potential for ORR,suggesting that the adsorption potential of adsorbates can serve as an intuitive criterion for ORR activity.Additional support for this conclusion is derived from experimental results obtained from the oxygen evolution reaction on Pt(poly)with different adsorbate species and from the hydrogen evolution reaction on Pt(111)with iodine adsorption.We further propose both an empirical equation for the onset potential for ORR and the concept of a potential-regulated adsor-bate shielding effect to elucidate the influence of adsorbates on ORR activity.This study provides new insights into the high onset overpotential of the ORR and offers potential strategies for predicting and enhancingORRactivity inthefuture.

A functionalized activated carbon adsorbent prepared from waste amidoxime resin by modifying with H_(3)PO_(4) and ZnCl_(2) and its excellent Cr(Ⅵ)adsorption

With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.

Hemostatic Effect of Chitosan-based Fiber

[Objective] The aim was to investigate the hemostatic effects of chitosan-based fibre on liver. [Method] The liver hemorrhage model of rabbit was established. Hemostasis was performed with chitosam-based fiber in experimental group, surgicel in control group and no material in blank group. The hemostatic effects were evaluated by total blood loss (TBL) and hemostatic rate. [Result] Experimental group had no bleeding in observation period, with the hemostatic rate of 100% and the blood loss of only (0.443±0.30) g/kg, better than the control group and blank group (P<0.005). [Conclusion] Chitosan-based fiber has effective hemostasis in liver wound, which will provide reliable information for the clinical trials.

Recent developments and consideration issues in solid adsorbents for CO_2 capture from flue gas

The increase in energy demand caused by industrialization leads to abundant CO_2 emissions into atmosphere and induces abrupt rise in earth temperature. It is vital to acquire relatively simple and cost-effective technologies to separate CO_2 from the flue gas and reduce its environmental impact. Solid adsorption is now considered an economic and least interfering way to capture CO_2, in that it can accomplish the goal of small energy penalty and few modifications to power plants. In this regard, we attempt to review the CO_2 adsorption performances of several types of solid adsorbents, including zeolites, clays, activated carbons, alkali metal oxides and carbonates, silica materials, metal–organic frameworks, covalent organic frameworks, and polymerized high internal phase emulsions. These solid adsorbents have been assessed in their CO_2 adsorption capacities along with other important parameters including adsorption kinetics, effect of water, recycling stability and regenerability. In particular,the superior properties of adsorbents enhanced by impregnating or grafting amine groups have been discussed for developing applicable candidates for industrial CO_2 capture.

Organobentonites as adsorbents for some organic pollutants and its application in wastewater treatment

Two organobentonites were synthesized by placing quaternary ammonium cationscetyltrimethylammonium bromide (CTMAB) and cetylpyridinium chloride (CPC) on bentonite bycation exchange. Their ability to adsorb phenol, aniline. nitrobenzene and p-nitrophenol were examined.The optimal conditions for organobentonites to remove the organic pollutants from waterwere studied. The removal rates for organobentonites to treat the organic compounds in water werefound to be over 8 times for the original mineral (untreated bentonite).The removal rates of organic pollutants and COD of wastewater were further improved by organobentonites in the presence of aluminum sulfate. The structure of organobentonites and the mechanism for their adsorption were investigated by X-ray diffraction (XRD) analysis, infrared spectra and BET surface area.

Highly Selective Lithium Ion Adsorbents:Polymeric Porous Microsphere with Crown Ether Groups

In this study, we prepared and applied polymeric porous microsphere adsorbents with selectivity for Li^+ extraction from aqueous solution. We synthesized the adsorbents by suspension polymerization using methacryloyoxyme-12-crown-4(M12C4) as a functional monomer, which had been synthesized from 2-hyroxymethyl-12-crown-4 and methacryloyl chloride. We verified the chemical composition by solid nuclear magnetic resonance(13C-NMR) spectroscopy and observed the porous structure by scanning electron microscopy(SEM). We conducted adsorption isothermal and kinetic tests to determine the adsorption properties. It was found that the adsorbents showed high adsorption efficiency and an adsorption equilibrium time of 200 min. In addition, since the crown ether used in this work could form a stable complex with Li^+, we observed good selectivity for Li^+ in the prepared solution compared with other ions such as Na^+, K^+, Mg^(2+), and Ca^(2+). We reused the adsorbents five times with no significant decrease in adsorptive capacity.

Adsorption thermodynamics and kinetic investigation of aromatic amphoteric compounds onto different polymeric adsorbents

The adsorption behavior ofp-aminobenzoic acid and o-aminobenzoic acid onto the different polymeric adsorbents was systematically investigated as a function of the solution concentration and temperature. Experimental results indicated that the equilibrium adsorption data of the four polymeric adsorbents fitted well in the Freundlich isotherm. The adsorption capacity of multi-functional polymeric adsorbent NJ-99 was the highest, which might be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of aminobenzoic acid. The adsorption capacity of o-aminobenzoic acid onto any adsorbent was higher than p-aminobenzoic acid. Thermodynamic studies suggested the exothermic, spontaneous physical adsorption process. Adsorption kinetics results showed that the adsorption followed the pseudo-second-order kinetics model and the intraparticle mass transfer process was the rate-controlling step.

Thermodynamic study of adsorption of phenolic compounds onto Amberlite XAD-4 polymeric adsorbents and its acetylized derivative MX-4

Adsorption equilibrium isotherms of phenolic compounds, phenol, p cresol, p chlorophenol and p nitrophenol, from aqueous solutions by Amberlite XAD 4 polymeric adsorbent and its acetylized derivative MX 4 within temperature range of 283 323K were obtained and fitted to the Freundlich isotherms. The capacities of equilibrium adsorption for all four phenolic compounds from their aqueous solutions increased around 20% on the acetylized resin, which may be contributed to the specific surface area and the partial polarity on the network. Estimations of the isosteric enthalpy, free energy, and entropy for the adsorption process were reported.

STUDY ON THE THERMODYNAMIC PROPERTIES OF ADSORPTION OF ETHYL BENZOATE AND DIETHYL PHTHALATE BY PHENOLIC RESIN ADSORBENTS

This paper presents experimental observations on the adsorption of individual solutes by a simple thermodynamic framework, and the equilibrium adsorption of ethyl benzoate and diethyl phthalate on phenolic resin adsorbent in hexane solutions within the temperature range of 293-313 K. The experimental results show that the Freundlich adsorption law is applicable to the adsorption of ethyl benzoate and diethyl phthalate on the adsorbent, since all the correlative factors R' are larger than 0.99. The negative values of all the isosteric adsorption enthalpies for ethyl benzoate and diethyl phthalate indicate that they undergo exothermic processes, while their magnitudes (19-28 kJ/mol) manifest a hydrogen bonding sorption process. Other thermodynamic properties: the free energy changes and the entropy change associated with the adsorption have been calculated from the Gibbs adsorption equation and the Gibbs-Helmholtz equation

ADSORPTION BEHAVIOR OF PHENOLIC COMPOUNDS ONTO POLYMERIC ADSORBENTS MODIFIED WITH 2-CARBOXYBENZOYL GROUPS

Two hypercrosslinked polymeric adsorbents （ZH-01 and Amberlite XAD-4 resin） were employed to remove three kinds of phenolic compounds including phenol, 4-nitrophenol and 2,4-dinitrophenol from aqueous solutions. The study was focused on the static equilibrium adsorption behavior, the column dynamic adsorption and desorption profiles. The Freundlich model gave a perfect fitting to the isotherm data. The adsorbing capacities for these three compounds on ZH-01 were higher than those on Amberlite XAD-4 within the temperature range 288-318 K, which was attributed to the large micropore area and 2-carboxybenzoyl functional groups on the network of ZH-01 resin. The adsorption for phenol and 4- nitrophenol on ZH-01 was a physical adsorption process, while for 2,4-dinitrophenol it was a coexistence process of physical adsorption and chemisorption＇s transitions. The column test showed the advantages of ZH-01 in the dynamic adsorption processes of phenolic compounds. Being used as the desorption reagent, sodium hydroxide solution showed an excellent performance.

Effects of the surface chemistry of macroreticular adsorbents on the adsorption of 1-naphthol/1-naphthylamine mixtures from water

The adsorption behaviors of 1-naphthol, 1-naphthylamine and l-naphthol/l-naphthylamine mixtures in water over two macroreticular adsorbents were investigated in single or binary batch systems at 293 K, 303 K and 313 K respectively. All the adsorption isotherms in the studied systems can be adequately fitted by Langmuir model. In the case of aminated macroreticular adsorbent NDA103, 1-naphthol is adsorbed to a larger extent than 1-naphthylamine; while, the opposite trend is found for nonpolar macroreticular adsorbent NDA100. It is noteworthy that at higher temperature（303 K and 313 K）, the total uptake amounts of 1-naphthol and 1-naphthylamine in all binary-component systems are obvious larger than the pure uptake amounts in single-component systems, which is presumably due to the cooperative effect primarily arisen from the hydrogen-bonding interaction between the loaded 1-naphthol and 1-naphthylamine molecules. The simultaneous adsorption systems were confirmed to be helpful to the selective adsorption towards 1-naphthol according to the larger selective index.

Binding Capacity for Aflatoxin B_1 by Different Adsorbents

In this article, in vitro adsorption of aflatoxin B1 （AFB1） onto different adsorbents was characterized and the result was verified by comparing the growth performance and serum protein levels of broilers exposed to aflatoxin-contamination feed. Main components of adsorbents selected were yeast cell extracts （Product A）, HSCAS （Product B）, and a mixture of yeast product and HSCAS （Product C）, respectively. A total of 240 broilers were assigned to eight treatments, and the effects of three types of adsorbents on growth performance and serum protein levels were evaluated. Results indicated that Product B had the highest in vitro affinity for AFB1, followed by Product C and Product A. Product B bound 97.69% of the AFB1 in solution in 10 min, and it remained over 96.03% in 60 min at pH 8.0. The B-AFB1 complex was much stronger than the other two complexes in vitro condition （P 〈 0.05）. Feed intake （FI） and average daily gain （ADG） decreased （P 〈 0.05） and feed gain ratio increased （P 〈0.05） in the treatment fed aflatoxin-contaminated feed versus treatment on the basal feed. Serum total protein （TP）, albumin （ALB）, and globulin （GLOB） levels were significantly decreased （P〈0.05）. Product B （0.15%） increased growth performance and improved serum protein levels, Product A and Product C were not as effective as Product B. Three adsorbents tested here had sufficient potential to AFBt in some extents and Product B could bind AFB1 more effectively than Product A and Product C. These results indicated that Product B could alleviate some of the AFBt toxic effect in broilers.

Carbonaceous Adsorbents Prepared from Sewage Sludge and Its Application for Hg^0 Adsorption in Simulated Flue Gas

The carbonaceous adsorbent was prepared from mixtures of dewatered sludge and sawdust with enhanced ZnCl2 chemical activation.Characteristics of the adsorbent were studied using scanning electron microscope(SEM) ,Fourier transform infrared spectroscopy(FT-IR) ,and adsorption of nitrogen.The surface analysis showed that the carbonaceous adsorbent had good specific surface and porosity(394 m 2 ·g-1of BET surface,0.12 and 0.10 ml·g-1of microporous and mesoporous volume,respectively) .The oxygen functional groups such as OH,C O and C O were found on the surface by FTIR and XPS(X-ray photoelectron spectroscopy) .The adsorption of elemental mercury(Hg0) on the carbonaceous adsorbent was studied in a fixed bed reactor.The dynamic adsorption capacity of carbonaceous adsorbent increased with influent mercury concentration,from 23.6μg·g-1at 12.58μg·m-3to 87.9μg·g-1at 72.50μg·m-3,and decreased as the adsorption temperature increased,from 246 μg·g-1 at 25°C to 61.3μg·g-1 at 140°C,when dry nitrogen was used as the carrier gas.The carbonaceous adsorbent presented higher dynamic adsorption capacity than activated carbon,which was 81.2μg·g-1and 53.8μg·g-1respectively.The adsorption data were fitted to the Langmuir adsorption model.The physical and chemical adsorption were identified on the adsorbent.

Adsorption Mechanisms of Mesoporous Adsorbents in Solutions

Sieve effect, complexation, ionic exchange, electrostatic interaction, hydrogen bonding, hydrophobic interaction, and molecular recognition based on molecular imprinting are comprehensively discussed.

The latest development on amine functionalized solid adsorbents for post-combustion CO_(2)capture:Analysis review

Global warming and associated global climate change have led to serious efforts towards reducing CO_(2)emissions through the CO_(2)capture from the major emission sources.CO_(2)capture using the amine functionalized adsorbents is regard as a direct and effective way to reducing CO_(2)emissions due to their large CO_(2)adsorption amount,excellent CO_(2)adsorption selectivity and lower energy requirements for adsorbent regeneration.Moreover,large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO_(2)capture in the past few years.In view of this,we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica,zeolite,porous carbon materials,metal organic frameworks(MOF)and other composite porous materials.In addition,amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources.Considering the importance of the stability of the adsorbent in practical applications,advanced research in the capture cycle stability has also been summarized and analyzed.Finally,we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture.

Coassembled ionic liquid/laponite hybrids as effective CO2 adsorbents

Hybrid adsorbents for COcapture were prepared by coassembling laponite（LP） nanosheets and 1-nbutyl-3-methylimidazolium chloride（BMIMCl）. The prepared BMIMCl/LP layered hybrids were systematically characterized. The interlayer distance of the BMIMCl/LP layered hybrids expanded with an increasing concentration of BMIMCl, indicating that cumulative BMIMCl was intercalated into the LP layers. The efficiency of BMIMCl toward COcapture was significantly enhanced after it was immobilized within LP layers.

A comparative study of adsorption and regeneration with different agricultural wastes as adsorbents for the removal of methylene blue from aqueous solution

Removal of dye from the industrial wastewater is one of the most important subjects in water pollution regulation.Successive adsorption/desorption cycles of a basic dye, methylene blue, on the internal almond shell, sheep manure waste and sawdust were investigated using fixed bed column experiments in order to study the adsorption capacity to remove MB and adsorbent regeneration efficiency. The adsorption breakthrough curves were predicted by the Thomas model, Yoon Nelson model, and Wolborska model and modified dose–response model using non-linear regression analysis. The results showed that the modified dose–response model was more suitable for the description of breakthrough curves for three adsorbents only in the first cycle. Although sheep manure waste presents the highest adsorption capacity, it is hard to regenerate and needs more time regeneration. Conversely, the internal almond shell presents lower adsorption capacity, but they are more readily regenerated.

Adsorbents for Expanded Bed Adsorption： Preparation and Functionalization

Expanded bed adsorption(EBA),a promising and practical separation technique,has been widely studied in the past two decades.The development of adsorbents for EBA process is a challenging course,with the special design and preparation according to the target molecules and specific expanded bed systems.Many types of supporting matrices for expanded bed adsorbents have been developed,and their preparation methods are being consummated gradually.These matrices are activated and then coupled with ligands to form functionalized adsorbents,including ion-exchange adsorbents,affinity adsorbents,mixed mode adsorbents,hydrophobic charge induction chromatography adsorbents and others.In this review,the preparation of the matrices for EBA process is summa-rized,and the coupling of ligands to the matrices to prepare functionalized adsorbents is discussed as well.

Artificial liver support molecular adsorbents recirculating system therapy as a bridge to re-transplantation in two cases of long anhepatic duration

BACKGROUND: Molecular adsorbents recirculating sys- tem (MARS) liver support therapy is the development of albumin dialysis. This study was to assess the successful ap- plication of MARS artificial liver support therapy as a bridge to re-transplantation in two cases of long anhepatic duration. METHODS: MARS therapy was given after failure plasma- exchange ( PE) treatment, which resulted in circulatory de- rangement and acute renal dysfunction in a 36-year-old male patient. Finally his uncontrolled anhepatic condition led to a successful re-transplantation. In another 48-year- old man who was diagnosed as having primary nonfunction (PNF) during the liver transplantation, 10-hour MARS treatment contributed to smooth bridging of his anhepatic phase. RESULTS: The two anhepatic patients were bridged for 26 and 17 hours respectively to re-transplantation with MARS therapy. CONCLUSION: Our experience proves that MARS artifi- cial liver can be an effective support for long time bridging PNF until re-transplantation is available.