The central-southern part of the eastern border of the Sichuan-Yunnan rhombic block provides the research strategy of ‘trade space for time' with an interesting fault system, where the segments have similar focal...The central-southern part of the eastern border of the Sichuan-Yunnan rhombic block provides the research strategy of ‘trade space for time' with an interesting fault system, where the segments have similar focal mechanisms and cover almost continuous spectra of elapse rates. We experiment to study the seismological characteristics of different segments with different elapse rates. We employed the de-clustered earthquake catalog for the calculation of b values for each segment. The analysis revealed that different segments have similar b values,which implies that, although different segments have different periods of earthquake recurrence, the 'natural time' for the whole fault system elapses with a homogeneous pace. We extended the earthquake potential score(EPS)for nowcasting earthquakes to a quasi-EPS(q EPS). It is found that q EPS increases with the increase of elapse rates,albeit for those fault segments whose elapse rates have exceeded 1, q EPS may better reflect the seismic hazard.展开更多
The Chuan-Dian Block(CDB)is located in the southeastern margin of the Tibetan Plateau,with a complex geological structure and active regional faults.The present tectonic condition with strong crustal deformation is cl...The Chuan-Dian Block(CDB)is located in the southeastern margin of the Tibetan Plateau,with a complex geological structure and active regional faults.The present tectonic condition with strong crustal deformation is closely related to the ongoing collision of the India and Eurasia plates since 65 Ma.The study of the crustal structure of this area is key to revealing the evolution and deep geodynamics of the lateral collision zone of the Tibetan Plateau.Deep seismic sounding is the most efficient method with which to unravel the velocity structure of the whole crust.Since the 1980s,19 deep seismic sounding profiles have been captured within the CDB area.In this study,we systematically integrate the research results of the 19 profiles in this area,then image the 3D crustal velocity,by sampling with a 5 km spacing and 2D/3D Kriging interpolation.The results show the following.(1)The Moho depth in the study area deepens from 30 km in the south to 66 km in the north,whereas there is no apparent variation from west to east.The Pn wave velocity is higher in stable tectonic units,such as 7.95 km/s in the Lanping-Simao block and 7.94 km/s in the western margin of the Yangtze block,than in active or mobile tectonic units,such as 7.81 km/s in the Baoshan block,7.72 km/s in the Tengchong block and 7.82 km/s in the Zhongdian block.(2)The crustal nature of the Tengchong block,the northern Lanping-Simao block and the Zhongdian block reflects a type of orogenic belt,having relatively strong tectonic activities,whereas the crustal nature of the central Lanping-Simao block and the western margin of the Yangtze block represents a type of platform.The different features of the upper-middle crust velocity,Moho depth and Pn wave velocity to both sides of the Red River fault zone and the Xianshuihe fault zone,reflect that they are clearly ultra-crustal.(3)Based on the distribution of the low velocity zones in the crust,the crustal material of the Tibetan Plateau is flowing in a NW–SE direction to the north of 26°N and to the west of 101°E,then diverting to flowing eastwards to the east of 101°E.展开更多
Harvard Centroid Moment Tensor （CMT） solutions for earthquakes from 1977 to 2004 showed that the stress fields are obviously different in northwestern Sichuan sub-block （NWSSB）, western parts of Central Yunnan sub...Harvard Centroid Moment Tensor （CMT） solutions for earthquakes from 1977 to 2004 showed that the stress fields are obviously different in northwestern Sichuan sub-block （NWSSB）, western parts of Central Yunnan sub-block （CYSB） and eastern part of CYSB. The characteristics of the mean stress fields in these three regions are obtained by fitting to CMT solutions. The stress state in NWSSB is characterized by its sub-horizontal tensile principal axis of stress （T axis） in roughly N-S direction and west dipping compressive principal axis of stress （P axis）; the one in western part of CYSB is characterized by its ENE dipping T axis and sub-horizontal medium principal axis of stress （B axis） in roughly N-S direction; the one in eastern part of CYSB is characterized by its sub-horizontal P axis in roughly NNW-SSE direction and sub-horizontal T axis in roughly WSW-ENE direction. Finite element method simulation clearly shows that the Indian Plate imposes great extrusion on Sichuan-Yunnan rhombic block （SYRB） near Assam massif. The value of the simulated compressive principal stress decreases with the distance from Assam massif. The simulated directions of the T axes in SYRB form annular distribution encir cling Assam. For a homogeneous elastic medium with free boundary conditions on the top and bottom surfaces as well as the displacement boundary conditions derived from the GPS observations on the lateral boundaries, the computation results are consistent with the Harvard CMT solutions in NWSSB and western part of CYSB, while inconsistent with the Harvard CMT solutions in eastern part of CYSB. The inconsistency in eastern part of CYSB can be reduced when it includes inhomogeneous elastic media. The stress states in NWSSB and western part of CYSB revealed by the Harvard CMT solutions are not local, which are mainly controlled by the boundary force on the whole region. On the other hand, the stress state in eastern part of CYSB given by the Harvard CMT solutions is local, which may be affected by local topography, material inhomogeneity, and the drag force underneath.展开更多
Based on the seismic station data sets from Sichuan and Yunnan provinces,we employed a multi-step seismic location method( Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 201...Based on the seismic station data sets from Sichuan and Yunnan provinces,we employed a multi-step seismic location method( Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 2010-2015 along the eastern boundaries of the Sichuan-Yunnan rhombic block,namely from southern Dawu to the Qiaojia segment.The final results show that location precision is greatly advanced and epicenter distribution exhibits good consistency with the linear distribution of the seismic faults. Earthquake distribution is quite intensive at the intersection region in the southern segment of the Xianshuihe fault,the Anninghe fault zone,the Xiaojinhe fault zone and the Daliangshan fault zone to the east. The depth profile of seismicity shows a clear stepwise activity along the active seismic fault zones. The profile crossing the faults of the Xianshuihe,Anninghe,and Daliangshan presents a complex interaction among faults near the multiple faults intersection region,Shimian,where the earthquakes are obviously divided into two groups in depth. Earthquakes are very rare at the depth of 15km-20 km,which is consistent with the region of the plastic rheology between 14km-19 km calculated by Zhu Ailan et al.,( 2005).展开更多
Based on data from an across-fault survey along the Sichuan-Yunnan rhombic block boundaries, the recent deformation characteristics on each fault have been analyzed. It was found that the rate of crustal deformation i...Based on data from an across-fault survey along the Sichuan-Yunnan rhombic block boundaries, the recent deformation characteristics on each fault have been analyzed. It was found that the rate of crustal deformation is slowing down along the northern segment and increasing along the southern segment. Each fault has different features of deformation. The horizontal deformation is mainly characterized by left-lateral strike-slip. The rate of vertical deformation is less than that of the horizontal deformation. The faults have the feature of upper wall uplifting alternated with descending. The anomaly changes of crustal deformation at some sites are closely related to the seismicities near the sites.展开更多
利用CAP（Cut and paste）方法获取了川滇块体及周边区域2007年8月至2013年4月75次3.5级以上中等地震的震源机制解,结合哈佛大学历史地震震源机制解,分析了震源机制解和震源深度的空间分布特征,并探讨了其构造动力学背景.结果表明：1）...利用CAP（Cut and paste）方法获取了川滇块体及周边区域2007年8月至2013年4月75次3.5级以上中等地震的震源机制解,结合哈佛大学历史地震震源机制解,分析了震源机制解和震源深度的空间分布特征,并探讨了其构造动力学背景.结果表明：1）川滇块体各不同断裂带、块体内部各次级块体之间、块体内外表现出不同的震源机制解空间分布特征,揭示出位于青藏高原东南缘的川滇块体及周边地区应力场的非均匀性;2）研究区各主要断裂带所反映的与构造背景作用一致的震源机制分布特征表明,川滇块体及周边近期断层破裂方式主要受到各个断裂带的构造活动以及次级块体之间相互作用的控制;3）丽江-小金河断裂带上特殊的震源机制特征和发震应力轴的分布特征,进一步证实了丽江-小金河断裂带对高原逃逸物质的抵挡和屏蔽的作用;4）震源深度分布特征表明,川滇块体及周边地震震源深度主要分布于15km的上地壳,优势分布在5～ 15km的范围,揭示出研究区的地壳脆性孕震层位于5～ 15km的上地壳.展开更多
Based on the existing materials of fault segmentation,characteristic earthquakes,and their empirical relationships,we calculated the parameters of the fault segments,such as length,width,magnitudes of characteristic e...Based on the existing materials of fault segmentation,characteristic earthquakes,and their empirical relationships,we calculated the parameters of the fault segments,such as length,width,magnitudes of characteristic earthquakes,etc.Constrained by GPS velocity field,the slip rates of these fault segments in depth were inversed using the 3-D half-space elastic dislocation model.As not all of the recurrence periods and co-seismic displacements of characteristic earthquakes are known,we selected the fault segments with these two parameters known and calculated the accumulation rate of average co-seismic displacement,which shows the faults' slip rate in seismogenic layer.Then,the slip rate in depth was compared with that in seismogenic layer,the relationship between them was obtained,and this relationship was used to get the recurrence periods and co-seismic displacements of all fault segments.After the studies above,we calculated the co-seismic deformation field of all the earthquakes larger than M s 6.8 from AD 1700 one by one and inversed the potential displacement in the co-seismic deformation field.Then,we divided the potential displacement by the slip rate from GPS inversion to get the influences of these fault segments,added the influences into the elapsed time of the characteristic earthquakes,and obtained the earthquake hazard degree of all the segments we studied in the form of the ratio of elapsed time to recurrence period;so,we name the ratio as the Impending Earthquake Risk (IER).Historical earthquake cases show that the fault segment is in safety when the IER is less than 1 but in danger after the IER becomes larger than 1.In 2009,the IER is larger than 1 on the following segments,1.35 on the Tagong segment of Xianshuihe fault,1 on the Menggu-Dongchuan segment,1.04 on the Dongchuan-Xundian segment,and 1.09 on the Yiliang-Chengjiang segment of Xiaojiang fault.展开更多
基金supported by the National Natural Science Foundation of China (NSFC, grant number U2039207)。
文摘The central-southern part of the eastern border of the Sichuan-Yunnan rhombic block provides the research strategy of ‘trade space for time' with an interesting fault system, where the segments have similar focal mechanisms and cover almost continuous spectra of elapse rates. We experiment to study the seismological characteristics of different segments with different elapse rates. We employed the de-clustered earthquake catalog for the calculation of b values for each segment. The analysis revealed that different segments have similar b values,which implies that, although different segments have different periods of earthquake recurrence, the 'natural time' for the whole fault system elapses with a homogeneous pace. We extended the earthquake potential score(EPS)for nowcasting earthquakes to a quasi-EPS(q EPS). It is found that q EPS increases with the increase of elapse rates,albeit for those fault segments whose elapse rates have exceeded 1, q EPS may better reflect the seismic hazard.
基金funded by grants from the National Key R&D Program of China(Grant No.2016YFC0600302)the National Natural Science Foundation of China(Grant Nos.41774114,42274134 and 41590863)the Chinese Geological Survey Project(Grant Nos.DD20179342 and DD20190011).
文摘The Chuan-Dian Block(CDB)is located in the southeastern margin of the Tibetan Plateau,with a complex geological structure and active regional faults.The present tectonic condition with strong crustal deformation is closely related to the ongoing collision of the India and Eurasia plates since 65 Ma.The study of the crustal structure of this area is key to revealing the evolution and deep geodynamics of the lateral collision zone of the Tibetan Plateau.Deep seismic sounding is the most efficient method with which to unravel the velocity structure of the whole crust.Since the 1980s,19 deep seismic sounding profiles have been captured within the CDB area.In this study,we systematically integrate the research results of the 19 profiles in this area,then image the 3D crustal velocity,by sampling with a 5 km spacing and 2D/3D Kriging interpolation.The results show the following.(1)The Moho depth in the study area deepens from 30 km in the south to 66 km in the north,whereas there is no apparent variation from west to east.The Pn wave velocity is higher in stable tectonic units,such as 7.95 km/s in the Lanping-Simao block and 7.94 km/s in the western margin of the Yangtze block,than in active or mobile tectonic units,such as 7.81 km/s in the Baoshan block,7.72 km/s in the Tengchong block and 7.82 km/s in the Zhongdian block.(2)The crustal nature of the Tengchong block,the northern Lanping-Simao block and the Zhongdian block reflects a type of orogenic belt,having relatively strong tectonic activities,whereas the crustal nature of the central Lanping-Simao block and the western margin of the Yangtze block represents a type of platform.The different features of the upper-middle crust velocity,Moho depth and Pn wave velocity to both sides of the Red River fault zone and the Xianshuihe fault zone,reflect that they are clearly ultra-crustal.(3)Based on the distribution of the low velocity zones in the crust,the crustal material of the Tibetan Plateau is flowing in a NW–SE direction to the north of 26°N and to the west of 101°E,then diverting to flowing eastwards to the east of 101°E.
基金Foundation item: State Key Basic research and Development Project from Ministry of Science and Technology of China (2004cb418406)National Natural Science Foundation of China (40521002).
文摘Harvard Centroid Moment Tensor （CMT） solutions for earthquakes from 1977 to 2004 showed that the stress fields are obviously different in northwestern Sichuan sub-block （NWSSB）, western parts of Central Yunnan sub-block （CYSB） and eastern part of CYSB. The characteristics of the mean stress fields in these three regions are obtained by fitting to CMT solutions. The stress state in NWSSB is characterized by its sub-horizontal tensile principal axis of stress （T axis） in roughly N-S direction and west dipping compressive principal axis of stress （P axis）; the one in western part of CYSB is characterized by its ENE dipping T axis and sub-horizontal medium principal axis of stress （B axis） in roughly N-S direction; the one in eastern part of CYSB is characterized by its sub-horizontal P axis in roughly NNW-SSE direction and sub-horizontal T axis in roughly WSW-ENE direction. Finite element method simulation clearly shows that the Indian Plate imposes great extrusion on Sichuan-Yunnan rhombic block （SYRB） near Assam massif. The value of the simulated compressive principal stress decreases with the distance from Assam massif. The simulated directions of the T axes in SYRB form annular distribution encir cling Assam. For a homogeneous elastic medium with free boundary conditions on the top and bottom surfaces as well as the displacement boundary conditions derived from the GPS observations on the lateral boundaries, the computation results are consistent with the Harvard CMT solutions in NWSSB and western part of CYSB, while inconsistent with the Harvard CMT solutions in eastern part of CYSB. The inconsistency in eastern part of CYSB can be reduced when it includes inhomogeneous elastic media. The stress states in NWSSB and western part of CYSB revealed by the Harvard CMT solutions are not local, which are mainly controlled by the boundary force on the whole region. On the other hand, the stress state in eastern part of CYSB given by the Harvard CMT solutions is local, which may be affected by local topography, material inhomogeneity, and the drag force underneath.
基金funded by Study on the Optimal Time Window of Single Azimuth Angle,the Three-in-one Project of Earthquake Monitoring,Prediction and Scientific Research of China Earthquake Administration(CEA-JC/3JH-162305)the Special Training Project for Youth Talents for Seismic Network,China Earthquake Administration(20150422)
文摘Based on the seismic station data sets from Sichuan and Yunnan provinces,we employed a multi-step seismic location method( Hypo2000 + Velest + HypoDD) to precisely locate the 7,787 earthquakes that occurred during 2010-2015 along the eastern boundaries of the Sichuan-Yunnan rhombic block,namely from southern Dawu to the Qiaojia segment.The final results show that location precision is greatly advanced and epicenter distribution exhibits good consistency with the linear distribution of the seismic faults. Earthquake distribution is quite intensive at the intersection region in the southern segment of the Xianshuihe fault,the Anninghe fault zone,the Xiaojinhe fault zone and the Daliangshan fault zone to the east. The depth profile of seismicity shows a clear stepwise activity along the active seismic fault zones. The profile crossing the faults of the Xianshuihe,Anninghe,and Daliangshan presents a complex interaction among faults near the multiple faults intersection region,Shimian,where the earthquakes are obviously divided into two groups in depth. Earthquakes are very rare at the depth of 15km-20 km,which is consistent with the region of the plastic rheology between 14km-19 km calculated by Zhu Ailan et al.,( 2005).
文摘Based on data from an across-fault survey along the Sichuan-Yunnan rhombic block boundaries, the recent deformation characteristics on each fault have been analyzed. It was found that the rate of crustal deformation is slowing down along the northern segment and increasing along the southern segment. Each fault has different features of deformation. The horizontal deformation is mainly characterized by left-lateral strike-slip. The rate of vertical deformation is less than that of the horizontal deformation. The faults have the feature of upper wall uplifting alternated with descending. The anomaly changes of crustal deformation at some sites are closely related to the seismicities near the sites.
文摘利用CAP（Cut and paste）方法获取了川滇块体及周边区域2007年8月至2013年4月75次3.5级以上中等地震的震源机制解,结合哈佛大学历史地震震源机制解,分析了震源机制解和震源深度的空间分布特征,并探讨了其构造动力学背景.结果表明：1）川滇块体各不同断裂带、块体内部各次级块体之间、块体内外表现出不同的震源机制解空间分布特征,揭示出位于青藏高原东南缘的川滇块体及周边地区应力场的非均匀性;2）研究区各主要断裂带所反映的与构造背景作用一致的震源机制分布特征表明,川滇块体及周边近期断层破裂方式主要受到各个断裂带的构造活动以及次级块体之间相互作用的控制;3）丽江-小金河断裂带上特殊的震源机制特征和发震应力轴的分布特征,进一步证实了丽江-小金河断裂带对高原逃逸物质的抵挡和屏蔽的作用;4）震源深度分布特征表明,川滇块体及周边地震震源深度主要分布于15km的上地壳,优势分布在5～ 15km的范围,揭示出研究区的地壳脆性孕震层位于5～ 15km的上地壳.
基金supported by the National Basic Research Program of China (Grant No. 2008CB425704)the Open Foundation of State Key Laboratory of Earthquake Dynamics (Grant No. LED2009B02)
文摘Based on the existing materials of fault segmentation,characteristic earthquakes,and their empirical relationships,we calculated the parameters of the fault segments,such as length,width,magnitudes of characteristic earthquakes,etc.Constrained by GPS velocity field,the slip rates of these fault segments in depth were inversed using the 3-D half-space elastic dislocation model.As not all of the recurrence periods and co-seismic displacements of characteristic earthquakes are known,we selected the fault segments with these two parameters known and calculated the accumulation rate of average co-seismic displacement,which shows the faults' slip rate in seismogenic layer.Then,the slip rate in depth was compared with that in seismogenic layer,the relationship between them was obtained,and this relationship was used to get the recurrence periods and co-seismic displacements of all fault segments.After the studies above,we calculated the co-seismic deformation field of all the earthquakes larger than M s 6.8 from AD 1700 one by one and inversed the potential displacement in the co-seismic deformation field.Then,we divided the potential displacement by the slip rate from GPS inversion to get the influences of these fault segments,added the influences into the elapsed time of the characteristic earthquakes,and obtained the earthquake hazard degree of all the segments we studied in the form of the ratio of elapsed time to recurrence period;so,we name the ratio as the Impending Earthquake Risk (IER).Historical earthquake cases show that the fault segment is in safety when the IER is less than 1 but in danger after the IER becomes larger than 1.In 2009,the IER is larger than 1 on the following segments,1.35 on the Tagong segment of Xianshuihe fault,1 on the Menggu-Dongchuan segment,1.04 on the Dongchuan-Xundian segment,and 1.09 on the Yiliang-Chengjiang segment of Xiaojiang fault.
