Bonding properties of interface in Fe/Al clad tube prepared by explosive welding

A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes possessing good bonding interface have higher shear strength than that of pure aluminum and can bear both axial and radial deformation.The original interface between aluminum layer and ferrite layer was observed by scanning electron microscopy（SEM）.The results show that the clad tubes with good bonding properties possess the interface in wave and straight shape.The Fe/Al clad tube was used to manufacture the T-shape by hydro-bulging.It is found that the good-bonding interface of the Fe/Al clad tube plays a dominant role in the formation of the T-shape.

Study on frictional behavior of SiC_(f)/SiC composite clad tube clamping condition under nuclear irradiation

Silicon carbide fiber reinforced silicon carbide matrix(SiC_(f)/SiC)composite is the key cladding material of nuclear fuel,which determines the safety and reliability of nuclear fuel storage and transportation.The replacement of its storage and transportation scenario needs to be completed by the manipulator,but the application of SiC_(f)/SiC wear,fracture,and nuclear leakage in the snatching process of brittle-flexible-rigid contact in the irradiation environment has been seriously restricted due to unclear understanding of the damage mechanism.Therefore,the effects of irradiation dose and clamping load on the friction characteristics of the contact interface between SiC_(f)/SiC clad tube are studied in this paper,and the effects of irradiation parameters and clamping force on the static friction coefficient of the contact interface between the clad tube and flexible nitrile are obtained.Based on the Greenwood-Williamson tribological model,a numerical model of the shape and structure of the contact micro-convex at the micro-scale of the clamping interface is constructed by introducing the multi-surface integral,and finally verified by experiments.The research results show that there is a unique“Irradiation suppression zone”under the clamping condition of SiC_(f)/SiC cladding tube under the nuclear irradiation environment,and the growth of static friction coefficient slows down until stagnates after irradiation reaches a certain extent(600 kGy),and there will be a decline when the irradiation dose continues to increase,among which the clamping force of 15.2 N within the irradiation interval of 1,000 kGy can meet the safety of nuclear environment operation.The results of this paper can provide an important theoretical basis and application guidance for the safe operation of SiC_(f)/SiC cladding tubes in the storage and transportation clamping process.