BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatmen...BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatment plan for a patient initially treated with four-premolar-extraction camouflage, despite indications for orthognathic surgery.CASE SUMMARY A 23-year-old male sought treatment complaining about his unsatisfactory facial appearance. His maxillary first premolars and mandibular second premolars had been extracted, and a fixed appliance had been used to retract his anterior teeth for two years without improvement. He had a convex profile, a gummy smile, lip incompetence, inadequate maxillary incisor inclination, and almost a class I molar relationship. Cephalometric analysis showed severe skeletal class Ⅱ malocclusion(A point-nasion-B point = 11.5°) with a retrognathic mandible(sella-nasion-B point = 75.9°), a protruded maxilla(sella-nasion-A point = 87.4°), and vertical maxillary excess(upper incisor to palatal plane = 33.2 mm). The excessive lingual inclination of the maxillary incisors(upper incisor to nasion-A point line =-5.5°)was due to previous treatment attempts to compensate for the skeletal class Ⅱ malocclusion. The patient was successfully retreated with decompensating orthodontic treatment combined with orthognathic surgery. The maxillary incisors were repositioned and proclined in the alveolar bone, the overjet was increased, and a space was created for orthognathic surgery, including maxillary impaction, anterior maxillary back-setting, and bilateral sagittal split ramus osteotomy to correct his skeletal anteroposterior discrepancy. Gingival display was reduced, and lip competence was restored. In addition, the results remained stable after 2 years. The patient was satisfied with his new profile as well as with the functional malocclusion at the end of treatment.CONCLUSION This case report provides orthodontists a good example of how to treat an adult with severe skeletal class Ⅱ malocclusion with vertical maxillary excess after an unsatisfactory orthodontic camouflage treatment. Orthodontic and orthognathic treatment can significantly correct a patient’s facial appearance.展开更多
Aim To determine cephalometrically the mechanism of the treatment effects of non-extraction and multiloop edgewise archwire （MEAW） technique on postpeak Class Ⅱ Division 1 patients. Methodology In this retrospectiv...Aim To determine cephalometrically the mechanism of the treatment effects of non-extraction and multiloop edgewise archwire （MEAW） technique on postpeak Class Ⅱ Division 1 patients. Methodology In this retrospective study, 16 postpeak Class Ⅱ Division 1 patients successfully corrected using a non-extraction and MEAW technique were cephalometrically evaluated and compared with 16 matched control subjects treated using an extraction technique. Using CorelDRAW software, standardized digital cephalograms preand post-active treatments were traced and a reference grid was set up. The superimpositions were based on the cranial base, the mandibular and the maxilla regions,and skeletal and dental changes were measured. Changes following treatment were evaluated using the paired-sample t-test. Student＇s t-test for unpaired samples was used to assess the differences in changes between the MEAW and the extraction control groups. Results The correction of the molar relationships comprised 54% skeletal change （mainly the advancement of the mandible） and 46% dental change. Correction of the anterior teeth relationships comprised 30% skeletal change and 70% dental change. Conclusion The MEAW technique can produce the desired vertical and sagittal movement of the tooth segment and then effectively stimulate mandibular advancement by utilizing the residual growth potential of the condyle.展开更多
Background Many cases of ClassⅡdeformities have been reported to be treated with prefabricated appliances.The aim of this study was to distinguish the clinical effect of traditional custom-made appliances and prefabr...Background Many cases of ClassⅡdeformities have been reported to be treated with prefabricated appliances.The aim of this study was to distinguish the clinical effect of traditional custom-made appliances and prefabricated appliances in the treatment of ClassⅡdivision 1 malocclusion.Therefore,soft and hard tissue changes following treatment of ClassⅡdivision 1 malocclusion using the twin-block(TB)appliance was compared to that using the Myofunctional Research Company(MRC)appliance(K1+K2)combined with oral myofunctional treatment(OMT)(MRC+OMT).Methods The study included 22 children(6 boys and 16 girls aged 9–11 years)with ClassⅡdivision 1 malocclusion along with mandibular retrognathism with a 5–12 mm overjet,basic normal maxillary status,and stage 2 or 3 cervical vertebral maturation(CVM).Participants were randomly assigned into two groups,the TB group and the MRC+OMT group for 12 months.Standardized lateral cephalograms were used to assess skeletal,dental,and soft tissue changes from pre-to post-treatment.Independent t-tests were used to compare the initial and final cephalometric status and tissue changes between the groups.Results The TB and MRC+OMT groups resulted in different degrees of lateral changes;however,improvements of skeletal and soft tissue indices were significantly greater in the TB group than in the MRC+OMT group.Conclusion TB was more effective than MRC+OMT in treating children aged 9–11 years with ClassⅡdivision 1 malocclusion.However,further research using custom-made appliances with OMT is recommended,and further investigations are needed to confirm these findings.展开更多
Objective: To evaluate the effects of the Chinese Ni-Ti coil-springs appliance on distalization of maxillary molars and the reciprocal effects on the anchorage teeth. Methods:Twenty-four adolescent patients(12 boys,12...Objective: To evaluate the effects of the Chinese Ni-Ti coil-springs appliance on distalization of maxillary molars and the reciprocal effects on the anchorage teeth. Methods:Twenty-four adolescent patients(12 boys,12 girls) with Class Ⅱ malocclusion were selected and the coil-springs appliance was used during the treatment. Pre- and postdistalization lateral cephalometric radiographs were analyzed and compared. Results: The average time for the correction of Class Ⅱ molar relationship was 4.6 months. And the mean distance of molar distalization was 4.4 mm. The Chinese Ni-Ti coil-springs also demostrated less tipping and better bodily movement of maxillary molars. Conclusion: This study suggests that the Chinese Ni-Ti coil-springs appliance distalizes the upper molar significantly, while there is no remarkable loss of anchorage because of patients’ wearing headgear with J hooks at night and Class Ⅱ elastics in the day time.展开更多
文摘BACKGROUND Patient satisfaction with facial appearance at the end of orthodontic camouflage treatment is very important, especially for skeletal malocclusion. This case report highlights the importance of the treatment plan for a patient initially treated with four-premolar-extraction camouflage, despite indications for orthognathic surgery.CASE SUMMARY A 23-year-old male sought treatment complaining about his unsatisfactory facial appearance. His maxillary first premolars and mandibular second premolars had been extracted, and a fixed appliance had been used to retract his anterior teeth for two years without improvement. He had a convex profile, a gummy smile, lip incompetence, inadequate maxillary incisor inclination, and almost a class I molar relationship. Cephalometric analysis showed severe skeletal class Ⅱ malocclusion(A point-nasion-B point = 11.5°) with a retrognathic mandible(sella-nasion-B point = 75.9°), a protruded maxilla(sella-nasion-A point = 87.4°), and vertical maxillary excess(upper incisor to palatal plane = 33.2 mm). The excessive lingual inclination of the maxillary incisors(upper incisor to nasion-A point line =-5.5°)was due to previous treatment attempts to compensate for the skeletal class Ⅱ malocclusion. The patient was successfully retreated with decompensating orthodontic treatment combined with orthognathic surgery. The maxillary incisors were repositioned and proclined in the alveolar bone, the overjet was increased, and a space was created for orthognathic surgery, including maxillary impaction, anterior maxillary back-setting, and bilateral sagittal split ramus osteotomy to correct his skeletal anteroposterior discrepancy. Gingival display was reduced, and lip competence was restored. In addition, the results remained stable after 2 years. The patient was satisfied with his new profile as well as with the functional malocclusion at the end of treatment.CONCLUSION This case report provides orthodontists a good example of how to treat an adult with severe skeletal class Ⅱ malocclusion with vertical maxillary excess after an unsatisfactory orthodontic camouflage treatment. Orthodontic and orthognathic treatment can significantly correct a patient’s facial appearance.
文摘Aim To determine cephalometrically the mechanism of the treatment effects of non-extraction and multiloop edgewise archwire （MEAW） technique on postpeak Class Ⅱ Division 1 patients. Methodology In this retrospective study, 16 postpeak Class Ⅱ Division 1 patients successfully corrected using a non-extraction and MEAW technique were cephalometrically evaluated and compared with 16 matched control subjects treated using an extraction technique. Using CorelDRAW software, standardized digital cephalograms preand post-active treatments were traced and a reference grid was set up. The superimpositions were based on the cranial base, the mandibular and the maxilla regions,and skeletal and dental changes were measured. Changes following treatment were evaluated using the paired-sample t-test. Student＇s t-test for unpaired samples was used to assess the differences in changes between the MEAW and the extraction control groups. Results The correction of the molar relationships comprised 54% skeletal change （mainly the advancement of the mandible） and 46% dental change. Correction of the anterior teeth relationships comprised 30% skeletal change and 70% dental change. Conclusion The MEAW technique can produce the desired vertical and sagittal movement of the tooth segment and then effectively stimulate mandibular advancement by utilizing the residual growth potential of the condyle.
文摘Background Many cases of ClassⅡdeformities have been reported to be treated with prefabricated appliances.The aim of this study was to distinguish the clinical effect of traditional custom-made appliances and prefabricated appliances in the treatment of ClassⅡdivision 1 malocclusion.Therefore,soft and hard tissue changes following treatment of ClassⅡdivision 1 malocclusion using the twin-block(TB)appliance was compared to that using the Myofunctional Research Company(MRC)appliance(K1+K2)combined with oral myofunctional treatment(OMT)(MRC+OMT).Methods The study included 22 children(6 boys and 16 girls aged 9–11 years)with ClassⅡdivision 1 malocclusion along with mandibular retrognathism with a 5–12 mm overjet,basic normal maxillary status,and stage 2 or 3 cervical vertebral maturation(CVM).Participants were randomly assigned into two groups,the TB group and the MRC+OMT group for 12 months.Standardized lateral cephalograms were used to assess skeletal,dental,and soft tissue changes from pre-to post-treatment.Independent t-tests were used to compare the initial and final cephalometric status and tissue changes between the groups.Results The TB and MRC+OMT groups resulted in different degrees of lateral changes;however,improvements of skeletal and soft tissue indices were significantly greater in the TB group than in the MRC+OMT group.Conclusion TB was more effective than MRC+OMT in treating children aged 9–11 years with ClassⅡdivision 1 malocclusion.However,further research using custom-made appliances with OMT is recommended,and further investigations are needed to confirm these findings.
文摘Objective: To evaluate the effects of the Chinese Ni-Ti coil-springs appliance on distalization of maxillary molars and the reciprocal effects on the anchorage teeth. Methods:Twenty-four adolescent patients(12 boys,12 girls) with Class Ⅱ malocclusion were selected and the coil-springs appliance was used during the treatment. Pre- and postdistalization lateral cephalometric radiographs were analyzed and compared. Results: The average time for the correction of Class Ⅱ molar relationship was 4.6 months. And the mean distance of molar distalization was 4.4 mm. The Chinese Ni-Ti coil-springs also demostrated less tipping and better bodily movement of maxillary molars. Conclusion: This study suggests that the Chinese Ni-Ti coil-springs appliance distalizes the upper molar significantly, while there is no remarkable loss of anchorage because of patients’ wearing headgear with J hooks at night and Class Ⅱ elastics in the day time.
