For the problem posed by closely spaced modes, this paper defined the MCC (modal correlation criterion) to measure the degree of correlation between close modes. It was proved that structures with certain features ten...For the problem posed by closely spaced modes, this paper defined the MCC (modal correlation criterion) to measure the degree of correlation between close modes. It was proved that structures with certain features tend to have closely clustered modes and the corresponding mode shapes highly correlated. With this understanding, the closed-form expressions for controllability and observability Grammians were adopted to analyze the impacts of actuator/sensor placement on the controllability/observability of highly correlated close modes. On this basis, the problem of actuator/sensor placement, when the optimization criterion is based on modal controllability/observability, was simplified. Moreover, the dimension of the control/measurement vector in independent modal space control for highly correlated close modes was proved to have the potential to be reduced, therefore fewer actuators and sensors were required in this dimension-reduced control strategy. Finally, the desirable vibration suppression for an example structure showed that the theory and methods of this paper were accurate and effective.展开更多
One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the mo...One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the modal identification by the empirical mode decomposition (EMD) method, because of the separating capability of the method, it is still a challenge to consistently and reliably identify the parameters of structures of which modes are not well separated. A new method is introduced to generate the intrin- sic mode functions (IMFs) through the filtering algorithm based on the wavelet packet decomposition (GIFWPD). In this paper, it is demonstrated that the CIFWPD method alone has a good capability of separating close modes, even under the severe condition beyond the critical frequency ratio limit which makes it impossible to separate two closely spaced harmonics by the EMD method. However, the GIFWPD-only based method is impelled to use a very fine sampling frequency with consequent prohibitive computational costs. Therefore, in order to decrease the computational load by reducing the amount of samples and improve the effectiveness of separation by increasing the frequency ratio, the present paper uses a combination of the complex envelope displacement analysis (CEDA) and the GIFWPD method. For the validation, two examples from the previous works are taken to show the results obtained by the GIFWPD-only based method and by combining the CEDA with the GIFWPD method.展开更多
A new quantitative concept is introduced in this paper, which may be used to facilitate the measurement of the controllability of a subspace similar to subspace controllability degree. Then the concrete form of the su...A new quantitative concept is introduced in this paper, which may be used to facilitate the measurement of the controllability of a subspace similar to subspace controllability degree. Then the concrete form of the subspace controllability degree of a flexible structure is derived, and the errors of subspace controllability degree and dynamical response caused by the substitution of a repeated mode subspace for a closely spaced mode subspace are discussed. All the results show that this substitution is rational under some conditions.展开更多
By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dyna...By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dynamics is introduced to present the local deformation effects due to reaction forces at kinematic joints.A space four bar mechanism is utilized here as an example to describe the method of selecting static correction modes.Compared with vibration normal modes, static correction modes are demonstrated to be effective in numerical simulation.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 10872028)
文摘For the problem posed by closely spaced modes, this paper defined the MCC (modal correlation criterion) to measure the degree of correlation between close modes. It was proved that structures with certain features tend to have closely clustered modes and the corresponding mode shapes highly correlated. With this understanding, the closed-form expressions for controllability and observability Grammians were adopted to analyze the impacts of actuator/sensor placement on the controllability/observability of highly correlated close modes. On this basis, the problem of actuator/sensor placement, when the optimization criterion is based on modal controllability/observability, was simplified. Moreover, the dimension of the control/measurement vector in independent modal space control for highly correlated close modes was proved to have the potential to be reduced, therefore fewer actuators and sensors were required in this dimension-reduced control strategy. Finally, the desirable vibration suppression for an example structure showed that the theory and methods of this paper were accurate and effective.
基金supported by the State Key Program of National Natural Science of China (No. 11232009)the Shanghai Leading Academic Discipline Project (No. S30106)
文摘One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the modal identification by the empirical mode decomposition (EMD) method, because of the separating capability of the method, it is still a challenge to consistently and reliably identify the parameters of structures of which modes are not well separated. A new method is introduced to generate the intrin- sic mode functions (IMFs) through the filtering algorithm based on the wavelet packet decomposition (GIFWPD). In this paper, it is demonstrated that the CIFWPD method alone has a good capability of separating close modes, even under the severe condition beyond the critical frequency ratio limit which makes it impossible to separate two closely spaced harmonics by the EMD method. However, the GIFWPD-only based method is impelled to use a very fine sampling frequency with consequent prohibitive computational costs. Therefore, in order to decrease the computational load by reducing the amount of samples and improve the effectiveness of separation by increasing the frequency ratio, the present paper uses a combination of the complex envelope displacement analysis (CEDA) and the GIFWPD method. For the validation, two examples from the previous works are taken to show the results obtained by the GIFWPD-only based method and by combining the CEDA with the GIFWPD method.
基金The project supported by the National Natural Science Foundation of Chinathe Doctoral Research Foundation of Chinese Ministry of Education.
文摘A new quantitative concept is introduced in this paper, which may be used to facilitate the measurement of the controllability of a subspace similar to subspace controllability degree. Then the concrete form of the subspace controllability degree of a flexible structure is derived, and the errors of subspace controllability degree and dynamical response caused by the substitution of a repeated mode subspace for a closely spaced mode subspace are discussed. All the results show that this substitution is rational under some conditions.
文摘By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dynamics is introduced to present the local deformation effects due to reaction forces at kinematic joints.A space four bar mechanism is utilized here as an example to describe the method of selecting static correction modes.Compared with vibration normal modes, static correction modes are demonstrated to be effective in numerical simulation.