Design and Test of Closed Hydraulic Transmission System of 4WD High-clearance Wheeled Sprayer

In conjunction with the working characteristics of the high-clearance wheeled sprayer and the benefits of the closed hydraulic system,a series of reasonable working parameters should be established,and a hydraulic system that fulfills the requisite specifications should be designed.The AMESim software model is employed to construct a closed hydraulic transmission system,and the simulation analysis is then performed according to the data of hydraulic components.According to analysis results,the prototype can be optimized and upgraded,and a verification test is further carried out.The test results demonstrate that the designed closed hydraulic transmission system meets the actual working requirements of the high-clearance wheeled sprayer and provides a stable experimental platform for intelligent control of agricultural machinery.

Closed Loop Hydraulic System and Its Effect on Actuator Design

Hydraulic systems provide a clean and stable supply of hydraulic fluid for subsea valves and actuators installed on the subsea bed in subsea production systems.Subsea control systems are used for contemporary subsea fields instead of installing the control system on topside.Although all-electric subsea systems are state-of-the-art with benefits such as health,safety,and environment improvement,as well as efficiency and lower cost,hydraulic systems are still used for the development of many subsea fields.One of the main questions in the selection of a subsea hydraulic field is whether to choose an open or closed loop hydraulic system.The main characteristic of an open loop hydraulic system is that the hydraulic fluid is discharged into the marine environment during the actuation of the subsea valves.Conversely,the hydraulic fluid is returned to the topside facilities through an umbilical system in a closed loop system.Given that closed loop systems are more eco-friendly,the main question in this research is to examine the effect of the actuator connection of the closed loop system on actuator design.Two cases of actuated valves connected to a closed loop system are analyzed in this paper.The first is a 71/16-in.subsea slab gate valve in the pressure class of 517 bar with a linear spring return fail-safe close(FSC)actuator located on a manifold branch.The data indicates that the piston rod and cylinder diameter of the FSC linear actuator should be increased by some millimeters due to the accumulation of hydraulic oil at the bottom of the actuator.The hydraulic oil in the closed loop system helps in closing the actuator and spring force,so the spring constant and torque should be reduced as a result.The second case involves a 16-in.subsea ball valve in the pressure class of 517 bar with a double-acting fail-as-is rack and pinion actuator.The conclusion in this case is to avoid making any change in the design of double-acting actuator in connection to the closed loop system.