Two-dimensional particle-in-cell modeling of blow-off impulse by X-ray irradiation

Space objects such as spacecraft or missiles may be exposed to intense X-rays in outer space,leading to severe damage.The reinforcement of these objects to reduce the damage caused by X-ray irradiation is a significant concern.The blow-off impulse(BOI)is a crucial physical quantity for investigating material damage induced by X-ray irradiation.However,the accurate calculation of BOI is challenging,particularly for large deformations of materials with complex configurations.In this study,we develop a novel two-dimensional particle-in-cell code,Xablation2D,to calculate BOIs under far-field X-ray irradiation.This significantly reduces the dependence of the numerical simulation on the grid shape.The reliability of this code is verified by simulation results from open-source codes,and the calculated BOIs are consistent with the experimental and analytical results.

Study on γ-Ray Irradiation Mutation of Bacillus subtilis NCD-2

[Objective] To study the effect of 60Co γ-rays irradiation on Botrytis cinerea biocontrol strains—Bacillus subtilis NCD-2. [Method] NCD-2 cells were irradiated at different doses of γ-rays from 100 to 2 000 Gy. The strains were screened by plate confrontation method and Oxford cup diffusion. [Result] The curves of the relationship of irradiation dose and mutation and lethal rate were obtained. The results showed that lethal rate increased with the increasing of irradiation dose. The lethal rate of 1 000 Gy irradiation dose reached 99.50%. The mutation rate increased below 500 Gy and decreased above 500 Gy. The highest mutation rate occurred when the irradiation dose was between 400 and 700 Gy, and the average mutation rate was above 15%. The optimal irradiation dose was 500 Gy, when the average mutation rate was 26.51% and lethal rate was 77.71%. [Conclusion] This study provided references for γ-rays irradiation mutation of Bacillus subtilis.

SRAP Marker Analysis of Genomic Mutation Induced by ^(60)Coγ-Ray Irradiation in Potato (Solanum tuberosum)

[Objective] This study was to explore the mutagenic effect of 60Co γ-ray on Solanum tuberosum chromosomes.[Method] The 60Co γ-ray at different irradiation doses was applied to treat the minitubers of potato variety ＇Favorita＇,and the genomic mutations in VM1 and VM2 gene rations in treatments with different doses were analyzed by SRAP markers.[Resalt] Thirty pairs of SRAP primers out of 88 pairs exhibited polymorphism with a rate of 34.1％ in the bulked selection of VM1 generation.A total of 225 bands were obtained,of which 64 were polymorphic with a rate of 28.4％.The polymorphism was reflected in the forms of deleted bands and added bands.Based on the result of the bulked selection of VM1 generation,25 primers with polymorphism were selected to scan VM2 generation.Five primers performed poorly,and nine of the rest 20 pairs revealed polymorphism and obtained nine polymorphic bands,of which only four bands were detected in VM1 generation and the other five ones were newly deleted bands.Only 9.8％ of the bands detected in VM1 generation were obtained in VM2 generation.Eventually,nine stable and dear polymorphic bands were recovered and cloned,and DNA sequences of six bands of them were acquired by sequencing.According to the comparative analysis,five fragments sequences were similar to potato chromosome with a similarity rate of 77％-89％,three of them located at the resistance gene cluster; another one fragment had a similarity of 93％ with some regions of the No.5 chromosome in tomato.[Conclusion] 60Co γ-ray irradiation can cause mutation of genomic DNA in potato;there is no significant correlation between the number of polymorphic bands and the irradiation dose; potymorphic bands are characterized by a larger number of deleted bands than that of the added ones.

The Degradation of FB1 in Aqueous Acetonitrile and Corn Following γ-ray Irradiation

To investigate the degradation of FB1 in aqueous acetonitrile and corn af-ter γ-ray irradiation, the radiolytic products of FB1 was detected preliminarily. The results showed that γ-ray irradiation could degrade FB1 in aqueous acetonitrile;When the radiation dose was below 9 kGy, the degradation of FB1 in corn was not significant. The degradation rates of FB1 with concentrations of 0.8 mg/ml, 10.0 μg/ml, 1.0 μg/ml and 50 ng/ml after irradiation at 9 kGy were 22.5%, 51.0%, 59.0% and 64.8% respectively; when irradiation dose was increased to 100 kGy, the degrada-tion rate of FB1 with concentration of 0.8 mg/ml was up to 90%, and it was nearly 100% when irradiation dose was increased to 200 kGy. No representative products of FB1 were detected by LC/MS/MS analysis.

Enhanced Enzymatic Hydrolysis of Miscanthus sinensis Following Synergic Pretreatment with ^(60)Co γ-ray Irradiation and Alkaline Hydrogen Peroxide

[Objective] This study aimed to investigate the effects of different pretreat- ments on enzymatic saccharification of Miscanthus sinensis and improve reducing sugar yield in the enzymolysis process. [Method] M. sinensis was pretreated with 60Co y-ray irradiation and alkaline hydrogen peroxide, to analyze their effects on re- ducing sugar yield of enzymatic hydrolysis. [Result] After pretreatment with 400 kGy 60Co y-ray irradiation, reducing sugar yield in the enzymolysis process of M sinensis was 76.24 mg/g; after synergic pretreatment with 400 kGy 60Co y-ray irradiation and alkaline hydrogen peroxide, reducing sugar yield in the enzymolysis process of M. sinensis was 505.08 mg/g, which was improved by 5.6 times compared to that in pretreatment with 400 kGy 60Co y-ray irradiation. Based on process optimization, the optimal hydrolysis conditions were obtained： pretreatment temperature 30 ℃, NaOH concentration 1.2%, hydrogen peroxide concentration 2%, pretreatment time 6 h. [Conclusion] Synergic pretreatment with 60Co y-ray irradiation and alkaline hydrogen peroxide could significantly improve reducing sugar yield in the enzymolysis process of M. sinensis, which provided a new theoretical basis for preparing fuel ethanol with M. sinensis.

Review on synergistic damage effect of irradiation and corrosion on reactor structural alloys

The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fourth-generation fission nuclear energy structural materials used in pressurized water reactors and molten salt reactors.The competitive mechanisms of multiple influencing factors,such as the irradiation dose,corrosion type,and environmental temperature,are summarized in this paper.Conceptual approaches are proposed to alleviate the synergistic damage caused by irradiation and corrosion,thereby promoting in-depth research in the future and solving this key challenge for the structural materials used in reactors.

Effects of Corticosterone, cAMP, cGMP, Ca^(2+), and Protein Kinase C on Apoptosis of Mouse Thymocytes Induced by X-ray Irradiation

Objective To observe the effects of signal factors of corticosterone （CS）, cAMP, cGMP, Ca^2＋ and protein kinase C （PKC） on lymphocyte apoptosis in mouse thymus induced by X-rays of 4 Gy in vitro. Methods The DNA lyric rate for thymocytes was measured by fluomspectrophotometry. Results The DNA lyric rate for thymocytes 4-8 hours after irradiation with 2-8 Gy was significantly higher than that in the control （P〈0.01）. As compared with the control, the DNA lyric rate for thymocytes treated with 0.01 μnol/L CS （P〈0.01）, 50 ng/mL cAMP （P〈0.01）, 0.05-0.4 μg/mL ionomycin （Iono, P〈0.05 or P〈0.01） or 0.05-0.4 ng/mL phorbol myristate acetate （PMA, P〈0.05 or P〈0.01）, respectively, was significantly increased, while the rate for thymocytes treated with 50 ng/mL cGMP was not significantly increased. The DNA lyric rate for thymocytes treated with 0.01 μmol/L CS （P〈0.01）, 50 ng/mL cAMP （P〈0.01）, 0.2 and 0.4 μg/mL Iono （P〈0.05）, and 0.2 and 0.4 ng/mL PMA （P〈0.05） plus 4-Gy irradiation, respectively, was significantly higher than that treated with single 4-Gy irradiation, while the rate for thymocytes treated with 50 ng/mL cGMP plus 4-Gy irradiation was not increased. When both 0.4 I.tg/mL Iono and 0.4 ng/mL PMA acted on the thymocytes, the DNA lyric rate for thymocytes was significantly higher than that in the control （P〈0.01）, the DNA lytic rate for thymocytes treated with both 0.4 μg/mL Iono and 0.4 ng/mL PMA plus 4-Gy irradiation was significantly higher than that treated with single 4-Gy irradiation （P〈0.05）, but was Iono plus 4-Gy irradiation or 0.4 ng/mL PMA plus 4-Gy irradiation. can promote thymocyte apoptosis induced by larger dose X-rays. not significantly higher than that treated with 0.4 μg/mL Conclusion CS, cAMP, Ca^2＋, and PKC signal factors can promote thymocyte apoptosis induced by larger dose X-rays.

Degradation of nitrobenzene in wastewater by γ-ray irradiation

The degradation of nitrobenzene(NB) by γ ray irradiation was studied. The influences of dose rate and initial NB concentration were investigated in details. At a dose rate of 55 Gy/min, the degradation kinetics was pseudo first order at NB concentrations from 0 2 mmol/L to 4 0 mmol/L. At an initial NB concentration of 0 8 mmol/L, the degradation of NB at various dose rates also followed pseudo first order kinetics. Dissolved oxygen was found to have a positive effect on NB degradation. The degradation products were identified as nitrophenol, nitrosobenzene, and hydroquinone, and so on. Based on the product analysis, possible degradation pathways of nitrobenzene were proposed.

Preparation and Characterization of Fe3O4 Magnetic Nano-particles by ^（60）Co γ-ray Irradiation

By using a new method, ^60Co γ-ray irradiation, Fe3O4 magnetic nano-particles were successfully synthesized at room temperature under ambient pressure. The structure, morphology and magnetic properties of these nanoparticles were characterized by X-ray diffraction （XRD）, transmission electron microscope （TEM） and vibrating sample magnetometer （VSM）, respectively. The radiation formation mechanism was also discussed. The results show that the absorbed dose can greatly influence the structure, morphology and magnetic properties of the products. XRD and TEM studies show that the product prepared by γ-ray irradiation （10 kGy） is pure FesO4 phase and the mean diameter of these nano-particles is about 21 nm. The Fe3O4 nano-particles synthesized by γ-ray irradiation （10 kGy） are mainly in small cubic shape and the size uniformity of these particles is good.

γ-Ray Irradiation-Derived MnO/rGO Composites for High Performance Lithium Ion Batteries

We report a γ-ray irradiation reduction method to prepare MnO/reduced graphene oxide （rCO） nanocomposite for the anode of lithium ion batteries. γ-Ray irradiation provides a clean way to generate homogeneously dispersed MnO nanoparticles with finely tuned size on rGO surface without the use of surfactant. The MnO/rGO composite enables a fully charge/discharge in 2 min to gain a reversible specific capacity of 546 （mA-h）/g which is 45 higher than the theoretical value of commercial graphite anode.

Determination of Timer Error and Evaluation of Its Effect on Dose for OB6, GammaBeam X200 and X-Ray Irradiators at the Secondary Standard Dosimetry Laboratory in Nigeria

Timer error as well as its convention is very important for dose accuracy during irradiation. This paper determines the timer error of irradiators at Secondary Standard Dosimetry Laboratory (SSDL) in Nigeria. The irradiators are Cs-137 OB6 irradiator and X-ray irradiators at the Protection level SSDL;and Co-60 irradiator at the Therapy Level SSDL. PTW UNIDOS electrometer and LS01 Ionization chamber were used at the Protection Level to obtain doses for both Cs-137 OB6 and X-ray irradiators while an IBA farmer type ionization chamber and an IBA DOSE 1 electrometer were used at the Protection Level SSDL. Single/multiple exposure method and graphical method were used in the determination of the timer error for the three irradiators. The timer error obtained for Cs-137 OB6 irradiator was 0.48 ± 0.01 s, the timer error for the X-ray irradiator was 0.09 ± 0.01 s while the timer error obtained for GammaBeam X200 was 1.21 ± 0.04 s. It was observed that the timer error is not affected by source to detector distance. It was also observed that the timer error of Co-60 Gamma X200 irradiator is increasing with the age of the machine. Source to detector distance and field size do not contribute towards the timer error of the irradiators. The timer error of the Co-60 Gamma X200 irradiator (the only irradiator among the irradiators with a pneumatic system) increases with the age of the irradiator.

Neutron irradiation influence on high-power thyristor device under fusion environment

Because of their economy and applicability,high-power thyristor devices are widely used in the power supply systems for large fusion devices.When high-dose neutrons produced by deuterium–tritium(D–T)fusion reactions are irradiated on a thyristor device for a long time,the electrical characteristics of the device change,which may eventually cause irreversible damage.In this study,with the thyristor switch of the commutation circuit in the quench protection system(QPS)of a fusion device as the study object,the relationship between the internal physical structure and external electrical parameters of the irradiated thyristor is established.Subsequently,a series of targeted thyristor physical simulations and neutron irradiation experiments are conducted to verify the accuracy of the theoretical analysis.In addition,the effect of irradiated thyristor electrical characteristic changes on the entire QPS is studied by accurate simulation,providing valuable guidelines for the maintenance and renovation of the QPS.

Demonstration of irradiation-resistant 4H-SiC based photoelectrochemical water splitting

4H silicon carbide(4H-SiC)has gained a great success in high-power electronics,owing to its advantages of wide bandgap,high breakdown electric field strength,high carrier mobility,and high thermal conductivity.Considering the high carrier mobility and high stability of 4H-SiC,4H-SiC has great potential in the field of photoelectrochemical(PEC)water splitting.In this work,we demonstrate the irradiation-resistant PEC water splitting based on nanoporous 4H-SiC arrays.A new two-step anodizing approach is adopted to prepare 4H-SiC nanoporous arrays with different porosity,that is,a constant low-voltage etching followed by a pulsed high-voltage etching.The constant-voltage etching and pulsed-voltage etching are adopted to control the diameter of the nanopores and the depth of the nanoporous arrays,respectively.It is found that the nanoporous arrays with medium porosity has the highest PEC current,because of the enhanced light absorption and the optimized transportation of charge carriers along the walls of the nanoporous arrays.The performance of the PEC water splitting of the nanoporous arrays is stable after the electron irradiation with the dose of 800 and 1600 k Gy,which indicates that 4H-SiC nanoporous arrays has great potential in the PEC water splitting under harsh environments.

Effect of X-ray irradiation on threshold voltage of AlGaN/GaN HEMTs with p-GaN and MIS Gates

Commercially available AlGaN/GaN high-electron-mobility transistors(HEMTs)are beginning to enter the public scene froma range of suppliers.Based on previous studies,commercial GaN-based electronics are expected to be tolerant to different types of irradiation in space.To test this assumption,we compared the characteristic electrical curves obtained at different X-ray irradiation doses for GaN HEMT devices manufactured by Infineon and Transphorm.The p-GaN-based device was found to be more robust with a stable threshold voltage,whereas the threshold voltage of the device with ametal-insulator-semiconductor gatewas found to shift first in the negative and then the positive direction.This dynamic phenomenon is caused by the releasing and trapping effects of radiation-induced charges in the dielectric layer and at the interface of irradiated devices.As such,the p-GaNgate-based GaN HEMT provides a promising solution for use as an electric source in space.

In situ TEM investigation of electron irradiation and aging-induced high-density nanoprecipitates in an Mg-10Gd-3Y-1Zn-0.5Zr alloy

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3Y-1Zn-0.5Zr(GWZ1031K,wt.%)alloy to improve the hardness.The results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being treated.It is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous clusters.The latter plays a key role in precipitation hardening.This result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

Microwave irradiation-induced alterations in physicochemical properties and methane adsorption capability of coals:An experimental study using carbon molecular sieve

In order to comprehend the applicability of microwave irradiation for recovering coalbed methane,it is necessary to evaluate the microwave irradiation-induced alterations in coals with varying levels of metamorphism.In this work,the carbon molecular sieve combined with KMnO_(4)oxidation was selected to fabricate carbon molecular sieve with diverse oxidation degrees,which can serve as model substances toward coals.Afterwards,the microwave irradiation dependences of pores,functional groups,and highpressure methane adsorption characteristics of model substances were studied.The results indicated that microwave irradiation causes rearrangement of oxygen-containing functional groups,which could block the micropores with a size of 0.40-0.60 nm in carbon molecular sieve;meanwhile,naphthalene and phenanthrene generated by macro-molecular structure pyrolysis due to microwave irradiation could block the micropores with a size of 0.70-0.90 nm.These alterations in micropore structure weaken the saturated methane adsorption capacity of oxidized carbon molecular sieve by 2.91%-23.28%,suggesting that microwave irradiation could promote methane desorption.Moreover,the increased mesopores found for oxidized carbon molecular sieve after microwave irradiation could benefit CH4 diffusion.In summary,the oxidized carbon molecular sieve can act as model substances toward coals with different ranks.Additionally,microwave irradiation is a promising technology to enhance coalbed methane recovery.

The characteristics of DNA repair synthesis induced by DNA polymerase β in hepatoma cells after γ rays irradiation

AIM To investigate the effects of DNA repair synthesis induced by DNA polymerase β in hepatoma cells after γ ray irradiation. METHODS Cell nuclei were prepared from SMMC LTNM hepatoma which is a transplanted human liver cancer born on nude mice. Samples were irradiated with 60 Co γ rays at different doses or dose rates. N ethylmaleimide (NEM) and ddTTP were used as selective inhibitors to DNA polymerases. The reaction of DNA repair synthesis was carried out with the selective inhibitor test. RESULTS It was found that the 3H TTP incorporation in irradiated nuclei or calf thymus DNA was significantly higher than that in the non irradiated ones, under the conditions of DNA polymerase α or γ being inhibited. When NEM and ddTTP which selectively inhibits DNA polymerase β both existed in the DNA repair synthesis reaction mixture, the 3H TTP incorporation in irradiated DNA did not significantly increased. Furthermore, 3H TTP incorporation into DNA of SMMC LTNM hepatoma nuclei was higher than that of normal hepatocyte nuclei ( P <0 01). The DNA repair synthesis induced by DNA polymerase β reacted more fast in hepatoma nuclei than in hepatocyte nuclei. CONCLUSION The effects of DNA repair synthesis induced by DNA polymerase β in some tumor cells might be stronger than that in normal cells, which may facilitate the cells to repair DNA damages from radiation.

Facile g-ray irradiation synthesis of Pt/GA nanocomposite for catalytic reduction of 4-nitrophenol

Up to now,facile and pollution-free routes for catalyst preparation are in high demand.In this study,a green and cost-effective strategy was successfully developed to construct platinum/graphene aerogel(Pt/GA)nanocomposites by the co-reduction of graphene oxides(GO)and chloroplatinic acid(H_(2)PtCl6$6H_(2)O)with the assists of g-ray irradiation in the absence of any other reductants.Characterization studies indicated that the energy of g-ray irradiation and the hole scavenger isopropanol(IPA)played a vital role in forming small Pt nanoparticles with uniform size of~3 nm on the surface of graphene aerogel(GA).Furthermore,Pt/GA synthesized with a mass ratio of 2:1(Pt/GA-2)exhibited a lowest activation energy value and outstanding catalytic properties for the reduction of 4-nitrophenol(4-NP).The excellent catalytic and cycling performance suggest that Pt/GA-2 catalyst has a promising prospect for the reduction of nitroaromatic compounds in wastewater treatment and other industrial applications.

Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5)metallic glass and crystalline W

In this paper,high-energy Ne ions were used to irradiate Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) metallic glass(MG)and crystalline W to investigate their difference in mechanical response after irradiation.The results showed that with the irradiation dose increased,the tensile micro-strain increased,nano-hardness increased from 7.11 GPa to 7.90 GPa and 8.62 GPa,Young’s modulus increased,and H3/E2 increased which indicating that the plastic deformability decreased in crystalline W.Under the same irradiation conditions,the Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG still maintained the amorphous structure and became more disordered despite the longer range and stronger displacement damage of Ne ions in Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG than in crystalline W.Unlike the irradiation hardening and embrittlement behavior of crystalline W,Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG showed the gradual decrease in hardness from 6.02 GPa to 5.89 GPa and 5.50 GPa,the decrease in modulus and the increase in plastic deformability with the increasing dose.Possibly,the irradiation softening and toughening phenomenon of Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG could provide new ideas for the design of nuclear materials.

Effect of three-volt moxibustion with helium-neon laser irradiation on quality of care in patients with lumbar radiculopathy spondylosis

BACKGROUND Lumbar radiculopathy spondylosis is a relatively common orthopedic disease with a high incidence rate.It most commonly occurs in the lumbar 4-5 and lumbar 5-sacral 1 vertebrae,which account for approximately 95%of cases.It mostly occurs in people aged 30-50 years old and greatly affects their quality of life.AIM To determine the effect of triple-voltage acupuncture combined with helium-neon laser irradiation on the quality of care and improvement of symptoms in patients with lumbar radiculopathy spondylolisthesis.METHODS In this study,we selected 120 patients with lumbar radiculopathy spondylosis who were treated at our hospital between June 2019 to June 2020.The patients were divided into control and observation groups according to the random number table method,with 60 patients in each group.Patients in the observation group were treated with three-volt moxibustion combined with helium-neon laser irradiation,and those in the control group were treated with lumbar traction.After 1 month of treatment,the lumbar pain scores,lumbar spine motor functions,clinical treatment effects,and nursing satisfaction of the two groups were compared.RESULTS The results showed that acupuncture combined with laser irradiation significantly improved the patients'clinical symptoms,i.e.,reduced their low back pain,significantly lower numerical rating scale pain scores in the observation group than in the control group,and better lumbar spine motility than in the control group,compared to lumbar traction.In addition,they were cared for.The treatment effectiveness rate of the observation group was 95.5%,which was significantly higher than that of the control group(81.67%).Satisfaction with care was higher than 90 points in both groups,but the difference was not statistically significant.CONCLUSION Our study provides a clinical rationale for the future treatment of patients with lumbar spine disease.However,further extensive research is needed for validation.