The influence of different contents of Cr, Mo, and rare earth element(RE) additives on the thermal conductivity of austenitic medium manganese steel was studied and discussed. The results show that the addition of Cr ...The influence of different contents of Cr, Mo, and rare earth element(RE) additives on the thermal conductivity of austenitic medium manganese steel was studied and discussed. The results show that the addition of Cr in medium manganese steel can improved the ordering of C–Mn atomic clusters, so as to improve the steel's thermal conductivity. However, Cr will lead to precipitation of a great deal of carbides in medium manganese steel when its content is greater than 4wt%. These carbides would aggregate around the grain boundary, and as a result, the thermal conductivity is decreased. By the addition of Mo whose content is about 2wt%, spherical carbides will be formed, thus improving the thermal conductivity of the medium manganese steel. The interaction between rare earth elements and alloying elements will raise both the thermal conductivity and the wear-resisting property of medium manganese steel.展开更多
Ytterbium purification by an electrolysis reduction in sulfuric acid medium was investigated without nitrogen or argon protection, in which Ru-Ir-Ti alloy nets and mercury were used as anode and cathode, respectively....Ytterbium purification by an electrolysis reduction in sulfuric acid medium was investigated without nitrogen or argon protection, in which Ru-Ir-Ti alloy nets and mercury were used as anode and cathode, respectively. How the conditions such as the acidities of cathode and anode solutions, and the concentration of Yb（ Ⅲ ） to affect the circuit and ratio of Yb（ Ⅱ ）/Yb （ Ⅲ ） in electrolysis reduction were studied.展开更多
The structure of the yttrium modified Co-base alloy layers formed by laser cladding on 2Cr13 and 1Cr18Ni9Ti steel surfaces and its hot corrosion performance have been investigated systematically.The re- sults show tha...The structure of the yttrium modified Co-base alloy layers formed by laser cladding on 2Cr13 and 1Cr18Ni9Ti steel surfaces and its hot corrosion performance have been investigated systematically.The re- sults show that the Y-containing cobalt base clad alloy has a finer microstructure and higher corrosion re- sistance to the salt mixture of 75% Na_2SO_4+25%NaCl at high temperature.The unique properties are ob- tained with addition of 0.875% Y for the formation of a continuous and compact oxide scale.The compact scale may act as a barrier for the inward diffusion of oxygen and sulphur and also for the outward diffusion of alloying elements.展开更多
The cracking morphology of the hardfacing specimens taken from steel 5CrNiMo was observed. Meanwhile, the residual stress fields were measured and simulated. Based on experiment mentioned above, the improved structure...The cracking morphology of the hardfacing specimens taken from steel 5CrNiMo was observed. Meanwhile, the residual stress fields were measured and simulated. Based on experiment mentioned above, the improved structure and modified inclusion in hardfacing metal with rare earth （RE） oxide were analyzed. The results show that, the hardfacing crack is initiated from the coarse dendritic crystal grain boundary, inclusions and coarse austenite grain boundary in the HAZ and propagated by the residual stress existing in the center of the hardfacing metal and HAZ. The primary columnar grain structure can be refined by adding RE oxide in the coating of the electrode. The inclusion in the hardfacing metal can be modified as well. Meanwhile, if the martensite transformation temperature is decreased, the largest value of the residual tensile stress in the dangerous region can be reduced.展开更多
Layered Co-based ceramics with a nominal composition Bi2-xLaxSr2Co2O8-δ (x=0.0, 0.4, 0.8, short by BLC-222) were prepared using conventional solid state reaction method. X-ray photoemission spectroscopy (XPS) was use...Layered Co-based ceramics with a nominal composition Bi2-xLaxSr2Co2O8-δ (x=0.0, 0.4, 0.8, short by BLC-222) were prepared using conventional solid state reaction method. X-ray photoemission spectroscopy (XPS) was used to investigate their electronic structures. The cobalt ions are highly mixed valences of Co3+ and Co4+. The fraction of Co4+ almost keeps unchanged with the increase of x. The O-1s photoemission spectra show that there are lattice oxygen and chemical absorbed oxygen in all the samples. The substitution of Bi3+ by La3+ results in a change from metallic-like behavior to semiconductor behavior. This abnormal phenomenon means that La3+ plays a key role in effecting the electrical transport property of BLC-222. The O-Co covalence bond is strengthened by the increase of La3+, which results in the decrease of conductivity.展开更多
Synergistic extraction of cerium（IV） from sulfuric acid medium using mixture of 2-ethylhexyl phosphonic acid mono 2-ethylhexyl ester（HEH/EHP, HL） and Di-（2-ethyl hexyl） phosphoric acid（HDEHP, HA） as extractant...Synergistic extraction of cerium（IV） from sulfuric acid medium using mixture of 2-ethylhexyl phosphonic acid mono 2-ethylhexyl ester（HEH/EHP, HL） and Di-（2-ethyl hexyl） phosphoric acid（HDEHP, HA） as extractant was investigated.The results indicated that the maximum synergistic enhancement coefficients were obtained at the mole fraction of HEH/EHP=0.6, and cerium（IV） was extracted into organic phase in the form of Ce（SO4）0.5HL2A2.A cation exchange mechanism was proposed for the synergistic extraction of Ce（IV）.The equilibrium constants and thermodynamic functions such as △G, △H, and △S were determined in the extraction of Ce（IV） from sulfuric medium using mixture of HEH/EHP and HDEHP.展开更多
The influence of the composition （Yb2O3, MgO, CeO2, Li2CO3） on the dielectric properties of medium temperature sintering （Ba, Sr）TiO3 （BST） series capacitor ceramics was investigated by means of conventional tec...The influence of the composition （Yb2O3, MgO, CeO2, Li2CO3） on the dielectric properties of medium temperature sintering （Ba, Sr）TiO3 （BST） series capacitor ceramics was investigated by means of conventional technology process and orthogonal design experiments. The major secondary influencing factors and the influencing tendency of various factor＇s levels for the dielectric properties of BST ceramics were obtained. The optimum formula for maximum dielectric constant （ε） and for minimum dielectric loss （tanδ） was obtained under the experimental conditions. The BST ceramics with optimum comprehensive properties was obtained by means of orthogonal design experiments, with the sintering temperature at 1200 ℃, the dielectric constant 5239, the dielectric loss 0.0097, withstand electric voltage over 6 MV·m^-1, capacitance temperature changing ence of various components on the providing the basis for preparation rate （△C/C） - 75.67%, and suited for Y5V character. The mechanism of the infludielectric properties of medium temperature sintering BST ceramics was studied, thus of multilayer capacitor ceramics and single-chip capacitor ceramics.展开更多
文摘The influence of different contents of Cr, Mo, and rare earth element(RE) additives on the thermal conductivity of austenitic medium manganese steel was studied and discussed. The results show that the addition of Cr in medium manganese steel can improved the ordering of C–Mn atomic clusters, so as to improve the steel's thermal conductivity. However, Cr will lead to precipitation of a great deal of carbides in medium manganese steel when its content is greater than 4wt%. These carbides would aggregate around the grain boundary, and as a result, the thermal conductivity is decreased. By the addition of Mo whose content is about 2wt%, spherical carbides will be formed, thus improving the thermal conductivity of the medium manganese steel. The interaction between rare earth elements and alloying elements will raise both the thermal conductivity and the wear-resisting property of medium manganese steel.
文摘Ytterbium purification by an electrolysis reduction in sulfuric acid medium was investigated without nitrogen or argon protection, in which Ru-Ir-Ti alloy nets and mercury were used as anode and cathode, respectively. How the conditions such as the acidities of cathode and anode solutions, and the concentration of Yb（ Ⅲ ） to affect the circuit and ratio of Yb（ Ⅱ ）/Yb （ Ⅲ ） in electrolysis reduction were studied.
基金Research Project supported by the Corrosion Science Laboratory,Academia Sinica
文摘The structure of the yttrium modified Co-base alloy layers formed by laser cladding on 2Cr13 and 1Cr18Ni9Ti steel surfaces and its hot corrosion performance have been investigated systematically.The re- sults show that the Y-containing cobalt base clad alloy has a finer microstructure and higher corrosion re- sistance to the salt mixture of 75% Na_2SO_4+25%NaCl at high temperature.The unique properties are ob- tained with addition of 0.875% Y for the formation of a continuous and compact oxide scale.The compact scale may act as a barrier for the inward diffusion of oxygen and sulphur and also for the outward diffusion of alloying elements.
基金Project supported by Key Project of Science and Technology of Hebei Province (04212201D) and Research Foundationfor theReturned Overseas Chinese Scholars of State Education Ministry
文摘The cracking morphology of the hardfacing specimens taken from steel 5CrNiMo was observed. Meanwhile, the residual stress fields were measured and simulated. Based on experiment mentioned above, the improved structure and modified inclusion in hardfacing metal with rare earth （RE） oxide were analyzed. The results show that, the hardfacing crack is initiated from the coarse dendritic crystal grain boundary, inclusions and coarse austenite grain boundary in the HAZ and propagated by the residual stress existing in the center of the hardfacing metal and HAZ. The primary columnar grain structure can be refined by adding RE oxide in the coating of the electrode. The inclusion in the hardfacing metal can be modified as well. Meanwhile, if the martensite transformation temperature is decreased, the largest value of the residual tensile stress in the dangerous region can be reduced.
基金the National Nature Science Foundation of China (20571019)the Project-sponsored by SRF for ROCS ,HLJ (LC06C13)+1 种基金Project-Sponsored by Program of Harbin Subject Chief Scientist (2006RFXXG001)Development Programfor Outstanding Young Teachers in Harbin Institute of Technology (HITQNJS.2006.028)
文摘Layered Co-based ceramics with a nominal composition Bi2-xLaxSr2Co2O8-δ (x=0.0, 0.4, 0.8, short by BLC-222) were prepared using conventional solid state reaction method. X-ray photoemission spectroscopy (XPS) was used to investigate their electronic structures. The cobalt ions are highly mixed valences of Co3+ and Co4+. The fraction of Co4+ almost keeps unchanged with the increase of x. The O-1s photoemission spectra show that there are lattice oxygen and chemical absorbed oxygen in all the samples. The substitution of Bi3+ by La3+ results in a change from metallic-like behavior to semiconductor behavior. This abnormal phenomenon means that La3+ plays a key role in effecting the electrical transport property of BLC-222. The O-Co covalence bond is strengthened by the increase of La3+, which results in the decrease of conductivity.
基金support by the High Technology Research and Development Programme (2006AA06Z123) National Key Technology Research and Development Programme (2006BAC02A06) of China
文摘Synergistic extraction of cerium（IV） from sulfuric acid medium using mixture of 2-ethylhexyl phosphonic acid mono 2-ethylhexyl ester（HEH/EHP, HL） and Di-（2-ethyl hexyl） phosphoric acid（HDEHP, HA） as extractant was investigated.The results indicated that the maximum synergistic enhancement coefficients were obtained at the mole fraction of HEH/EHP=0.6, and cerium（IV） was extracted into organic phase in the form of Ce（SO4）0.5HL2A2.A cation exchange mechanism was proposed for the synergistic extraction of Ce（IV）.The equilibrium constants and thermodynamic functions such as △G, △H, and △S were determined in the extraction of Ce（IV） from sulfuric medium using mixture of HEH/EHP and HDEHP.
文摘The influence of the composition （Yb2O3, MgO, CeO2, Li2CO3） on the dielectric properties of medium temperature sintering （Ba, Sr）TiO3 （BST） series capacitor ceramics was investigated by means of conventional technology process and orthogonal design experiments. The major secondary influencing factors and the influencing tendency of various factor＇s levels for the dielectric properties of BST ceramics were obtained. The optimum formula for maximum dielectric constant （ε） and for minimum dielectric loss （tanδ） was obtained under the experimental conditions. The BST ceramics with optimum comprehensive properties was obtained by means of orthogonal design experiments, with the sintering temperature at 1200 ℃, the dielectric constant 5239, the dielectric loss 0.0097, withstand electric voltage over 6 MV·m^-1, capacitance temperature changing ence of various components on the providing the basis for preparation rate （△C/C） - 75.67%, and suited for Y5V character. The mechanism of the infludielectric properties of medium temperature sintering BST ceramics was studied, thus of multilayer capacitor ceramics and single-chip capacitor ceramics.
