Hollow nanostructures with external shells and inner voids have been proved to greatly shorten the transport distance of ions/electrons and buffer volume change,especially for the large-sized potassium-ions in seconda...Hollow nanostructures with external shells and inner voids have been proved to greatly shorten the transport distance of ions/electrons and buffer volume change,especially for the large-sized potassium-ions in secondary batteries.In this work,hollow carbon(HC) nanospheres embedded with S,P co-doped NiSe_(2)nanoparticles are fabricated by "drop and dry" and "dissolving and precipitation" processes to form Ni(OH)2nanocrystals followed by annealing with S and P dopants to form nanoparticles.The resultant S,P-NiSe_(2)/HC composite exhibits excellent cyclic performance with 131.6 mA h g^(-1)at1000 mA g^(-1)after 3000 cycles for K^(+)storage and a capacity of 417.1 mA h g^(-1)at 1000 mA g^(-1)after1000 cycles for Li^(+)storage.K-ion full cells are assembled and deliver superior cycling stability with a ca pacity of 72.5 mA h g^(-1)at 200 mA g^(-1)after 500 cycles.The hollow carbon shell with excellent electrical conductivity effectively promotes the transporta tion and tolerates large volume variation for both K^(+)and Li^(+).Density functional theory calculations confirm that the S and P co-doping NiSe_(2) enables stronger adsorption of K^(+)ions and higher electrical conductivity that contributes to the improved electrochemical performance.展开更多
Layered LiCoO_(2)(LCO)acts as a dominant cathode material for lithium-ion batteries(LIBs)in 3C products because of its high compacted density and volumetric energy density.Although improving the high cutoff voltage is...Layered LiCoO_(2)(LCO)acts as a dominant cathode material for lithium-ion batteries(LIBs)in 3C products because of its high compacted density and volumetric energy density.Although improving the high cutoff voltage is an effective strategy to increase its capacity,such behavior would trigger rapid capacity decay due to the surface or/and structure degradation.Herein,we propose a bi-functional surface strategy involving constructing a robust spinel-like phase coating layer with great integrity and compatibility to LiCoO_(2) and modulating crystal lattice by anion and cation gradient co-doping at the subsurface.As a result,the modified LiCoO_(2)(AFM-LCO)shows a capacity retention of 80.9%after 500 cycles between 3.0and 4.6 V.The Al,F,Mg enriched spinel-like phase coating layer serves as a robust physical barrier to effectively inhibit the undesired side reactions between the electrolyte and the cathode.Meanwhile,the Al,F,Mg gradient co-doping significantly enhances the surficial structure stability,suppresses Co dissolution and oxygen release,providing a stable path for Li-ions mobility all through the long-term cycles.Thus,the surface bi-functional strategy is an effective method to synergistically improve the electrochemical performances of LCO at a high cut-off voltage of 4.6 V.展开更多
A novel lanthanum and sulfur co-doped TiO2 photocatalyst was synthesized by precipitation- dipping method, and characterized by X-ray diffraction（XRD）, transmission electron microscopy（TEM） and UV-Vis diffuse refl...A novel lanthanum and sulfur co-doped TiO2 photocatalyst was synthesized by precipitation- dipping method, and characterized by X-ray diffraction（XRD）, transmission electron microscopy（TEM） and UV-Vis diffuse reflectance spectroscopy. Compared with the S-doped TiO, La-doped TiO2 and the standard Degussa P25 photocatalysts, the lanthanum and sulfur co-doped TiO2 photocatalyst （the molar percentage of La is 3.0%） calcined at 450 ℃ for 2 h showed the strongest absorption for visible light and highest activities for degradation of reactive blue 19 dye in aqueous solution under visible light（λ〉400 nm） irradiation. It was also discovered that the co-doping of lanthanum and sulfur hindered the aggregation and growth of TiO2 particles, and the doping of lanthanum reduced slightly the phase transition temperature ofTiO2 from anatase to rutile.展开更多
Aqueous rechargeable zinc-based batteries have attracted increasing interest and been considered potential alternatives for state-of-the-art lithium-ion batteries because of the low cost and high safety.Many cathode m...Aqueous rechargeable zinc-based batteries have attracted increasing interest and been considered potential alternatives for state-of-the-art lithium-ion batteries because of the low cost and high safety.Many cathode materials have been gradually developed and demonstrated excellent electrochemical performances.However,the complex electrochemistry,inevitable hydrogen release,and zinc corrosion severely hinder the practical application.The most concerned Zn-MnO_(2)batteries still suffer from the Mn dissolution and formation of byproducts.By adding organic solvents to inhibit the activity of water molecules,the hydrous organic electrolytes provide a sound solution for eliminating the unfavorable factors.Here we report a tetraethylene glycol dimethyl ether-based hydrous organic electrolyte consisting of LiClO_(4)·3H_(2)O and Zn(ClO4)2·6H2O,and a birnessite-type MnO_(2)cathode material for Zn-MnO_(2)batteries.The Li+/Zn2+ions co-(de)insertion mechanism is ascertained by the structural and morphological analyses.The electrostatic interaction between inserted ions and crystal structure is reduced effectively by employment of monovalent Li+ions,which ensures structural stability of cathode materials.Hydrous tetraglyme electrolyte inhibits the activity of water molecules and thus avoids the formation of byproduct Zn_(4)ClO_(4)(OH)7·Meanwhile,highly stable Zn plating/stripping for over 1500 h,an average coulombic efficiency of>99%in long-term cycling,and ultralong storage life(the cells can work well after stored over 1 year)are simultaneously realized in the novel electrolyte.Benefitting from these aspects,the Zn-MnO_(2)batteries manifest high specific capacity of 132 mA h g^(-1),an operating voltage of 1.25 V,and a capacity retention of>98%after 1000 cycles at a current density of 200 mA g^(-1).展开更多
Hydrodeoxygenation of furfural(FF)into 2-methylfuran(MF)is a significant biomass utilization route.However,designing efficient and stable non-noble metal catalyst is still a huge challenge.Herein,we reported the N,O c...Hydrodeoxygenation of furfural(FF)into 2-methylfuran(MF)is a significant biomass utilization route.However,designing efficient and stable non-noble metal catalyst is still a huge challenge.Herein,we reported the N,O co-doped carbon anchored with Co nanoparticles(Co-SFB)synthesized by employing the organic ligands with the target heteroatoms.Raman,electron paramagnetic resonance(EPR),electrochemical impedance spectroscopy(EIS),and X-ray photoelectron spectroscopy(XPS)characterizations showed that the co-doping of N and O heteroatoms in the carbon support endows Co-SFB with enriched lone pair electrons,fast electron transfer ability,and strong metal-support interaction.These electronic properties resulted in strong FF adsorption as well as lower apparent reaction activation energy.At last,the obtained N,O co-doped Co/C catalyst showed excellent catalytic activity(nearly 100 mol%FF conversion and 94.6 mol%MF yield)and stability for in-situ dehydrogenation of FF into MF.This N,O co-doping strategy for the synthesis of highly efficient catalytic materials with controllable electronic state will provide an excellent opportunity to better understand the structure-function relationship.展开更多
Undoped and Ni–S co-doped mesoporous TiO2 nano materials were synthesized by using sol–gel method.The characteristic features of as prepared catalyst samples were investigated using various advanced spectroscopic an...Undoped and Ni–S co-doped mesoporous TiO2 nano materials were synthesized by using sol–gel method.The characteristic features of as prepared catalyst samples were investigated using various advanced spectroscopic and analytical techniques.The characterization results of the samples revealed that all the samples exhibited anatase phase(XRD),decreasing band gap(2.68 eV)(UV–Vis-DRS),small particle size(9.2 nm)(TEM),high surface area(142.156 m^2·g^-1)(BET),particles with spherical shape and smooth morphology(SEM);there is a frequency shift observed for co-doped sample(FT-IR)and the elemental composition electronic states and position of the doped elements(Ni and S)in the TiO2 lattice analyzed by XPS and EDX.These results supported the photocatalytic degradation of Bismarck Brown Red(BBR)achieved with in 110 min and also exhibited the antibacterial activity on Staphylococcus aureus(MTCC-3160),Pseudomonas fluorescence(MTCC-1688)under visible light irradiation.展开更多
P2-Na_(0.67)N_(i0.33)Mn_(0.67)O_(2)is considered as a promising cathode material for sodium-ion battery (SIBs)because of its high capacity and discharge potential.However,its practical use is limited by Na^(+)/vacancy...P2-Na_(0.67)N_(i0.33)Mn_(0.67)O_(2)is considered as a promising cathode material for sodium-ion battery (SIBs)because of its high capacity and discharge potential.However,its practical use is limited by Na^(+)/vacancy ordering and P2-O2 phase transition.Herein,a Ti^(4+)/F^(-) co-doping strategy is developed to address these issues.The optimal P2-Na_(0.67)Ni_(0.33)Mn_(0.37)Ti_(0.3)O_(1.9)F_(0.1) exhibits much enhanced sodium storage performance in the high voltage range of 2.0–4.4 V,including a cycling stability of 77.2%over 300cycles at a rate of 2 C and a high-rate capability of 87.7 m Ah g^(-1) at 6 C.Moreover,the P2-Na_(0.67)Ni_(0.33)Mn_(0.37)Ti_(0.3)O_(1.9)F_(0.1) delivers reversible capacities of 82.7 and 128.1 m Ah g^(-1) at-10 and 50℃ at a rate of 2 C,respectively.The capacity retentions over 200 cycles at-10℃ is 94.2%,implying more opportunity for practical application.In-situ X-ray diffraction analysis reveals that both P2-O2 phase transitions and Na^(+)/vacancy ordering is suppressed by Ti^(4+)/F^(-) co-doping,which resulting in fast Na^(+) diffusion and stable phase structure.The hard carbon//P2-Na_(0.67)Ni_(0.33)Mn_(0.37)Ti_(0.3)O_(1.9)F_(0.1) full cell exhibits a high energy density of 310.2 Wh kg^(-1) and remarkable cyclability with 82.1%retention after 300 cycles at 1 C in the voltage range of 1.5–4.2 V.These results demonstrate that the co-doping Ti^(4+)/F^(-) is a promising strategy to improve the electrochemical properties of P2-Na_(0.67)Ni_(0.33)Mn_(0.67)O_(2),providing a facile tactic to develop high performance cathode materials for SIBs.展开更多
To clarify the contribution of oxygen vacancies to room-temperature ferromagnetism(RTFM)in cobalt doped TiO_(2)(Co-TiO_(2)),and in order to obtain the high level of magnetization suitable for spintronic devices,in thi...To clarify the contribution of oxygen vacancies to room-temperature ferromagnetism(RTFM)in cobalt doped TiO_(2)(Co-TiO_(2)),and in order to obtain the high level of magnetization suitable for spintronic devices,in this work,Co-TiO_(2) nano-particles are prepared via the sol-gel route,followed by vacuum annealing for different durations,and the influence of vacu-um annealing duration on the structure and room-temperature magnetism of the compounds is examined.The results reveal that with an increase in annealing duration,the concentration of oxygen vacancies rises steadily,while the saturation magnetiza-tion(Ms)shows an initial gradual increase,followed by a sharp decline,and even disappearance.The maximum Ms is as high as 1.19 emu/g,which is promising with respect to the development of spintronic devices.Further analysis reveals that oxygen va-cancies,modulated by annealing duration,play a critical role in tuning room-temperature magnetism.An appropriate concentra-tion of oxygen vacancies is beneficial in terms of promoting RTFM in Co-TiO_(2).However,excessive oxygen vacancies will result in a negative impact on RTFM,due to antiferromagnetic superexchange interactions originating from nearest-neighbor Co^(2+)ions.展开更多
Developing high-performance aqueous Zn-ion batteries from sustainable biomass becomes increasingly vital for large-scale energy storage in the foreseeable future.Therefore,γ-MnO_(2) uniformly loaded on N-doped carbon...Developing high-performance aqueous Zn-ion batteries from sustainable biomass becomes increasingly vital for large-scale energy storage in the foreseeable future.Therefore,γ-MnO_(2) uniformly loaded on N-doped carbon derived from grapefruit peel is successfully fabricated in this work,and particularly the composite cathode with carbon carrier quality percentage of 20 wt%delivers the specific capacity of 391.2 mAh g^(−1)at 0.1 A g^(−1),outstanding cyclic stability of 92.17%after 3000 cycles at 5 A g^(−1),and remarkable energy density of 553.12 Wh kg^(−1) together with superior coulombic efficiency of~100%.Additionally,the cathodic biosafety is further explored specifically through in vitro cell toxicity experiments,which verifies its tremendous potential in the application of clinical medicine.Besides,Zinc ion energy storage mechanism of the cathode is mainly discussed from the aspects of Jahn–Teller effect and Mn domains distribution combined with theoretical analysis and experimental data.Thus,a novel perspective of the conversion from biomass waste to biocompatible Mn-based cathode is successfully developed.展开更多
Inactive elemental doping is commonly used to improve the structural stability of high-voltage layered transition-metal oxide cathodes.However,the one-step co-doping strategy usually results in small grain size since ...Inactive elemental doping is commonly used to improve the structural stability of high-voltage layered transition-metal oxide cathodes.However,the one-step co-doping strategy usually results in small grain size since the low diffusivity ions such as Ti^(4+)will be concentrated on grain boundaries,which hinders the grain growth.In order to synthesize large single-crystal layered oxide cathodes,considering the different diffusivities of different dopant ions,we propose a simple two-step multi-element co-doping strategy to fabricate core–shell structured LiCoO_(2)(CS-LCO).In the current work,the high-diffusivity Al^(3+)/Mg^(2+)ions occupy the core of single-crystal grain while the low diffusivity Ti^(4+)ions enrich the shell layer.The Ti^(4+)-enriched shell layer(~12 nm)with Co/Ti substitution and stronger Ti–O bond gives rise to less oxygen ligand holes.In-situ XRD demonstrates the constrained contraction of c-axis lattice parameter and mitigated structural distortion.Under a high upper cut-off voltage of 4.6 V,the single-crystal CS-LCO maintains a reversible capacity of 159.8 mAh g^(−1)with a good retention of~89%after 300 cycles,and reaches a high specific capacity of 163.8 mAh g^(−1)at 5C.The proposed strategy can be extended to other pairs of low-(Zr^(4+),Ta^(5+),and W6+,etc.)and high-diffusivity cations(Zn^(2+),Ni^(2+),and Fe^(3+),etc.)for rational design of advanced layered oxide core–shell structured cathodes for lithium-ion batteries.展开更多
In this work, ZnO, Ce<sup>3+</sup> doped ZnO (ZnO/Ce<sup>3+</sup>) and Cu<sup>2+</sup> + Ce<sup>3+</sup> co-doped ZnO (ZnO/Cu<sup>2+</sup> + Ce<sup>3+&...In this work, ZnO, Ce<sup>3+</sup> doped ZnO (ZnO/Ce<sup>3+</sup>) and Cu<sup>2+</sup> + Ce<sup>3+</sup> co-doped ZnO (ZnO/Cu<sup>2+</sup> + Ce<sup>3+</sup> ) solid solutions powders were synthesized by a solution combustion method maintaining the Ce<sup>3+</sup> ion concentration constant in 3%Wt while the Cu<sup>2+</sup> ion concentration was varied in 1, 2, 3, 10 and 20%Wt. After its synthesis, all the samples were annealed at 900?C by 24 h. The ZnO, ZnO/Ce<sup>3+</sup> and ZnO/Cu<sup>2+</sup> + Ce<sup>3+</sup> powders were structurally characterized using X-ray diffraction (XRD) technique, and the XRD patterns showed that for pure ZnO, Cu<sup>2+</sup> undoped ZnO/Ce<sup>3</sup><sup>+</sup> and ZnO/Ce<sup>3+</sup> doped with the Cu<sup>2+</sup> ion, the three samples exhibited the hexagonal wurtzite ZnO crystalline structure. However, the morphology and particle size of both samples were observed by means of a scanning electron microscopy (SEM);from SEM image, it is observed that the crystallites of both samples are agglomerated forming bigger amorphous particles with an approximate average size of 1 μm. In addition, the photoluminescence of the ZnO, Ce<sup>3+</sup> doped ZnO and Cu<sup>2+</sup> + Ce<sup>3+</sup> doped ZnO samples was measurement under an illumination of 209 nm wavelength (UV region): for the ZnO/Ce<sup>3+</sup> sample, your emission spectrum is in the visible region from blue color until red color;the UV band of the ZnO is suppressed. The multicolor emission visible is attributed to the Ce<sup>3+</sup> ion photoluminescence, while for the ZnO/Cu<sup>2+</sup> + Ce<sup>3+</sup>, its emission PL spectrum is quenching by the Cu<sup>2+</sup> ion, present in the ZnO crystalline.展开更多
One-dimensional, diluted magnetic semiconductor nanofibers have attracted increasing attention for their unique magnetic properties, large specific surface area, and high porosity. These qualities lead to excellent pe...One-dimensional, diluted magnetic semiconductor nanofibers have attracted increasing attention for their unique magnetic properties, large specific surface area, and high porosity. These qualities lead to excellent performance in magneto-optical devices, magnetic resonance imaging, ferrofluids and magnetic separation. The purpose of this study is to fabricate P-type one dimensional CuAlO2-based diluted magnetic semiconductor nanofibers. First, we fabricated CuAl0.95Co0.05O2 nanofibers with an average diameter of 1 μm with the electrospinning method. The annealed nanofibers were thermally treated at a temperature of 1 100℃ and then shrunk to a diameter of about 650 nm. We used X-ray diffraction measurements and Raman spectra to confirm that the CUAl0.95CO0.05O2 nanofihers had a single impurity free delafossite phase. The X-ray photoelectron spectroscopy analysis indicates that Co was present in the ＋2 oxidation state, resulting in an room temperature ferromagnetism in the CHAl0.95Co0.05O2 fiber. This contrststs with nonmagnetism in pristine CuAlO2 fiber. The coercivity （Hc） value of 65.26 Oe and approximate saturation magnetization （Ms） of 0.012 emu/g demonstrate good evidence of ferromagnetism at room temperature for CuAl0.95Co0.05O2 nanofibers.展开更多
基金financially supported by the Shenzhen Science and Technology Program(JCYJ20220530141012028),ChinaThe National Natural Science Foundation of China(22005178),China+2 种基金The Key Research and Development Program of Shandong Province(2021ZLGX01),ChianThe fellowship of China Postdoctoral Science Foundation(2022M722333),Chianthe Jiangsu Funding Program for Excellent Postdoctoral Talent,Chian。
文摘Hollow nanostructures with external shells and inner voids have been proved to greatly shorten the transport distance of ions/electrons and buffer volume change,especially for the large-sized potassium-ions in secondary batteries.In this work,hollow carbon(HC) nanospheres embedded with S,P co-doped NiSe_(2)nanoparticles are fabricated by "drop and dry" and "dissolving and precipitation" processes to form Ni(OH)2nanocrystals followed by annealing with S and P dopants to form nanoparticles.The resultant S,P-NiSe_(2)/HC composite exhibits excellent cyclic performance with 131.6 mA h g^(-1)at1000 mA g^(-1)after 3000 cycles for K^(+)storage and a capacity of 417.1 mA h g^(-1)at 1000 mA g^(-1)after1000 cycles for Li^(+)storage.K-ion full cells are assembled and deliver superior cycling stability with a ca pacity of 72.5 mA h g^(-1)at 200 mA g^(-1)after 500 cycles.The hollow carbon shell with excellent electrical conductivity effectively promotes the transporta tion and tolerates large volume variation for both K^(+)and Li^(+).Density functional theory calculations confirm that the S and P co-doping NiSe_(2) enables stronger adsorption of K^(+)ions and higher electrical conductivity that contributes to the improved electrochemical performance.
基金supported by the National Natural Science Foundation of China(22075170,52072233)the Beijing National Laboratory for Condensed Matter Physics。
文摘Layered LiCoO_(2)(LCO)acts as a dominant cathode material for lithium-ion batteries(LIBs)in 3C products because of its high compacted density and volumetric energy density.Although improving the high cutoff voltage is an effective strategy to increase its capacity,such behavior would trigger rapid capacity decay due to the surface or/and structure degradation.Herein,we propose a bi-functional surface strategy involving constructing a robust spinel-like phase coating layer with great integrity and compatibility to LiCoO_(2) and modulating crystal lattice by anion and cation gradient co-doping at the subsurface.As a result,the modified LiCoO_(2)(AFM-LCO)shows a capacity retention of 80.9%after 500 cycles between 3.0and 4.6 V.The Al,F,Mg enriched spinel-like phase coating layer serves as a robust physical barrier to effectively inhibit the undesired side reactions between the electrolyte and the cathode.Meanwhile,the Al,F,Mg gradient co-doping significantly enhances the surficial structure stability,suppresses Co dissolution and oxygen release,providing a stable path for Li-ions mobility all through the long-term cycles.Thus,the surface bi-functional strategy is an effective method to synergistically improve the electrochemical performances of LCO at a high cut-off voltage of 4.6 V.
基金the National Natural Science Foundation of China(No.20677008)the Innovation Foundation of Donghua University for Doctors
文摘A novel lanthanum and sulfur co-doped TiO2 photocatalyst was synthesized by precipitation- dipping method, and characterized by X-ray diffraction（XRD）, transmission electron microscopy（TEM） and UV-Vis diffuse reflectance spectroscopy. Compared with the S-doped TiO, La-doped TiO2 and the standard Degussa P25 photocatalysts, the lanthanum and sulfur co-doped TiO2 photocatalyst （the molar percentage of La is 3.0%） calcined at 450 ℃ for 2 h showed the strongest absorption for visible light and highest activities for degradation of reactive blue 19 dye in aqueous solution under visible light（λ〉400 nm） irradiation. It was also discovered that the co-doping of lanthanum and sulfur hindered the aggregation and growth of TiO2 particles, and the doping of lanthanum reduced slightly the phase transition temperature ofTiO2 from anatase to rutile.
基金supported by the National Natural Science Foundation of China(U1801255,91963210)the National Natural Science Foundation of Guangzhou,China(202201011414)。
文摘Aqueous rechargeable zinc-based batteries have attracted increasing interest and been considered potential alternatives for state-of-the-art lithium-ion batteries because of the low cost and high safety.Many cathode materials have been gradually developed and demonstrated excellent electrochemical performances.However,the complex electrochemistry,inevitable hydrogen release,and zinc corrosion severely hinder the practical application.The most concerned Zn-MnO_(2)batteries still suffer from the Mn dissolution and formation of byproducts.By adding organic solvents to inhibit the activity of water molecules,the hydrous organic electrolytes provide a sound solution for eliminating the unfavorable factors.Here we report a tetraethylene glycol dimethyl ether-based hydrous organic electrolyte consisting of LiClO_(4)·3H_(2)O and Zn(ClO4)2·6H2O,and a birnessite-type MnO_(2)cathode material for Zn-MnO_(2)batteries.The Li+/Zn2+ions co-(de)insertion mechanism is ascertained by the structural and morphological analyses.The electrostatic interaction between inserted ions and crystal structure is reduced effectively by employment of monovalent Li+ions,which ensures structural stability of cathode materials.Hydrous tetraglyme electrolyte inhibits the activity of water molecules and thus avoids the formation of byproduct Zn_(4)ClO_(4)(OH)7·Meanwhile,highly stable Zn plating/stripping for over 1500 h,an average coulombic efficiency of>99%in long-term cycling,and ultralong storage life(the cells can work well after stored over 1 year)are simultaneously realized in the novel electrolyte.Benefitting from these aspects,the Zn-MnO_(2)batteries manifest high specific capacity of 132 mA h g^(-1),an operating voltage of 1.25 V,and a capacity retention of>98%after 1000 cycles at a current density of 200 mA g^(-1).
基金supported by the National Key R&D Program of China(2021YFC2103704)the National Natural Science Foundation of China(22022812,21978259)+1 种基金Key R&D Program of Zhejiang(2022C01208)Institute of Zhejiang University-Quzhou S&T Planed Projects(IZQ2021KJ1001)。
文摘Hydrodeoxygenation of furfural(FF)into 2-methylfuran(MF)is a significant biomass utilization route.However,designing efficient and stable non-noble metal catalyst is still a huge challenge.Herein,we reported the N,O co-doped carbon anchored with Co nanoparticles(Co-SFB)synthesized by employing the organic ligands with the target heteroatoms.Raman,electron paramagnetic resonance(EPR),electrochemical impedance spectroscopy(EIS),and X-ray photoelectron spectroscopy(XPS)characterizations showed that the co-doping of N and O heteroatoms in the carbon support endows Co-SFB with enriched lone pair electrons,fast electron transfer ability,and strong metal-support interaction.These electronic properties resulted in strong FF adsorption as well as lower apparent reaction activation energy.At last,the obtained N,O co-doped Co/C catalyst showed excellent catalytic activity(nearly 100 mol%FF conversion and 94.6 mol%MF yield)and stability for in-situ dehydrogenation of FF into MF.This N,O co-doping strategy for the synthesis of highly efficient catalytic materials with controllable electronic state will provide an excellent opportunity to better understand the structure-function relationship.
基金the University Grants Commission (UGC) for providing BSR fellowship
文摘Undoped and Ni–S co-doped mesoporous TiO2 nano materials were synthesized by using sol–gel method.The characteristic features of as prepared catalyst samples were investigated using various advanced spectroscopic and analytical techniques.The characterization results of the samples revealed that all the samples exhibited anatase phase(XRD),decreasing band gap(2.68 eV)(UV–Vis-DRS),small particle size(9.2 nm)(TEM),high surface area(142.156 m^2·g^-1)(BET),particles with spherical shape and smooth morphology(SEM);there is a frequency shift observed for co-doped sample(FT-IR)and the elemental composition electronic states and position of the doped elements(Ni and S)in the TiO2 lattice analyzed by XPS and EDX.These results supported the photocatalytic degradation of Bismarck Brown Red(BBR)achieved with in 110 min and also exhibited the antibacterial activity on Staphylococcus aureus(MTCC-3160),Pseudomonas fluorescence(MTCC-1688)under visible light irradiation.
基金supported by the National Natural Science Foundation of China(21901146,51907110,22078179)the Key Research and Development Program of Shandong Province(2019GGX103027)+2 种基金the Natural Science Foundation of Shandong Province(ZR2019MB034)the Taishan Scholar Foundation(tsqn201812063)the 111 Project(B12015)。
文摘P2-Na_(0.67)N_(i0.33)Mn_(0.67)O_(2)is considered as a promising cathode material for sodium-ion battery (SIBs)because of its high capacity and discharge potential.However,its practical use is limited by Na^(+)/vacancy ordering and P2-O2 phase transition.Herein,a Ti^(4+)/F^(-) co-doping strategy is developed to address these issues.The optimal P2-Na_(0.67)Ni_(0.33)Mn_(0.37)Ti_(0.3)O_(1.9)F_(0.1) exhibits much enhanced sodium storage performance in the high voltage range of 2.0–4.4 V,including a cycling stability of 77.2%over 300cycles at a rate of 2 C and a high-rate capability of 87.7 m Ah g^(-1) at 6 C.Moreover,the P2-Na_(0.67)Ni_(0.33)Mn_(0.37)Ti_(0.3)O_(1.9)F_(0.1) delivers reversible capacities of 82.7 and 128.1 m Ah g^(-1) at-10 and 50℃ at a rate of 2 C,respectively.The capacity retentions over 200 cycles at-10℃ is 94.2%,implying more opportunity for practical application.In-situ X-ray diffraction analysis reveals that both P2-O2 phase transitions and Na^(+)/vacancy ordering is suppressed by Ti^(4+)/F^(-) co-doping,which resulting in fast Na^(+) diffusion and stable phase structure.The hard carbon//P2-Na_(0.67)Ni_(0.33)Mn_(0.37)Ti_(0.3)O_(1.9)F_(0.1) full cell exhibits a high energy density of 310.2 Wh kg^(-1) and remarkable cyclability with 82.1%retention after 300 cycles at 1 C in the voltage range of 1.5–4.2 V.These results demonstrate that the co-doping Ti^(4+)/F^(-) is a promising strategy to improve the electrochemical properties of P2-Na_(0.67)Ni_(0.33)Mn_(0.67)O_(2),providing a facile tactic to develop high performance cathode materials for SIBs.
基金supported by the National Training Program of Innovation and Entrepreneurship for Undergraduates(No.201910389022).
文摘To clarify the contribution of oxygen vacancies to room-temperature ferromagnetism(RTFM)in cobalt doped TiO_(2)(Co-TiO_(2)),and in order to obtain the high level of magnetization suitable for spintronic devices,in this work,Co-TiO_(2) nano-particles are prepared via the sol-gel route,followed by vacuum annealing for different durations,and the influence of vacu-um annealing duration on the structure and room-temperature magnetism of the compounds is examined.The results reveal that with an increase in annealing duration,the concentration of oxygen vacancies rises steadily,while the saturation magnetiza-tion(Ms)shows an initial gradual increase,followed by a sharp decline,and even disappearance.The maximum Ms is as high as 1.19 emu/g,which is promising with respect to the development of spintronic devices.Further analysis reveals that oxygen va-cancies,modulated by annealing duration,play a critical role in tuning room-temperature magnetism.An appropriate concentra-tion of oxygen vacancies is beneficial in terms of promoting RTFM in Co-TiO_(2).However,excessive oxygen vacancies will result in a negative impact on RTFM,due to antiferromagnetic superexchange interactions originating from nearest-neighbor Co^(2+)ions.
基金supported by the National Natural Science Foundation of China[Grant no.51821004].
文摘Developing high-performance aqueous Zn-ion batteries from sustainable biomass becomes increasingly vital for large-scale energy storage in the foreseeable future.Therefore,γ-MnO_(2) uniformly loaded on N-doped carbon derived from grapefruit peel is successfully fabricated in this work,and particularly the composite cathode with carbon carrier quality percentage of 20 wt%delivers the specific capacity of 391.2 mAh g^(−1)at 0.1 A g^(−1),outstanding cyclic stability of 92.17%after 3000 cycles at 5 A g^(−1),and remarkable energy density of 553.12 Wh kg^(−1) together with superior coulombic efficiency of~100%.Additionally,the cathodic biosafety is further explored specifically through in vitro cell toxicity experiments,which verifies its tremendous potential in the application of clinical medicine.Besides,Zinc ion energy storage mechanism of the cathode is mainly discussed from the aspects of Jahn–Teller effect and Mn domains distribution combined with theoretical analysis and experimental data.Thus,a novel perspective of the conversion from biomass waste to biocompatible Mn-based cathode is successfully developed.
基金the Hong Kong Polytechnic University(Q-CDBG),the Science and Technology Program of Guangdong Province of China(2020A0505090001)the Research Grants Council of the Hong Kong Special Administrative Region,China(Project No.PolyU152178/20E)+2 种基金the National Natural Science Foundation of China(22379052)the Natural Science Foundation of Guangdong(No.2022A1515011667)China Postdoctoral Science Foundation(2021T140268).
文摘Inactive elemental doping is commonly used to improve the structural stability of high-voltage layered transition-metal oxide cathodes.However,the one-step co-doping strategy usually results in small grain size since the low diffusivity ions such as Ti^(4+)will be concentrated on grain boundaries,which hinders the grain growth.In order to synthesize large single-crystal layered oxide cathodes,considering the different diffusivities of different dopant ions,we propose a simple two-step multi-element co-doping strategy to fabricate core–shell structured LiCoO_(2)(CS-LCO).In the current work,the high-diffusivity Al^(3+)/Mg^(2+)ions occupy the core of single-crystal grain while the low diffusivity Ti^(4+)ions enrich the shell layer.The Ti^(4+)-enriched shell layer(~12 nm)with Co/Ti substitution and stronger Ti–O bond gives rise to less oxygen ligand holes.In-situ XRD demonstrates the constrained contraction of c-axis lattice parameter and mitigated structural distortion.Under a high upper cut-off voltage of 4.6 V,the single-crystal CS-LCO maintains a reversible capacity of 159.8 mAh g^(−1)with a good retention of~89%after 300 cycles,and reaches a high specific capacity of 163.8 mAh g^(−1)at 5C.The proposed strategy can be extended to other pairs of low-(Zr^(4+),Ta^(5+),and W6+,etc.)and high-diffusivity cations(Zn^(2+),Ni^(2+),and Fe^(3+),etc.)for rational design of advanced layered oxide core–shell structured cathodes for lithium-ion batteries.
文摘In this work, ZnO, Ce<sup>3+</sup> doped ZnO (ZnO/Ce<sup>3+</sup>) and Cu<sup>2+</sup> + Ce<sup>3+</sup> co-doped ZnO (ZnO/Cu<sup>2+</sup> + Ce<sup>3+</sup> ) solid solutions powders were synthesized by a solution combustion method maintaining the Ce<sup>3+</sup> ion concentration constant in 3%Wt while the Cu<sup>2+</sup> ion concentration was varied in 1, 2, 3, 10 and 20%Wt. After its synthesis, all the samples were annealed at 900?C by 24 h. The ZnO, ZnO/Ce<sup>3+</sup> and ZnO/Cu<sup>2+</sup> + Ce<sup>3+</sup> powders were structurally characterized using X-ray diffraction (XRD) technique, and the XRD patterns showed that for pure ZnO, Cu<sup>2+</sup> undoped ZnO/Ce<sup>3</sup><sup>+</sup> and ZnO/Ce<sup>3+</sup> doped with the Cu<sup>2+</sup> ion, the three samples exhibited the hexagonal wurtzite ZnO crystalline structure. However, the morphology and particle size of both samples were observed by means of a scanning electron microscopy (SEM);from SEM image, it is observed that the crystallites of both samples are agglomerated forming bigger amorphous particles with an approximate average size of 1 μm. In addition, the photoluminescence of the ZnO, Ce<sup>3+</sup> doped ZnO and Cu<sup>2+</sup> + Ce<sup>3+</sup> doped ZnO samples was measurement under an illumination of 209 nm wavelength (UV region): for the ZnO/Ce<sup>3+</sup> sample, your emission spectrum is in the visible region from blue color until red color;the UV band of the ZnO is suppressed. The multicolor emission visible is attributed to the Ce<sup>3+</sup> ion photoluminescence, while for the ZnO/Cu<sup>2+</sup> + Ce<sup>3+</sup>, its emission PL spectrum is quenching by the Cu<sup>2+</sup> ion, present in the ZnO crystalline.
基金Funded by the National Natural Science Foundation of China(No.61077074)
文摘One-dimensional, diluted magnetic semiconductor nanofibers have attracted increasing attention for their unique magnetic properties, large specific surface area, and high porosity. These qualities lead to excellent performance in magneto-optical devices, magnetic resonance imaging, ferrofluids and magnetic separation. The purpose of this study is to fabricate P-type one dimensional CuAlO2-based diluted magnetic semiconductor nanofibers. First, we fabricated CuAl0.95Co0.05O2 nanofibers with an average diameter of 1 μm with the electrospinning method. The annealed nanofibers were thermally treated at a temperature of 1 100℃ and then shrunk to a diameter of about 650 nm. We used X-ray diffraction measurements and Raman spectra to confirm that the CUAl0.95CO0.05O2 nanofihers had a single impurity free delafossite phase. The X-ray photoelectron spectroscopy analysis indicates that Co was present in the ＋2 oxidation state, resulting in an room temperature ferromagnetism in the CHAl0.95Co0.05O2 fiber. This contrststs with nonmagnetism in pristine CuAlO2 fiber. The coercivity （Hc） value of 65.26 Oe and approximate saturation magnetization （Ms） of 0.012 emu/g demonstrate good evidence of ferromagnetism at room temperature for CuAl0.95Co0.05O2 nanofibers.
