Based on the statistical data of Huixian from 1992 to 2010, we analyze the long-term and short-term relationship between Huixian's methane energy development and GDP by using co-integration test and error correcti...Based on the statistical data of Huixian from 1992 to 2010, we analyze the long-term and short-term relationship between Huixian's methane energy development and GDP by using co-integration test and error correction model. The empirical results show that there is a long-term equilibrium relationship between methane energy and GDP in the city of Huixian, and which is the one-way Granger causality of methane and GDP. In conclusion, the paper puts forward some steps about spurring economic growth, methane development and utilization in Huixian.展开更多
Thermal conductivity is one of the most significant criterion of three-dimensional carbon fiber-reinforced SiC matrix composites(3D C/SiC).Represent volume element(RVE)models of microscale,void/matrix and mesoscale pr...Thermal conductivity is one of the most significant criterion of three-dimensional carbon fiber-reinforced SiC matrix composites(3D C/SiC).Represent volume element(RVE)models of microscale,void/matrix and mesoscale proposed in this work are used to simulate the thermal conductivity behaviors of the 3D C/SiC composites.An entirely new process is introduced to weave the preform with three-dimensional orthogonal architecture.The 3D steady-state analysis step is created for assessing the thermal conductivity behaviors of the composites by applying periodic temperature boundary conditions.Three RVE models of cuboid,hexagonal and fiber random distribution are respectively developed to comparatively study the influence of fiber package pattern on the thermal conductivities at the microscale.Besides,the effect of void morphology on the thermal conductivity of the matrix is analyzed by the void/matrix models.The prediction results at the mesoscale correspond closely to the experimental values.The effect of the porosities and fiber volume fractions on the thermal conductivities is also taken into consideration.The multi-scale models mentioned in this paper can be used to predict the thermal conductivity behaviors of other composites with complex structures.展开更多
A novel dual-pressure organic Rankine cycle system(DPORC)with a dual-stage ejector(DE-DPORC)is proposed.The system incorporates a dual-stage ejector that utilizes a small amount of extraction steam from the highpressu...A novel dual-pressure organic Rankine cycle system(DPORC)with a dual-stage ejector(DE-DPORC)is proposed.The system incorporates a dual-stage ejector that utilizes a small amount of extraction steam from the highpressure expander to pressurize a large quantity of exhaust gas to performwork for the low-pressure expander.This innovative approach addresses condensing pressure limitations,reduces power consumption during pressurization,minimizes heat loss,and enhances the utilization efficiency of waste heat steam.A thermodynamic model is developed with net output work,thermal efficiency,and exergy efficiency(W_(net,ηt,ηex))as evaluation criteria,an economicmodel is established with levelized energy cost(LEC)as evaluation index,anenvironmentalmodel is created with annual equivalent carbon dioxide emission reduction(AER)as evaluation parameter.A comprehensive analysis is conducted on the impact of heat source temperature(T_(S,in)),evaporation temperature(T_(2)),entrainment ratio(E_(r1),E_(r2)),and working fluid pressure(P_(5),P_(6))on system performance.It compares the comprehensive performance of the DE-DPORC system with that of the DPORC system at TS,in of 433.15 K and T2 of 378.15 K.Furthermore,multi-objective optimization using the dragonfly algorithm is performed to determine optimal working conditions for the DE-DPORC system through the TOPSIS method.The findings indicate that the DEDPORC system exhibits a 5.34%increase inWnet andηex,a 58.06%increase inηt,a 5.61%increase in AER,and a reduction of 47.67%and 13.51%in the heat dissipation of the condenser andLEC,compared to theDPORCsystem,highlighting the advantages of this enhanced system.The optimal operating conditions are TS,in=426.74 K,T_(2)=389.37 K,E_(r1)=1.33,E_(r2)=3.17,P_(5)=0.39 MPa,P_(6)=1.32 MPa,which offer valuable technical support for engineering applications;however,they are approaching the peak thermodynamic and environmental performance while falling short of the highest economic performance.展开更多
Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely comme...Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.展开更多
This article describes a study by co-integration test and Granger causality test on the relationships between China's services trades and employment using the data of services trade from the WTO website and the em...This article describes a study by co-integration test and Granger causality test on the relationships between China's services trades and employment using the data of services trade from the WTO website and the employment data from China Statistic Yearbook for the years from 1982 to 2003. Co-integration test showed that 1% increase in export value and import value of services created respectively 0.205% and 0.068 7% more job opportunities in the service sector. Both export and import of services impacted positively on employment in service industry, and export did more than import. However, in the short run, the impacts of services export and import on employment in service industry were both very small, though positive; and the impacts of employment in service industry on both export and import of services were very big, but not stable. Granger causality test indicated that employment in service industry was a Granger cause of services export. The findings highlight the importance of facilitating services import and reducing import barriers, and suggest that the competitiveness of China's labor- intensive services trade can be exploited to boost services export and help employment in service sector, and that the structure of services trade should be optimized by shifting from labor-intensive to knowledge-and technology-intensive services thus to enhance China's competitiveness of services export.展开更多
In accordance with the economic data from Statistical Communique on National Economy and Social Development in Hubei Province in the period 1980-2009, we use co-integration analysis method to research the impact of GD...In accordance with the economic data from Statistical Communique on National Economy and Social Development in Hubei Province in the period 1980-2009, we use co-integration analysis method to research the impact of GDP growth on residents' consumer spending. Result shows that although there are differences between GDP and residents' consumer spending in the short term, the equilibrium relationship exists between them, namely, the co-integration relationship, showing consistency in trends.展开更多
By applying co-integration analysis,the Granger causality test and an error correction model,the dependency between the energy consumption and the gross domestic product of China was examined.In a further step an anal...By applying co-integration analysis,the Granger causality test and an error correction model,the dependency between the energy consumption and the gross domestic product of China was examined.In a further step an analysis was done to establish a correlation between the economic growth of different industries and China's energy consumption.An evidence-based study showed that a co-integration relationship exists between the gross energy consumption and the GDP of China and that the two variables possess bi-directional causality.The energy consumption for the secondary industry has a markedly stimulative effect to the economic growth.This paper also uses an error correction model(ECM)to explain the short-term behavior of energy demands.展开更多
The purpose of this paper is to puts forward suggestions for the sustainable development of mineral resources by combining the benefit of economy from mineral resources with the introduction of concept of circular eco...The purpose of this paper is to puts forward suggestions for the sustainable development of mineral resources by combining the benefit of economy from mineral resources with the introduction of concept of circular economic development.展开更多
Objective To study the possible relationship between the output of new products in China’s pharmaceutical industry and the investment in research and development(R&D),and to provide a theoretical basis for the de...Objective To study the possible relationship between the output of new products in China’s pharmaceutical industry and the investment in research and development(R&D),and to provide a theoretical basis for the decision-making of relevant enterprises and institutions.Methods The econometric software Stata 14 was used to perform unit root test on the relevant data.Then,a co-integration regression equation was established after stabilization,which was analyzed through co-integration test(E-G two-step method).Results and Conclusion There is a long-term equilibrium and short-term error correction relationship between the output of new products and the investment of R&D funds in China’s pharmaceutical industry.During the lagging periods from 1 to 6,R&D investment is the Granger reason for the output of new products.The investment of R&D funds has a positive effect on the output of new products and the effect is significant.Therefore,more investment should be made in R&D to enhance the output of new products.展开更多
A kind of method of modal identification subject to ambient excitation is presented. A new synthesis stationary signal based on structural response wavelet transform and wavelet coefficient processes co-integration is...A kind of method of modal identification subject to ambient excitation is presented. A new synthesis stationary signal based on structural response wavelet transform and wavelet coefficient processes co-integration is obtained. The new signal instead of structural response is used in identifying the modal parameters of a non- stationary system, combined with the method of modal identification under stationary random excitation-the NExT method and the adjusted continuous least square method. The numerical results show that the method can eliminate the non-stationarity of structural response subject to non-stationary random excitation to a great extent, and is highly precise and robust.展开更多
This paper deals with the validation and theoretical analyses of a simple method for calculating the intrinsic rate of increase, rm, of aphids and mites. This method does not require a detailed fecundity table data. T...This paper deals with the validation and theoretical analyses of a simple method for calculating the intrinsic rate of increase, rm, of aphids and mites. This method does not require a detailed fecundity table data. The value of rm can be estimated by the simple equation: rm=0.74ln (Md)/d, where d is the time from birth to first reproduction; Md is the number of female offspring produced per original female in 2d. This method was developed by Wyatt and White. We reached the following conclusions from our study: When the parameter, Md is less than 1, this equation is not appropriate for estimating rm of populations; When the parameter, Md is larger than 1 and about 70% or more of the reproductive contribution to the rm is achieved in 2d, the equation is appropriate for calculatng the rm of aphids and mites.As Md decreases, the required reproductive contribution to the rm in 2d corresponding to the constant 0.74 will increase. However, whether 70% or more of reproductive contribution to rm is achieved in 2d still is a problem for whole taxa of aphids and mites. Therefore, further siudy on reproductive distribution will be required for practical application of this method.展开更多
Although tourism marketing has made great progress in recent years,researches on it are far from enough.Current re searches on tourism marketing at home and abroad lack pertinence and mostly provide theoretical basis ...Although tourism marketing has made great progress in recent years,researches on it are far from enough.Current re searches on tourism marketing at home and abroad lack pertinence and mostly provide theoretical basis for tourism development within a wide range.The researches on tourism marketing of Penglai are few and far between.Based on previous studies and the status quo of tourism marketing strategy,the below statements tries to find out existing problems of Penglai's tourism,put for ward countermeasures and propose feasible marketing patterns suitable for its tourism development.It subsequently concludes that it can make contribution to the sustainable development of Penglai's tourism and provide other county-level tourism cities with reference for marketing tourism marketing strategies.展开更多
In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influenc...In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influences of different inner irreversible factors on entransy loss are discussed. We find that the concept of entransy loss can be used to analyze the inner irreversible thermodynamic cycles. Then, we analyze the common heat–work conversion systems with inner irreversible thermodynamic cycles. As an example, the heat–work conversion system in which the working fluid of the thermodynamic cycles is heated and cooled by streams is analyzed. Our analyses show that larger entransy loss leads to larger output work when the total heat flow from the high temperature heat source and the corresponding equivalent temperature are fixed.Some numerical cases are presented, and the results verify the theoretical analyses. On the other hand, it is also found that larger entransy loss does not always lead to larger output work when the preconditions are not satisfied.展开更多
Heat exchangers are widely used in industry, and analyses and optimizations of the performance of heat exchangers are important topics. In this paper, we define the concept of entropy resistance based on the entropy g...Heat exchangers are widely used in industry, and analyses and optimizations of the performance of heat exchangers are important topics. In this paper, we define the concept of entropy resistance based on the entropy generation analyses of a one-dimensional heat transfer process. With this concept, a two-stream parallel flow heat exchanger with viscous heating is analyzed and discussed. It is found that the minimization of entropy resistance always leads to the maximum heat transfer rate for the discussed two-stream parallel flow heat exchanger, while the minimizations of entropy generation rate, entropy generation numbers, and revised entropy generation number do not always.展开更多
The water cooled ceramic breeder(WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor(CFETR).Some updating of neutronics an...The water cooled ceramic breeder(WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor(CFETR).Some updating of neutronics analyses was needed, because there were changes in the neutronics performance of the blanket as several significant modifications and improvements have been adopted for the WCCB blanket, including the optimization of radial build-up and customized structure for each blanket module. A 22.5 degree toroidal symmetrical torus sector 3 D neutronics model containing the updated design of the WCCB blanket modules was developed for the neutronics analyses. The tritium breeding capability, nuclear heating power, radiation damage,and decay heat were calculated by the MCNP and FISPACT code. The results show that the packing factor and^6 Li enrichment of the breeder should both be no less than 0.8 to ensure tritium self-sufficiency. The nuclear heating power of the blanket under 200 MW fusion power reaches201.23 MW. The displacement per atom per full power year(FPY) of the plasma-facing component and first wall reach 0.90 and 2.60, respectively. The peak H production rate reaches150.79 appm/FPY and the peak He production reaches 29.09 appm/FPY in blanket module #3.The total decay heat of the blanket modules is 2.64 MW at 1 s after shutdown and the average decay heat density can reach 11.09 kW m^(-3) at that time. The decay heat density of the blanket modules slowly decreases to lower than 10 W m^(-3) in more than ten years.展开更多
Kanas is a National Nature Reserve and National 5A Scenic Area,and it is also high on China’s National Natural Heritage List. In this paper,with an integrated analysis and comparative geo-graphical approach,the genes...Kanas is a National Nature Reserve and National 5A Scenic Area,and it is also high on China’s National Natural Heritage List. In this paper,with an integrated analysis and comparative geo-graphical approach,the genesis and current features of the Kanas landscape are analyzed systematically according to the criteria for outstanding universal values that must be met for designation by the United Nations as World Natural Heritage. It is concluded that Kanas has outstanding universal values in geosciences,biology and aesthetics. Through comparison with other World Natural Heritage sites of the same geological types,in the same biogeographic zone and in the same latitude,it is concluded that Kanas meets criteria vii,viii,ix and x for designation as World Natural Heritage. Thus,this work establishes a scientific foundation for nomination of Kanas for such a status.展开更多
Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerica...Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement (PPC), fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.展开更多
Oral squamous cell carcinoma(OSCC) is the most prevalent and most commonly studied oral cancer. However, there is a void regarding the role that the oral microbiome may play in OSCC. Although the relationship between ...Oral squamous cell carcinoma(OSCC) is the most prevalent and most commonly studied oral cancer. However, there is a void regarding the role that the oral microbiome may play in OSCC. Although the relationship between microbial community composition and OSCC has been thoroughly investigated, microbial profiles of the human microbiome in cancer are understudied. Here we performed a small pilot study of community-wide metatranscriptome analysis to profile mRNA expression in the entire oral microbiome in OSCC to reveal molecular functions associated with this disease. Fusobacteria showed a statistically significantly higher number of transcripts at tumour sites and tumour-adjacent sites of cancer patients compared to the healthy controls analysed. Regardless of the community composition, specific metabolic signatures were consistently found in disease. Activities such as iron ion transport, tryptophanase activity, peptidase activities and superoxide dismutase were over-represented in tumour and tumour-adjacent samples when compared to the healthy controls. The expression of putative virulence factors in the oral communities associated with OSCC showed that activities related to capsule biosynthesis, flagellum synthesis and assembly, chemotaxis, iron transport, haemolysins and adhesins were upregulated at tumour sites. Moreover, activities associated with protection against reactive nitrogen intermediates, chemotaxis, flagellar and capsule biosynthesis were also upregulated in non-tumour sites of cancer patients. Although they are preliminary, our results further suggest that Fusobacteria may be the leading phylogenetic group responsible for the increase in expression of virulence factors in the oral microbiome of OSCC patients.展开更多
Ultrasonic welding is an effective ways to achieve a non-reactive/immiscible heterogeneous metal connection, such as the connection of magnesium alloy and titanium alloy. But the thermal mechanism of magnesium alloy/t...Ultrasonic welding is an effective ways to achieve a non-reactive/immiscible heterogeneous metal connection, such as the connection of magnesium alloy and titanium alloy. But the thermal mechanism of magnesium alloy/titanium alloy ultrasonic welding has not been defined clearly. In this paper, the experimental and the finite element analysis were adopted to study the thermal mechanism during welding. Through the test, the temperature variation law during the welding process is obtained, and the accuracy of the finite element model is verified. The microscopic analysis indicates that at the welding time of 0.5 s, the magnesium alloy in the center of the solder joint is partially melted and generates the liquid phase. Through the finite element analysis, the friction coefficient of the magnesium–titanium ultrasonic welding interface can be considered as an average constant value of 0.28. The maximum temperature at the interface can exceed 600 ℃ to reach the melting point temperature of the magnesium alloy. The plastic deformation begins after 0.35 s and occurs at the magnesium side at the center of the interface.展开更多
In this paper,based on the generalized heat transfer law,an air conditioning system is analyzed with the entropy generation minimization and the entransy theory.Taking the coefficient of performance(denoted as COP) ...In this paper,based on the generalized heat transfer law,an air conditioning system is analyzed with the entropy generation minimization and the entransy theory.Taking the coefficient of performance(denoted as COP) and heat flow rate Qout which is released into the room as the optimization objectives,we discuss the applicabilities of the entropy generation minimization and entransy theory to the optimizations.Five numerical cases are presented.Combining the numerical results and theoretical analyses,we can conclude that the optimization applicabilities of the two theories are conditional.If Qout is the optimization objective,larger entransy increase rate always leads to larger Qout,while smaller entropy generation rate does not.If we take COP as the optimization objective,neither the entropy generation minimization nor the concept of entransy increase is always applicable.Furthermore,we find that the concept of entransy dissipation is not applicable for the discussed cases.展开更多
文摘Based on the statistical data of Huixian from 1992 to 2010, we analyze the long-term and short-term relationship between Huixian's methane energy development and GDP by using co-integration test and error correction model. The empirical results show that there is a long-term equilibrium relationship between methane energy and GDP in the city of Huixian, and which is the one-way Granger causality of methane and GDP. In conclusion, the paper puts forward some steps about spurring economic growth, methane development and utilization in Huixian.
基金Supported by Science Center for Gas Turbine Project of China (Grant No.P2022-B-IV-014-001)Frontier Leading Technology Basic Research Special Project of Jiangsu Province of China (Grant No.BK20212007)the BIT Research and Innovation Promoting Project of China (Grant No.2022YCXZ019)。
文摘Thermal conductivity is one of the most significant criterion of three-dimensional carbon fiber-reinforced SiC matrix composites(3D C/SiC).Represent volume element(RVE)models of microscale,void/matrix and mesoscale proposed in this work are used to simulate the thermal conductivity behaviors of the 3D C/SiC composites.An entirely new process is introduced to weave the preform with three-dimensional orthogonal architecture.The 3D steady-state analysis step is created for assessing the thermal conductivity behaviors of the composites by applying periodic temperature boundary conditions.Three RVE models of cuboid,hexagonal and fiber random distribution are respectively developed to comparatively study the influence of fiber package pattern on the thermal conductivities at the microscale.Besides,the effect of void morphology on the thermal conductivity of the matrix is analyzed by the void/matrix models.The prediction results at the mesoscale correspond closely to the experimental values.The effect of the porosities and fiber volume fractions on the thermal conductivities is also taken into consideration.The multi-scale models mentioned in this paper can be used to predict the thermal conductivity behaviors of other composites with complex structures.
基金supported by the Foundation of Liaoning Provincial Key Laboratory of Energy Storage and Utilization(Grant Nos.CNWK202304 and CNNK202315)the Introduction of TalentResearch Start-Up Funding Projects ofYingkou Institute of Technology(Grant No.YJRC202107).
文摘A novel dual-pressure organic Rankine cycle system(DPORC)with a dual-stage ejector(DE-DPORC)is proposed.The system incorporates a dual-stage ejector that utilizes a small amount of extraction steam from the highpressure expander to pressurize a large quantity of exhaust gas to performwork for the low-pressure expander.This innovative approach addresses condensing pressure limitations,reduces power consumption during pressurization,minimizes heat loss,and enhances the utilization efficiency of waste heat steam.A thermodynamic model is developed with net output work,thermal efficiency,and exergy efficiency(W_(net,ηt,ηex))as evaluation criteria,an economicmodel is established with levelized energy cost(LEC)as evaluation index,anenvironmentalmodel is created with annual equivalent carbon dioxide emission reduction(AER)as evaluation parameter.A comprehensive analysis is conducted on the impact of heat source temperature(T_(S,in)),evaporation temperature(T_(2)),entrainment ratio(E_(r1),E_(r2)),and working fluid pressure(P_(5),P_(6))on system performance.It compares the comprehensive performance of the DE-DPORC system with that of the DPORC system at TS,in of 433.15 K and T2 of 378.15 K.Furthermore,multi-objective optimization using the dragonfly algorithm is performed to determine optimal working conditions for the DE-DPORC system through the TOPSIS method.The findings indicate that the DEDPORC system exhibits a 5.34%increase inWnet andηex,a 58.06%increase inηt,a 5.61%increase in AER,and a reduction of 47.67%and 13.51%in the heat dissipation of the condenser andLEC,compared to theDPORCsystem,highlighting the advantages of this enhanced system.The optimal operating conditions are TS,in=426.74 K,T_(2)=389.37 K,E_(r1)=1.33,E_(r2)=3.17,P_(5)=0.39 MPa,P_(6)=1.32 MPa,which offer valuable technical support for engineering applications;however,they are approaching the peak thermodynamic and environmental performance while falling short of the highest economic performance.
基金This work was supported by the National Natural Science Foundation of China(52203066,51973157,61904123)the Tianjin Natural Science Foundation(18JCQNJC02900)+3 种基金the National innovation and entrepreneurship training program for college students(202310058007)the Tianjin Municipal college students’innovation and entrepreneurship training program(202310058088)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(Grant No.2018KJ196)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University.
文摘Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.
文摘This article describes a study by co-integration test and Granger causality test on the relationships between China's services trades and employment using the data of services trade from the WTO website and the employment data from China Statistic Yearbook for the years from 1982 to 2003. Co-integration test showed that 1% increase in export value and import value of services created respectively 0.205% and 0.068 7% more job opportunities in the service sector. Both export and import of services impacted positively on employment in service industry, and export did more than import. However, in the short run, the impacts of services export and import on employment in service industry were both very small, though positive; and the impacts of employment in service industry on both export and import of services were very big, but not stable. Granger causality test indicated that employment in service industry was a Granger cause of services export. The findings highlight the importance of facilitating services import and reducing import barriers, and suggest that the competitiveness of China's labor- intensive services trade can be exploited to boost services export and help employment in service sector, and that the structure of services trade should be optimized by shifting from labor-intensive to knowledge-and technology-intensive services thus to enhance China's competitiveness of services export.
基金Supported by National Natural Science Foundation (60873021/F0201)
文摘In accordance with the economic data from Statistical Communique on National Economy and Social Development in Hubei Province in the period 1980-2009, we use co-integration analysis method to research the impact of GDP growth on residents' consumer spending. Result shows that although there are differences between GDP and residents' consumer spending in the short term, the equilibrium relationship exists between them, namely, the co-integration relationship, showing consistency in trends.
基金Projects TSFZLXKF2006-3 supported by the China Lixin Risk Management Research Institute Foundation of Shanghai Municipal Education Commission90210035 by the National Natural Science Foundation of China
文摘By applying co-integration analysis,the Granger causality test and an error correction model,the dependency between the energy consumption and the gross domestic product of China was examined.In a further step an analysis was done to establish a correlation between the economic growth of different industries and China's energy consumption.An evidence-based study showed that a co-integration relationship exists between the gross energy consumption and the GDP of China and that the two variables possess bi-directional causality.The energy consumption for the secondary industry has a markedly stimulative effect to the economic growth.This paper also uses an error correction model(ECM)to explain the short-term behavior of energy demands.
文摘The purpose of this paper is to puts forward suggestions for the sustainable development of mineral resources by combining the benefit of economy from mineral resources with the introduction of concept of circular economic development.
基金Research on Innovation and Development Strategy of Pharmaceutical Industry in Liaoning Province(2020lslktyb-095).
文摘Objective To study the possible relationship between the output of new products in China’s pharmaceutical industry and the investment in research and development(R&D),and to provide a theoretical basis for the decision-making of relevant enterprises and institutions.Methods The econometric software Stata 14 was used to perform unit root test on the relevant data.Then,a co-integration regression equation was established after stabilization,which was analyzed through co-integration test(E-G two-step method).Results and Conclusion There is a long-term equilibrium and short-term error correction relationship between the output of new products and the investment of R&D funds in China’s pharmaceutical industry.During the lagging periods from 1 to 6,R&D investment is the Granger reason for the output of new products.The investment of R&D funds has a positive effect on the output of new products and the effect is significant.Therefore,more investment should be made in R&D to enhance the output of new products.
基金The National Natural Science Foundation of China(No50278017)
文摘A kind of method of modal identification subject to ambient excitation is presented. A new synthesis stationary signal based on structural response wavelet transform and wavelet coefficient processes co-integration is obtained. The new signal instead of structural response is used in identifying the modal parameters of a non- stationary system, combined with the method of modal identification under stationary random excitation-the NExT method and the adjusted continuous least square method. The numerical results show that the method can eliminate the non-stationarity of structural response subject to non-stationary random excitation to a great extent, and is highly precise and robust.
文摘This paper deals with the validation and theoretical analyses of a simple method for calculating the intrinsic rate of increase, rm, of aphids and mites. This method does not require a detailed fecundity table data. The value of rm can be estimated by the simple equation: rm=0.74ln (Md)/d, where d is the time from birth to first reproduction; Md is the number of female offspring produced per original female in 2d. This method was developed by Wyatt and White. We reached the following conclusions from our study: When the parameter, Md is less than 1, this equation is not appropriate for estimating rm of populations; When the parameter, Md is larger than 1 and about 70% or more of the reproductive contribution to the rm is achieved in 2d, the equation is appropriate for calculatng the rm of aphids and mites.As Md decreases, the required reproductive contribution to the rm in 2d corresponding to the constant 0.74 will increase. However, whether 70% or more of reproductive contribution to rm is achieved in 2d still is a problem for whole taxa of aphids and mites. Therefore, further siudy on reproductive distribution will be required for practical application of this method.
文摘Although tourism marketing has made great progress in recent years,researches on it are far from enough.Current re searches on tourism marketing at home and abroad lack pertinence and mostly provide theoretical basis for tourism development within a wide range.The researches on tourism marketing of Penglai are few and far between.Based on previous studies and the status quo of tourism marketing strategy,the below statements tries to find out existing problems of Penglai's tourism,put for ward countermeasures and propose feasible marketing patterns suitable for its tourism development.It subsequently concludes that it can make contribution to the sustainable development of Penglai's tourism and provide other county-level tourism cities with reference for marketing tourism marketing strategies.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51376101 and 51356001)
文摘In this paper, we try to use the entransy theory to analyze the heat–work conversion systems with inner irreversible thermodynamic cycles. First, the inner irreversible thermodynamic cycles are analyzed. The influences of different inner irreversible factors on entransy loss are discussed. We find that the concept of entransy loss can be used to analyze the inner irreversible thermodynamic cycles. Then, we analyze the common heat–work conversion systems with inner irreversible thermodynamic cycles. As an example, the heat–work conversion system in which the working fluid of the thermodynamic cycles is heated and cooled by streams is analyzed. Our analyses show that larger entransy loss leads to larger output work when the total heat flow from the high temperature heat source and the corresponding equivalent temperature are fixed.Some numerical cases are presented, and the results verify the theoretical analyses. On the other hand, it is also found that larger entransy loss does not always lead to larger output work when the preconditions are not satisfied.
基金supported by the National Natural Science Foundation of China(Grant No.51106082)the Tsinghua University Initiative Scientific Research Program
文摘Heat exchangers are widely used in industry, and analyses and optimizations of the performance of heat exchangers are important topics. In this paper, we define the concept of entropy resistance based on the entropy generation analyses of a one-dimensional heat transfer process. With this concept, a two-stream parallel flow heat exchanger with viscous heating is analyzed and discussed. It is found that the minimization of entropy resistance always leads to the maximum heat transfer rate for the discussed two-stream parallel flow heat exchanger, while the minimizations of entropy generation rate, entropy generation numbers, and revised entropy generation number do not always.
基金supported by the National Special Project for Magnetic Confined Nuclear Fusion Energy(Grant Nos 2013GB108004,2014GB119000,and 2015BG108002)
文摘The water cooled ceramic breeder(WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor(CFETR).Some updating of neutronics analyses was needed, because there were changes in the neutronics performance of the blanket as several significant modifications and improvements have been adopted for the WCCB blanket, including the optimization of radial build-up and customized structure for each blanket module. A 22.5 degree toroidal symmetrical torus sector 3 D neutronics model containing the updated design of the WCCB blanket modules was developed for the neutronics analyses. The tritium breeding capability, nuclear heating power, radiation damage,and decay heat were calculated by the MCNP and FISPACT code. The results show that the packing factor and^6 Li enrichment of the breeder should both be no less than 0.8 to ensure tritium self-sufficiency. The nuclear heating power of the blanket under 200 MW fusion power reaches201.23 MW. The displacement per atom per full power year(FPY) of the plasma-facing component and first wall reach 0.90 and 2.60, respectively. The peak H production rate reaches150.79 appm/FPY and the peak He production reaches 29.09 appm/FPY in blanket module #3.The total decay heat of the blanket modules is 2.64 MW at 1 s after shutdown and the average decay heat density can reach 11.09 kW m^(-3) at that time. The decay heat density of the blanket modules slowly decreases to lower than 10 W m^(-3) in more than ten years.
基金funded by the Project of Science and Tech-nology Plan of Xinjiang Uygur Autonomous Region (200933128)the National Natural Science Foundation of China (40671057)the Chinese Academy of Sciences Visiting Professorship for Senior International Scientists (2009S1-35)
文摘Kanas is a National Nature Reserve and National 5A Scenic Area,and it is also high on China’s National Natural Heritage List. In this paper,with an integrated analysis and comparative geo-graphical approach,the genesis and current features of the Kanas landscape are analyzed systematically according to the criteria for outstanding universal values that must be met for designation by the United Nations as World Natural Heritage. It is concluded that Kanas has outstanding universal values in geosciences,biology and aesthetics. Through comparison with other World Natural Heritage sites of the same geological types,in the same biogeographic zone and in the same latitude,it is concluded that Kanas meets criteria vii,viii,ix and x for designation as World Natural Heritage. Thus,this work establishes a scientific foundation for nomination of Kanas for such a status.
基金sponsored by Iran’s National Elites Foundation (INEF)
文摘Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement (PPC), fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.
基金supported by the Evans Center for Interdisciplinary Biomedical Research ARC on ‘Oral microbiome in AhR activation and oral cancer development and progression’ at Boston University (http://www.bumc.bu.edu/evanscenteribr/)the Forsyth Institute pilot grant programme
文摘Oral squamous cell carcinoma(OSCC) is the most prevalent and most commonly studied oral cancer. However, there is a void regarding the role that the oral microbiome may play in OSCC. Although the relationship between microbial community composition and OSCC has been thoroughly investigated, microbial profiles of the human microbiome in cancer are understudied. Here we performed a small pilot study of community-wide metatranscriptome analysis to profile mRNA expression in the entire oral microbiome in OSCC to reveal molecular functions associated with this disease. Fusobacteria showed a statistically significantly higher number of transcripts at tumour sites and tumour-adjacent sites of cancer patients compared to the healthy controls analysed. Regardless of the community composition, specific metabolic signatures were consistently found in disease. Activities such as iron ion transport, tryptophanase activity, peptidase activities and superoxide dismutase were over-represented in tumour and tumour-adjacent samples when compared to the healthy controls. The expression of putative virulence factors in the oral communities associated with OSCC showed that activities related to capsule biosynthesis, flagellum synthesis and assembly, chemotaxis, iron transport, haemolysins and adhesins were upregulated at tumour sites. Moreover, activities associated with protection against reactive nitrogen intermediates, chemotaxis, flagellar and capsule biosynthesis were also upregulated in non-tumour sites of cancer patients. Although they are preliminary, our results further suggest that Fusobacteria may be the leading phylogenetic group responsible for the increase in expression of virulence factors in the oral microbiome of OSCC patients.
基金Supported by National Natural Science Foundation of China(Grant Nos.U1764251,51775160)Fundamental Research Funds for the Central Universities of China(Grant No.DUT19LAB24)
文摘Ultrasonic welding is an effective ways to achieve a non-reactive/immiscible heterogeneous metal connection, such as the connection of magnesium alloy and titanium alloy. But the thermal mechanism of magnesium alloy/titanium alloy ultrasonic welding has not been defined clearly. In this paper, the experimental and the finite element analysis were adopted to study the thermal mechanism during welding. Through the test, the temperature variation law during the welding process is obtained, and the accuracy of the finite element model is verified. The microscopic analysis indicates that at the welding time of 0.5 s, the magnesium alloy in the center of the solder joint is partially melted and generates the liquid phase. Through the finite element analysis, the friction coefficient of the magnesium–titanium ultrasonic welding interface can be considered as an average constant value of 0.28. The maximum temperature at the interface can exceed 600 ℃ to reach the melting point temperature of the magnesium alloy. The plastic deformation begins after 0.35 s and occurs at the magnesium side at the center of the interface.
基金Project supported by the Youth Programs of Chongqing Three Gorges University,China(Grant No.13QN18)
文摘In this paper,based on the generalized heat transfer law,an air conditioning system is analyzed with the entropy generation minimization and the entransy theory.Taking the coefficient of performance(denoted as COP) and heat flow rate Qout which is released into the room as the optimization objectives,we discuss the applicabilities of the entropy generation minimization and entransy theory to the optimizations.Five numerical cases are presented.Combining the numerical results and theoretical analyses,we can conclude that the optimization applicabilities of the two theories are conditional.If Qout is the optimization objective,larger entransy increase rate always leads to larger Qout,while smaller entropy generation rate does not.If we take COP as the optimization objective,neither the entropy generation minimization nor the concept of entransy increase is always applicable.Furthermore,we find that the concept of entransy dissipation is not applicable for the discussed cases.