High piezoelectric composite films composed of poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)and ferromagnetic cobalt ferrite(CoFe_(2)O_(4))(0.00 wt%to 0.2 wt%)are prepared by a solution casting method acc...High piezoelectric composite films composed of poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)and ferromagnetic cobalt ferrite(CoFe_(2)O_(4))(0.00 wt%to 0.2 wt%)are prepared by a solution casting method accompanied by uniaxial stretching and high electric field poling.The decisive effect of the poling electric field on the power generating capability was confirmed by the experiments.For pure PVDF-HFP films,when the maximum electric field Emax is 120 MV/m,the calibrated open circuit voltage reaches 2.93 V,which is much higher than those poled at lower electric fields(70 MV/m:1.41 V;90 MV/m:2.11 V).Furthermore,the addition of CoFe_(2)O_(4)also influences the piezoelectricity dramatically.In the samples containing 0.15 wt%CoFe_(2)O_(4),the calibrated open circuit voltage increases to the maximum value of 3.57 V.Meanwhile,the relative fraction of theβ-phase and the crystallinity degree are 99%and 48%,respectively.The effects of CoFe_(2)O_(4)nanoparticles on initial crystallization,uniaxial stretching and high electric field poling are investigated by XRD,FTIR and DSC.展开更多
CoFe_(2)O_(4)has been widely used for electromagnetic wave absorption owing to its high Snoek limit,high anisotropy,and suitable saturation magnetization;however,its inherent shortcomings,including low dielectric loss...CoFe_(2)O_(4)has been widely used for electromagnetic wave absorption owing to its high Snoek limit,high anisotropy,and suitable saturation magnetization;however,its inherent shortcomings,including low dielectric loss,high density,and magnetic agglomeration,limit its application as an ideal absorbent.This study investigated a microstructure regulation strategy to mitigate the inherent disadvantages of pristine CoFe_(2)O_(4)synthesized via a sol–gel auto-combustion method.A series of CoFe_(2)O_(4)foams(S0.5,S1.0,and S1.5,corresponding to foams with citric acid(CA)-to-Fe(NO_(3))_(3)·9H_(2)O molar ratios of 0.5,1.0,and 1.5,respectively)with two-dimensional(2D)curved surfaces were obtained through the adjustment of CA-to-Fe^(3+)ratio,and the electromagnetic parameters were adjusted through morphology regulation.Owing to the appropriate impedance matching and conductance loss provided by moderate complex permittivity,the effective absorption bandwidth(EAB)of S0.5 was as high as 7.3 GHz,exceeding those of most CoFe_(2)O_(4)-based absorbents.Moreover,the EAB of S1.5 reached 5.0 GHz(8.9–13.9 GHz),covering most of the X band,owing to the intense polarization provided by lattice defects and the heterogeneous interface.The three-dimensional(3D)foam structure circumvented the high density and magnetic agglomeration issues of CoFe_(2)O_(4)nanoparticles,and the good conductivity of 2D curved surfaces could effectively elevate the complex permittivity to ameliorate the dielectric loss of pure CoFe_(2)O_(4).This study provides a novel idea for the theoretical design and practical production of lightweight and broadband pure ferrites.展开更多
基金Natural Science Foundation of Anhui Province(1908085ME127)Research Foundation of the Institute of Environmentfriendly Materials and Occupational Health(Wuhu),Anhui University of Science and Technology(ALW2021YF11)。
基金supported by National Natural Science Foundation of China(No.51703015)Fundamental Research Funds for the Central Universities(No.2020CDJQY-A008).
文摘High piezoelectric composite films composed of poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)and ferromagnetic cobalt ferrite(CoFe_(2)O_(4))(0.00 wt%to 0.2 wt%)are prepared by a solution casting method accompanied by uniaxial stretching and high electric field poling.The decisive effect of the poling electric field on the power generating capability was confirmed by the experiments.For pure PVDF-HFP films,when the maximum electric field Emax is 120 MV/m,the calibrated open circuit voltage reaches 2.93 V,which is much higher than those poled at lower electric fields(70 MV/m:1.41 V;90 MV/m:2.11 V).Furthermore,the addition of CoFe_(2)O_(4)also influences the piezoelectricity dramatically.In the samples containing 0.15 wt%CoFe_(2)O_(4),the calibrated open circuit voltage increases to the maximum value of 3.57 V.Meanwhile,the relative fraction of theβ-phase and the crystallinity degree are 99%and 48%,respectively.The effects of CoFe_(2)O_(4)nanoparticles on initial crystallization,uniaxial stretching and high electric field poling are investigated by XRD,FTIR and DSC.
基金supported by the National Natural Science Foundation of China (Nos.22004106 and 51872238)。
文摘CoFe_(2)O_(4)has been widely used for electromagnetic wave absorption owing to its high Snoek limit,high anisotropy,and suitable saturation magnetization;however,its inherent shortcomings,including low dielectric loss,high density,and magnetic agglomeration,limit its application as an ideal absorbent.This study investigated a microstructure regulation strategy to mitigate the inherent disadvantages of pristine CoFe_(2)O_(4)synthesized via a sol–gel auto-combustion method.A series of CoFe_(2)O_(4)foams(S0.5,S1.0,and S1.5,corresponding to foams with citric acid(CA)-to-Fe(NO_(3))_(3)·9H_(2)O molar ratios of 0.5,1.0,and 1.5,respectively)with two-dimensional(2D)curved surfaces were obtained through the adjustment of CA-to-Fe^(3+)ratio,and the electromagnetic parameters were adjusted through morphology regulation.Owing to the appropriate impedance matching and conductance loss provided by moderate complex permittivity,the effective absorption bandwidth(EAB)of S0.5 was as high as 7.3 GHz,exceeding those of most CoFe_(2)O_(4)-based absorbents.Moreover,the EAB of S1.5 reached 5.0 GHz(8.9–13.9 GHz),covering most of the X band,owing to the intense polarization provided by lattice defects and the heterogeneous interface.The three-dimensional(3D)foam structure circumvented the high density and magnetic agglomeration issues of CoFe_(2)O_(4)nanoparticles,and the good conductivity of 2D curved surfaces could effectively elevate the complex permittivity to ameliorate the dielectric loss of pure CoFe_(2)O_(4).This study provides a novel idea for the theoretical design and practical production of lightweight and broadband pure ferrites.
