Phase equilibrium of CaSO_4Ca(OH)_2-H_2O system

In order to provide the theoretical guidance for applying the neutralization method to treatment of heavy metals wastewater with high concentration of sulfate, and to better understand the mechanism of calcium sulfate scale formation, the equilibrium solubility data of CaSOa-Ca（OH）2-H2O system at 298.15 K were theoretically calculated via the Pitzer semi-empirical ion-interaction theory, and determined experimentally by the optical method combining with X-ray diffractometry, and the calculated and determined phase diagrams of CaSOa-Ca（OH）2-H2O system were plotted and compared. Physical definition of each area was studied, and the physical law of characteristic point and line was explained in detail. Adjusting the pH value of neutralization-hydrolysis solution depended on the SO4z- concentration in the system. And interaction characteristics between the solubilities of CaSO4（s）and Ca（OH）2（s）were found out.

Preparation of TiO_2/ITO film by liquid phase deposition and its photoelectrocatalytic activity for degradation of 4-aminoantipyrine

A thin layer of TiO2 film was deposited on ITO surface via the liquid phase deposition （LPD） process. The photocurrent and electrochemical impedance spectroscopy （EIS） measurements indicated that the as-prepared LPD TiO2/ITO film had an excellent photoelectrochemical performance, which showed a sensitive and rapid response to the UV irradiation. The photogenerated electron-hole pairs could be effectively separated by applying an external bias to the TiO2 film electrode. The LPD TiO2/ITO film was employed to study the photoelectrocatalytic （PEC） degradation of 4-aminoantipyrine. Compared with other techniques, the PEC technique based on such a LPD film electrode had a synergetic effect for 4-aminoantipyrine degradation. When the applied bias potential was＋0.8 V and the supporting electrolyte concentration of Na2SO4 was 0.1 mol/L, the highest degradation efficiency within 120 min could reach 95%for 0.1 mmol/L 4-aminoantipyrine solution at pH 2.0.

渤中地区EWR–Phase4随钻测井异常响应特征

结合井眼环境下随钻测井电磁场数值模拟计算的研究结果,分析了中浅电阻率和相位移深中浅电阻率这两大类随钻电阻率曲线异常变化的主要特征和产生的原因。并以中海油渤中地区哈里伯顿公司EWR–Phase 4随钻测井仪器所测量的这两类电阻率曲线为例进行详细阐述。选取了3口典型井的随钻幅度衰减和相位移电阻率曲线,通过对地层岩性、渗透性、泥浆侵入,机械钻速、井眼环境等几个因素的分析,特别是对极浅、浅、中和深电阻率曲线的变化范围和变化趋势等曲线特征进行了分析。研究认为,电阻率曲线异常主要表现为佐罗效应、"窗帘花边"效应和极化角突变等几种主要类型,而引起这种异常变化的原因既有井眼或地层倾斜的影响,也有薄互层、非均质性、螺纹井眼以及钻铤侧向震动等诸多方面的影响。

泄浊通络方治疗慢性肾脏病3-4期临床研究

目的:观察泄浊通络方治疗慢性肾脏病3-4期的疗效及对患者生活质量的影响。方法:选取100例慢性肾脏病3-4期患者,按随机数字表法分为试验组及对照组各50例。2组均给予基础治疗,试验组给予泄浊通络方,对照组给予安慰剂,2组疗程均为12周。比较2组临床疗效及中医证候疗效,比较2组治疗前后实验室相关指标值[丙氨酸氨基转移酶(ALT)、天门冬氨酸氨基转移酶(AST)、血清钾(K+)、血肌酐(SCr)、血清胱抑素C(CysC)、尿素氮(BUN)、尿微量白蛋白/尿肌酐(ACR)、尿蛋白定量、估算肾小球过滤率(eGFR)]、生活质量评分[生理健康(PCS)、心理健康(MCS)、肾病负担(KDB)、肾病影响(KDE)、症状影响(DRS)]的变化。结果:试验组临床疗效总有效率为80.0%,对照组为60.9%,2组比较,差异有统计学意义(P<0.05)。试验组中医证候疗效总有效率为88.9%,对照组为78.3%,2组比较,差异有统计学意义(P<0.05)。治疗后,2组BUN、SCr、CysC、ACR、尿蛋白定量指标值均较治疗前下降(P<0.05),试验组BUN、SCr、CysC、ACR、尿蛋白定量指标值均低于对照组(P<0.05)。治疗后,2组eGFR指标值均较治疗前升高(P<0.05),试验组eGFR指标值高于对照组(P<0.05)。治疗后,试验组PCS、MCS、KDB、KDE、DRS评分均较治疗前升高(P<0.05),且上述5项评分均高于对照组(P<0.05)。结论:泄浊通络方治疗慢性肾脏病3-4期效果较好,可改善肾功能,提高生活质量。

从废旧电池中回收二水磷酸铁再生LiFePO_(4)/C

使用酸浸—加热回流法从废旧磷酸铁锂电池中回收得到二水磷酸铁,将其作为原料并添加一定量的锂源和碳源,通过高温固相法再生了LiFePO_(4)/C,并研究了温度对再生LiFePO_(4)/C电化学性能的影响。首先采用酸浸—加热回流法对废旧磷酸铁锂正极片进行处理生成FePO_(4)·2H_(2)O,洗涤烘干后研磨得到FePO_(4)·2H_(2)O粉末,XRD表征和ICP测试结果显示回收得到的FePO_(4)·2H_(2)O结构完整、纯度较高。然后在FePO_(4)·2H_(2)O粉末中添加碳源,在高温下制备LiFePO_(4)/C材料,对其进行结构与形貌表征以及电化学测试,发现以葡萄糖为碳源、温度为700℃、葡萄糖量为理论生成磷酸铁锂质量的17%时再生的LiFePO_(4)/C电化学性能最佳,0.3 C倍率下再生的LiFePO_(4)/C首周放电比容量可达141.8 mAh/g,循环100周后容量保持率可维持在94.3%。通过与商用LiFePO_(4)/C进行电化学性能对比,进一步验证了该工艺再生的LiFePO_(4)/C有着优良的电化学性能。

The effect of temperature on phase equilibria of polyethylene glycol(PEG8000)-K_(2)SO_(4)-H_(2)O at T=(288.15,298.15,308.15)K

The phase behavior of potassium sulfate(K_(2)SO_(4))in polyethylene glycol with molecular weight 8000(PEG8000)andwater(H_(2)O)mixed solvent at 288.15,298.15,and 308.15 Kwere determined.According to the results,when the temperature are 288.15 and 298.15 K,there is only a solid-liquid phase equilibrium relationship in the system,and the phase diagrams are both divided into three parts which respectively are the regions of unsaturated homogeneous liquid(L),one liquid and one solid K_(2)SO_(4)(L+S)and one liquid and twosolids K_(2)SO_(4) and PEG8000(L+2S).The solubility of K_(2)SO_(4) in PEG8000-H_(2)O mixed solvent decreased with the addition of the PEG8000 in the solution.Comparing the diagrams of 288.15 and 298.15 K,the sizes of regions of(L)and(L+S)increased and that of(L+2S)decreased with the increase of temperature.While at 308.15 K,solid-liquid and liquid-liquid equilibrium coexist,and there are six parts in the complete phase diagram at 308.15 K,adding the areas of one liquid and one solid K_(2)SO_(4)(L+S),two liquids(2 L),two liquids and one solid K_(2)SO_(4)(2 L+S).The equations developed by Merchuk,Hu,and Jayapalwere used to fit the binodal curves data of the systemat 308.15 K,meanwhile,the experimental tie-line data of the system at 308.15 K were correlated by Othmer-Tobias equation and Bancroft equation.

A 4-channel 3 Tesla phased array receive coil for awake rhesus monkey fMRI and diffusion MRI experiments

Awake monkey fMRI and diffusion MRI combined with conventional neuroscience techniques has the potential to study the structural and functional neural network. The majority of monkey fMRI and diffusion MRI experiments are performed with single coils which suffer from severe EPI distortions which limit resolution. By constructing phased array coils for monkey MRI studies, gains in SNR and anatomical accuracy (i.e., reduction of EPI distortions) can be achieved using parallel imaging. The major challenges associated with constructing phased array coils for monkeys are the variation in head size and space constraints. Here, we apply phased array technology to a 4-channel phased array coil capable of improving the resolution and image quality of full brain awake monkey fMRI and diffusion MRI experiments. The phased array coil is that can adapt to different rhesus monkey head sizes (ages 4-8) and fits in the limited space provided by monkey stereotactic equipment and provides SNR gains in primary visual cortex and anatomical accuracy in conjunction with parallel imaging and improves resolution in fMRI experiments by a factor of 2 (1.25 mm to 1.0 mm isotropic) and diffusion MRI experiments by a factor of 4 (1.5 mm to 0.9 mm isotropic).

Phase change materials as quenching media for heat treatment of 42CrMo4 steels

In the present work,paraffin phase change material is used as quenchant for the heat treatment of 42CrMo4 alloy and compared with water,air,and CuO doped paraffin.The samples were prepared based on ASTM E 8M-98 standard for tensile test and then heated up to 830°C,kept for 4 h in an electric resistance furnace and then quenched in the mentioned media.Elastic modulus,yield strength,ultimate tensile strength,elongation,and modulus of toughness were determined according to the obtained stress?strain curves.Moreover,the hardness and microstructural evolution were investigated after the heat treatment at different media.The samples quenched in paraffin and CuO-doped paraffin are higher in ultimate tensile strength(1439 and 1306 MPa,respectively)than those quenched in water(1190 MPa)and air(1010 MPa).The highest hardness,with a value of HV 552,belonged to the sample quenched in CuO-doped paraffin.The microstructural studies revealed that the non-tempered steel had a ferrite/pearlite microstructure,while by quenching in water,paraffin and CuO-doped paraffin,ferrite/martensite microstructures were achieved.It is also observed that using the air as quenchant resulted in a three-phase bainite/martensite/ferrite microstructure.

Phase Equilibrium and Phase Diagram of the Ternary System（MgCl2 + MgB2O4 + H2O） at 288 and 298 K

1 Introduction The brines with high concentrations of magnesium and boron resources are widely distributed in the Qaidam Basin of the Qinghai-Tibet plateau,China(Zheng&Tang,1988).Although some works on the ternary system

Effect of metallic phase species on the corrosion resistance of 17M/(10NiO-NiFe_2O_4) cermet inert anode of aluminum electrolysis

NiFe2O4-based cermet inert anodes with metallic phase compositions of Cu, Ni and 85Cu15Ni were prepared by cold pressing-sintering. Their corrosion resistance was also investigated in Na3 AIF6-Al2O3 melts. The resuits show that the metallic phase species in cermets have no effect on the concentration of impurities in bath during electrolysis, the total steady-state concentration of impurities is almost the same, i.e. between 4.12 × 10^-4- 4.80 × 10^-4. There exists metal preferential corrosion for the cermet inert anode with metal Ni as metallic phase. For NiFe2 O4-based cermets, the cermet with metal Cu as metallic phase exhibits better corrosion resistance than the others.

Dynamic phase transition behavior of a LiMn_(0.5)Fe_(0.5)PO_(4) olivine cathode material for lithium-ion batteries revealed through in-situ X-ray techniques

LiMn_(0.5)Fe_(0.5)PO_(4) has attracted great interest due to its good electrochemical performance and higher operating voltages.This has led to a greater than 30 percent higher energy density than for commercial Li Fe PO4 olivine cathodes.Understanding the phase transition behaviors and kinetics of this material will help researchers to design and develop next generation cathodes for Li-ion batteries.In this study,we investigated non-equilibrium phase transition behaviors in a LiMn_(0.5)Fe_(0.5)PO_(4) cathode material during charge–discharge processes by varying current rates(C-rates)using synchrotron in-situ X-ray techniques.These methods included wide angle X-ray scattering(in-situ WAXS)and X-ray absorption spectroscopy(in-situ XAS).The WAXS spectra indicate that the phase transition of LiMn_(0.5)Fe_(0.5)PO_(4) material at slow C-rates is induced by a two-phase reaction.In contrast,at a high C-rate(5 C),the formation of an intermediate phase upon discharge is clearly observed.Concurrently,the oxidation numbers of the redox reactions of Fe^(2+)/Fe^(3+)and Mn^(2+)/Mn^(3+)were evaluated using in-situ XAS.This combination of synchrotron in-situ X-ray techniques gives clear insights into the non-equilibrium phase transition behavior of a LiMn_(0.5)Fe_(0.5)PO_(4) cathode material.This new understanding will be useful for further developments of this highly promising cathode material for practical commercialization.

Thermodynamic modeling and phase diagram prediction of salt lake brine systemsⅡ.Aqueous Li^(+)-Na^(+)-K^(+)-SO_(4)^(2-) and its subsystems

It is still a challenging task to accurately and temperature-continuously express the thermodynamic properties and phase equilibrium behaviors of the salt-lake brine with multi-component,multitemperature and high concentration.The essential subsystem of sulfate type brine,aqueous Li^(+)-Na^(+)-K^(+)-SO_(4)^(2-) and its subsystems across a temperature range from 250 K to 643 K are investigated with the improved comprehensive thermodynamic model.Liquid parameters(Δg_(IJ),Δh_(IJ),and ΔC_(p,IJ))associated with the contributions of Gibbs energy,enthalpy,and heat capacity to the binary interaction parameters,i.e.the temperature coefficients of eNRTL parameters formulated with a Gibbs Helmholtz expression,are determined via multi-objective optimization method.The solid constantsΔ_(f)G_(k)°^((298.15))andΔ_(f)H_(k)°^((298.15))of11 solid species occurred in the quaternary system are rebuilt from multi-temperature solubilities.The modeling results show the accurate representation of(1)solution properties and binary phase diagram at temperature ranges from eutectic points to 643 K;(2)isothermal phase diagrams for Li_(2)SO_(4)-Na_(2)SO_(4)-H_(2)O,Li_(2)SO_(4)-K_(2)SO_(4)-H_(2)O and Na_(2)SO_(4)-K_(2)SO_(4)-H_(2)O ternary systems.The predicted results of complete structure and polythermal phase diagram of ternary systems and the isothermal phase diagrams of quaternary system excellently match with the experimental data.

Room-temperature solid phase surface engineering of BiOI sheets stacking g-C_(3)N_(4) boosts photocatalytic reduction of Cr(Ⅵ)

Cr(Ⅵ)-based compounds pollution have attracted global concern due to serious harm to humans and environment.Hence,it is crucial to exploit an effective technique to eliminate Cr(Ⅵ)in water.Herein,we in-situ grown BiOI on graphitic carbon nitride to prepare the BiOI/g-C_(3)N_(4)(BCN)direct Z-scheme heterojunction by solid phase engineering method at room temperature.Experimental result shown the photocatalytic activity of pure BiOI were obviously enhanced by constructing Z-scheme BCN heterostructure,and BCN-3 heterostructure exhibited the optimal photocatalytic degradation of RhB with 98%yield for 2.5 h and reduction of Cr(Ⅵ)with more than 99%yield for 1.5 h at pH=2.Stability test shows BCN-3 still kept more than 98%reduction efficiency after 6 cycles.In addition,we also studied the reduction mechanism that shown the.O_(2)^(-)radicals essentially helped to reduce the Cr(Ⅵ)in aqueous solution under illumination,verified the direct Z-scheme charge transfer path by X-ray photoelectron spectroscopy(XPS)and the free radical trapping experiment.The work open a new way for rationally designing photocatalyst heterostructure to reduce Cr(Ⅵ)to Cr(Ⅲ).

First principles study on electronic structure and optical properties of novel Na-hP4 high pressure phase

The electronic structure and optical properties of novel Na-hP4 high pressure phase at different pressures(260,320,400 and 600 GPa)were investigated by the density functional theory(DFT)with the generalized gradient approximation(GGA)for the exchange and correlation energy.The band structure along the higher symmetry axes in the Brillouin zone,the density of states(DOS) and the partial density of states(PDOS)were presented.The band gap increases and the energy band expands to some extent with the pressure increasing.The dielectric function,reflectivity,energy-loss function,optical absorption coefficient,optical conductivity, refractive index and extinction coefficient were calculated for discussing the optical properties of Na-hP4 high pressure phase at different pressures.

Compression behavior and phase transition of β-Si_3N_4 under high pressure

The compressibility and pressure-induced phase transition of β-Si3N4 were investigated by using an angle dispersive x-ray diffraction technique in a diamond anvil cell at room temperature. Rietveld refinements of the x-ray powder diffraction data verified that the hexagonal structure（with space group P63/m, Z = 2 formulas per unit cell） β-Si3N4 remained stable under high pressure up to 37 GPa. Upon increasing pressure, β-Si3 N4 transformed to δ-Si3N4 at about 41 GPa. The initial β-Si3N4 was recovered as the pressure was released to ambient pressure, implying that the observed pressureinduced phase transformation was reversible. The pressure–volume data of β-Si3N4 was fitted by the third-order Birch–Murnaghan equation of state, which yielded a bulk modulus K0= 273（2） GPa with its pressure derivative K0= 4（fixed）and K0= 278（2） GPa with K 0= 5. Furthermore, the compressibility of the unit cell axes（a and c-axes） for the β-Si3N4 demonstrated an anisotropic property with increasing pressure.

Measurement and Correlation of Equilibrium Data for Aqueous Two-phase System Ethanol+Water+ K_2HPO_4

The isothermal solubility data of aqueous two-phase system ethanol+water+K 2HPO 4 were determined with the turbidity titration method at 303.2 K. The binodal curves were described by using the Mistry equation very well. An experimental procedure for measuring the liquid-liquid equilibrium data of the aqueous two-phase system was proposed, in which the concentrations of the coexisting phases were determined with the corresponding densities of the solution. The tie lines were satisfactorily described by using the Othmer-Tobias and Bancroft equations.

Detection of Tetracycline Antibiotics in Water by Dispersive Micro-solid Phase Extraction using Fe_(3)O_(4)@[Cu_(3)(btc)_(2)]Magnetic Composite Combined with Liquid Chromatography-Tandem Mass Spectrometry

Residues of tetracycline antibiotics(TCs) in environments may be harmful to human.Due to their high polarities,it is extremely challenging to efficiently enrich TCs with low concentrations in natural waters for analysis.In this work,a magnetic metal-organic framework Fe_(3)O_(4)@[Cu_(3)(btc)_(2)]was synthesized and applied as a dispersive micro-solid phase extraction adsorbent for TCs enrichment.Effects of dispersive micro-solid phase extraction conditions including extraction time,solution p H,and elution solvent on the extraction efficiencies of TCs were investigated.Results show that TCs could be enriched efficiently by Fe_(3)O_(4)@[Cu_(3)(btc)_(2)],and electrostatic interaction between TCs and Fe_(3)O_(4)@[Cu_(3)(btc)_(2)]dominated this process.Combined with liquid chromatography-tandem mass spectrometry,four TCs residues (oxytetracycline,tetracycline,chlortetracycline,and doxycycline) in natural waters were determined.The detection limits (LOD,S/N=3) of the four antibiotics were 0.01-0.02μg/L,and the limits of quantitation (LOQ,S/N=10)were 0.04-0.07μg/L.The recoveries obtained from river water and aquaculture water spiked with three TCs concentration levels ranged from 70.3%to 96.5%with relative standard deviations of 3.8%-12.8%.Results indicate that the magnetic metal-organic framework based dispersive micro-solid phase extraction is simple,rapid and high-loading for antibiotics enrichment from water,which further expand the practical application of metal-organic frameworks in sample pretreatment for environmental pollutant analysis.

Nonlinear Phase Noise Estimate Based on Electronic Orthogonal Coherent for 112 Gb/s PDM-4QAM System

In this paper, we proposed a novel method of joint phase noise estimate (JPNE) for PDM-M-QAM (M = 4, 16, 32, 64, …) transmission systems, and established the theoretical model to illustrate the operation mechanism. The simulation of laser phase noise and fiber nonlinearity compensation based on the proposed JPNE method had also been demonstrated. For 112 Gb/s PDM-4QAM transmission system, the simulation results had showed that the optimum launch power increased from -4 dBm to at least 0 dBm compared with the condition of no phase noise compensation in reach of all simulation distances.

Alkylations of Resorcarenes and Calix[4]pyrroles in Phase Transfer Catalytic Systems

Resorcarens 1a-b (R'=Ph, p-MeOC6H4) were fully alkylated with alkyl iodides or bromides in TEBA/KOH/DMF solid-liquid PTC process with 63-82% yields, whereas the three calix[4]pyrroles 3a-b (2R= 2Me, (CH2)(4), (CH2)(5)) were alkylated with alkyl iodides in TBAB/ 50%NaOH/ CH2Cl2 liquid-liquid PTC system with lower yields (10-38%).

Enantioseparation of Racemic Naproxen Esters on Cellulose Tris (4-methylbenzoate) Chiral Stationary Phase

Several kinds of racemic naproxen ester were successfully separated on CTMB chiral stationary phase with hexane-ethanol (98:2, vol./vol.) as the mobile phase. The influence of mobile phase composition and structure of racemic naproxen ester on chiral separation was studied and the chiral recognition mechanism of CTMB was discussed.