Study of the features of outburst caused by rock cross-cut coal uncovering and the law of gas dilatation energy release

To study the law of gas dilatation energy release of rock cross-cut coal uncovering face, according to the analysis of the physical parameters distribution features of coal and rock mass in front of crosscut face,the equations of elastic potential of coal and gas dilatation energy theory were set up to process a contrast calculation of the sizes of two kinds of energy. The results show that gas dilatation energy is the uppermost energy source causing outburst occurrence. Furthermore, the mathematical model of spherical flow field gas dilatation energy release was established and MATLAB software was applied to make a numerical calculation analysis on the law of gas dilatation energy release. The results indicate that the gas dilatation energy is closely related to gas parameters and its energy index does reflect the possibility of coal seam outburst.

A comparison of the energy consumption and carbon emissions for different modes of transportation in open-cut coal mines

Transportation accounts for 80% of open-cut coal mine carbon emissions. With regard to the energy con- sumption and carbon emissions of transportation within an open-cut mine, this paper systematically compared the work and energy consumption of a truck and belt conveyor on a theoretical basis, and con- structed a model to calculate the energy consumption of open-cut mine transportation. Life cycle carbon emission factors and power consumption calculation model were established through a Process Analysis- Life Cycle Analysis （PA-LCA）. The following results were obtained： （1） the energy consumption of truck transportation was four to twelve times higher than that of the belt conveyor; （2） the C02 emissions from truck transportation were three to ten times higher than those of the belt conveyor; （3） with the increase in the slope angle for transportation, the ratio of truck to belt conveyor for both energy consumption and carbon emissions gradually decreased; （4） based on 2013 prices in China, the energy cost of transportation using a belt conveyor in open-cut coal mines could save 0.6-2.4 Yuan/（t kin） compared to truck transportation.

Fractal characteristics of surface crack evolution in the process of gas-containing coal extrusion

In this paper, simulated experiment device of coal and gas outburst was employed to perform the experiment on gas-containing coal extrusion. In the experiment, coal surface cracks were observed with a high-speed camera and then the images were processed by sketch. Based on the above description, the paper studied the fractal dimension values from different positions of coal surface as well as their changing laws with time. The results show that there is a growing parabola trend of crack dimension value in the process of coal extrusion. Accordingly, we drew the conclusion that extruded coal crack evolution is a process of fractal dimension value increase. On the basis of fractal dimension values taken from different parts of coal masses, a fractal dimension of the contour map was drawn. Thus, it is clear that the contour map involves different crack fractal dimension values from different positions. To be specific, where there are complicated force and violent movement in coal mass, there are higher fractal dimension values, i.e., the further the middle of observation surface is from the exit of coal mass, and the lower the fractal dimension value is. In line with fractal geometry and energy theory of coal and gas outburst, this study presents the relation between fractal dimension and energy in the process of extruding. In conclusion, the evolution of crack fractal dimension value can signify that of energy, which has laid a solid foundation for the quantification research on the mechanism of gas-containing coal extrusion.

Performance of water-based foams affected by chemical inhibitors to retard spontaneous combustion of coal

The micelle generating process of the sodium dodecyl sulfate(SDS) solution with the addition of chemical inhibitors was elucidated using phase separation model, and the descending order of the capacity for the selected chemical inhibitors to reduce the critical micelle concentrations of the solution are Mg Cl_2, Ca Cl_2,NH_4HCO_3 and NH_4Cl. The data to quantitatively describe the foam decay process, including foaming ratio,foam life and decay behaviors, was obtained by pressure measuring system. The results indicate that chemical inhibitors can improve the solution foamability. The capacity of the inhibitors to enhance the solution foamability is sorted as NH_4 Cl, NH_4HCO_3, Mg Cl2 and Ca Cl_2 which can distinctly improve the foam stability as well. The capacity of the inhibitors to enhance the SDS foam stability can be arranged as Mg Cl_2, NH_4 Cl, NH_4HCO_3 and Ca Cl_2. It is observed that the gravity drainage plays a leading role in the increase of proportion of diffusion drainage. The oxidation dynamic parameters of the coal samples treated by inhibition foams were investigated using thermal analysis technique, and their synergistic effects on inhibiting coal oxidation were explored.

Clean Coal Technology and Market in China

This paper briefs the current clean production and consumption levels of coal in China and the pollution harmbrought to the atmospheric environment, present status and orientation of clean coal technology development in Chinacoal industry, progress and perspective of clean coal power generation technology in China, as well as application andmarket of flue gas desulphurization technology in coal-fired power plants.[

Dispatch of a Coal Mine-Integrated Energy System:Optimization Model with Interval Variables and Lower Carbon Emission

In the coal mining process,a large amount of Coal Mine-Associated energy(CMAE),such as coal mine methane and underground wastewater,is produced.Research on the modeling and optimization dispatching of a Coal Mine-Integrated Energy System(CMIES)with CMAE effectively saves energy and reduces carbon pollution.CMAE has great uncertainties owing to the affections of the hydrogeology conditions and mining schedules.In addition,thermal loads have high comfort requirements in mines,which brings great challenges to the optimization dispatching of CMIESs.Therefore,this paper studies the architecture and solution of CMIESs with a flexible thermal load and source-load uncertainty.First,to effectively improve the electric and thermal conversion efficiency,the architecture of CMIES,including a concentrating solar power station,is built.Second,for the scheduling model with bilateral uncertainty,the interval representation method with interval variables is proposed,and a multi-objective scheduling model based on the interval variables and flexible thermal load is constructed.Finally,we propose a solution method for the model with interval variables.A case study is conducted to demonstrate the performance of our model and method for lowering carbon emissions and cost.