Investigating Load Regulation Characteristics of a Wind-PV-Coal Storage Multi-Power Generation System

There is a growing need to explore the potential of coal-fired power plants(CFPPs)to enhance the utilization rate of wind power(wind)and photovoltaic power(PV)in the green energy field.This study developed a load regulation model for a multi-power generation system comprising wind,PV,and coal energy storage using realworld data.The power supply process was divided into eight fundamental load regulation scenarios,elucidating the influence of each scenario on load regulation.Within the framework of the multi-power generation system with the wind(50 MW)and PV(50 MW)alongside a CFPP(330 MW),a lithium-iron phosphate energy storage system(LIPBESS)was integrated to improve the system’s load regulation flexibility.The energy storage operation strategy was formulated based on the charging and discharging priority of the LIPBESS for each basic scenario and the charging and discharging load calculation method of LIPBESS auxiliary regulation.Through optimization using the particle swarm algorithm,the optimal capacity of LIPBESS was determined to be within the 5.24-4.88 MWh range.From an economic perspective,the LIPBESS operating with CFPP as the regulating power source was 49.1% lower in capacity compared to the renewable energy-based storage mode.

Research on solar aided coal-fired power generation system and performance analysis

Integrating solar power utilization systems with coal-fired power units, the solar aided coal-fired power generation (SACPG) shows a significant prospect for the large-scale utilization of solar energy and energy saving of thermal power units. The methods and mechanism of system integration were studied. The parabolic trough solar collectors were used to collect solar energy and the integration scheme of SACPG system was determined considering the matching of working fluid flows and energy flows. The thermodynamic characteristics of solar thermal power generation and their effects on the performance of thermal power units were studied, and based on this the integration and optimization model of system structure and parameters were built up. The integration rules and coupling mecha- nism of SACPG systems were summarized in accordance with simulation results. The economic analysis of this SACPG system showed that the solar LEC of a typical SACPG system, considering CO2 avoidance, is 0.098 $/kW·h, lower than that of SEGS, 0.14 $/kW·h.

Combining solar power with coal-fired power plants,or cofiring natural gas

Coal-fired power operators continue to look for ways to increase the efficiency and extend the working lives of their plants by improving operational flexibility and reducing environmental impact.Two possible options are explored here:combining solar energy with coal-fired power generation,and cofiring natural gas in coal-fired plants.Both techniques show potential.Depending on the individual circumstances,both can increase the flexibility of a power plant whilst reducing its emissions.In some cases,plant costs could also be reduced.Clearly,any solar-based system is limited geographically to locations that receive consistently high levels of solar radiation.Similarly,although many coal-fired plants already burn limited amounts of gas alongside their coal feed,for cofiring at a significant level,a reliable,affordable supply of natural gas is needed.This is not the case everywhere.But for each technology,there are niche and mainstream locations where the criteria can be met.The need for good solar radiation means that the uptake of coal-solar hybrids will be limited.Cofiring natural gas has wider potential:currently,the largest near-term market appears to be for application to existing coal-fired plants in the USA.However,where gas is available and affordable,potential markets also exist in some other countries.

Energy recovery and abatement potential of CO_2 emissions for an integrated iron and steel making enterprise

The typical features for an integrated iron & steelmaking industry are high energy consumption and CO2 emission.The traditional BF-BOF process in an integrated Iron and steelmaking enterprise produces a large amount of residual heat and energy,which has great potential for recovery and abatement potential of CO2 emissions.In this paper,for an integrated Iron & steelmaking enterprise of 10 million tons per year in capacity,the residual heat and energy recovery analysis was conducted.It is indicateded that the residual heat and energy can be recovered as electric power by using present advanced process technology.By means of the distributed power generation,the residual heat and energy can be recovered,with a power generation capacity of 419.5 kWh per ton steel product.Accordingly,the abatement potential of CO2 emissions for an integrated iron & steel making enterprise was also evaluated,which indicated that about 398.5 kg CO2 could be reduced per ton steel product.