期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
低波长漂移的电吸收调制DFB激光器 被引量:1
1
作者 刘国利 王圩 +4 位作者 汪孝杰 张佰君 陈娓兮 张静媛 朱洪亮 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2001年第5期636-640,共5页
采用端面有效反射率法 ,从理论上计算了单片集成电吸收调制 DFB激光器 (Electroabsorption ModulatedDFB L aser,EML)的腔面反射率、耦合强度 (κL)对其波长漂移的影响 .同时在实验中通过改变腔面的反射率来验证计算结果 .理论与实验的... 采用端面有效反射率法 ,从理论上计算了单片集成电吸收调制 DFB激光器 (Electroabsorption ModulatedDFB L aser,EML)的腔面反射率、耦合强度 (κL)对其波长漂移的影响 .同时在实验中通过改变腔面的反射率来验证计算结果 .理论与实验的结果表明 :为提高 EML 的模式稳定性 ,必须减小调制器一端的反射率 ,同时增加DFB激光器的 κL.最终我们采用选择区域生长 (Selective Area Growth,SAG)的方法 ,制作了低光反馈出光面的单脊条形 EML,在 2 .5 Gb/ s的非归零 (NRZ)码调制下 ,经过 2 80 km的标准光纤传输后 ,没有发现色散代价 . 展开更多
关键词 dfb激光器 电吸收调制器 低波长漂移
下载PDF
光学薄膜技术改善分布反馈(DFB)激光器的光谱特性 被引量:1
2
作者 毕可奎 朱洪亮 汪孝杰 《光学仪器》 1999年第4期229-233,共5页
报导了利用镀光学薄膜的方法来改变镀层厚度,可以有效地将原来处于双模工作的1.3μm DFB激光器变为单模工作。模式改变起主导作用的是加镀膜层影响到激光器端面反射特性中的相移。实验表明,镀膜技术可望成为改善DFB激光器... 报导了利用镀光学薄膜的方法来改变镀层厚度,可以有效地将原来处于双模工作的1.3μm DFB激光器变为单模工作。模式改变起主导作用的是加镀膜层影响到激光器端面反射特性中的相移。实验表明,镀膜技术可望成为改善DFB激光器单模工作的一种辅助方法。实验结果有助于理解相移对激射特性的作用。 展开更多
关键词 光学薄膜 dfb激光器 单模 光谱特性 激光器
下载PDF
Midinfrared optical frequency comb based on difference frequency generation using high repetition rate Er-doped fiber laser with single wall carbon nanotube film 被引量:3
3
作者 M.Tsuzuki L.Jin +9 位作者 M.Yamanaka V.Sonnenchein H.Tomita A.Sato T.Ohara Y.Sakakibara E.Omoda H.Kataura T.Iguchi N.Nishizawa 《Photonics Research》 SCIE EI 2016年第6期313-317,共5页
We demonstrated stable midinfrared(MIR) optical frequency comb at the 3.0 μm region with difference frequency generation pumped by a high power, Er-doped, ultrashort pulse fiber laser system. A soliton mode-locked161... We demonstrated stable midinfrared(MIR) optical frequency comb at the 3.0 μm region with difference frequency generation pumped by a high power, Er-doped, ultrashort pulse fiber laser system. A soliton mode-locked161 MHz high repetition rate fiber laser using a single wall carbon nanotube was fabricated. The output pulse was amplified in an Er-doped single mode fiber amplifier, and a 1.1–2.2 μm wideband supercontinuum(SC) with an average power of 205 m W was generated in highly nonlinear fiber. The spectrogram of the generated SC was examined both experimentally and numerically. The generated SC was focused into a nonlinear crystal, and stable generation of MIR comb around the 3 μm wavelength region was realized. 展开更多
关键词 high Midinfrared optical frequency comb based on difference frequency generation using high repetition rate Er-doped fiber laser with single wall carbon nanotube film MIR SWNT PCF rate mode DSF EDF length SC DFG
原文传递
Amplified spontaneous emission properties of a single mode Er^(3+)-doped tellurite fiber
4
作者 张军杰 戴世勋 +3 位作者 徐时清 汪国年 张丽艳 胡丽丽 《Chinese Optics Letters》 SCIE EI CAS CSCD 2004年第9期543-545,共3页
Spectral characteristics of the amplified spontaneous emission (ASE) from a novel single mode Er^(3+) doped tellurite fiber with D-type cladding is reported in this letter. When pumped at 980 nm, an ASE source that ha... Spectral characteristics of the amplified spontaneous emission (ASE) from a novel single mode Er^(3+) doped tellurite fiber with D-type cladding is reported in this letter. When pumped at 980 nm, an ASE source that has nearly a 100-nm flat FWHM bandwidth is obtained with a fiber length of 30-60 cm. Variation of ASE spectra with pump powers and fiber lengths are measured. Output power up to 2.0 mW is obtained with a launched pump power of 660 mW. 展开更多
关键词 Cladding (coating) ERBIUM optically pumped lasers single mode fibers Spontaneous emission Tellurium compounds
原文传递
All-fiber cascaded ytterbium-doped nanosecond pulsed amplifier 被引量:1
5
作者 周洁 闫平 +2 位作者 殷树鹏 王东生 巩马理 《Chinese Optics Letters》 SCIE EI CAS CSCD 2010年第5期457-459,共3页
A cascaded ytterbium-doped all-fiber master oscillator power amplifier(MOPA) with 1064-nm pulsed laser is demonstrated,and it can produce up to 20-W average power and 0.1-mJ pulse energy at tunable repetition rates ... A cascaded ytterbium-doped all-fiber master oscillator power amplifier(MOPA) with 1064-nm pulsed laser is demonstrated,and it can produce up to 20-W average power and 0.1-mJ pulse energy at tunable repetition rates from 10 to 200 kHz.Two main difficulties of the all-fiber configuration are overcome:all fiber isolator and mode field adapter between single mode fiber(SMF) and double cladding fiber(DCF). Gain saturation and nonlinear effect are analyzed theoretically,and the possibility of further power-scaling of this cascade scheme is predicted. 展开更多
关键词 Cladding (coating) Fiber lasers optical phase conjugation Power amplifiers Pulse repetition rate Pulsed laser applications Pulsed lasers single mode fibers YTTERBIUM
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部