Comparative research on three types of coaxial slow wave structures

This paper studies three types of coaxial slow wave structures （SWSs）： （1） with ripples on both the inner and outer conductors; （2） with ripples on the outer conductor and smooth on the inner one; and （3） with ripples on the inner conductor and smooth on the outer one. The frequencies, coupling impedances, time growth rates and beam-wave interaction efficiencies of the three types of coaxial SWSs are obtained by theoretical analysis. Moreover, the relativistic Ccrenkov generators （RCGs） with the three types of coaxial SWSs are simulated with a fully electromagnetic particle- in-cell code, and the results verify the theoretical analysis. It is proved that the RCG with double-rippled coaxial SWS has the highest conversion efficiency and the shortest starting time.

Continuous Fabrication of Ti_(3)C_(2)T_x MXene-Based Braided Coaxial Zinc-Ion Hybrid Supercapacitors with Improved Performance

Zinc-ion hybrid fiber supercapacitors(FSCs)are promising energy storages for wearable electronics owing to their high energy density,good flexibility,and weavability.However,it is still a critical challenge to optimize the structure of the designed FSC to improve energy density and realize the continuous fabrication of super-long FSCs.Herein,we propose a braided coaxial zinc-ion hybrid FSC with several meters of Ti_(3)C_(2)T_x MXene cathode as core electrodes,and shell zinc fiber anode was braided on the surface of the Ti_(3)C_(2)T_x MXene fibers across the solid electrolytes.According to the simulated results using ANSYS Maxwell software,the braided structures revealed a higher capacitance compared to the spring-like structures.The resulting FSCs exhibited a high areal capacitance of 214 mF cm^(-2),the energy density of 42.8μWh cm^(-2)at 5 mV s^(-1),and excellent cycling stability with 83.58%capacity retention after 5000 cycles.The coaxial FSC was tied several kinds of knots,proving a shape-controllable fiber energy storage.Furthermore,the knitted FSC showed superior stability and weavability,which can be woven into watch belts or embedded into textiles to power smart watches and LED arrays for a few days.

Coupling effect of the conductivities of Li ions and electrons by introducing LLTO@C fibers in the LiNi0.8Co0.15Al0.05O2 cathode

To probe the coupling effect of the electron and Li ion conductivities in Ni-rich layered materials(LiNi0.8Co0.15Al0.05O2,NCA),lithium lanthanum titanate(LLTO)nanofiber and carbon-coated LLTO fiber(LLTO@C)materials were introduced to polyvinylidene difluoride in a cathode.The enhancement of the conductivity was indicated by the suppressed impedance and polarization.At 1 and 5 C,the cathodes with coupling conductive paths had a more stable cycling performance.The coupling mechanism was analyzed based on the chemical state and structure evolution of NCA after cycling for 200 cycles at 5 C.In the pristine cathode,the propagation of lattice damaged regions,which consist of high-density edge-dislocation walls,destroyed the bulk integrity of NCA.In addition,the formation of a rock-salt phase on the surface of NCA caused a capacity loss.In contrast,in the LLTO@C modified cathode,although the formation of dislocation-driven atomic lattice broken regions and cation mixing occurred,they were limited to a scale of several atoms,which retarded the generation of the rock-salt phase and resulted in a pre-eminent capacity retention.Only NiO phase“pitting”occurred.A mechanism based on the synergistic transport of Li ions and electrons was proposed.

Coaxial fiber organic electrochemical transistor with high transconductance

Fiber organic electrochemical transistors(OECTs)have received extensive attention in wearable and implantable biosensors because of their high flexibility and low working voltage.However,the transconductance of fiber OECTs is much lower compared with the planar counterparts,leading to low sensitivity.Here,we developed fiber OECTs in a coaxial configuration with microscale channel length to achieve the highest transconductance of 135 mS,which is one to two orders of magnitude higher than that of the state-of-the-art fiber OECTs.Coaxial fiber OECT based sensors showed high sensitivities of 12.78,20.53 and 3.78 mA/decade to ascorbic acid,hydrogen peroxide and glucose,respectively.These fiber OECTs were woven into a fabric to monitor the glucose in sweat during exercise and implanted in mouse brain to detect ascorbic acid.This coaxial architectural design offers an effective way to promote the performance of fiber OECTs and realize highly sensitive detection of biochemicals.

Enhanced zinc storage performance of mixed valent manganese oxide for flexible coaxial fiber zinc-ion battery by limited reduction control

While manganese-based cathodes have been intensively studied for zinc-ion batteries(ZIBs),the limited rate capability and cycle life have always been a difficult problem to be solved.Here,we report a mixed valent manganese oxide(MnOx)cathode with superior electrochemical performance,which exhibits a high specific capacity of 450 mA h/g at 0.2 C and a satisfactory specific capacity of 158.3 mA h/g at a high rate of 5 C.The mixed cathode system reduces the charge transfer resistance,and show good surface stability and adsorption properties,so it is beneficial for the storage of Zn^(2+).Meanwhile,coaxial fiber ZIBs(CFZIBs)with splendid flexibility are assembled utilizing the elaborately prepared cathode material.The CFZIBs achieve a reversible capacity of 255.8 m A h/g and the capacity retention rate is as high as 80%after 1000 bending deformations.This study provides new opportunities for designing ZIBs with high performance and high flexibility.

Si_(3)N_(4)nanowires@pyrolytic carbon nanolayers coupled withhydroxyapatite nanosheets as reinforcement for carbon matrixcomposites with boosting mechanical and friction properties

Extensive attention has been drawn to the development of carbon-matrix composites for application in the aerospace and military industry,where a combination of high mechanical strength and excellent frictional properties are required.Herein,carbon-matrix composites reinforced by Si_(3)N_(4)nanowires@pyrolytic carbon nanolayers(Si_(3)N_(4nws)@PyCnls)coupled with hydroxyapatite nanosheets is reported.The Si_(3)N_(4nws)@PyCnls(SP)with coaxial structure could increase the surface roughness of Si_(3)N_(4nws)and promote the stress transfer to the carbon matrix,whereas the porous hydroxyapatite nanosheets favor the infiltration of the carbon matrix and promote the interfacial bonding between the SP and carbon matrix.The carbon matrix composites reinforced by SP coupled with hydroxyapatite nanosheets(Si_(3)N_(4nws)@PyCnls-HA-C)exhibit excellent mechanical strength.Compare with the conventional Si_(3)N_(4nws)reinforced carbon composites,Si_(3)N_(4nws)@PyCnls-HA-C(SPHC)have 162%and 249%improvement in flexural strength and elastic modulus,respectively.Moreover,the friction coefficient and wear rate decreased by 53%and 23%,respectively.This study provides a co-reinforcement strategy generated by SP coupled with hydroxyapatite nanosheets for effective improvement of mechanical and frictional properties of carbon matrix composites that are used for aerospace and military industry applications.