Polypyrrole Chitosan Cobalt Ferrite Nanoparticles Composite Layer for Measuring the Low Concentration of Fluorene Using Surface Plasmon Resonance

Fluorene is a polycyclic aromatic hydrocarbon, which is a hazardous toxic chemical in the environment. The measurement of low concentrations of fluorene is a subject of intense interest in chemistry and in the environment. Polypyrrole chitosan cobalt ferrite nanoparticles are prepared using the electrochemical method. The prepared layers are characterized using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive spectroscopy. The layers are used to detect fluorene using the surface plasmon resonance technique at room temperature. The composite layer is evaluated after detection of fluorene using atomic force microscopy. The fluorene is bound on the layer, and the shift of the resonance angle is about 0.0052°, corresponding to the limitation of 0.01 ppm.

Synthesis and characterization of carbon-coated cobalt ferrite nanoparticles

Cobalt ferrite nanoparticles（CFNPs） were prepared via a reverse micelle method. The CFNPs were subsequently coated with carbon shells by means of thermal chemical vapor deposition（TCVD）. In this process, acetylene gas（C2H2） was used as a carbon source and the coating was carried out for 1, 2, or 3 h at 750℃. The Ar/C2H2 ratio was 10：1. Heating during the TCVD process resulted in a NP core size that approached 30 nm; the thickness of the shell was less than 10 nm. The composition, structure, and morphology of the fabricated composites were characterized using X-ray diffraction, simultaneous thermal analysis, transmission electron microscopy, high-resolution transmission electron microscopy, and selected-area diffraction. A vibrating sample magnetometer was used to survey the samples＇ magnetic properties. The deposited carbon shell substantially affected the growth and magnetic properties of the CFNPs. Micro-Raman spectroscopy was used to study the carbon coating and revealed that the deposited carbon comprised graphite, multiwalled carbon nanotubes, and diamond-like carbon. With an increase in coating time, the intensity ratio between the amorphous and ordered peaks in the Raman spectra decreased, which indicated an increase in crystallite size.

Antibacterial properties of copper-substituted cobalt ferrite nanoparticles synthesized by co-precipitation method

Controlled growth and careful characterization of cobalt ferrite nanoparticles for antibacterial applica- tions are challenging. Copper-substituted cobalt ferrite nanoparticles （CuxCo1-xFe2O4）, where x = 0.0, 0.3, 0.5, 0.7 and 1.0, were synthesized using an economical and simple co-precipitation technique. The crys- tal structure and antibacterial properties of the samples as a function of Cu-substituted content were systematically studied. With increasing Cu concentration, the nanopartide size decreased from ~30 to ~20 nm. The Fourier transform infra-red spectra exhibit two prominent fundamental absorption bands, at ~595 and 419 cm^-1. These bands correspond to intrinsic stretching vibrations of metals at tetrahedral and octahedral sites, respectively. The Raman scattering results reveal that increasing the Cu content enhances the local disorder at both tetrahedral and octahedral sub lattices. The results indicate that the substitution of Co with Cu in cobalt ferrite nanoparticles strongly influences the microstructure, crystal structure, and oarticle diameter, and also improves the antibacterial properties.

Influence of particle size and temperature on the dielectric properties of CoFe_2O_4 nanoparticles

The objective of this study was to establish the dielectric properties of CoFe2O4 nanoparticles with particle sizes that varied from 28.6 to 5.8 nm. CoFe2O4 nanoparticles were synthesized using a chemical coprecipitation method. The particle sizes were calculated accord-ing to the Scherrer formula using X-ray diffraction （XRD） peaks, and the particle size distribution curves were constructed by using field-emission scanning electron microscopy （FESEM） images. The dielectric permittivity and loss tangents of the samples were determined in the frequency range of 1 kHz to 1 MHz and in the temperature range of 300 to 10 K. Both the dielectric permittivity and the loss tangent were found to decrease with increasing frequency and decreasing temperature. For the smallest CoFe2O4 nanoparticle size, the dielectric per-mittivity and loss tangent exhibited their highest and lowest values, respectively. This behavior is very useful for materials used in devices that operate in the microwave or radio frequency ranges.

Theory, simulation and experiment of optical properties of cobalt ferrite(CoFe2O4) nanoparticles

Optical properties of cobalt ferrite(CoFe2O4) nanoparticles are modeled and simulated employing finite element analysis(FEA) and density functional theory(DFT) for different particle sizes. The simulated absorption maxima of electronic excitations is red-shifted from 330 nm to 410 nm using finite element analysis and from 331.27 nm to 409.07 nm using quantum mechanical method, with increasing particle sizes from 40 nm to 50 nm. The measured absorption maxima matched the simulated results reasonably well and red-shifted to longer wavelengths from 315.59 nm to 426.73 nm with the increase in particle sizes from 30 nm to 50 nm. The DFT simulated, FEA simulated and experimentally derived optical band gap energies, Eg, were also acquired and compared. The simulated Egvalues decreased from 3.228 to 2.478 e V and from 3.266 to 2.456 e V, while the experimental Egvalue decreased from 3.473 to 2.697 e V, with increasing the particle sizes. The research demonstrated that the optical absorption of CoFe2O4 nanoparticles can be described with high accuracy using the quantum mechanical interpretation based on DFT. FEA based simulations have shown limitations for smaller(< 40 nm) nanoparticles likely due to the increased surface scattering that prevented a stable solution for simulations beyond the quasistatic limit. The DFT computational tool developed by this study can enable both the low cost computation and highly reliable prediction of optical absorption properties and optical band edges, and thus contribute to understanding and design of CoFe2O4 nanoparticle properties prior to fabrication and functionalization of them, for a wide range of applications especially for sensing and photonic wave modulations.

Study of cobalt ferrite nanosuspensions for low-frequency ferromagnetic hyperthermia

High-coercive cobalt ferrite nanoparticles were synthesized and studied for magnetic hyperthermia by direct injection of their suspension into a tumor and application of a strong audio-frequency magnetic field for heating. Physical （dynamic magnetic hysteresis and heat generation in both liquid and solid dispersions）, biological （toxicity and penetration of particles in therapeutic quantities into mouse tumor tissue） as well as other properties of the particles were studied. A model was developed to describe the magnetodynamics in suspensions of magnetic nanoclusters with an account for both Brownian and regular rotations, to provide understanding of observed phenomena. The experimental and theoretical techniques developed have formed a basis for controllable synthesis of the magnetic nanoparticles for low-frequency heat generation in medical and other applications.

Structural and magnetic properties of turmeric functionalized CoFe_2O_4 nanocomposite powder

The structural and magnetic properties of the synthesized pure and functionalized CoFe2O4magnetic nanoparticles(NPs) are studied by analyzing the results from the x-ray diffraction(XRD), transmission electron microscopy(TEM), FT–IR spectroscopy, thermogravimetry(TG), and vibrating sample magnetometer(VSM). To extract the structure and lattice parameters from the XRD analysis results, we first apply the pseudo-Voigt model function to the experimental data obtained from XRD analysis and then the Rietveld algorithm is used in order to optimize the model function to estimate the true intensity values. Our simulated intensities are in good agreement with the experimental peaks, therefore, all structural parameters such as crystallite size and lattice constant are achieved through this simulation. Magnetic analysis reveals that the synthesized functionalized NPs have a saturation magnetization almost equal to that of pure nanoparticles(PNPs). It is also found that the presence of the turmeric causes a small reduction in coercivity of the functionalized NPs in comparison with PNP. Our TGA and FTIR results show that the turmeric is bonded very well to the surface of the NPs. So it can be inferred that a nancomposite(NC) powder of turmeric and nanoparticles is produced. As an application, the anti-arsenic characteristic of turmeric makes the synthesized functionalized NPs or NC powder a good candidate for arsenic removal from polluted industrial waste water.