Design of Protograph LDPC-Coded MIMO-VLC Systems with Generalized Spatial Modulation

This paper investigates the bit-interleaved coded generalized spatial modulation(BICGSM) with iterative decoding(BICGSM-ID) for multiple-input multiple-output(MIMO) visible light communications(VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain(SiD) symbols and the spatial-domain(SpD) light emitting diode(LED)-index patterns are coded by a protograph low-density parity-check(P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating(SSER) method for constructing a type of novel generalized spatial modulation(GSM) constellations, referred to as SSERGSM constellations, so as to boost the performance of the BICGSM-ID MIMO-VLC systems.Moreover, by applying a modified PEXIT(MPEXIT) algorithm, we further design a family of rate-compatible P-LDPC codes, referred to as enhanced accumulate-repeat-accumulate(EARA) codes,which possess both excellent decoding thresholds and linear-minimum-distance-growth property. Both analysis and simulation results illustrate that the proposed SSERGSM constellations and P-LDPC codes can remarkably improve the convergence and decoding performance of MIMO-VLC systems. Therefore, the proposed P-LDPC-coded SSERGSM-mapped BICGSMID configuration is envisioned as a promising transmission solution to satisfy the high-throughput requirement of MIMO-VLC applications.

Focus control of wide-angle metalens based on digitally encoded metasurface

Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in two-dimensional space. This metalens achieves focus shift in the x-direction by changing the oblique incidence angle of the incident wave,and focus control in the y-direction by combining with the convolution principle of the digitally coded metasurface to achieve flexible control of light focusing in the two-dimensional plane. The metasurface unit is mainly composed of threelayer of metal structure and two layers of medium, and the transmission phase is obtained by changing the middle layer of metal structure, which in turn obtains the required phase distribution of the metalens. The design of the metalens realizes the function of the lens with a large viewing angle at the x-polarized incidence, and realizes two-dimensional focus control. Experimentally, we prepared the designed coding metalens and tested the focus control function of the wide-angle coding metalens. The experimental results are in good agreement with the design results.

Variational Learned Talking-Head Semantic Coded Transmission System

Video transmission requires considerable bandwidth,and current widely employed schemes prove inadequate when confronted with scenes featuring prominently.Motivated by the strides in talkinghead generative technology,the paper introduces a semantic transmission system tailored for talking-head videos.The system captures semantic information from talking-head video and faithfully reconstructs source video at the receiver,only one-shot reference frame and compact semantic features are required for the entire transmission.Specifically,we analyze video semantics in the pixel domain frame-by-frame and jointly process multi-frame semantic information to seamlessly incorporate spatial and temporal information.Variational modeling is utilized to evaluate the diversity of importance among group semantics,thereby guiding bandwidth resource allocation for semantics to enhance system efficiency.The whole endto-end system is modeled as an optimization problem and equivalent to acquiring optimal rate-distortion performance.We evaluate our system on both reference frame and video transmission,experimental results demonstrate that our system can improve the efficiency and robustness of communications.Compared to the classical approaches,our system can save over 90%of bandwidth when user perception is close.

Layered Coded Cache Placement and Cooperative Delivery with Sharing Links in Satellite-Terrestrial Integrated Networks

Cooperative utilization of multidimensional resources including cache, power and spectrum in satellite-terrestrial integrated networks(STINs) can provide a feasible approach for massive streaming media content delivery over the seamless global coverage area. However, the on-board supportable resources of a single satellite are extremely limited and lack of interaction with others. In this paper, we design a network model with two-layered cache deployment, i.e., satellite layer and ground base station layer, and two types of sharing links, i.e., terrestrial-satellite sharing(TSS) links and inter-satellite sharing(ISS) links, to enhance the capability of cooperative delivery over STINs. Thus, we use rateless codes for the content divided-packet transmission, and derive the total energy efficiency(EE) in the whole transmission procedure, which is defined as the ratio of traffic offloading and energy consumption. We formulate two optimization problems about maximizing EE in different sharing scenarios(only TSS and TSS-ISS),and propose two optimized algorithms to obtain the optimal content placement matrixes, respectively.Simulation results demonstrate that, enabling sharing links with optimized cache placement have more than 2 times improvement of EE performance than other traditional placement schemes. Particularly, TSS-ISS schemes have the higher EE performance than only TSS schemes under the conditions of enough number of satellites and smaller inter-satellite distances.

Reconfigurable mechanism-based metamaterials for ternary-coded elastic wave polarizers and programmable refraction control

Elastic metamaterials with unusual elastic properties offer unprecedented ways to modulate the polarization and propagation of elastic waves.However,most of them rely on the resonant structural components,and thus are frequency-dependent and unchangeable.Here,we present a reconfigurable 2D mechanism-based metamaterial which possesses transformable and frequency-independent elastic properties.Based on the proposed mechanism-based metamaterial,interesting functionalities,such as ternarycoded elastic wave polarizer and programmable refraction,are demonstrated.Particularly,unique ternary-coded polarizers,with 1-trit polarization filtering and 2-trit polarization separating of longitudinal and transverse waves,are first achieved.Then,the strong anisotropy of the proposed metamaterial is harnessed to realize positive-negative bi-refraction,only-positive refraction,and only-negative refraction.Finally,the wave functions with detailed microstructures are numerically verified.

Incorporating red blanket protocol within code crimson:Streamlining definitive trauma care amid the chaos

The care of a patient involved in major trauma with exsanguinating haemorrhage is time-critical to achieve definitive haemorrhage control,and it requires coordinated multidisciplinary care.During initial resuscitation of a patient in the emergency department(ED),Code Crimson activation facilitates rapid decisionmaking by multi-disciplinary specialists for definitive haemorrhage control in operating theatre(OT)and/or interventional radiology(IR)suite.Once this decision has been made,there may still be various factors that lead to delay in transporting the patient from ED to OT/IR.Red Blanket protocol identifies and addresses these factors and processes which cause delay,and aims to facilitate rapid and safe transport of the haemodynamically unstable patient from ED to OT,while minimizing delay in resuscitation during the transfer.The two processes,Code Crimson and Red Blanket,complement each other.It would be ideal to merge the two processes into a single protocol rather than having two separate workflows.Introducing these quality improvement strategies and coor-dinated processes within the trauma framework of the hospitals/healthcare systems will help in further improving the multi-disciplinary care for the complex trauma patients requiring rapid and definitive haemorrhage control.

Performance analysis of coded OFDM systems using a novel class of LDPC codes

A new method of constructing regular low-density parity-check (LDPC) codes was proposed. And the novel class of LDPC codes was applied in a coded orthogonal frequency division multiplexing (OFDM) system. This method extended the class of LDPC codes which could be constructed from shifted identity matrices. The method could avoid short cycles in Tanner graphs with simple inequation in the construction of shifting identity matrices, which made the girth of Tanner graphs 8. Because of the quasicyclic structure and the inherent block configuration of parity-check matrices, the encoders and the decoders were practically feasible. They were linear-time encodable and decodable. The LDPC codes proposed had various code rates, ranging from low to high. They performed excellently with iterative decoding and demonstrate better performance than other regular LDPC codes in OFDM systems.

Design of Irregular QC-LDPC Code Based Multi-Level Coded Modulation Scheme for High Speed Optical Communication Systems

In this paper, we focus on the design of irregular QC-LDPC code based multi-level coded modulation(MLCM) scheme by jointly optimizing the component code rate and the degree distribution of the irregular QC-LDPC component code. Firstly, the sub-channel capacities of MLCM systems is analyzed and discussed, based on which the optimal component code rate can be obtained. Secondly, an extrinsic information transfer chart based two-stage searching algorithm is proposed to find the good irregular QC-LDPC code ensembles with optimal component code rates for their corresponding sub-channels. Finally, by constructing the irregular QC-LDPC component codes from the designed ensembles with the aim of possibly enlarging the girth and reducing the number of the shortest cycles, the designed irregular QC-LDPC code based 16QAM and 64QAM MLCM systems can achieve 0.4 dB and 1.2 dB net coding gain, respectively, compared with the recently proposed regular QC-LDPC code based 16QAM and 64QAM MLCM systems.

一种减小OFDM信号峰均功率比的Coded-SLM算法

针对减小正交频分复用(OFDM)系统峰均功率比(PAPR)的常规选择性映射(SLM)法不仅运算量大,而且需要传送代表相位序列的边信息,因而降低了有效的传输效率的问题,提出了一种基于线性分组码的Coded-SLM算法。理论分析和计算机仿真都表明,该方法与常规SLM法相比虽然在降低PAPR方面稍微逊色,但与原始OFDM相比能有效地降低OFDM信号的PAPR,而且传输效率和可靠性大为提高。

Performance improvement of magneto-acousto-electrical tomography for biological tissues with sinusoid-Barker coded excitation

By combining magnetics, acoustics and electrics, the magneto-acoustic-electrical tomography（MAET） proves to possess the capability of differentiating electrical impedance variation and thus improving the spatial resolution. However,the signal-to-noise ratio（SNR） of the collected MAET signal is still unsatisfactory for biological tissues with low-level electrical conductivity. In this study, the formula of MAET measurement with sinusoid-Barker coded excitation is derived and simplified for a planar piston transducer. Numerical simulations are conducted for a four-layered gel phantom with the 13-bit sinusoid-Barker coded excitation, and the performances of wave packet recovery with side-lobe suppression are improved by using the mismatched compression filter, which is also demonstrated by experimentally measuring a three-layered gel phantom. It is demonstrated that comparing with the single-cycle sinusoidal excitation, the amplitude of the driving signal can be reduced greatly with an SNR enhancement of 10 dB using the 13-bit sinusoid-Barker coded excitation. The amplitude and polarity of the wave packet filtered from the collected MAET signal can be used to achieve the conductivity derivative at the tissue boundary. In this study, we apply the sinusoid-Barker coded modulation method and the mismatched suppression scheme to MAET measurement to ensure the safety for biological tissues with improved SNR and spatial resolution, and suggest the potential applications in biomedical imaging.

An Energy-Efficient Network Coded Cooperation Scheme in Wireless Sensor Networks

Energy-efficient communications is crucial for wireless sensor networks(WSN) where energy consumption is constrained. The transmission and reception energy can be saved by applying network coding to many wireless communications systems. In this paper,we present a coded cooperation scheme which employs network coding to WSN. In the scheme,the partner node forwards the combination of the source data and its own data instead of sending the source data alone. Afterward,both of the system block error rates(BLERs) and energy performance are evaluated. Experiment results show that the proposed scheme has higher energy efficiency. When Noise power spectral density is-171dBm/Hz,the energy consumption of the coded cooperation scheme is 81.1% lower than that of the single-path scheme,43.9% lower than that of the cooperation scheme to reach the target average BLER of 10-2. When the channel condition is getting worse,the energy saving effect is more obvious.

Key technology of mine underground mobile positioning based on LiDAR and coded sequence pattern

Technologies of underground mobile positioning were proposed based on LiDAR data and coded sequence pattern landmarks for mine shafts and tunnels environment to meet the needs of fast and accurate positioning and navigation of equipments in the mine underground without satellite navigation signals. A coded sequence pattern was employed for automatic matching of 3D scans. The methods of SIFT feature, Otsu segmentation and fast hough transformation were described for the identification, positioning and interpretation of the coded sequence patterns, respectively. The POSIT model was presented for speeding up computation of the translation and rotation parameters of LiDAR point data, so as to achieve automatic 3D mapping of mine shafts and tunnels. The moving positioning experiment was applied to evaluating the accuracy of proposed pose estimation method from LiDAR scans and coded sequence pattern landmarks acquired in an indoor environment. The performance was evaluated using ground truth data of the indoor setting so as to measure derivations with six degrees of freedom.

A New Region-of-interest Coding Method to Control the Relative Quality of Progressive Decoded Images

Based on the ideas of controlling relative quality and rearranging bitplanes, a new ROI coding method for JPEG2000 was proposed, which shifts and rearranges bitplanes in units of bitplane groups. It can code arbitrary shaped ROI without shape coding, and reserve almost arbitrary percent of background information. It also can control the relative quality of progressive decoded images. In addition, it is easy to be implemented and has low computational cost.

Totally Coded Method for Signal Flow Graph Algorithm

After a code-table has been established by means of node association information from signal flow graph, the totally coded method (TCM) is applied merely in the domain of code operation beyond any figure-earching algorithm. The code-series (CS) have the holo-information nature, so that both the content and the sign of each gain-term can be determined via the coded method. The principle of this method is simple and it is suited for computer programming. The capability of the computer-aided analysis for switched current network (SIN) can be enhanced.

Complex field network-coded cooperation based on multi-user detection in wireless networks

Cooperative communication can achieve spatial diversity gains,and consequently combats signal fading due to multipath propagation in wireless networks powerfully.A novel complex field network-coded cooperation（CFNCC） scheme based on multi-user detection for the multiple unicast transmission is proposed.Theoretic analysis and simulation results demonstrate that,compared with the conventional cooperation（CC） scheme and network-coded cooperation（NCC） scheme,CFNCC would obtain higher network throughput and consumes less time slots.Moreover,a further investigation is made for the symbol error probability（SEP） performance of CFNCC scheme,and SEPs of CFNCC scheme are compared with those of NCC scheme in various scenarios for different signal to noise ratio（SNR） values.

Novel non-coherent integration method using binary phase-coded radar signal

The m series with 511 bits is taken as an example being applied in non-coherent integra- tion algorithm. A method to choose the bi-phase code is presented, which is 15 kinds of codes are picked out of 511 kinds of m series to do non-coherent integration. It is indicated that the power in- creasing times of larger target sidelobe is less than the power increasing times of smaller target main- lobe because of the larger target＇ s pseudo-randomness. Smaller target is integrated from larger tar- get sidelobe, which strengthens the detection capability of radar for smaller targets. According to the sidelobes distributing characteristic, a method is presented in this paper to remove the estimated sidelobes mean value for signal detection after non-coherent integration. Simulation results present that the SNR of small target can be improved approximately 6. 5 dB by the proposed method.

Design and performance analysis of adaptive ordered LDPC coded OFDM system

A novel adaptive ordered LDPC （low-density parity-check） coded OFDM （orthogonal frequency-division multiplexing） transmission technique is proposed to exploit different error probabilities of irregular LDPC coded bits in OFDM systems. Assuming that the CSI （channel state information） is known at the transmitter, the irregular LDPC coded bits are ordered according to their degrees and then allocated into subcarriers adaptively. Bits with higher degrees are allocated into less attenuated subcarriers and bits with lower degrees are allocated into deep attenuated subcarriers. Quantization on CSI feedback can be applied to minimize the signaling overhead. Performance of this strategy is analyzed by density evolution and numerical simulation. Simulation results show that about a 1 to 1.5 dB gain in terms of SNR （ signal to noise ratio） can be achieved over frequency-selective fading channels compared to conventional LDPC coded OFDM systems without ordering, and the proposed scheme is robust to CSI quantization.

Power Splitting Based SWIPT in Network-Coded Two-Way Networks with Data Rate Fairness:An Information-Theoretic Perspective

This paper investigates the simultaneous wireless information and powertransfer(SWIPT) for network-coded two-way relay network from an information-theoretic perspective, where two sources exchange information via an SWIPT-aware energy harvesting(EH) relay. We present a power splitting(PS)-based two-way relaying(PS-TWR) protocol by employing the PS receiver architecture. To explore the system sum rate limit with data rate fairness, an optimization problem under total power constraint is formulated. Then, some explicit solutions are derived for the problem. Numerical results show that due to the path loss effect on energy transfer, with the same total available power, PS-TWR losses some system performance compared with traditional non-EH two-way relaying, where at relatively low and relatively high signalto-noise ratio(SNR), the performance loss is relatively small. Another observation is that, in relatively high SNR regime, PS-TWR outperforms time switching-based two-way relaying(TS-TWR) while in relatively low SNR regime TS-TWR outperforms PS-TWR. It is also shown that with individual available power at the two sources, PS-TWR outperforms TS-TWR in both relatively low and high SNR regimes.

JOINT ITERATIVE DECODING FOR SIMPLE-ENCODING SYSTEMATIC IRREGULAR-LDPC-BASED CODED COOPERATION IN NON-IDEAL RELAY CHANNEL

In this paper, a new kind of simple-encoding irregular systematic LDPC codes suitable for one-relay coded cooperation is designed, where the proposed joint iterative decoding is effectively performed in the destination which is in accordance with the corresponding joint Tanner graph characterizing two different component LDPC codes used by the source and relay in ideal and non-ideal relay cooperations. The theoretical analysis and simulations show that the coded cooperation scheme obviously outperforms the coded non-cooperation one under the same code rate and decoding complex. The significant performance improvement can be virtually credited to the additional mutual exchange of the extrinsic information resulted by the LDPC code employed by the source and its counterpart used by the relay in both ideal and non-ideal cooperations.

A Decode-and-Forward Scheme for LDPC Coded Three-Way Relay Fading Channels

In this paper a low-density pairwise check(LDPC) coded three-way relay system is considered, where three user nodes desire to exchange messages with the help of one relay node. Since physical-layer network coding is applied, two time slots are sufficient for one round information exchange. In this paper, we present a decode-and-forward(DF) scheme based on joint LDPC decoding for three-way relay channels, where relay decoder partially decodes the network code rather than fully decodes all the user messages. Simulation results show that the new DF scheme considerably outperforms other common schemes in three-way relay fading channels.