Wireless Network security management is difficult because of the ever-increasing number of wireless network malfunctions,vulnerabilities,and assaults.Complex security systems,such as Intrusion Detection Systems(IDS),a...Wireless Network security management is difficult because of the ever-increasing number of wireless network malfunctions,vulnerabilities,and assaults.Complex security systems,such as Intrusion Detection Systems(IDS),are essential due to the limitations of simpler security measures,such as cryptography and firewalls.Due to their compact nature and low energy reserves,wireless networks present a significant challenge for security procedures.The features of small cells can cause threats to the network.Network Coding(NC)enabled small cells are vulnerable to various types of attacks.Avoiding attacks and performing secure“peer”to“peer”data transmission is a challenging task in small cells.Due to the low power and memory requirements of the proposed model,it is well suited to use with constrained small cells.An attacker cannot change the contents of data and generate a new Hashed Homomorphic Message Authentication Code(HHMAC)hash between transmissions since the HMAC function is generated using the shared secret.In this research,a chaotic sequence mapping based low overhead 1D Improved Logistic Map is used to secure“peer”to“peer”data transmission model using lightweight H-MAC(1D-LM-P2P-LHHMAC)is proposed with accurate intrusion detection.The proposed model is evaluated with the traditional models by considering various evaluation metrics like Vector Set Generation Accuracy Levels,Key Pair Generation Time Levels,Chaotic Map Accuracy Levels,Intrusion Detection Accuracy Levels,and the results represent that the proposed model performance in chaotic map accuracy level is 98%and intrusion detection is 98.2%.The proposed model is compared with the traditional models and the results represent that the proposed model secure data transmission levels are high.展开更多
Coding sequences (CDS) are commonly used for transient gene expression, in yeast two-hybrid screening, to verify protein interactions and in prokaryotic gene expression studies. CDS are most commonly obtained using co...Coding sequences (CDS) are commonly used for transient gene expression, in yeast two-hybrid screening, to verify protein interactions and in prokaryotic gene expression studies. CDS are most commonly obtained using complementary DNA (cDNA) derived from messenger RNA (mRNA) extracted from plant tissues and generated by reverse transcription. However, some CDS are difficult to acquire through this process as they are expressed at extremely low levels or have specific spatial and/or temporal expression patterns in vivo. These challenges require the development of alternative CDS cloning technologies. In this study, we found that the genomic intron-containing gene coding sequences (gDNA) from Arabidopsis thaliana, Oryza sativa, Brassica napus, and Glycine max can be correctly transcribed and spliced into mRNA in Nicotiana benthamiana. In contrast, gDNAs from Triticum aestivum and Sorghum bicolor did not function correctly. In transient expression experiments, the target DNA sequence is driven by a constitutive promoter. Theoretically, a sufficient amount of mRNA can be extracted from the N. benthamiana leaves, making it conducive to the cloning of CDS target genes. Our data demonstrate that N. benthamiana can be used as an effective host for the cloning CDS of plant genes.展开更多
In some schemes, quantum blind signatures require the use of difficult-to-prepare multiparticle entangled states. By considering the communication overhead, quantum operation complexity, verification efficiency and ot...In some schemes, quantum blind signatures require the use of difficult-to-prepare multiparticle entangled states. By considering the communication overhead, quantum operation complexity, verification efficiency and other relevant factors in practical situations, this article proposes a non-entangled quantum blind signature scheme based on dense encoding. The information owner utilizes dense encoding and hash functions to blind the information while reducing the use of quantum resources. After receiving particles, the signer encrypts the message using a one-way function and performs a Hadamard gate operation on the selected single photon to generate the signature. Then the verifier performs a Hadamard gate inverse operation on the signature and combines it with the encoding rules to restore the message and complete the verification.Compared with some typical quantum blind signature protocols, this protocol has strong blindness in privacy protection,and higher flexibility in scalability and application. The signer can adjust the signature operation according to the actual situation, which greatly simplifies the complexity of the signature. By simultaneously utilizing the secondary distribution and rearrangement of non-entangled quantum states, a non-entangled quantum state representation of three bits of classical information is achieved, reducing the use of a large amount of quantum resources and lowering implementation costs. This improves both signature verification efficiency and communication efficiency while, at the same time, this scheme meets the requirements of unforgeability, non-repudiation, and prevention of information leakage.展开更多
Quantum error correction, a technique that relies on the principle of redundancy to encode logical information into additional qubits to better protect the system from noise, is necessary to design a viable quantum co...Quantum error correction, a technique that relies on the principle of redundancy to encode logical information into additional qubits to better protect the system from noise, is necessary to design a viable quantum computer. For this new topological stabilizer code-XYZ^(2) code defined on the cellular lattice, it is implemented on a hexagonal lattice of qubits and it encodes the logical qubits with the help of stabilizer measurements of weight six and weight two. However topological stabilizer codes in cellular lattice quantum systems suffer from the detrimental effects of noise due to interaction with the environment. Several decoding approaches have been proposed to address this problem. Here, we propose the use of a state-attention based reinforcement learning decoder to decode XYZ^(2) codes, which enables the decoder to more accurately focus on the information related to the current decoding position, and the error correction accuracy of our reinforcement learning decoder model under the optimisation conditions can reach 83.27% under the depolarizing noise model, and we have measured thresholds of 0.18856 and 0.19043 for XYZ^(2) codes at code spacing of 3–7 and 7–11, respectively. our study provides directions and ideas for applications of decoding schemes combining reinforcement learning attention mechanisms to other topological quantum error-correcting codes.展开更多
Quantum error correction is a crucial technology for realizing quantum computers.These computers achieve faulttolerant quantum computing by detecting and correcting errors using decoding algorithms.Quantum error corre...Quantum error correction is a crucial technology for realizing quantum computers.These computers achieve faulttolerant quantum computing by detecting and correcting errors using decoding algorithms.Quantum error correction using neural network-based machine learning methods is a promising approach that is adapted to physical systems without the need to build noise models.In this paper,we use a distributed decoding strategy,which effectively alleviates the problem of exponential growth of the training set required for neural networks as the code distance of quantum error-correcting codes increases.Our decoding algorithm is based on renormalization group decoding and recurrent neural network decoder.The recurrent neural network is trained through the ResNet architecture to improve its decoding accuracy.Then we test the decoding performance of our distributed strategy decoder,recurrent neural network decoder,and the classic minimum weight perfect matching(MWPM)decoder for rotated surface codes with different code distances under the circuit noise model,the thresholds of these three decoders are about 0.0052,0.0051,and 0.0049,respectively.Our results demonstrate that the distributed strategy decoder outperforms the other two decoders,achieving approximately a 5%improvement in decoding efficiency compared to the MWPM decoder and approximately a 2%improvement compared to the recurrent neural network decoder.展开更多
This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding type...This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.展开更多
Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved s...Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved segmented belief propagation list decoding based on bit flipping(SBPL-BF) is proposed. On the one hand, the proposed algorithm makes use of the cooperative characteristic in BPL decoding such that the codeword is decoded in different BP decoders. Based on this characteristic, the unreliable bits for flipping could be split into multiple subblocks and could be flipped in different decoders simultaneously. On the other hand, a more flexible and effective processing strategy for the priori information of the unfrozen bits that do not need to be flipped is designed to improve the decoding convergence. In addition, this is the first proposal in BPL decoding which jointly optimizes the bit flipping of the information bits and the code bits. In particular, for bit flipping of the code bits, a H-matrix aided bit-flipping algorithm is designed to enhance the accuracy in identifying erroneous code bits. The simulation results show that the proposed algorithm significantly improves the errorcorrection performance of BPL decoding for medium and long codes. It is more than 0.25 d B better than the state-of-the-art BPL decoding at a block error rate(BLER) of 10^(-5), and outperforms CA-SCL decoding in the low signal-to-noise(SNR) region for(1024, 0.5)polar codes.展开更多
BACKGROUND with the widespread application of computer network systems in the medical field,the plan-do-check-action(PDCA)and the international classification of diseases tenth edition(ICD-10)coding system have also a...BACKGROUND with the widespread application of computer network systems in the medical field,the plan-do-check-action(PDCA)and the international classification of diseases tenth edition(ICD-10)coding system have also achieved favorable results in clinical medical record management.However,research on their combined application is relatively lacking.Objective:it was to explore the impact of network systems and PDCA management mode on ICD-10 encoding.Material and Method:a retrospective collection of 768 discharged medical records from the Medical Record Management Department of Meishan People’s Hospital was conducted.They were divided into a control group(n=232)and an observation group(n=536)based on whether the PDCA management mode was implemented.The two sets of coding accuracy,time spent,case completion rate,satisfaction,and other indicators were compared.AIM To study the adoption of network and PDCA in the ICD-10.METHODS A retrospective collection of 768 discharged medical records from the Medical Record Management Department of Meishan People’s Hospital was conducted.They were divided into a control group(n=232)and an observation group(n=536)based on whether the PDCA management mode was implemented.The two sets of coding accuracy,time spent,case completion rate,satisfaction,and other indicators were compared.RESULTS In the 3,6,12,18,and 24 months of PDCA cycle management mode,the coding accuracy and medical record completion rate were higher,and the coding time was lower in the observation group as against the controls(P<0.05).The satisfaction of coders(80.22%vs 53.45%)and patients(84.89%vs 51.72%)in the observation group was markedly higher as against the controls(P<0.05).CONCLUSION The combination of computer networks and PDCA can improve the accuracy,efficiency,completion rate,and satisfaction of ICD-10 coding.展开更多
This paper proposes an adaptive hybrid forward error correction(AH-FEC)coding scheme for coping with dynamic packet loss events in video and audio transmission.Specifically,the proposed scheme consists of a hybrid Ree...This paper proposes an adaptive hybrid forward error correction(AH-FEC)coding scheme for coping with dynamic packet loss events in video and audio transmission.Specifically,the proposed scheme consists of a hybrid Reed-Solomon and low-density parity-check(RS-LDPC)coding system,combined with a Kalman filter-based adaptive algorithm.The hybrid RS-LDPC coding accommodates a wide range of code length requirements,employing RS coding for short codes and LDPC coding for medium-long codes.We delimit the short and medium-length codes by coding performance so that both codes remain in the optimal region.Additionally,a Kalman filter-based adaptive algorithm has been developed to handle dynamic alterations in a packet loss rate.The Kalman filter estimates packet loss rate utilizing observation data and system models,and then we establish the redundancy decision module through receiver feedback.As a result,the lost packets can be perfectly recovered by the receiver based on the redundant packets.Experimental results show that the proposed method enhances the decoding performance significantly under the same redundancy and channel packet loss.展开更多
To improve the performance of video compression for machine vision analysis tasks,a video coding for machines(VCM)standard working group was established to promote standardization procedures.In this paper,recent advan...To improve the performance of video compression for machine vision analysis tasks,a video coding for machines(VCM)standard working group was established to promote standardization procedures.In this paper,recent advances in video coding for machine standards are presented and comprehensive introductions to the use cases,requirements,evaluation frameworks and corresponding metrics of the VCM standard are given.Then the existing methods are presented,introducing the existing proposals by category and the research progress of the latest VCM conference.Finally,we give conclusions.展开更多
Owing to the constraints on the fabrication ofγ-ray coding plates with many pixels,few studies have been carried out onγ-ray computational ghost imaging.Thus,the development of coding plates with fewer pixels is ess...Owing to the constraints on the fabrication ofγ-ray coding plates with many pixels,few studies have been carried out onγ-ray computational ghost imaging.Thus,the development of coding plates with fewer pixels is essential to achieveγ-ray computational ghost imaging.Based on the regional similarity between Hadamard subcoding plates,this study presents an optimization method to reduce the number of pixels of Hadamard coding plates.First,a moving distance matrix was obtained to describe the regional similarity quantitatively.Second,based on the matrix,we used two ant colony optimization arrangement algorithms to maximize the reuse of pixels in the regional similarity area and obtain new compressed coding plates.With full sampling,these two algorithms improved the pixel utilization of the coding plate,and the compression ratio values were 54.2%and 58.9%,respectively.In addition,three undersampled sequences(the Harr,Russian dolls,and cake-cutting sequences)with different sampling rates were tested and discussed.With different sampling rates,our method reduced the number of pixels of all three sequences,especially for the Russian dolls and cake-cutting sequences.Therefore,our method can reduce the number of pixels,manufacturing cost,and difficulty of the coding plate,which is beneficial for the implementation and application ofγ-ray computational ghost imaging.展开更多
Recently,a generalized successive cancellation list(SCL)decoder implemented with shiftedpruning(SP)scheme,namely the SCL-SP-ωdecoder,is presented for polar codes,which is able to shift the pruning window at mostωtim...Recently,a generalized successive cancellation list(SCL)decoder implemented with shiftedpruning(SP)scheme,namely the SCL-SP-ωdecoder,is presented for polar codes,which is able to shift the pruning window at mostωtimes during each SCL re-decoding attempt to prevent the correct path from being eliminated.The candidate positions for applying the SP scheme are selected by a shifting metric based on the probability that the elimination occurs.However,the number of exponential/logarithm operations involved in the SCL-SP-ωdecoder grows linearly with the number of information bits and list size,which leads to high computational complexity.In this paper,we present a detailed analysis of the SCL-SP-ωdecoder in terms of the decoding performance and complexity,which unveils that the choice of the shifting metric is essential for improving the decoding performance and reducing the re-decoding attempts simultaneously.Then,we introduce a simplified metric derived from the path metric(PM)domain,and a custom-tailored deep learning(DL)network is further designed to enhance the efficiency of the proposed simplified metric.The proposed metrics are both free of transcendental functions and hence,are more hardware-friendly than the existing metrics.Simulation results show that the proposed DL-aided metric provides the best error correction performance as comparison with the state of the art.展开更多
Belief propagation(BP)decoding outputs soft information and can be naturally used in iterative receivers.BP list(BPL)decoding provides comparable error-correction performance to the successive cancellation list(SCL)de...Belief propagation(BP)decoding outputs soft information and can be naturally used in iterative receivers.BP list(BPL)decoding provides comparable error-correction performance to the successive cancellation list(SCL)decoding.In this paper,we firstly introduce an enhanced code construction scheme for BPL decoding to improve its errorcorrection capability.Then,a GPU-based BPL decoder with adoption of the new code construction is presented.Finally,the proposed BPL decoder is tested on NVIDIA RTX3070 and GTX1060.Experimental results show that the presented BPL decoder with early termination criterion achieves above 1 Gbps throughput on RTX3070 for the code(1024,512)with 32 lists under good channel conditions.展开更多
Background: Cause-of-death rankings are often used for planning or evaluating health policy measures. In the European Union, some countries produce cause-of-death statistics by a manual coding of death certificates, w...Background: Cause-of-death rankings are often used for planning or evaluating health policy measures. In the European Union, some countries produce cause-of-death statistics by a manual coding of death certificates, while other countries use an automated coding system. The outcome of these two different methods in terms of the selected underlying cause of death for statistics may vary considerably. Therefore, this study explores the effect of coding method on the ranking of countries by major causes of death. Method: Age and sex standardized rates were extracted for 33 European (related) countries from the cause-of-death registry of the European Statistical Office (Eurostat). Wilcoxon’s rank sum test was applied to the ranking of countries by major causes of death. Results: Statistically significant differences due to coding method were identified for dementia, stroke and pneumonia. These differences could be explained by a different selection of dementia or pneumonia as underlying cause of death and by a different certification practice for stroke. Conclusion: Coding method should be taken into account when constructing or interpreting rankings of countries by cause of death.展开更多
Sparse coding is a prevalent method for image inpainting and feature extraction,which can repair corrupted images or improve data processing efficiency,and has numerous applications in computer vision and signal proce...Sparse coding is a prevalent method for image inpainting and feature extraction,which can repair corrupted images or improve data processing efficiency,and has numerous applications in computer vision and signal processing.Recently,sev-eral memristor-based in-memory computing systems have been proposed to enhance the efficiency of sparse coding remark-ably.However,the variations and low precision of the devices will deteriorate the dictionary,causing inevitable degradation in the accuracy and reliability of the application.In this work,a digital-analog hybrid memristive sparse coding system is pro-posed utilizing a multilevel Pt/Al_(2)O_(3)/AlO_(x)/W memristor,which employs the forward stagewise regression algorithm:The approxi-mate cosine distance calculation is conducted in the analog part to speed up the computation,followed by high-precision coeffi-cient updates performed in the digital portion.We determine that four states of the aforementioned memristor are sufficient for the processing of natural images.Furthermore,through dynamic adjustment of the mapping ratio,the precision require-ment for the digit-to-analog converters can be reduced to 4 bits.Compared to the previous system,our system achieves higher image reconstruction quality of the 38 dB peak-signal-to-noise ratio.Moreover,in the context of image inpainting,images containing 50%missing pixels can be restored with a reconstruction error of 0.0424 root-mean-squared error.展开更多
Video games have been around for several decades and have had many advancements from the original start of video games. Video games started as virtual games that were advertised towards children, and these virtual gam...Video games have been around for several decades and have had many advancements from the original start of video games. Video games started as virtual games that were advertised towards children, and these virtual games created a virtual reality of a variety of genres. These genres included sports games, such as tennis, football, baseball, war games, fantasy, puzzles, etc. The start of these games was derived from a sports genre and now has a popularity in multiplayer-online-shooting games. The purpose of this paper is to investigate different types of tools available for cheating in virtual world making players have undue advantage over other players in a competition. With the advancement in technology, these video games have become more expanded in the development aspects of gaming. Video game developers have created long lines of codes to create a new look of video games. As video games have progressed, the coding, bugs, bots, and errors of video games have changed throughout the years. The coding of video games has branched out from the original video games, which have given many benefits to this virtual world, while simultaneously creating more problems such as bots. Analysis of tools available for cheating in a game has disadvantaged normal gamer in a fair contest.展开更多
For polar codes,the performance of successive cancellation list(SCL)decoding is capable of approaching that of maximum likelihood decoding.However,the existing hardware architectures for the SCL decoding suffer from h...For polar codes,the performance of successive cancellation list(SCL)decoding is capable of approaching that of maximum likelihood decoding.However,the existing hardware architectures for the SCL decoding suffer from high hardware complexity due to calculating L decoding paths simultaneously,which are unfriendly to the devices with limited logical resources,such as field programmable gate arrays(FPGAs).In this paper,we propose a list-serial pipelined hardware architecture with low complexity for the SCL decoding,where the serial calculation and the pipelined operation are elegantly combined to strike a balance between the complexity and the latency.Moreover,we employ only one successive cancellation(SC)decoder core without L×L crossbars,and reduce the number of inputs of the metric sorter from 2L to L+2.Finally,the FPGA implementations show that the hardware resource consumption is significantly reduced with negligible decoding performance loss.展开更多
To support mission-critical applications, such as factory automation and autonomous driving, the ultra-reliable low latency communications (URLLC) is adopted in the fifth generation (5G) mobile communications network,...To support mission-critical applications, such as factory automation and autonomous driving, the ultra-reliable low latency communications (URLLC) is adopted in the fifth generation (5G) mobile communications network, which requires high level of reliability and low latency. Naturally, URLLC in the future 6G is expected to have a better capability than its 5G version which poses an unprecedented challenge to us. Fortunately, the potential solution can still be found in the well-known classical Shannon information theory. Since the latency constraint can be represented equivalently by blocklength, channel coding at finite blocklength plays an important role in the theoretic analysis of URLLC. Applying these achievements in rapidly development of massive MIMO techniques gives rise to a new theory on space time exchanging. It tells us that channel coding can also be performed in space domain, since it is capable of providing the same coding rate as that in time domain. This space time exchanging theory points out an exciting and feasible direction for us to further reduce latency in 6G URLLC. .展开更多
Activation functions play an essential role in converting the output of the artificial neural network into nonlinear results,since without this nonlinearity,the results of the network will be less accurate.Nonlinearity...Activation functions play an essential role in converting the output of the artificial neural network into nonlinear results,since without this nonlinearity,the results of the network will be less accurate.Nonlinearity is the mission of all nonlinear functions,except for polynomials.The activation function must be dif-ferentiable for backpropagation learning.This study’s objective is to determine the best activation functions for the approximation of each fractal image.Different results have been attained using Matlab and Visual Basic programs,which indi-cate that the bounded function is more helpful than other functions.The non-lin-earity of the activation function is important when using neural networks for coding fractal images because the coefficients of the Iterated Function System are different according to the different types of fractals.The most commonly cho-sen activation function is the sigmoidal function,which produces a positive value.Other functions,such as tansh or arctan,whose values can be positive or negative depending on the network input,tend to train neural networks faster.The coding speed of the fractal image is different depending on the appropriate activation function chosen for each fractal shape.In this paper,we have provided the appro-priate activation functions for each type of system of iterated functions that help the network to identify the transactions of the system.展开更多
In today’s information technology(IT)world,the multi-hop wireless sensor networks(MHWSNs)are considered the building block for the Internet of Things(IoT)enabled communication systems for controlling everyday tasks o...In today’s information technology(IT)world,the multi-hop wireless sensor networks(MHWSNs)are considered the building block for the Internet of Things(IoT)enabled communication systems for controlling everyday tasks of organizations and industry to provide quality of service(QoS)in a stipulated time slot to end-user over the Internet.Smart city(SC)is an example of one such application which can automate a group of civil services like automatic control of traffic lights,weather prediction,surveillance,etc.,in our daily life.These IoT-based networks with multi-hop communication and multiple sink nodes provide efficient communication in terms of performance parameters such as throughput,energy efficiency,and end-to-end delay,wherein low latency is considered a challenging issue in next-generation networks(NGN).This paper introduces a single and parallels stable server queuing model with amulti-class of packets and native and coded packet flowto illustrate the simple chain topology and complexmultiway relay(MWR)node with specific neighbor topology.Further,for improving data transmission capacity inMHWSNs,an analytical framework for packet transmission using network coding at the MWR node in the network layer with opportunistic listening is performed by considering bi-directional network flow at the MWR node.Finally,the accuracy of the proposed multi-server multi-class queuing model is evaluated with and without network coding at the network layer by transmitting data packets.The results of the proposed analytical framework are validated and proved effective by comparing these analytical results to simulation results.展开更多
文摘Wireless Network security management is difficult because of the ever-increasing number of wireless network malfunctions,vulnerabilities,and assaults.Complex security systems,such as Intrusion Detection Systems(IDS),are essential due to the limitations of simpler security measures,such as cryptography and firewalls.Due to their compact nature and low energy reserves,wireless networks present a significant challenge for security procedures.The features of small cells can cause threats to the network.Network Coding(NC)enabled small cells are vulnerable to various types of attacks.Avoiding attacks and performing secure“peer”to“peer”data transmission is a challenging task in small cells.Due to the low power and memory requirements of the proposed model,it is well suited to use with constrained small cells.An attacker cannot change the contents of data and generate a new Hashed Homomorphic Message Authentication Code(HHMAC)hash between transmissions since the HMAC function is generated using the shared secret.In this research,a chaotic sequence mapping based low overhead 1D Improved Logistic Map is used to secure“peer”to“peer”data transmission model using lightweight H-MAC(1D-LM-P2P-LHHMAC)is proposed with accurate intrusion detection.The proposed model is evaluated with the traditional models by considering various evaluation metrics like Vector Set Generation Accuracy Levels,Key Pair Generation Time Levels,Chaotic Map Accuracy Levels,Intrusion Detection Accuracy Levels,and the results represent that the proposed model performance in chaotic map accuracy level is 98%and intrusion detection is 98.2%.The proposed model is compared with the traditional models and the results represent that the proposed model secure data transmission levels are high.
文摘Coding sequences (CDS) are commonly used for transient gene expression, in yeast two-hybrid screening, to verify protein interactions and in prokaryotic gene expression studies. CDS are most commonly obtained using complementary DNA (cDNA) derived from messenger RNA (mRNA) extracted from plant tissues and generated by reverse transcription. However, some CDS are difficult to acquire through this process as they are expressed at extremely low levels or have specific spatial and/or temporal expression patterns in vivo. These challenges require the development of alternative CDS cloning technologies. In this study, we found that the genomic intron-containing gene coding sequences (gDNA) from Arabidopsis thaliana, Oryza sativa, Brassica napus, and Glycine max can be correctly transcribed and spliced into mRNA in Nicotiana benthamiana. In contrast, gDNAs from Triticum aestivum and Sorghum bicolor did not function correctly. In transient expression experiments, the target DNA sequence is driven by a constitutive promoter. Theoretically, a sufficient amount of mRNA can be extracted from the N. benthamiana leaves, making it conducive to the cloning of CDS target genes. Our data demonstrate that N. benthamiana can be used as an effective host for the cloning CDS of plant genes.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61762039)。
文摘In some schemes, quantum blind signatures require the use of difficult-to-prepare multiparticle entangled states. By considering the communication overhead, quantum operation complexity, verification efficiency and other relevant factors in practical situations, this article proposes a non-entangled quantum blind signature scheme based on dense encoding. The information owner utilizes dense encoding and hash functions to blind the information while reducing the use of quantum resources. After receiving particles, the signer encrypts the message using a one-way function and performs a Hadamard gate operation on the selected single photon to generate the signature. Then the verifier performs a Hadamard gate inverse operation on the signature and combines it with the encoding rules to restore the message and complete the verification.Compared with some typical quantum blind signature protocols, this protocol has strong blindness in privacy protection,and higher flexibility in scalability and application. The signer can adjust the signature operation according to the actual situation, which greatly simplifies the complexity of the signature. By simultaneously utilizing the secondary distribution and rearrangement of non-entangled quantum states, a non-entangled quantum state representation of three bits of classical information is achieved, reducing the use of a large amount of quantum resources and lowering implementation costs. This improves both signature verification efficiency and communication efficiency while, at the same time, this scheme meets the requirements of unforgeability, non-repudiation, and prevention of information leakage.
基金supported by the Natural Science Foundation of Shandong Province,China (Grant No. ZR2021MF049)Joint Fund of Natural Science Foundation of Shandong Province (Grant Nos. ZR2022LLZ012 and ZR2021LLZ001)。
文摘Quantum error correction, a technique that relies on the principle of redundancy to encode logical information into additional qubits to better protect the system from noise, is necessary to design a viable quantum computer. For this new topological stabilizer code-XYZ^(2) code defined on the cellular lattice, it is implemented on a hexagonal lattice of qubits and it encodes the logical qubits with the help of stabilizer measurements of weight six and weight two. However topological stabilizer codes in cellular lattice quantum systems suffer from the detrimental effects of noise due to interaction with the environment. Several decoding approaches have been proposed to address this problem. Here, we propose the use of a state-attention based reinforcement learning decoder to decode XYZ^(2) codes, which enables the decoder to more accurately focus on the information related to the current decoding position, and the error correction accuracy of our reinforcement learning decoder model under the optimisation conditions can reach 83.27% under the depolarizing noise model, and we have measured thresholds of 0.18856 and 0.19043 for XYZ^(2) codes at code spacing of 3–7 and 7–11, respectively. our study provides directions and ideas for applications of decoding schemes combining reinforcement learning attention mechanisms to other topological quantum error-correcting codes.
基金Project supported by Natural Science Foundation of Shandong Province,China (Grant Nos.ZR2021MF049,ZR2022LLZ012,and ZR2021LLZ001)。
文摘Quantum error correction is a crucial technology for realizing quantum computers.These computers achieve faulttolerant quantum computing by detecting and correcting errors using decoding algorithms.Quantum error correction using neural network-based machine learning methods is a promising approach that is adapted to physical systems without the need to build noise models.In this paper,we use a distributed decoding strategy,which effectively alleviates the problem of exponential growth of the training set required for neural networks as the code distance of quantum error-correcting codes increases.Our decoding algorithm is based on renormalization group decoding and recurrent neural network decoder.The recurrent neural network is trained through the ResNet architecture to improve its decoding accuracy.Then we test the decoding performance of our distributed strategy decoder,recurrent neural network decoder,and the classic minimum weight perfect matching(MWPM)decoder for rotated surface codes with different code distances under the circuit noise model,the thresholds of these three decoders are about 0.0052,0.0051,and 0.0049,respectively.Our results demonstrate that the distributed strategy decoder outperforms the other two decoders,achieving approximately a 5%improvement in decoding efficiency compared to the MWPM decoder and approximately a 2%improvement compared to the recurrent neural network decoder.
基金supported in part by the National Natural Science Foundation of China(Nos.62071441 and 61701464)in part by the Fundamental Research Funds for the Central Universities(No.202151006).
文摘This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.
基金funded by the Key Project of NSFC-Guangdong Province Joint Program(Grant No.U2001204)the National Natural Science Foundation of China(Grant Nos.61873290 and 61972431)+1 种基金the Science and Technology Program of Guangzhou,China(Grant No.202002030470)the Funding Project of Featured Major of Guangzhou Xinhua University(2021TZ002).
文摘Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved segmented belief propagation list decoding based on bit flipping(SBPL-BF) is proposed. On the one hand, the proposed algorithm makes use of the cooperative characteristic in BPL decoding such that the codeword is decoded in different BP decoders. Based on this characteristic, the unreliable bits for flipping could be split into multiple subblocks and could be flipped in different decoders simultaneously. On the other hand, a more flexible and effective processing strategy for the priori information of the unfrozen bits that do not need to be flipped is designed to improve the decoding convergence. In addition, this is the first proposal in BPL decoding which jointly optimizes the bit flipping of the information bits and the code bits. In particular, for bit flipping of the code bits, a H-matrix aided bit-flipping algorithm is designed to enhance the accuracy in identifying erroneous code bits. The simulation results show that the proposed algorithm significantly improves the errorcorrection performance of BPL decoding for medium and long codes. It is more than 0.25 d B better than the state-of-the-art BPL decoding at a block error rate(BLER) of 10^(-5), and outperforms CA-SCL decoding in the low signal-to-noise(SNR) region for(1024, 0.5)polar codes.
文摘BACKGROUND with the widespread application of computer network systems in the medical field,the plan-do-check-action(PDCA)and the international classification of diseases tenth edition(ICD-10)coding system have also achieved favorable results in clinical medical record management.However,research on their combined application is relatively lacking.Objective:it was to explore the impact of network systems and PDCA management mode on ICD-10 encoding.Material and Method:a retrospective collection of 768 discharged medical records from the Medical Record Management Department of Meishan People’s Hospital was conducted.They were divided into a control group(n=232)and an observation group(n=536)based on whether the PDCA management mode was implemented.The two sets of coding accuracy,time spent,case completion rate,satisfaction,and other indicators were compared.AIM To study the adoption of network and PDCA in the ICD-10.METHODS A retrospective collection of 768 discharged medical records from the Medical Record Management Department of Meishan People’s Hospital was conducted.They were divided into a control group(n=232)and an observation group(n=536)based on whether the PDCA management mode was implemented.The two sets of coding accuracy,time spent,case completion rate,satisfaction,and other indicators were compared.RESULTS In the 3,6,12,18,and 24 months of PDCA cycle management mode,the coding accuracy and medical record completion rate were higher,and the coding time was lower in the observation group as against the controls(P<0.05).The satisfaction of coders(80.22%vs 53.45%)and patients(84.89%vs 51.72%)in the observation group was markedly higher as against the controls(P<0.05).CONCLUSION The combination of computer networks and PDCA can improve the accuracy,efficiency,completion rate,and satisfaction of ICD-10 coding.
文摘This paper proposes an adaptive hybrid forward error correction(AH-FEC)coding scheme for coping with dynamic packet loss events in video and audio transmission.Specifically,the proposed scheme consists of a hybrid Reed-Solomon and low-density parity-check(RS-LDPC)coding system,combined with a Kalman filter-based adaptive algorithm.The hybrid RS-LDPC coding accommodates a wide range of code length requirements,employing RS coding for short codes and LDPC coding for medium-long codes.We delimit the short and medium-length codes by coding performance so that both codes remain in the optimal region.Additionally,a Kalman filter-based adaptive algorithm has been developed to handle dynamic alterations in a packet loss rate.The Kalman filter estimates packet loss rate utilizing observation data and system models,and then we establish the redundancy decision module through receiver feedback.As a result,the lost packets can be perfectly recovered by the receiver based on the redundant packets.Experimental results show that the proposed method enhances the decoding performance significantly under the same redundancy and channel packet loss.
基金supported by ZTE Industry-University-Institute Cooperation Funds.
文摘To improve the performance of video compression for machine vision analysis tasks,a video coding for machines(VCM)standard working group was established to promote standardization procedures.In this paper,recent advances in video coding for machine standards are presented and comprehensive introductions to the use cases,requirements,evaluation frameworks and corresponding metrics of the VCM standard are given.Then the existing methods are presented,introducing the existing proposals by category and the research progress of the latest VCM conference.Finally,we give conclusions.
基金supported by the Youth Science Foundation of Sichuan Province(Nos.22NSFSC3816 and 2022NSFSC1231)the General Project of the National Natural Science Foundation of China(Nos.12075039 and 41874121)the Key Project of the National Natural Science Foundation of China(No.U19A2086).
文摘Owing to the constraints on the fabrication ofγ-ray coding plates with many pixels,few studies have been carried out onγ-ray computational ghost imaging.Thus,the development of coding plates with fewer pixels is essential to achieveγ-ray computational ghost imaging.Based on the regional similarity between Hadamard subcoding plates,this study presents an optimization method to reduce the number of pixels of Hadamard coding plates.First,a moving distance matrix was obtained to describe the regional similarity quantitatively.Second,based on the matrix,we used two ant colony optimization arrangement algorithms to maximize the reuse of pixels in the regional similarity area and obtain new compressed coding plates.With full sampling,these two algorithms improved the pixel utilization of the coding plate,and the compression ratio values were 54.2%and 58.9%,respectively.In addition,three undersampled sequences(the Harr,Russian dolls,and cake-cutting sequences)with different sampling rates were tested and discussed.With different sampling rates,our method reduced the number of pixels of all three sequences,especially for the Russian dolls and cake-cutting sequences.Therefore,our method can reduce the number of pixels,manufacturing cost,and difficulty of the coding plate,which is beneficial for the implementation and application ofγ-ray computational ghost imaging.
基金supported in part by the National Key Research and Development Program of China under Grant 2018YFB1802303in part by the Zhejiang Provincial Natural Science Foundation of China under Grant LQ20F010010。
文摘Recently,a generalized successive cancellation list(SCL)decoder implemented with shiftedpruning(SP)scheme,namely the SCL-SP-ωdecoder,is presented for polar codes,which is able to shift the pruning window at mostωtimes during each SCL re-decoding attempt to prevent the correct path from being eliminated.The candidate positions for applying the SP scheme are selected by a shifting metric based on the probability that the elimination occurs.However,the number of exponential/logarithm operations involved in the SCL-SP-ωdecoder grows linearly with the number of information bits and list size,which leads to high computational complexity.In this paper,we present a detailed analysis of the SCL-SP-ωdecoder in terms of the decoding performance and complexity,which unveils that the choice of the shifting metric is essential for improving the decoding performance and reducing the re-decoding attempts simultaneously.Then,we introduce a simplified metric derived from the path metric(PM)domain,and a custom-tailored deep learning(DL)network is further designed to enhance the efficiency of the proposed simplified metric.The proposed metrics are both free of transcendental functions and hence,are more hardware-friendly than the existing metrics.Simulation results show that the proposed DL-aided metric provides the best error correction performance as comparison with the state of the art.
基金supported by the Fundamental Research Funds for the Central Universities (FRF-TP20-062A1)Guangdong Basic and Applied Basic Research Foundation (2021A1515110070)
文摘Belief propagation(BP)decoding outputs soft information and can be naturally used in iterative receivers.BP list(BPL)decoding provides comparable error-correction performance to the successive cancellation list(SCL)decoding.In this paper,we firstly introduce an enhanced code construction scheme for BPL decoding to improve its errorcorrection capability.Then,a GPU-based BPL decoder with adoption of the new code construction is presented.Finally,the proposed BPL decoder is tested on NVIDIA RTX3070 and GTX1060.Experimental results show that the presented BPL decoder with early termination criterion achieves above 1 Gbps throughput on RTX3070 for the code(1024,512)with 32 lists under good channel conditions.
文摘Background: Cause-of-death rankings are often used for planning or evaluating health policy measures. In the European Union, some countries produce cause-of-death statistics by a manual coding of death certificates, while other countries use an automated coding system. The outcome of these two different methods in terms of the selected underlying cause of death for statistics may vary considerably. Therefore, this study explores the effect of coding method on the ranking of countries by major causes of death. Method: Age and sex standardized rates were extracted for 33 European (related) countries from the cause-of-death registry of the European Statistical Office (Eurostat). Wilcoxon’s rank sum test was applied to the ranking of countries by major causes of death. Results: Statistically significant differences due to coding method were identified for dementia, stroke and pneumonia. These differences could be explained by a different selection of dementia or pneumonia as underlying cause of death and by a different certification practice for stroke. Conclusion: Coding method should be taken into account when constructing or interpreting rankings of countries by cause of death.
基金This work was supported by the National Key R&D Program of China(Grant No.2019YFB2205100)in part by Hubei Key Laboratory of Advanced Memories.
文摘Sparse coding is a prevalent method for image inpainting and feature extraction,which can repair corrupted images or improve data processing efficiency,and has numerous applications in computer vision and signal processing.Recently,sev-eral memristor-based in-memory computing systems have been proposed to enhance the efficiency of sparse coding remark-ably.However,the variations and low precision of the devices will deteriorate the dictionary,causing inevitable degradation in the accuracy and reliability of the application.In this work,a digital-analog hybrid memristive sparse coding system is pro-posed utilizing a multilevel Pt/Al_(2)O_(3)/AlO_(x)/W memristor,which employs the forward stagewise regression algorithm:The approxi-mate cosine distance calculation is conducted in the analog part to speed up the computation,followed by high-precision coeffi-cient updates performed in the digital portion.We determine that four states of the aforementioned memristor are sufficient for the processing of natural images.Furthermore,through dynamic adjustment of the mapping ratio,the precision require-ment for the digit-to-analog converters can be reduced to 4 bits.Compared to the previous system,our system achieves higher image reconstruction quality of the 38 dB peak-signal-to-noise ratio.Moreover,in the context of image inpainting,images containing 50%missing pixels can be restored with a reconstruction error of 0.0424 root-mean-squared error.
文摘Video games have been around for several decades and have had many advancements from the original start of video games. Video games started as virtual games that were advertised towards children, and these virtual games created a virtual reality of a variety of genres. These genres included sports games, such as tennis, football, baseball, war games, fantasy, puzzles, etc. The start of these games was derived from a sports genre and now has a popularity in multiplayer-online-shooting games. The purpose of this paper is to investigate different types of tools available for cheating in virtual world making players have undue advantage over other players in a competition. With the advancement in technology, these video games have become more expanded in the development aspects of gaming. Video game developers have created long lines of codes to create a new look of video games. As video games have progressed, the coding, bugs, bots, and errors of video games have changed throughout the years. The coding of video games has branched out from the original video games, which have given many benefits to this virtual world, while simultaneously creating more problems such as bots. Analysis of tools available for cheating in a game has disadvantaged normal gamer in a fair contest.
基金supported in part by the National Key R&D Program of China(No.2019YFB1803400)。
文摘For polar codes,the performance of successive cancellation list(SCL)decoding is capable of approaching that of maximum likelihood decoding.However,the existing hardware architectures for the SCL decoding suffer from high hardware complexity due to calculating L decoding paths simultaneously,which are unfriendly to the devices with limited logical resources,such as field programmable gate arrays(FPGAs).In this paper,we propose a list-serial pipelined hardware architecture with low complexity for the SCL decoding,where the serial calculation and the pipelined operation are elegantly combined to strike a balance between the complexity and the latency.Moreover,we employ only one successive cancellation(SC)decoder core without L×L crossbars,and reduce the number of inputs of the metric sorter from 2L to L+2.Finally,the FPGA implementations show that the hardware resource consumption is significantly reduced with negligible decoding performance loss.
文摘To support mission-critical applications, such as factory automation and autonomous driving, the ultra-reliable low latency communications (URLLC) is adopted in the fifth generation (5G) mobile communications network, which requires high level of reliability and low latency. Naturally, URLLC in the future 6G is expected to have a better capability than its 5G version which poses an unprecedented challenge to us. Fortunately, the potential solution can still be found in the well-known classical Shannon information theory. Since the latency constraint can be represented equivalently by blocklength, channel coding at finite blocklength plays an important role in the theoretic analysis of URLLC. Applying these achievements in rapidly development of massive MIMO techniques gives rise to a new theory on space time exchanging. It tells us that channel coding can also be performed in space domain, since it is capable of providing the same coding rate as that in time domain. This space time exchanging theory points out an exciting and feasible direction for us to further reduce latency in 6G URLLC. .
文摘Activation functions play an essential role in converting the output of the artificial neural network into nonlinear results,since without this nonlinearity,the results of the network will be less accurate.Nonlinearity is the mission of all nonlinear functions,except for polynomials.The activation function must be dif-ferentiable for backpropagation learning.This study’s objective is to determine the best activation functions for the approximation of each fractal image.Different results have been attained using Matlab and Visual Basic programs,which indi-cate that the bounded function is more helpful than other functions.The non-lin-earity of the activation function is important when using neural networks for coding fractal images because the coefficients of the Iterated Function System are different according to the different types of fractals.The most commonly cho-sen activation function is the sigmoidal function,which produces a positive value.Other functions,such as tansh or arctan,whose values can be positive or negative depending on the network input,tend to train neural networks faster.The coding speed of the fractal image is different depending on the appropriate activation function chosen for each fractal shape.In this paper,we have provided the appro-priate activation functions for each type of system of iterated functions that help the network to identify the transactions of the system.
文摘In today’s information technology(IT)world,the multi-hop wireless sensor networks(MHWSNs)are considered the building block for the Internet of Things(IoT)enabled communication systems for controlling everyday tasks of organizations and industry to provide quality of service(QoS)in a stipulated time slot to end-user over the Internet.Smart city(SC)is an example of one such application which can automate a group of civil services like automatic control of traffic lights,weather prediction,surveillance,etc.,in our daily life.These IoT-based networks with multi-hop communication and multiple sink nodes provide efficient communication in terms of performance parameters such as throughput,energy efficiency,and end-to-end delay,wherein low latency is considered a challenging issue in next-generation networks(NGN).This paper introduces a single and parallels stable server queuing model with amulti-class of packets and native and coded packet flowto illustrate the simple chain topology and complexmultiway relay(MWR)node with specific neighbor topology.Further,for improving data transmission capacity inMHWSNs,an analytical framework for packet transmission using network coding at the MWR node in the network layer with opportunistic listening is performed by considering bi-directional network flow at the MWR node.Finally,the accuracy of the proposed multi-server multi-class queuing model is evaluated with and without network coding at the network layer by transmitting data packets.The results of the proposed analytical framework are validated and proved effective by comparing these analytical results to simulation results.