Low Complexity Successive Cancellation List Decoding of U-UV Codes

Constituted by BCH component codes and its ordered statistics decoding(OSD),the successive cancellation list(SCL)decoding of U-UV structural codes can provide competent error-correction performance in the short-to-medium length regime.However,this list decoding complexity becomes formidable as the decoding output list size increases.This is primarily incurred by the OSD.Addressing this challenge,this paper proposes the low complexity SCL decoding through reducing the complexity of component code decoding,and pruning the redundant SCL decoding paths.For the former,an efficient skipping rule is introduced for the OSD so that the higher order decoding can be skipped when they are not possible to provide a more likely codeword candidate.It is further extended to the OSD variant,the box-andmatch algorithm(BMA),in facilitating the component code decoding.Moreover,through estimating the correlation distance lower bounds(CDLBs)of the component code decoding outputs,a path pruning(PP)-SCL decoding is proposed to further facilitate the decoding of U-UV codes.In particular,its integration with the improved OSD and BMA is discussed.Simulation results show that significant complexity reduction can be achieved.Consequently,the U-UV codes can outperform the cyclic redundancy check(CRC)-polar codes with a similar decoding complexity.

Text-and-Timbre-Based Speech Semantic Coding for Ultra-Low-Bitrate Communications

To address the contradiction between the explosive growth of wireless data and the limited spectrum resources,semantic communication has been emerging as a promising communication paradigm.In this paper,we thus design a speech semantic coded communication system,referred to as Deep-STS(i.e.,Deep-learning based Speech To Speech),for the lowbandwidth speech communication.Specifically,we first deeply compress the speech data through extracting the textual information from the speech based on the conformer encoder and connectionist temporal classification decoder at the transmitter side of Deep-STS system.In order to facilitate the final speech timbre recovery,we also extract the short-term timbre feature of speech signals only for the starting 2s duration by the long short-term memory network.Then,the Reed-Solomon coding and hybrid automatic repeat request protocol are applied to improve the reliability of transmitting the extracted text and timbre feature over the wireless channel.Third,we reconstruct the speech signal by the mel spectrogram prediction network and vocoder,when the extracted text is received along with the timbre feature at the receiver of Deep-STS system.Finally,we develop the demo system based on the USRP and GNU radio for the performance evaluation of Deep-STS.Numerical results show that the ac-Received:Jan.17,2024 Revised:Jun.12,2024 Editor:Niu Kai curacy of text extraction approaches 95%,and the mel cepstral distortion between the recovered speech signal and the original one in the spectrum domain is less than 10.Furthermore,the experimental results show that the proposed Deep-STS system can reduce the total delay of speech communication by 85%on average compared to the G.723 coding at the transmission rate of 5.4 kbps.More importantly,the coding rate of the proposed Deep-STS system is extremely low,only 0.2 kbps for continuous speech communication.It is worth noting that the Deep-STS with lower coding rate can support the low-zero-power speech communication,unveiling a new era in ultra-efficient coded communications.

Intrusion Detection Model Using Chaotic MAP for Network Coding Enabled Mobile Small Cells

Wireless Network security management is difficult because of the ever-increasing number of wireless network malfunctions,vulnerabilities,and assaults.Complex security systems,such as Intrusion Detection Systems(IDS),are essential due to the limitations of simpler security measures,such as cryptography and firewalls.Due to their compact nature and low energy reserves,wireless networks present a significant challenge for security procedures.The features of small cells can cause threats to the network.Network Coding(NC)enabled small cells are vulnerable to various types of attacks.Avoiding attacks and performing secure“peer”to“peer”data transmission is a challenging task in small cells.Due to the low power and memory requirements of the proposed model,it is well suited to use with constrained small cells.An attacker cannot change the contents of data and generate a new Hashed Homomorphic Message Authentication Code(HHMAC)hash between transmissions since the HMAC function is generated using the shared secret.In this research,a chaotic sequence mapping based low overhead 1D Improved Logistic Map is used to secure“peer”to“peer”data transmission model using lightweight H-MAC(1D-LM-P2P-LHHMAC)is proposed with accurate intrusion detection.The proposed model is evaluated with the traditional models by considering various evaluation metrics like Vector Set Generation Accuracy Levels,Key Pair Generation Time Levels,Chaotic Map Accuracy Levels,Intrusion Detection Accuracy Levels,and the results represent that the proposed model performance in chaotic map accuracy level is 98%and intrusion detection is 98.2%.The proposed model is compared with the traditional models and the results represent that the proposed model secure data transmission levels are high.

A quantum blind signature scheme based on dense coding for non-entangled states

In some schemes, quantum blind signatures require the use of difficult-to-prepare multiparticle entangled states. By considering the communication overhead, quantum operation complexity, verification efficiency and other relevant factors in practical situations, this article proposes a non-entangled quantum blind signature scheme based on dense encoding. The information owner utilizes dense encoding and hash functions to blind the information while reducing the use of quantum resources. After receiving particles, the signer encrypts the message using a one-way function and performs a Hadamard gate operation on the selected single photon to generate the signature. Then the verifier performs a Hadamard gate inverse operation on the signature and combines it with the encoding rules to restore the message and complete the verification.Compared with some typical quantum blind signature protocols, this protocol has strong blindness in privacy protection,and higher flexibility in scalability and application. The signer can adjust the signature operation according to the actual situation, which greatly simplifies the complexity of the signature. By simultaneously utilizing the secondary distribution and rearrangement of non-entangled quantum states, a non-entangled quantum state representation of three bits of classical information is achieved, reducing the use of a large amount of quantum resources and lowering implementation costs. This improves both signature verification efficiency and communication efficiency while, at the same time, this scheme meets the requirements of unforgeability, non-repudiation, and prevention of information leakage.

Single Photon Detection Technology in Underwater Wireless Optical Communication:Modulation Modes and Error Correction Coding Analysis

This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.

On Zero Dynamics and Controllable Cyber-Attacks in Cyber-Physical Systems and Dynamic Coding Schemes as Their Countermeasures

In this paper, we study stealthy cyber-attacks on actuators of cyber-physical systems(CPS), namely zero dynamics and controllable attacks. In particular, under certain assumptions, we investigate and propose conditions under which one can execute zero dynamics and controllable attacks in the CPS. The above conditions are derived based on the Markov parameters of the CPS and elements of the system observability matrix. Consequently, in addition to outlining the number of required actuators to be attacked, these conditions provide one with the minimum system knowledge needed to perform zero dynamics and controllable cyber-attacks. As a countermeasure against the above stealthy cyber-attacks, we develop a dynamic coding scheme that increases the minimum number of the CPS required actuators to carry out zero dynamics and controllable cyber-attacks to its maximum possible value. It is shown that if at least one secure input channel exists, the proposed dynamic coding scheme can prevent adversaries from executing the zero dynamics and controllable attacks even if they have complete knowledge of the coding system. Finally, two illustrative numerical case studies are provided to demonstrate the effectiveness and capabilities of our derived conditions and proposed methodologies.

Improved Segmented Belief Propagation List Decoding for Polar Codes with Bit-Flipping

Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved segmented belief propagation list decoding based on bit flipping(SBPL-BF) is proposed. On the one hand, the proposed algorithm makes use of the cooperative characteristic in BPL decoding such that the codeword is decoded in different BP decoders. Based on this characteristic, the unreliable bits for flipping could be split into multiple subblocks and could be flipped in different decoders simultaneously. On the other hand, a more flexible and effective processing strategy for the priori information of the unfrozen bits that do not need to be flipped is designed to improve the decoding convergence. In addition, this is the first proposal in BPL decoding which jointly optimizes the bit flipping of the information bits and the code bits. In particular, for bit flipping of the code bits, a H-matrix aided bit-flipping algorithm is designed to enhance the accuracy in identifying erroneous code bits. The simulation results show that the proposed algorithm significantly improves the errorcorrection performance of BPL decoding for medium and long codes. It is more than 0.25 d B better than the state-of-the-art BPL decoding at a block error rate(BLER) of 10^(-5), and outperforms CA-SCL decoding in the low signal-to-noise(SNR) region for(1024, 0.5)polar codes.

Angular-tunable on-chip coding metasurface enabled by phase-change material with immersion liquid

Metasurfaces provide a potent platform for the dynamic manipulation of electromagnetic waves.Cou⁃pled with phase-change materials,they facilitate the creation of versatile metadevices,showcasing various tun⁃able functions based on the transition between amorphous and crystalline states.However,the inherent limitation in tunable states imposes constraints on the multiplexing channels of metadevices.Here,this paper introduces a novel approach-a multi-functional metadevice achieved through the two-level control of the encoding phasechange metaatoms.Utilizing the phase-change material Ge_(2)Sb_(2)Se_(4)Te1(GSST)and high refractive-index liquid di⁃iodomethane(CH_(2)I_(2)),this paper showcases precise control over electromagnetic wave manipulation.The GSST state governs the tunable function,switching it ON and OFF,while the presence of liquid in the hole dictates the deflection angle when the tunable function is active.Importantly,our tunable coding metasurface exhibits robust performance across a broad wavelength spectrum.The incorporation of high refractive-index liquid extends the regulatory dimension of the metadevice,enabling dynamic switching of encoding bit levels.This two-level tun⁃able metadevice,rooted in phase-change materials,presents a promising avenue for the dynamic control of func⁃tions.

Adoption of network and plan-do-check-action in the international classification of disease 10 coding

BACKGROUND with the widespread application of computer network systems in the medical field,the plan-do-check-action(PDCA)and the international classification of diseases tenth edition(ICD-10)coding system have also achieved favorable results in clinical medical record management.However,research on their combined application is relatively lacking.Objective:it was to explore the impact of network systems and PDCA management mode on ICD-10 encoding.Material and Method:a retrospective collection of 768 discharged medical records from the Medical Record Management Department of Meishan People’s Hospital was conducted.They were divided into a control group(n=232)and an observation group(n=536)based on whether the PDCA management mode was implemented.The two sets of coding accuracy,time spent,case completion rate,satisfaction,and other indicators were compared.AIM To study the adoption of network and PDCA in the ICD-10.METHODS A retrospective collection of 768 discharged medical records from the Medical Record Management Department of Meishan People’s Hospital was conducted.They were divided into a control group(n=232)and an observation group(n=536)based on whether the PDCA management mode was implemented.The two sets of coding accuracy,time spent,case completion rate,satisfaction,and other indicators were compared.RESULTS In the 3,6,12,18,and 24 months of PDCA cycle management mode,the coding accuracy and medical record completion rate were higher,and the coding time was lower in the observation group as against the controls(P<0.05).The satisfaction of coders(80.22%vs 53.45%)and patients(84.89%vs 51.72%)in the observation group was markedly higher as against the controls(P<0.05).CONCLUSION The combination of computer networks and PDCA can improve the accuracy,efficiency,completion rate,and satisfaction of ICD-10 coding.

The Application of Nicotiana benthamiana as a Transient Expression Host to Clone the Coding Sequences of Plant Genes

Coding sequences (CDS) are commonly used for transient gene expression, in yeast two-hybrid screening, to verify protein interactions and in prokaryotic gene expression studies. CDS are most commonly obtained using complementary DNA (cDNA) derived from messenger RNA (mRNA) extracted from plant tissues and generated by reverse transcription. However, some CDS are difficult to acquire through this process as they are expressed at extremely low levels or have specific spatial and/or temporal expression patterns in vivo. These challenges require the development of alternative CDS cloning technologies. In this study, we found that the genomic intron-containing gene coding sequences (gDNA) from Arabidopsis thaliana, Oryza sativa, Brassica napus, and Glycine max can be correctly transcribed and spliced into mRNA in Nicotiana benthamiana. In contrast, gDNAs from Triticum aestivum and Sorghum bicolor did not function correctly. In transient expression experiments, the target DNA sequence is driven by a constitutive promoter. Theoretically, a sufficient amount of mRNA can be extracted from the N. benthamiana leaves, making it conducive to the cloning of CDS target genes. Our data demonstrate that N. benthamiana can be used as an effective host for the cloning CDS of plant genes.

Index modulation aided generalized space-time block coding:A unified MIMO framework

In this paper,Index Modulation(IM)aided Generalized Space-Time Block Coding(GSTBC)is proposed,which intrinsically exploits the benefits of IM concept,diversity gain and spatial multiplexing gain.Specifically,the information bits are partitioned into U groups,with each being modulated by IM symbols(i.e.Spatial Modulation(SM),Quadrature SM(QSM),etc).Next,the structure of GSTBC is invoked for each K IM symbol,and a total ofμ=U/K GSTBC codes are transmitted via T time slots.A Block Expectation Propagation(B-EP)detector is designed for the proposed IM-GSTBC structure.Moreover,the theoretical Average Bit Error Probability(ABEP)is derived for our IM-GSTBC system,which is confirmed by the simulation results and helpful for performance evaluation.Simulation results show that our proposed IM-GSTBC system is capable of striking an efficient trade-off between spatial multiplexing gain,spatial diversity gain as well as implementation cost imposed for both small-scale and large-scale MIMO antenna configurations.

Recent Advances in Video Coding for Machines Standard and Technologies

To improve the performance of video compression for machine vision analysis tasks,a video coding for machines(VCM)standard working group was established to promote standardization procedures.In this paper,recent advances in video coding for machine standards are presented and comprehensive introductions to the use cases,requirements,evaluation frameworks and corresponding metrics of the VCM standard are given.Then the existing methods are presented,introducing the existing proposals by category and the research progress of the latest VCM conference.Finally,we give conclusions.

Research on Big Data Coding System Based on the Classification of Artificial Materials and Mechanical Equipment in Construction Engineering

By analyzing and comparing the current application status and advantages and disadvantages of domestic and foreign artificial material mechanical equipment classification coding systems,and conducting a comparative study of the existing coding system standards in different regions of the country,a coding data model suitable for big data research needs is proposed based on the current national standard for artificial material mechanical equipment classification coding.This model achieves a horizontal connection of characteristics and a vertical penetration of attribute values for construction materials and machinery through forward automatic coding calculation and reverse automatic decoding.This coding scheme and calculation model can also establish a database file for the coding and unit price of construction materials and machinery,forming a complete big data model for construction material coding unit prices.This provides foundational support for calculating and analyzing big data related to construction material unit prices,real-time information prices,market prices,and various comprehensive prices,thus contributing to the formation of cost-related big data.

Improved Adaptive Random Convolutional Network Coding Algorithm

To address the issue of field size in random network coding, we propose an Improved Adaptive Random Convolutional Network Coding (IARCNC) algorithm to considerably reduce the amount of occupied memory. The operation of IARCNC is similar to that of Adaptive Random Convolutional Network Coding (ARCNC), with the coefficients of local encoding kernels chosen uniformly at random over a small finite field. The difference is that the length of the local encoding kernels at the nodes used by IARCNC is constrained by the depth; meanwhile, increases until all the related sink nodes can be decoded. This restriction can make the code length distribution more reasonable. Therefore, IARCNC retains the advantages of ARCNC, such as a small decoding delay and partial adaptation to an unknown topology without an early estimation of the field size. In addition, it has its own advantage, that is, a higher reduction in memory use. The simulation and the example show the effectiveness of the proposed algorithm.

Soft Decoding Scheme of Convolution Code Combined with Huffman Coding

This paper proposes a modification of the soft output Viterbi decoding algorithm (SOVA) which combines convolution code with Huffman coding. The idea is to extract the bit probability information from the Huffman coding and use it to compute the a priori source information which can be used when the channel environment is bad. The suggested scheme does not require changes on the transmitter side. Compared with separate decoding systems, the gain in signal to noise ratio is about 0 5-1.0 dB with a limi...

Fast Inter Coding Mode Selection Algorithm for H.264

In order to reduce the encoding complexity of macroblock coding mode decision in H.264/AVC, a selective smaller block-size searching algorithm and a selective intra coding mode searching algorithm are proposed by using the high correlation among coding modes and in spatial and temporal domains of video sequence. Simulation results demonstrate that the proposed algorithm can provide significant improvement in computational requirement, with negligible small picture quality degradation and slight bit rate increase.

WAVELET-BASED FINE GRANULARITY SCALABLE VIDEO CODING

This letter proposes an efficient wavelet-based Fine Granularity Scalable (FGS)coding scheme, where the base layer is encoded with a newly designed wavelet-based coder, and the enhancement layer is encoded with Progressive Fine Granularity Scalable (PFGS) coding.This algorithm involves multi-frame motion compensation, rate-distortion optimizing strategy with Lagrangian cost function and context-based adaptive arithmetic coding. In order to improve efficiency of the enhancement layer coding, an improved motion estimation scheme that uses both information from the base layer and the enhancement layer is also proposed in this letter. The wavelet-based coder significantly improves the coding efficiency of the base layer compared with MPEG-4 ASP (Advanced Simple Profile) and H.26L TML9. The PFGS coding is a significant improvement over MPEG-4 FGS coding at the enhancement layer. Experiments show that single layer coding efficiency gain of the proposed scheme is about 2.0-3.0dB and 0.3-1.0dB higher than that of MPEG-4 ASP and H.26L TML9, respectively. The overall coding efficiency gain of the proposed scheme is about 4.0-5.0dB higher than that of MPEG-4 FGS.

Error Resilient Video Communication Based on Picture Level Adaptive Frame / Field Coding

Packet loss protection method based on picture level adaptive frame /field coding (PAFF)was presented. Firstly,the end-to-end rate-distortion analysis for PAFF on the current frame was performed. Secondly,in order to evaluate the severity of error propagation in the following frames,the error propagation intensity and human visual quality sensitivity of different areas were taken into consideration. It was followed by the quantification of relative importance. Finally,the proper coding mode was chosen utilizing an unequal comparison procedure. The simulation results show that the proposed method can improve peak signal-to-noise ratio (PSNR) up to 0. 9 dB and 1. 6 dB comparing with the field only and the dispersed flexible macro-block ordering (FMO)only methods respectively.

Screen Content Coding with Primary and Secondary Reference Buffers for String Matching and Copying

A screen content coding （SCC） algorithm that uses a primary reference buffer （PRB） and a secondary reference buffer （SRB） for string matching and string copying is proposed. PRB is typically the traditional reconstructed picture buffer which provides reference string pixels for the current pixels being coded. SRB stores a few of recently and frequently referenced pixels for repetitive reference by the current pixels being coded. In the encoder, searching of optimal reference string is performed in both PRB and SRB, and either a PRB or SRB string is selected as an optimal reference string on a string-by-string basis. Compared with HM-16.4＋SCM-40 reference software, the proposed SCC algorithm can improve coding performance measured by bit-distortion rate reduction of average 4.19% in all-intra configuration for text and graphics with motion category＇ of test sequences defined by JCT-VC common test condition.

Decoding topological XYZ^(2) codes with reinforcement learning based on attention mechanisms

Quantum error correction, a technique that relies on the principle of redundancy to encode logical information into additional qubits to better protect the system from noise, is necessary to design a viable quantum computer. For this new topological stabilizer code-XYZ^(2) code defined on the cellular lattice, it is implemented on a hexagonal lattice of qubits and it encodes the logical qubits with the help of stabilizer measurements of weight six and weight two. However topological stabilizer codes in cellular lattice quantum systems suffer from the detrimental effects of noise due to interaction with the environment. Several decoding approaches have been proposed to address this problem. Here, we propose the use of a state-attention based reinforcement learning decoder to decode XYZ^(2) codes, which enables the decoder to more accurately focus on the information related to the current decoding position, and the error correction accuracy of our reinforcement learning decoder model under the optimisation conditions can reach 83.27% under the depolarizing noise model, and we have measured thresholds of 0.18856 and 0.19043 for XYZ^(2) codes at code spacing of 3–7 and 7–11, respectively. our study provides directions and ideas for applications of decoding schemes combining reinforcement learning attention mechanisms to other topological quantum error-correcting codes.