Quantitative Analysis of Seeing with Height and Time at Muztagh-Ata Site Based on ERA5 Database

Seeing is an important index to evaluate the quality of an astronomical site.To estimate seeing at the Muztagh-Ata site with height and time quantitatively,the European Centre for Medium-Range Weather Forecasts reanalysis database(ERA5)is used.Seeing calculated from ERA5 is compared consistently with the Differential Image Motion Monitor seeing at the height of 12 m.Results show that seeing decays exponentially with height at the Muztagh-Ata site.Seeing decays the fastest in fall in 2021 and most slowly with height in summer.The seeing condition is better in fall than in summer.The median value of seeing at 12 m is 0.89 arcsec,the maximum value is1.21 arcsec in August and the minimum is 0.66 arcsec in October.The median value of seeing at 12 m is 0.72arcsec in the nighttime and 1.08 arcsec in the daytime.Seeing is a combination of annual and about biannual variations with the same phase as temperature and wind speed indicating that seeing variation with time is influenced by temperature and wind speed.The Richardson number Ri is used to analyze the atmospheric stability and the variations of seeing are consistent with Ri between layers.These quantitative results can provide an important reference for a telescopic observation strategy.

Observation and Analysis of VLF Nocturnal Multimode Interference Phenomenon based on Waveguide Mode Theory

Very low frequency(VLF)signals are propagated between the ground-ionosphere.Multimode interference will cause the phase to show oscillatory changes with distance while propagating at night,leading to abnormalities in the received VLF signal.This study uses the VLF signal received in Qingdao City,Shandong Province,from the Russian Alpha navigation system to explore the multimode interference problem of VLF signal propagation.The characteristics of the effect of multimode interference phenomena on the phase are analyzed according to the variation of the phase of the VLF signal.However,the phase of VLF signals will also be affected by the X-ray and energetic particles that are released during the eruption of solar flares,therefore the two phenomena are studied in this work.It is concluded that the X-ray will not affect the phase of VLF signals at night,but the energetic particles will affect the phase change,and the influence of energetic particles should be excluded in the study of multimode interference phenomena.Using VLF signals for navigation positioning in degraded or unavailable GPS conditions is of great practical significance for VLF navigation systems as it can avoid the influence of multimode interference and improve positioning accuracy.

Machine Learning-based Identification of Contaminated Images in Light Curve Data Preprocessing

Attitude is one of the crucial parameters for space objects and plays a vital role in collision prediction and debris removal.Analyzing light curves to determine attitude is the most commonly used method.In photometric observations,outliers may exist in the obtained light curves due to various reasons.Therefore,preprocessing is required to remove these outliers to obtain high quality light curves.Through statistical analysis,the reasons leading to outliers can be categorized into two main types:first,the brightness of the object significantly increases due to the passage of a star nearby,referred to as“stellar contamination,”and second,the brightness markedly decreases due to cloudy cover,referred to as“cloudy contamination.”The traditional approach of manually inspecting images for contamination is time-consuming and labor-intensive.However,we propose the utilization of machine learning methods as a substitute.Convolutional Neural Networks and SVMs are employed to identify cases of stellar contamination and cloudy contamination,achieving F1 scores of 1.00 and 0.98 on a test set,respectively.We also explore other machine learning methods such as ResNet-18 and Light Gradient Boosting Machine,then conduct comparative analyses of the results.

A Localization Method of High Energy Transients for All-sky Gamma-ray Monitor

Fast and reliable localization of high-energy transients is crucial for characterizing the burst properties and guiding the follow-up observations.Localization based on the relative counts of different detectors has been widely used for all-sky gamma-ray monitors.There are two major methods for this count distribution localization:χ^(2)minimization method and the Bayesian method.Here we propose a modified Bayesian method that could take advantage of both the accuracy of the Bayesian method and the simplicity of the χ^(2)method.With comprehensive simulations,we find that our Bayesian method with Poisson likelihood is generally more applicable for various bursts than the χ^(2)method,especially for weak bursts.We further proposed a location-spectrum iteration approach based on the Bayesian inference,which could alleviate the problems caused by the spectral difference between the burst and location templates.Our method is very suitable for scenarios with limited computation resources or timesensitive applications,such as in-flight localization software,and low-latency localization for rapidly follow-up observations.

Fast Two-dimensional Positioning Method of Crab Pulsar Based on Multiple Optimization Algorithms

In the two-dimensional positioning method of pulsars, the grid method is used to provide non-sensitive direction and positional estimates. However, the grid method has a high computational load and low accuracy due to the interval of the grid. To improve estimation accuracy and reduce the computational load, we propose a fast twodimensional positioning method for the crab pulsar based on multiple optimization algorithms(FTPCO). The FTPCO uses the Levenberg–Marquardt(LM) algorithm, three-point orientation(TPO) method, particle swarm optimization(PSO) and Newton–Raphson-based optimizer(NRBO) to substitute the grid method. First, to avoid the influence of the non-sensitive direction on positioning, we take an orbital error and the distortion of the pulsar profile as optimization objectives and combine the grid method with the LM algorithm or PSO to search for the non-sensitive direction. Then, on the sensitive plane perpendicular to the non-sensitive direction, the TPO method is proposed to fast search the sensitive direction and sub-sensitive direction. Finally, the NRBO is employed on the sensitive and sub-sensitive directions to achieve two-dimensional positioning of the Crab pulsar. The simulation results show that the computational load of the FTPCO is reduced by 89.4% and the positioning accuracy of the FTPCO is improved by approximately 38% compared with the grid method. The FTPCO has the advantage of high real-time accuracy and does not fall into the local optimum.

PSRDP:A Parallel Processing Method for Pulsar Baseband Data

To address the problem of real-time processing of ultra-wide bandwidth pulsar baseband data,we designed and implemented a pulsar baseband data processing algorithm(PSRDP)based on GPU parallel computing technology.PSRDP can perform operations such as baseband data unpacking,channel separation,coherent dedispersion,Stokes detection,phase and folding period prediction,and folding integration in GPU clusters.We tested the algorithm using the J0437-4715 pulsar baseband data generated by the CASPSR and Medusa backends of the Parkes,and the J0332+5434 pulsar baseband data generated by the self-developed backend of the Nan Shan Radio Telescope.We obtained the pulse profiles of each baseband data.Through experimental analysis,we have found that the pulse profiles generated by the PSRDP algorithm in this paper are essentially consistent with the processing results of Digital Signal Processing Software for Pulsar Astronomy(DSPSR),which verified the effectiveness of the PSRDP algorithm.Furthermore,using the same baseband data,we compared the processing speed of PSRDP with DSPSR,and the results showed that PSRDP was not slower than DSPSR in terms of speed.The theoretical and technical experience gained from the PSRDP algorithm research in this article lays a technical foundation for the real-time processing of QTT(Qi Tai radio Telescope)ultra-wide bandwidth pulsar baseband data.

Method of Phase Diagrams for the Analysis of Seism-Acoustical Spatial-Time Monitoring Data in Oil Wells

Experimental and theoretical studies of the mechanisms of vibration stimulation of oil recovery in watered fields lead to the conclusion that resonance oscillations develop in fractured-block formations. These oscillations, caused by weak but long-lasting and frequency-stable influences, create the conditions for ultrasonic wave’s generation in the layers, which are capable of destroying thickened oil membranes in reservoir cracks. For fractured-porous reservoirs in the process of exploitation by the method of water high-pressure oil displacement, the possibility of intensifying ultrasonic vibrations can have an important technological significance. Even a very weak ultrasound can destroy, over a long period of time, the viscous oil membranes formed in the cracks between the blocks, which can be the reason for lowering the permeability of the layers and increasing the oil recovery. To describe these effects, it is necessary to consider the wave process in a hierarchically blocky environment and theoretically simulate the mechanism of the appearance of self-oscillations under the action of relaxation shear stresses. For the analysis of seism acoustic response in time on fixed intervals along the borehole an algorithm of phase diagrams of the state of many-phase medium is suggested.

Systematic Review of Graphical Visual Methods in Honeypot Attack Data Analysis

Mitigating increasing cyberattack incidents may require strategies such as reinforcing organizations’ networks with Honeypots and effectively analyzing attack traffic for detection of zero-day attacks and vulnerabilities. To effectively detect and mitigate cyberattacks, both computerized and visual analyses are typically required. However, most security analysts are not adequately trained in visualization principles and/or methods, which is required for effective visual perception of useful attack information hidden in attack data. Additionally, Honeypot has proven useful in cyberattack research, but no studies have comprehensively investigated visualization practices in the field. In this paper, we reviewed visualization practices and methods commonly used in the discovery and communication of attack patterns based on Honeypot network traffic data. Using the PRISMA methodology, we identified and screened 218 papers and evaluated only 37 papers having a high impact. Most Honeypot papers conducted summary statistics of Honeypot data based on static data metrics such as IP address, port, and packet size. They visually analyzed Honeypot attack data using simple graphical methods (such as line, bar, and pie charts) that tend to hide useful attack information. Furthermore, only a few papers conducted extended attack analysis, and commonly visualized attack data using scatter and linear plots. Papers rarely included simple yet sophisticated graphical methods, such as box plots and histograms, which allow for critical evaluation of analysis results. While a significant number of automated visualization tools have incorporated visualization standards by default, the construction of effective and expressive graphical methods for easy pattern discovery and explainable insights still requires applied knowledge and skill of visualization principles and tools, and occasionally, an interdisciplinary collaboration with peers. We, therefore, suggest the need, going forward, for non-classical graphical methods for visualizing attack patterns and communicating analysis results. We also recommend training investigators in visualization principles and standards for effective visual perception and presentation.

Pulsar Candidate Classification Using a Computer Vision Method from a Combination of Convolution and Attention

Artificial intelligence methods are indispensable to identifying pulsars from large amounts of candidates.We develop a new pulsar identification system that utilizes the CoAtNet to score two-dimensional features of candidates,implements a multilayer perceptron to score one-dimensional features,and relies on logistic regression to judge the corresponding scores.In the data preprocessing stage,we perform two feature fusions separately,one for one-dimensional features and the other for two-dimensional features,which are used as inputs for the multilayer perceptron and the CoAtNet respectively.The newly developed system achieves 98.77%recall,1.07%false positive rate(FPR)and 98.85%accuracy in our GPPS test set.

Fractal Method for Statistical Analysis Geological Data

This paper establishes the phase space in the light of spacial series data , discusses the fractal structure of geological data in terms of correlated functions and studies the chaos of these data . In addition , it introduces the R/S analysis for time series analysis into spacial series to calculate the structural fractal dimensions of ranges and standard deviation for spacial series data -and to establish the fractal dimension matrix and the procedures in plotting the fractal dimension anomaly diagram with vector distances of fractal dimension . At last , it has examples of its application .

A New Method of Frequency Fluctuation Estimation and IPS Processing Results Based on the Downlink Signal of Tianwen-1

The radio-occultation observations taken by Tianwen-1 are aiming to study the properties of solar wind.A new method of frequency fluctuation(FF)estimation is presented for processing the down-link signals of Tianwen-1 during the occultation period to study the properties of the coronal plasma at the heliocentric distances of 4.48–19 R_(⊙).Because of low S/N as well as the phase fluctuation phenomena caused by solar activity,a Kalman based on polynomial prediction methods is proposed to avoid the phase locked loop loss lock.A new detrend method based on multi-level iteration correction is proposed to estimate Doppler shift to get more accurate power density spectra of FF in the low frequency region.The data analyze procedure is used to get the properties of the solar corona during the occultation.The method was finally verified at the point when the solar offset is 5.7 R_(⊙),frequency tracking was successfully performed on data with a carrier-to-noise ratio of about 28 dBHz.The density spectra obtained by the improved method are basically the same when the frequency is greater than 2 mHz,the uncertainty in the result of the rms of the FF obtained by removing the trend term with different order polynomials is less than 3.3%.The data without eliminating interference show a large error for different detrending orders,which justifies the need for an improved approach.Finally,the frequency fluctuation results combined with the information on intensity fluctuation obtained by the new method are compared with the results of the integrated Space Weather Analysis system and theoretical formula,which verifies that the processing results in this paper have a certain degree of credibility.

Extraction and Analysis of Coronal High-temperature Components Based on Outlier Detection

The extraction of high-temperature regions in active regions(ARs)is an important means to help understand the mechanism of coronal heating.The important observational means of high-temperature radiation in ARs is the main emission line of Fe XVⅢin the 94?of the Atmospheric Imaging Assembly.However,the diagnostic algorithms for Fe XVⅢ,including the differential emission measure(DEM)and linear diagnostics proposed by Del based on the DEM,have been greatly limited for a long time,and the results obtained are different from the predictions.In this paper,we use the outlier detection method to establish the nonlinear correlation between 94?and 171,193,211?based on the former researches by others.A neural network based on 171,193,211?is constructed to replace the low-temperature emission lines in the ARs of 94?.The predicted results are regarded as the low-temperature components of 94?,and then the predicted results are subtracted from 94?to obtain the outlier component of 94?,or Fe XVⅢ.Then,the outlier components obtained by neural network are compared with the Fe XVⅢobtained by DEM and Del's method,and a high similarity is found,which proves the reliability of neural network to obtain the high-temperature components of ARs,but there are still many differences.In order to analyze the differences between the Fe XVⅢobtained by the three methods,we subtract the Fe XVⅢobtained by the DEM and Del's method from the Fe XVⅢobtained by the neural network to obtain the residual value,and compare it with the results of Fe XIV in the temperature range of 6.1-6.45 MK.It is found that there is a great similarity,which also shows that the Fe XVⅢobtained by DEM and Del's method still has a large low-temperature component dominated by Fe XIV,and the Fe XVⅢobtained by neural network is relatively pure.

Test for random in electrical signals time series of CO_2 short circuit transition welding process by the method of surrogate data

This paper introduced the basic theory and algorithm of the surrogate data method, which proposed a rigorous way to detect the random and seemingly stochastic characteristics in a system. The Gaussian data and the Rossler data were used to show the availability and effectivity of this method. According to the analysis by this method based on the short-circuiting current signals under the conditions of the same voltage and different wire feed speeds, it is demonstrated that the electrical signals time series exhibit apparently randomness when the welding parameters do not match. However, the electrical signals time series are deterministic when a match is found. The stability of short-circuiting transfer process could be judged exactly by the method of surrogate data.

Leveraging the Empirical Wavelet Transform in Combination with Convolutional LSTM Neural Networks to Enhance the Accuracy of Polar Motion Prediction

High-precision polar motion prediction is of great significance for deep space exploration and satellite navigation.Polar motion is affected by a variety of excitation factors,and nonlinear prediction methods are more suitable for polar motion prediction.In order to explore the effect of deep learning in polar motion prediction.This paper proposes a combined model based on empirical wavelet transform(EWT),Convolutional Neural Networks(CNN)and Long Short Term Memory(LSTM).By training and forecasting EOP 20C04 data,the effectiveness of the algorithm is verified,and the performance of two forecasting strategies in deep learning for polar motion prediction is explored.The results indicate that recursive multi-step prediction performs better than direct multi-step prediction for short-term forecasts within 15 days,while direct multi-step prediction is more suitable for medium and long-term forecasts.In the 365 days forecast,the mean absolute error of EWT-CNN-LSTM in the X direction and Y direction is 18.25 mas and 15.78 mas,respectively,which is 23.5% and 16.2% higher than the accuracy of Bulletin A.The results show that the algorithm has a good effect in medium and long term polar motion prediction.

Digital Beamforming Demonstration of a Microstrip Antenna Phased Array Feeds(PAF)at 1.25 GHz

We introduce the structure of a radio astronomy phased array feeds(PAF)beamforming demonstrator.In a laboratory environment,we have demonstrated beamforming on a received 1.25 GHz sinusoidal signal and used digital weighting techniques to plot the 2D pattern of the PAF.The radio frequency part of the demonstrator includes a 4×4 linearly polarized microstrip antenna array,all of which is connected in series with a low-noise amplifier.The signals from the central 4×2 array elements are injected into a radio frequency system-on-chip digital board,which can receive eight inputs with a bandwidth of 512 MHz.Combining the principle of undersampling,the beamforming is completed at a frequency of 1.25 GHz for the offline data,and a 2D image of the beam is plotted using beam scanning technology.

On the Performances of Estimating Stellar Atmospheric Parameters from CSST Broad-band Photometry

Deriving atmospheric parameters of a large sample of stars is of vital importance to understand the formation and evolution of the Milky Way.Photometric surveys,especially those with near-ultraviolet filters,can offer accurate measurements of stellar parameters,with the precision comparable to that from low/medium resolution spectroscopy.In this study,we explore the capability of measuring stellar atmospheric parameters from Chinese Space Station Telescope(CSST)broad-band photometry(particularly in the near-ultraviolet bands),based on synthetic colors derived from model spectra.We find that colors from the optical and near-ultraviolet filter systems adopted by CSST show significant sensitivities to the stellar atmospheric parameters,especially the metallicity.According to our mock data tests,the precision of the photometric metallicity is quite high,with typical values of0.17 and 0.20 dex for dwarf and giant stars,respectively.The precision of the effective temperature estimated from broad-band colors are within 50 K.

Inverse Calculation and Regularization Process for the Solar Aspect System(SAS) of HXI Payload on ASO-S Spacecraft

For the ASO-S/HXI payload, the accuracy of the flare reconstruction is reliant on important factors such as the alignment of the dual grating and the precise measurement of observation orientation. To guarantee optimal functionality of the instrument throughout its life cycle, the Solar Aspect System (SAS) is imperative to ensure that measurements are accurate and reliable. This is achieved by capturing the target motion and utilizing a physical model-based inversion algorithm. However, the SAS optical system’s inversion model is a typical ill-posed inverse problem due to its optical parameters, which results in small target sampling errors triggering unacceptable shifts in the solution. To enhance inversion accuracy and make it more robust against observation errors, we suggest dividing the inversion operation into two stages based on the SAS spot motion model. First, the as-rigid-aspossible (ARAP) transformation algorithm calculates the relative rotations and an intermediate variable between the substrates. Second, we solve an inversion linear equation for the relative translation of the substrates, the offset of the optical axes, and the observation orientation. To address the ill-posed challenge, the Tikhonov method grounded on the discrepancy criterion and the maximum a posteriori (MAP) method founded on the Bayesian framework are utilized. The simulation results exhibit that the ARAP method achieves a solution with a rotational error of roughly±3 5 (1/2-quantile);both regularization techniques are successful in enhancing the stability of the solution, the variance of error in the MAP method is even smaller—it achieves a translational error of approximately±18μm (1/2-quantile) in comparison to the Tikhonov method’s error of around±24μm (1/2-quantile). Furthermore, the SAS practical application data indicates the method’s usability in this study. Lastly, this paper discusses the intrinsic interconnections between the regularization methods.

Spatiotemporal evolution and influencing factors of urban resilience in the Yellow River Basin,China

The Yellow River Basin of China is a key region that contains myriad interactions between human activities and natural environment.Industrialization and urbanization promote social-economic development,but they also have generated a series of environmental and ecological issues in this basin.Previous researches have evaluated urban resilience at the national,regional,urban agglomeration,city,and prefecture levels,but not at the watershed level.To address this research gap and elevate the Yellow River Basin’s urban resilience level,we constructed an urban resilience evaluation index system from five dimensions:industrial resilience,social resilience,environmental resilience,technological resilience,and organizational resilience.The entropy weight method was used to comprehensively evaluate urban resilience in the Yellow River Basin.The exploratory spatial data analysis method was employed to study the spatiotemporal differences in urban resilience in the Yellow River Basin in 2010,2015,and 2020.Furthermore,the grey correlation analysis method was utilized to explore the influencing factors of these differences.The results of this study are as follows:(1)the overall level of urban resilience in the Yellow River Basin was relatively low but showed an increasing trend during 2010–2015,and significant spatial distribution differences were observed,with a higher resilience level in the eastern region and a low-medium resilience level in the western region;(2)the differences in urban resilience were noticeable,with industrial resilience and social resilience being relatively highly developed,whereas organizational resilience and environmental resilience were relatively weak;and(3)the correlation ranking of resilience influencing factors was as follows:science and technology level>administrative power>openness>market forces.This research can provide a basis for improving the resilience level of cities in the Yellow River Basin and contribute to the high-quality development of the region.

Preparation for CSST:Star-galaxy Classification using a Rotationally Invariant Supervised Machine Learning Method

Most existing star-galaxy classifiers depend on the reduced information from catalogs,necessitating careful data processing and feature extraction.In this study,we employ a supervised machine learning method(GoogLeNet)to automatically classify stars and galaxies in the COSMOS field.Unlike traditional machine learning methods,we introduce several preprocessing techniques,including noise reduction and the unwrapping of denoised images in polar coordinates,applied to our carefully selected samples of stars and galaxies.By dividing the selected samples into training and validation sets in an 8:2 ratio,we evaluate the performance of the GoogLeNet model in distinguishing between stars and galaxies.The results indicate that the GoogLeNet model is highly effective,achieving accuracies of 99.6% and 99.9% for stars and galaxies,respectively.Furthermore,by comparing the results with and without preprocessing,we find that preprocessing can significantly improve classification accuracy(by approximately 2.0% to 6.0%)when the images are rotated.In preparation for the future launch of the China Space Station Telescope(CSST),we also evaluate the performance of the GoogLeNet model on the CSST simulation data.These results demonstrate a high level of accuracy(approximately 99.8%),indicating that this model can be effectively utilized for future observations with the CSST.

The Evolution of Photospheric Current Density During an X9.3-Class Solar Flare

This paper deduced the temporal evolution of the magnetic field through a series of high-resolution vector magnetograms and calculated the fine distribution map of current density during an X9.3-class flare eruptions using Ampère's law.The results show that a pair of conjugate current ribbons exist on both sides of the magnetic neutral line in this active region,and these conjugate current ribbons persist before,during,and after the flare.It was observed that the X9.3-class flare brightened in the form of a bright core and evolved into a double-ribbon flare over time.Importantly,the position of the double-ribbon flare matches the position of the current ribbons with high accuracy,and their morphologies are very similar.By investigating the complexity of current density and flare morphology,we discovered a potential connection between the eruption of major flares and the characteristics of current density.