Finite element analysis of deformation characteristics in cold helical rolling of bearing steel-balls

Due to the complexity of investigating deformation mechanisms in helical rolling(HR) process with traditional analytical method, it is significant to develop a 3D finite element(FE) model of HR process. The key forming conditions of cold HR of bearing steel-balls were detailedly described. Then, by taking steel-ball rolling elements of the B7008 C angular contact ball bearing as an example, a completed 3D elastic-plastic FE model of cold HR forming process was established under SIMUFACT software environment. Furthermore, the deformation characteristics in HR process were discovered, including the forming process, evolution and distribution laws of strain, stress and damage based on Lemaitre relative damage model. The results reveal that the central loosening and cavity defects in HR process may have a combined effect of large negative hydrostatic pressure(positive mean stress)caused by multi-dimensional tensile stresses, high level transverse tensile stress, and circular-alternating shear stress in cross section.

A New Model for Simulation of Cold Roll-Forming of Tubes by Using Spline Finite Strip Method

A new model,called object model,for the simulation of cold roll-forming of tubes is presented.The model inherits the advantages of old models and is the embodiment of forming process that the strip is rolled step by step from feed rollers to last rolling pass.The elastic-plastic large deformation spline finite strip method based on updated Lagrangian method has been developed by improving the stiffness and transition matrix.Combined theory formulas and new analytical model,the forming process of a tube has been simulated successfully as an example.The analytical results are submitted and indicate that the proposed simulation method and new model are applicable.

Numerical Simulation and Sensitivity Analysis of Parameters for Multistand Roll Forming of Channel Section With Outer Edge

Cold roll forming is a high production but complex metal forming process under the conditions of coupled effects with multi-factor. A new booting finite element method （FEM） model using the updated Lagrangian （IAL） method for multistand roll forming process is developed and validated. Compared with most of the literatures related to roll forming simulation, the new model can take the roll rotation into account and is well suited for simulating multistand roll forming. Based on the model, the process of a channel section with outer edge formed with twelve passes is simulated and the sensitivity analysis of parameters is conducted with orthogonal design combined FEM model. It is found that the multistand roll forming process can be efficiently analyzed by the new booting model, and sensitivity analysis shows that the yield strength plays an important role in controlling the quality of the products.