In the cold stages of the Quaternary,steppe vegetation was dominant over eastern China as a consequence of long-term aridity.Steppe,forest-steppe and tundra might span conterminously from southern Europe to East Asia....In the cold stages of the Quaternary,steppe vegetation was dominant over eastern China as a consequence of long-term aridity.Steppe,forest-steppe and tundra might span conterminously from southern Europe to East Asia.In the South China floral region,subtropical coniferous forests extended widely over plains and hills.Many taxa of hydrophilic and/or thermophilic plants have survived in sanctuaries.The impact of cold climate in the Quaternary might be limited in severity and extent in eastern China.展开更多
This study was carried out to identify molecular responses of the two varieties with different cold tolerance under cold water stress (13℃) at the booting stage. Transcriptional responses of the genes were analyzed in
Ab The cold tolerance at the bud bursting stage （CTB） was evaluated at 5℃ by using a set of 95 chromosome segment substitution lines （CSSLs） derived from an indica rice 9311 and a japonica rice Nipponbare with a ...Ab The cold tolerance at the bud bursting stage （CTB） was evaluated at 5℃ by using a set of 95 chromosome segment substitution lines （CSSLs） derived from an indica rice 9311 and a japonica rice Nipponbare with a genetic background of 9311. The result showed that six CSSLs had slightly stronger effect on CTB than 9311. Total four quantitative trait loci （QTLs） for CTB were preliminary mapped on chromosomes 5 and 7 by substitution mapping, qCTB-5-1, qCTB-5-2 and qCTB-5-3 were mapped in the region of RM267-RM1237, RM2422-RM6054 and RM3321-RM1054, which were 21.3 cM, 27.4 cM and 12.7 cM in genetic distance on rice chromosome 5, respectively, qCTB-7 was mapped in a 6.8-cM region of RM11-RM2752 on rice chromosome 7.展开更多
[ Objectives] This study was conducted to screen the temperature index most suitable for identification of cold tolerance in bitter gourd （Momordica charantia L. ） at bud and seedling stages. [ Methods] With six dif...[ Objectives] This study was conducted to screen the temperature index most suitable for identification of cold tolerance in bitter gourd （Momordica charantia L. ） at bud and seedling stages. [ Methods] With six different bitter gourd germplasms as experimental materials, the cold tolerance at bud and seedling stages were identified and evaluated. [ Results] At 18℃ , the largest change range of germination potential among different gernlplasms was 11.3% -96.0%, and the largest change range of germination rate was 13.3% - 100.0% ; and the six germplasms could be divided into three grades of cold tolerance. Therefore, 18 9C is an ideal temperature for the identification of cold tolerance in bitter gourd germplasms at bud stage. At 20℃, the cold tolerance in bitter gourd germplasms at bud stage could also be divided into three grades, and the change ranges of germination potential and germination rate were larger than 50.0%, so 20℃ could serve as the candidate temperature for the identification of cold tolerance in bitter gourd germplasms at bud stage. After 1 d of treatment at 6℃, the six bitter gourd germplasms could be divided into three grades, and the cold injury index had the largest range of 20.31 - 84.38 and could serve as the temperature index for the identification of cold tolerance in bitter gourd at seedling stage. [ Conclusions] This study will provide reference for the identification of cold tolerance in bitter gourd at bud stage and seedling stage.展开更多
Pineapple plant was always injured due to low temperature. Breeding varieties with high cold tolerance was the supreme way to resolve this problem and identifying cold tolerance of germplasms collected was necessary. ...Pineapple plant was always injured due to low temperature. Breeding varieties with high cold tolerance was the supreme way to resolve this problem and identifying cold tolerance of germplasms collected was necessary. In this study, SSR locus around homologous sequences of cold-tolerant genes w</span><span style="font-family:"">as</span><span style="font-family:""> searched and screened using MD-2 (cold-tolerant variety) and Tainong 17 (cold-sensitive variety). Seventy three pairs of primers of which PCR results were different between these two varieties were gotten. PCRs were performed using these as primers and genomic DNA of germplasms collected as templates. Six pairs of primers were found that their PCR results were in good consistent with cold tolerance. Using GLM (General linear model) association <span>mapping analysis, two SSR markers linked to cold tolerance were found. Their</span> efficiency was verified further using pineapple germplasms with high cold tolerance which had been validated in field by cold wave. They will be used in cold-tolerant breeding of pineapple in the future.展开更多
Based on the characteristics of pickling wastewater in the cold-rolling production of stainless steel, a new processing route, featuring source sludge reduction, wastewater two-stage treatment, heavy metal-contained s...Based on the characteristics of pickling wastewater in the cold-rolling production of stainless steel, a new processing route, featuring source sludge reduction, wastewater two-stage treatment, heavy metal-contained sludge and calcium salt sludge separating recovery, was proposed. As shown by the research results, after the two-stage process treatment, the effluent water can steadily reach the emission standards, the sludge yield can be decreased by more than 8% ; within the heavy metal-contained sludge, the recovery rates of Fc,Cr and Ni can either reach or surpass 95% ,and the total content ofF and S can drop to around 3%. Therefore,the sludge in the front part can be used as ferric dust. In the calcium salt sludge ,the recovery rate of F can either reach or surpass 85% ,and the total contents of Fe,Cr and Ni can fall below 0.5%. So the sludge in the rear part can be used as fluorgypsum or fluorite. Meanwhile,the results of the analysis on heavy metals leaching toxicity and morphologic distribution indicate that the two kinds of sectionalized sludge are not classified as hazardous wastes, which have a stable behavior and better utilization values compared with the former mixed- sludge.展开更多
Genetic analysis showed that cold tolerance at booting stage of near-isogenic lines （NILs） of Kunmingxiaobaigu was controlled by a gene with large phenotypic variance. One hundred and sixty-four simple sequence repe...Genetic analysis showed that cold tolerance at booting stage of near-isogenic lines （NILs） of Kunmingxiaobaigu was controlled by a gene with large phenotypic variance. One hundred and sixty-four simple sequence repeats （SSR） distributed over 12 chromosomes were used to screen polymorphism between Towata （recurrent parent, RP） and near-isogenic line pool （NILP）, and two SSR markers at the long arm of chromosome 5 showed polymorphism in comparison with RP genome. Of the two markers, RM31 was found possibly linked with the cold tolerance gene at booting stage through one-way ANOVA. Twelve SSR markers around RM31 were then used to detect polymorphism between RP and NIL, and only RM7452 had polymorphism. The gene of cold tolerance at booting stage was further mapped on chromosome 5 between RM7452 and RM31 with genetic distances of 4.8 cM and 8.0 cM, respectively. This gene explained 10.50% of phenotypic variance and 5.10% of phenotypic variance of fully filled grains, and was tentatively designated as Ctb（t）.展开更多
The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the...The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the geometric and boundary condition similarity. At the same time the condition of self-modeling is met. The experimental results show that the mixture of primary air and secondary air becomes slower, the average turbulence magnitude the relative diameter of the tangential firing enlarges of the main combustion zone becomes less and when the secondary air deflection angle increases When the velocity pressure ratio of the secondary air to the primary air （p2/p1） enlarges, the mixture of the secondary air and the primary air becomes stronger, the average turbulence magnitude of the main combustion zone increases, and the relative diameter of the tangential firing becomes larger. Because the over fire air （OFA） laid out near the wall has a powerful penetration, the relative diameter of the tangential firing on the section of the OFA is very little, but the average turbulence magnitude is great. When the velocity pressure ratio of the OFA to the primary air POFA/p1 increases, the relative diameter of the tangential firing on the section of the OFA grows little, the average turbulence magnitude becomes larger and the penetration of the OFA becomes more powerful.展开更多
文摘In the cold stages of the Quaternary,steppe vegetation was dominant over eastern China as a consequence of long-term aridity.Steppe,forest-steppe and tundra might span conterminously from southern Europe to East Asia.In the South China floral region,subtropical coniferous forests extended widely over plains and hills.Many taxa of hydrophilic and/or thermophilic plants have survived in sanctuaries.The impact of cold climate in the Quaternary might be limited in severity and extent in eastern China.
文摘This study was carried out to identify molecular responses of the two varieties with different cold tolerance under cold water stress (13℃) at the booting stage. Transcriptional responses of the genes were analyzed in
基金supported by the Special Program for Rice Scientific Research in Ministry of Agriculture, China (Grant No.nyhyzx 07-001-006)Special Funds for Construction of Modern Agricultural Industry R & D SystemSelf-directed Innovation Fund of Agricultural Science and Technology in Jiangsu Province, China (Grant No. CX [09] 634)
文摘Ab The cold tolerance at the bud bursting stage （CTB） was evaluated at 5℃ by using a set of 95 chromosome segment substitution lines （CSSLs） derived from an indica rice 9311 and a japonica rice Nipponbare with a genetic background of 9311. The result showed that six CSSLs had slightly stronger effect on CTB than 9311. Total four quantitative trait loci （QTLs） for CTB were preliminary mapped on chromosomes 5 and 7 by substitution mapping, qCTB-5-1, qCTB-5-2 and qCTB-5-3 were mapped in the region of RM267-RM1237, RM2422-RM6054 and RM3321-RM1054, which were 21.3 cM, 27.4 cM and 12.7 cM in genetic distance on rice chromosome 5, respectively, qCTB-7 was mapped in a 6.8-cM region of RM11-RM2752 on rice chromosome 7.
文摘[ Objectives] This study was conducted to screen the temperature index most suitable for identification of cold tolerance in bitter gourd （Momordica charantia L. ） at bud and seedling stages. [ Methods] With six different bitter gourd germplasms as experimental materials, the cold tolerance at bud and seedling stages were identified and evaluated. [ Results] At 18℃ , the largest change range of germination potential among different gernlplasms was 11.3% -96.0%, and the largest change range of germination rate was 13.3% - 100.0% ; and the six germplasms could be divided into three grades of cold tolerance. Therefore, 18 9C is an ideal temperature for the identification of cold tolerance in bitter gourd germplasms at bud stage. At 20℃, the cold tolerance in bitter gourd germplasms at bud stage could also be divided into three grades, and the change ranges of germination potential and germination rate were larger than 50.0%, so 20℃ could serve as the candidate temperature for the identification of cold tolerance in bitter gourd germplasms at bud stage. After 1 d of treatment at 6℃, the six bitter gourd germplasms could be divided into three grades, and the cold injury index had the largest range of 20.31 - 84.38 and could serve as the temperature index for the identification of cold tolerance in bitter gourd at seedling stage. [ Conclusions] This study will provide reference for the identification of cold tolerance in bitter gourd at bud stage and seedling stage.
文摘Pineapple plant was always injured due to low temperature. Breeding varieties with high cold tolerance was the supreme way to resolve this problem and identifying cold tolerance of germplasms collected was necessary. In this study, SSR locus around homologous sequences of cold-tolerant genes w</span><span style="font-family:"">as</span><span style="font-family:""> searched and screened using MD-2 (cold-tolerant variety) and Tainong 17 (cold-sensitive variety). Seventy three pairs of primers of which PCR results were different between these two varieties were gotten. PCRs were performed using these as primers and genomic DNA of germplasms collected as templates. Six pairs of primers were found that their PCR results were in good consistent with cold tolerance. Using GLM (General linear model) association <span>mapping analysis, two SSR markers linked to cold tolerance were found. Their</span> efficiency was verified further using pineapple germplasms with high cold tolerance which had been validated in field by cold wave. They will be used in cold-tolerant breeding of pineapple in the future.
文摘Based on the characteristics of pickling wastewater in the cold-rolling production of stainless steel, a new processing route, featuring source sludge reduction, wastewater two-stage treatment, heavy metal-contained sludge and calcium salt sludge separating recovery, was proposed. As shown by the research results, after the two-stage process treatment, the effluent water can steadily reach the emission standards, the sludge yield can be decreased by more than 8% ; within the heavy metal-contained sludge, the recovery rates of Fc,Cr and Ni can either reach or surpass 95% ,and the total content ofF and S can drop to around 3%. Therefore,the sludge in the front part can be used as ferric dust. In the calcium salt sludge ,the recovery rate of F can either reach or surpass 85% ,and the total contents of Fe,Cr and Ni can fall below 0.5%. So the sludge in the rear part can be used as fluorgypsum or fluorite. Meanwhile,the results of the analysis on heavy metals leaching toxicity and morphologic distribution indicate that the two kinds of sectionalized sludge are not classified as hazardous wastes, which have a stable behavior and better utilization values compared with the former mixed- sludge.
基金supportedby China National Natural Science Foundation(30160043,30260060) the Natural ScienceFoundation of Yunnan Province(2004CO010Z).
文摘Genetic analysis showed that cold tolerance at booting stage of near-isogenic lines （NILs） of Kunmingxiaobaigu was controlled by a gene with large phenotypic variance. One hundred and sixty-four simple sequence repeats （SSR） distributed over 12 chromosomes were used to screen polymorphism between Towata （recurrent parent, RP） and near-isogenic line pool （NILP）, and two SSR markers at the long arm of chromosome 5 showed polymorphism in comparison with RP genome. Of the two markers, RM31 was found possibly linked with the cold tolerance gene at booting stage through one-way ANOVA. Twelve SSR markers around RM31 were then used to detect polymorphism between RP and NIL, and only RM7452 had polymorphism. The gene of cold tolerance at booting stage was further mapped on chromosome 5 between RM7452 and RM31 with genetic distances of 4.8 cM and 8.0 cM, respectively. This gene explained 10.50% of phenotypic variance and 5.10% of phenotypic variance of fully filled grains, and was tentatively designated as Ctb（t）.
基金This paper is supported by National Natural Science Foundation of China under Grant No50476050Natural Science Basic Research Plan in Shaanxi Province of China under Grant No2005E221
文摘The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the geometric and boundary condition similarity. At the same time the condition of self-modeling is met. The experimental results show that the mixture of primary air and secondary air becomes slower, the average turbulence magnitude the relative diameter of the tangential firing enlarges of the main combustion zone becomes less and when the secondary air deflection angle increases When the velocity pressure ratio of the secondary air to the primary air （p2/p1） enlarges, the mixture of the secondary air and the primary air becomes stronger, the average turbulence magnitude of the main combustion zone increases, and the relative diameter of the tangential firing becomes larger. Because the over fire air （OFA） laid out near the wall has a powerful penetration, the relative diameter of the tangential firing on the section of the OFA is very little, but the average turbulence magnitude is great. When the velocity pressure ratio of the OFA to the primary air POFA/p1 increases, the relative diameter of the tangential firing on the section of the OFA grows little, the average turbulence magnitude becomes larger and the penetration of the OFA becomes more powerful.
