Research on Product Digital Collaborative Design System

Network economy had changed manufacturing environme nt at all. Open global market offer more choice to customer, and it become changea ble and unpredictable as consumers’ needs become more and more characteristic an d diversified. Various new technology coming forth and application accelerate th e rapid change of the market. The manufacturing enterprises were compelled t o change their strategy by the variability of the market, and time has been put to the all-important place. There is a need driven by the market to set up a ne twork design and manufacturing mode which have rapid market responsiveness. In order to meet the need for network manufacturing, the organization and manage ment of manufacturing enterprise need a completely innovation, next generation o f manufacturing system must have the character such as digitization, flexibility , agility, customization and globalization and so on. As for an enterprise in au to industry, how to gather together the orders through the distribution, and rap id produce the product which can meet the customer’s need, it is the key that th e contemporary enterprises succeed in the competitive market. The competitive market requires rapid product development. Close cooperation amo ng the designers will accelerate the product development by shortening the devel opment cycle, improving the product quality and reducing the investment. It has been emphasized in the methodology of concurrent engineering (CE). But sometimes those partners are distributed in the world, so there is a need for an importan t technology contribution to collaborative engineering, and supporting distribut ed designers for rapid product development. This paper focuses on a collaborative design system: Product Digit Collaborative Design System (PDCDS). The solution of PDCDS can make it more efficient and rel iable to visit teledata as well as we can get it from local database. It will be ease to get the newest design process information aided by PDCDS, and it will h ave higher efficiency by collaborative work. Comparing with other traditional Pr oduct Data Management (PDM) software system, PDCDS have some new characters such as group, dynamicness, synchronization or asynchronism working mode, and the hi story recorder is needed, and it also surport Webservice.

Collaborative production planning between supply chain partners by Lagrangian relaxation

A collaborative planning framework based on the Lagrangian Relaxation was developed to coordinate and optimize the production planning of independent partners in multiple tier supply chains. Linking constraints and dependent demand constraints were added to the monolithic Multi-Level, multi-item Capacitated Lot Sizing Problem (MLCLSP). MLCLSP was Lagrangian relaxed and decomposed into facility-separable subproblems. Surrogate gradient algorithm was used to update Lagrangian multipliers, which coordinate decentralized decisions of the facilities. Production planning of independent partners could be appropriately coordinated and optimized by this framework without intruding their decisionities and private information. Experimental results show that the proposed coordination mechanism and procedure come close to optimal results as obtained by central coordination.

Research on Concurrent Design of Collaborative Product Commerce Oriented Discrete Manufacturing Enterprises

In order to fulfill the product concurrent design requirements of discrete manufacturing enterprises, this paper puts forth for the first time a Collaborative Product Commerce (CPC) oriented X2D (X to Design) theory, which can take Collaboration, Commerce and Concurrence (3C) into realization during the product design stage. At the same time, this research adopts VPN (Virtual Private Network) technique to ensure the security of product data and information during transportation. By building CPC oriented and VPN based framework of X2D product concurrent design system, the paper explores a way for discrete enterprises adapting to the drastically competitive market and performing their product innovation.

Knowledge-Based Platform for Collaborative Innovation Development of Products

The platform of distributed design and resource sharing is important for medium-sized and small companies in developing products to improve competitiveness. As a background of creative product design, a knowledge model based on product collaborative innovation development of products (CIDP) is proposed. Characteristics of CIDP are analyzed, and the framework and key technologies of the CIDP-platform based knowledge studied. Through integration of existing system and interface designs, a development platform has been built to support the PCID within knowledge-based engineering (KBE). An example is presented, indicating that the prototype system is maneuverable and practical.

LeNS China:A Chinese learning network on sustainability for the development and diffusion of teaching materials and tools on design for sustainability

It is a shared opinion that sustainable development requires a system discontinuity, meaning that radical changes in the way we produce and consume are needed. Within this framework there is an emerging understanding that an important contribution to this change can be directly linked to decisions taken in the design phase of products, services and systems. Design schools have therefore to be able to provide design students with a broad knowledge and effective Design for Sustainability tools, in order to enable a new generation of designers in playing an active role in re-orienting our consumption and production patterns. This paper presents the intermediate results of the LeNS China, the Learning Network on Sustainability of Chinese design Higher Education Institutions aiming at curricula development on Design for Sustainability. The project is a regeneration of the LeNS Asian-European multi-polar network project financed by the European Commission. LeNS China is taking in consideration the local needs, interests and opportunities could represent a significant enabling platform capable to sensitise, support and empower a new generation of Chinese design educators, designers and entrepreneurs to reach design practice throughout an open collaborative learning approach. The paper will firstly introduce the LeNS project and its ethos, and then the LeNS China network will be described in terms of the state of the art of design for sustainability and its education in China, the scope and the objective, the results achieved so far and the next steps.

基于TLBO算法的不确定性条件下复杂产品协同设计的可靠性拓扑优化

复杂产品的拓扑优化设计可以显著节省材料和节能,有效地降低惯性力和机械振动。本研究以一种大吨位液压机作为典型的复杂产品,用于阐述该优化方法。本文提出了一种基于可靠性与优化解耦模型和基于教学学习的优化(TLBO)算法的可靠性拓扑优化方法。将由板结构形成的支撑物作为拓扑优化对象,重量轻、稳定性好。将不确定性下的可靠性优化和结构拓扑优化协同处理。首先,利用有限差分法将优化问题中的不确定性参数修正为确定性参数。然后,将不确定性可靠性分析和拓扑优化的复杂嵌套解耦。最后,利用TLBO算法求解解耦模型,该算法参数少,求解速度快。TLBO算法采用了自适应教学因子,在初始阶段实现了更快的收敛速度,并在后期进行了更精细的搜索。本文给出了一个液压机基板结构的数值实例,说明了该方法的有效性。

Geological characteristics and development potential of transitional shale gas in the east margin of the Ordos Basin,NW China

The shales in the 2nd Member of Shanxi formation in the east margin of the Ordos Basin were deposited in a marine-nonmarine transitional environment during the Permian.Based on the recent breakthroughs in the shale gas exploration and theoretical understandings on the shale gas of the study area,with a comparison to marine shale gas in the Sichuan Basin and marine-nonmarine transitional shale gas in the U.S.,this study presents the geological characteristics and development potential of marine-nonmarine transitional gas in the study area.Four geological features are identified in the 2nd Member of the Shanxi Formation in the study area has:(1)stable sedimentary environment is conductive to deposition of widely distributed organic shale;(2)well-developed micro-and nanoscale pore and fracture systems,providing good storage capacity;(3)high content of brittle minerals such as quartz,leading to effectively reservoir fracturing;and(4)moderate reservoir pressure and relatively high gas content,allowing efficient development of shale gas.The 2nd Member of Shanxi Formation in the east margin of Ordos Basin is rich in shale gas resource.Three favorable zones,Yulin-Linxian,Shiloubei-Daning-Jixian,and Hancheng-Huangling are developed,with a total area of 1.28×104 km2 and resources between 1.8×1012 and 2.9×1012m3,indicating a huge exploration potential.Tests of the 2nd Member of Shanxi Formation in vertical wells show that the favorable intervals have stable gas production and high reserves controlled by single well,good recoverability and fracability.This shale interval has sufficient energy,stable production capacity,and good development prospects,as evidenced by systematic well testing.The east margin of the Ordos Basin has several shale intervals in the Shanxi and Taiyuan formations,and several coal seams interbedded,so collaborative production of different types of natural gas in different intervals can be considered.The study results can provide reference for shale gas exploration and development and promote the rapid exploitation of shale gas in China.

The Information Flow Analyzing Based on CPC

The information flow chart within product life cycle is given out based on collaborative production commerce （CPC） thoughts. In this chart, the separated information systems are integrated by means of enterprise knowledge assets that are promoted by CPC from production knowledge. The information flow in R＆D process is analyzed in the environment of virtual R＆D group and distributed PDM. In addition, the information flow throughout the manufacturing and marketing process is analyzed in CPC environment.

A Collaborative Platform for Complex Product Development Based on Multi-Domain Unified Modeling and Simulation

In order to intensify market competition, manufacturing enterprises must improve their product innovation capability. It is difficult to integrate the system modeling, simulation and collaborative process management in complex product development. A collaborative platform for complex product development based on multi-domain unified modeling and simulation is proposed in this paper. The architecture of the platform is firstly stated. The idea and realization of three key technologies, i.e. multi-domain modeling and simulation for complex product, knowledge management for product design and simulation, multi-domain collaborative mechanism, are emphasized. Finally, an industry case is given. The demonstration of the system shows that integration architecture is the effective infrastructure for multi-domain collaborative product development.

Product platform architecture for cloud manufacturing

Cloud manufacturing is emerging as a new manufacturing paradigm and an integrated technology.To adapt to the increasing challenges of the traditional manufacturing industry transforming toward service-oriented and innovative manufacturing,this paper proposes a product platform architecture based on cloud manufacturing.Firstly,a framework for the product platform for cloud manufacturing was built.The proposed architecture is composed of five layers:resource,cloud technology,cloud service,application,and user layers.Then,several key enabling technologies for forming the product platform were studied.Finally,the product platform for cloud manufacturing built by a company was taken as an application example to illustrate the architecture and functions of the system.The validity and superiority of the architecture were verified.