New Fragile Watermarking Technique to Identify Inserted Video Objects Using H.264 and Color Features

The transmission of video content over a network raises various issues relating to copyright authenticity,ethics,legality,and privacy.The protection of copyrighted video content is a significant issue in the video industry,and it is essential to find effective solutions to prevent tampering and modification of digital video content during its transmission through digital media.However,there are stillmany unresolved challenges.This paper aims to address those challenges by proposing a new technique for detectingmoving objects in digital videos,which can help prove the credibility of video content by detecting any fake objects inserted by hackers.The proposed technique involves using two methods,the H.264 and the extraction color features methods,to embed and extract watermarks in video frames.The study tested the performance of the system against various attacks and found it to be robust.The evaluation was done using different metrics such as Peak-Signal-to-Noise Ratio(PSNR),Mean Squared Error(MSE),Structural Similarity Index Measure(SSIM),Bit Correction Ratio(BCR),and Normalized Correlation.The accuracy of identifying moving objects was high,ranging from 96.3%to 98.7%.The system was also able to embed a fragile watermark with a success rate of over 93.65%and had an average capacity of hiding of 78.67.The reconstructed video frames had high quality with a PSNR of at least 65.45 dB and SSIMof over 0.97,making them imperceptible to the human eye.The system also had an acceptable average time difference(T=1.227/s)compared with other state-of-the-art methods.

基于特征工程的S-FCN火灾图像检测方法

针对复杂背景下火灾图像检测深度学习算法存在的计算复杂度高、检测实时性差等问题,提出一种基于特征工程的单隐层全连接网络(S-FCN)火灾图像检测方法。首先,从图像中提取多色彩空间颜色特征,并使用互信息量进行多色彩空间颜色特征降维;其次,简化深度学习模型的网络结构,将单隐层全连接网络作为其主干网络,其中,多色彩空间下的颜色特征能够更好地表征火灾烟雾与火焰,多色彩空间颜色特征降维能够有效降低输入特征的冗余度,单隐层全连接网络能够有效减少模型在传递过程中的参数数量;最后,将该方法在真实的复杂背景火灾图像数据集上进行试验评估。结果表明:所提方法取得的检测精度为93.83%,取得的检测实时性帧率为10869帧/s,能够实现复杂场景下高精度、高速度的火灾图像检测。

EFFECTIVE FEATURE ANALYSIS FOR COLOR IMAGE SEGMENTATION

An approach for color image segmentation is proposed based on the contributions of color features to segmentation rather than the choice of a particular color space. The determination of effective color features depends on the analysis of various color features from each tested color image via the designed feature encoding. It is different from the pervious methods where self organized feature map (SOFM) is used for constructing the feature encoding so that the feature encoding can self organize the effective features for different color images. Fuzzy clustering is applied for the final segmentation when the well suited color features and the initial parameter are available. The proposed method has been applied in segmenting different types of color images and the experimental results show that it outperforms the classical clustering method. The study shows that the feature encoding approach offers great promise in automating and optimizing the segmentation of color images.

Feature fusion method for edge detection of color images

A novel feature fusion method is proposed for the edge detection of color images. Except for the typical features used in edge detection, the color contrast similarity and the orientation consistency are also selected as the features. The four features are combined together as a parameter to detect the edges of color images. Experimental results show that the method can inhibit noisy edges and facilitate the detection for weak edges. It has a better performance than conventional methods in noisy environments.

Image block feature vectors based on a singular-value information metric and color-texture description

In this work, image feature vectors are formed for blocks containing sufficient information, which are selected using a singular-value criterion. When the ratio between the first two SVs axe below a given threshold, the block is considered informative. A total of 12 features including statistics of brightness, color components and texture measures are used to form intermediate vectors. Principal component analysis is then performed to reduce the dimension to 6 to give the final feature vectors. Relevance of the constructed feature vectors is demonstrated by experiments in which k-means clustering is used to group the vectors hence the blocks. Blocks falling into the same group show similar visual appearances.

Integrating Color and Spatial Feature for Content-Based Image Retrieval

In this paper, we present a novel and efficient scheme for extracting, indexing and retrieving color images. Our motivation was to reduce the space overhead of partition-based approaches taking advantage of the fact that only a relatively low number of distinct values of a particular visual feature is present in most images. To extract color feature and build indices into our image database we take into consideration factors such as human color perception and perceptual range, and the image is partitioned into a set of regions by using a simple classifying scheme. The compact color feature vector and the spatial color histogram, which are extracted from the seqmented image region, are used for representing the color and spatial information in the image. We have also developed the region-based distance measures to compare the similarity of two images. Extensive tests on a large image collection were conducted to demonstrate the effectiveness of the proposed approach.

Driver Fatigue Detection System Based on Colored and Infrared Eye Features Fusion

Real-time detection of driver fatigue status is of great significance for road traffic safety.In this paper,a proposed novel driver fatigue detection method is able to detect the driver’s fatigue status around the clock.The driver’s face images were captured by a camera with a colored lens and an infrared lens mounted above the dashboard.The landmarks of the driver’s face were labeled and the eye-area was segmented.By calculating the aspect ratios of the eyes,the duration of eye closure,frequency of blinks and PERCLOS of both colored and infrared,fatigue can be detected.Based on the change of light intensity detected by a photosensitive device,the weight matrix of the colored features and the infrared features was adjusted adaptively to reduce the impact of lighting on fatigue detection.Video samples of the driver’s face were recorded in the test vehicle.After training the classification model,the results showed that our method has high accuracy on driver fatigue detection in both daytime and nighttime.

Soft measurement for component content based on adaptive model of Pr/Nd color features

For measurement of component content in the extraction and separation process of praseodymium/neodymium(Pr/Nd), a soft measurement method was proposed based on modeling of ion color features, which is suitable for fast estimation of component content in production field. Feature analysis on images of the solution is conducted,which are captured from Pr/Nd extraction/separation field. H/S components in the HSI color space are selected as model inputs, so as to establish the least squares support vector machine(LSSVM) model for Nd(Pr) content,while the model parameters are determined with the GA algorithm. To improve the adaptability of the model,the adaptive iteration algorithm is used to correct parameters of the LSSVM model, on the basis of model correction strategy and new sample data. Using the field data collected from rare earth extraction production, predictive methods for component content and comparisons are given. The results indicate that the proposed method presents good adaptability and high prediction precision, so it is applicable to the fast detection of element content in the rare earth extraction.

Flame Recognition in Video Images with Color and Dynamic Features of Flames

Recently,video based flame detection has become an important approach for early detection of fire under complex circumstances.However,the detection accuracy of most existing methods remains unsatisfactory.In this paper,we develop a new algorithm that can significantly improve the accuracy of flame detection in video images.The algorithm segments a video image and obtains areas that may contain flames by combining a two-step clustering based approach with the RGB color model.A few new dynamic and hierarchical features associated with the suspected regions,including the flicker frequency of flames,are then extracted and analyzed.The algorithm determines whether a suspected region contains flames or not by processing the color and dynamic features of the area altogether with a classifier,which can be a BP neural network,a k nearest neighbor classifier or a support vector machine.Testing results show that this algorithm is robust and efficient,and is able to significantly reduce the probability of false alarms.

Spectroscopic Features and Coloration of Gem-Quality Green Tsavorite in Major International Deposits and China

Tsavorite green colored by Cr3+/V3+ has been traditionally found and mined in Tanzania, Kenya and Madagascar in the Neoproterozoic Mozambique metamorphic belt (NMMB), and recently be found in Sanjiang, Litang, Sichuan, China. The differences of the chemical formula, spectroscopic features, as well as the concentrations of the V2O3 and Cr2O3 in the tsavorite crystals collected from major international deposits and Sanjiang, China have been investigated using EPMA, XRF, UV-VIS spectrometers, FTIR, Raman scattering microscopy, DiamondView TM techniques. It was found that the chemical formulas of African tsavorite and Chinese tsavorite are Ca3(Al,V)2[SiO4]3 and Ca3(Al,Cr)2[SiO4]3, respectively, indicating that tsavorite is a solid solution between dominant grossular and minor goldmanite and uvarovite. Two broad bands centered at 430 nm and 605 nm were the main absorption features in the tsavorite samples, which attribute to the absorption of Cr3+ and/or V3+ ions in the lattice. The green coloration is caused by Cr3+ and/or V3+ ions resulting in the absorption of purple and red components of the visible light. Absorptions caused of Fe3+ and Fe2+ ions could add the bluish color component in some of tsavorite samples. The intensity of green color is proportional to the concentrations of V2O3 and Cr2O3. The basic gemological properties, such as refractive index in the investigated samples were presented, and the definition and chemical and spectroscopic properties of tsavorite are discussed.

Extraction of color-intensity feature towards image authentication

A color-intensity feature extraction method is proposed aimed at supplementing conventional image hashing algorithms that only consider intensity of the image. An image is mapped to a set of blocks represented by their dominant colors and average intensities. The dominant color is defined by hue and saturation with the hue value adjusted to make the principal colors more uniformly distributed. The average intensity is extracted from the Y component in the YCbCr space. By quantizing the color and intensity components, a feature vector is formed in a cylindrical coordinate system for each image block, which may be used to generate an intermediate hash. Euclidean distance is modified and a similarity metric introduced to measure the degree of similarity between images in terms of the color-intensity features. This is used to validate effectiveness of the proposed feature vector. Experiments show that the color-intensity feature is robust to normal image processing while sensitive to malicious alteration, in particular, color modification.

Improved color feature arrangement for mean shift tracking

In order to reduce redundant empty bin capacity arrangement mechanism for mean shift tracking objects in the probability representation, we present a new color feature In the proposed mechanism, the important optimal color, or we call it optimal color vector, is clustered by closing Euclidean distance which happens inside the original RGB color 3-D spatial domain. After obtaining clustering colors from the reference image RGB spatial domain, novel clustering groups substitute for original color data. So the new color substitution distribution is as similar as the original one. And then target region in the candidate frame is mapped by the constructed optimal clustering colors and the cluster Indices. In the final, mean shift algorithm gives a performance in the new optimal color distribution. Comparison under the same circumstance between the proposed algorithm and conventional mean shift algorithm shows that the former has a certain advantage in computation cost.

Recognizing Breast Cancer Using Edge-Weighted Texture Features of Histopathology Images

Around one in eight women will be diagnosed with breast cancer at some time.Improved patient outcomes necessitate both early detection and an accurate diagnosis.Histological images are routinely utilized in the process of diagnosing breast cancer.Methods proposed in recent research only focus on classifying breast cancer on specific magnification levels.No study has focused on using a combined dataset with multiple magnification levels to classify breast cancer.A strategy for detecting breast cancer is provided in the context of this investigation.Histopathology image texture data is used with the wavelet transform in this technique.The proposed method comprises converting histopathological images from Red Green Blue(RGB)to Chrominance of Blue and Chrominance of Red(YCBCR),utilizing a wavelet transform to extract texture information,and classifying the images with Extreme Gradient Boosting(XGBOOST).Furthermore,SMOTE has been used for resampling as the dataset has imbalanced samples.The suggested method is evaluated using 10-fold cross-validation and achieves an accuracy of 99.27%on the BreakHis 1.040X dataset,98.95%on the BreakHis 1.0100X dataset,98.92%on the BreakHis 1.0200X dataset,98.78%on the BreakHis 1.0400X dataset,and 98.80%on the combined dataset.The findings of this study imply that improved breast cancer detection rates and patient outcomes can be achieved by combining wavelet transformation with textural signals to detect breast cancer in histopathology images.

Enhanced Face Detection Technique Based on Color Correction Approach and SMQT Features

Face detection is considered as a challenging problem in the field of image analysis and computer vision. There are many researches in this area, but because of its importance, it needs to be further developed. Successive Mean Quantization Transform (SMQT) for illumination and sensor insensitive operation and Sparse Network of Winnow (SNoW) to speed up the original classifier based face detection technique presented such a good result. In this paper we use the Mean of Medians of CbCr (MMCbCr) color correction approach to enhance the combined SMQT features and SNoW classifier face detection technique. The proposed technique is applied on color images gathered from various sources such as Internet, and Georgia Database. Experimental results show that the face detection performance of the proposed method is more effective and accurate compared to SFSC method.

A Study of T he Color Purple from the Lexical Feature of Literary Stylistics

The Color Purple is one of the most outstanding works of Alice Walker, and more and more people keep close eyes on the novel. In the thesis, it is intended to explore Alice Walker's writing style from a stylistic perspective, trying to explain how the"meaning"of The Color Purple is created through the writer's linguistic choices and narrative techniques, and to appreciate the beauty and strength hidden under the surface.

Traffic Sign Detection with Low Complexity for Intelligent Vehicles Based on Hybrid Features

Globally traffic signs are used by all countries for healthier traffic flow and to protect drivers and pedestrians.Consequently,traffic signs have been of great importance for every civilized country,which makes researchers give more focus on the automatic detection of traffic signs.Detecting these traffic signs is challenging due to being in the dark,far away,partially occluded,and affected by the lighting or the presence of similar objects.An innovative traffic sign detection method for red and blue signs in color images is proposed to resolve these issues.This technique aimed to devise an efficient,robust and accurate approach.To attain this,initially,the approach presented a new formula,inspired by existing work,to enhance the image using red and green channels instead of blue,which segmented using a threshold calculated from the correlational property of the image.Next,a new set of features is proposed,motivated by existing features.Texture and color features are fused after getting extracted on the channel of Red,Green,and Blue(RGB),Hue,Saturation,and Value(HSV),and YCbCr color models of images.Later,the set of features is employed on different classification frameworks,from which quadratic support vector machine(SVM)outnumbered the others with an accuracy of 98.5%.The proposed method is tested on German Traffic Sign Detection Benchmark(GTSDB)images.The results are satisfactory when compared to the preceding work.

结合主动光源和改进YOLOv5s模型的夜间柑橘检测方法

【目的】解决夜间环境下遮挡和较小柑橘难以准确识别的问题,实现采摘机器人全天候智能化作业。【方法】提出一种结合主动光源的夜间柑橘识别方法。首先,通过分析主动光源下颜色特征不同的夜间柑橘图像,选择最佳的光源色并进行图像采集。然后,提出一种夜间柑橘检测模型BI-YOLOv5s,该模型采用双向特征金字塔网络(Bi-FPN)进行多尺度交叉连接和加权特征融合,提高对遮挡和较小果实的识别能力;引入Coordinate attention(CA)注意力机制模块,进一步加强对目标位置信息的提取;采用融入Transformer结构的C3TR模块,在减少计算量的同时更好地提取全局信息。【结果】本文提出的BI-YOLOv5s模型在测试集上的精准率、召回率、平均准确率分别为93.4%、92.2%和97.1%,相比YOLOv5s模型分别提升了3.2、1.5和2.3个百分点。在所采用的光源色环境下,模型对夜间柑橘识别的正确率为95.3%,相比白光环境下提高了10.4个百分点。【结论】本文提出的方法对夜间环境下遮挡和小目标柑橘的识别具有较高的准确性,可为夜间果蔬智能化采摘的视觉精准识别提供技术支持。

基于特征图像组合与改进ResNet-18的电能质量扰动识别方法

针对传统电能质量扰动(power quality disturbance,PQD)识别体系中单一图像特征信息受限与算法识别能力不足等问题,依据特征融合的思想,提出一种基于特征图像组合与改进ResNet-18的PQD识别方法。首先,对PQD信号进行变分模态分解(variational mode decomposition,VMD)得到一系列固有模态函数(intrinsic mode functions,IMFs)与残差分量;其次,将IMFs、残差分量、原始扰动信号与Subtract分量纵向拼接成分量矩阵,利用信号-图像转化方法生成特征分量彩色图;再次,对原始扰动信号进行连续小波变换(continuous wavelet transform,CWT)生成小波时-频图;最后,将特征分量彩色图与小波时-频图组合输入改进的六通道ResNet-18中训练学习并完成扰动识别。通过仿真对PQD识别方法进行分析并将其与目前常用识别体系进行比较。结果表明,所提方法具有较好的抗噪性能并且能够更好地提取PQD特征信息,达到更高的识别准确率。

基于频率响应与图像特征提取的动车组变压器绕组状态诊断方法研究

动车组变压器是保障高速铁路稳定运行的核心设备,频率响应法是目前检测变压器绕组状态的有效方法。为提升车载变压器绕组状态诊断的准确性,结合暂态信号与频率响应法提出基于频率响应与图像特征提取的动车组变压器绕组状态诊断方法。搭建试验车载变压器绕组故障模拟平台,获取不同故障类型和故障位置的频响曲线,利用类Gram矩阵结合幅频和相频曲线信息,再利用密度分层法转换为伪彩色图,提取对应的灰度共生矩阵和灰度差分矩阵特征值,根据鹈鹕优化支持向量机方法对绕组故障进行诊断。试验结果表明:车载变压器绕组故障发生时,伪彩色图能够反映出故障信息,有利于图像分析和特征提取,采用基于频率响应与图像特征提取的动车组变压器绕组状态诊断方法能够识别车载变压器绕组的典型故障类型和位置。

舌下络脉的客观识别与颜色分类研究

目的探讨中医舌下络脉诊的颜色信息客观识别方法。方法结合计算机视觉,尝试利用紧凑型全卷积网络(CFCNs)和19种深度学习分类模型等算法进行研究,并设计双络脉矩形算法,作为舌下络脉分割识别和颜色信息提取的手段。结果应用“去除反光点+数据扩充+数据后处理”方法获取的舌底分割的精确率为0.9559,F1值为0.9473、mIoU值为0.9000,应用“去除反光点+语义分割舌体结果作为输入+数据扩充+后处理边缘膨胀腐蚀”方法获取的舌下络脉分割结果精确率为0.7784、F1值为0.7383、mIoU值为0.5851,均明显优于目前经典的或改进的U-net模型。舌下络脉颜色分类上,DenseNet161-bc-early_stopping分类模型的效果最佳,准确率达0.8037。结论深度学习方法对于识别中医舌下络脉颜色信息具有一定作用,可为中医舌下络脉诊的颜色量化检测技术研究提供新方法。