We conducted a detailed analysis of along-trench variations in the flexural bending of the subducting Pacific Plate at the Tonga-Kermadec Trench.Inversions were conducted to obtain best-fitting solutions of trench-axi...We conducted a detailed analysis of along-trench variations in the flexural bending of the subducting Pacific Plate at the Tonga-Kermadec Trench.Inversions were conducted to obtain best-fitting solutions of trench-axis loadings and variations in the effective elastic plate thickness for the analyzed flexural bending profiles.Results of the analyses revealed significant along-trench variations in plate flexural bending:the trench relief(W0)of 1.9 to 5.1 km;trench-axis vertical loading(V0)of-0.5×10^12 to 2.2×10^12 N/m;axial bending moment(M0)of 0.1×10^17 to 2.2×10^17 N;effective elastic plate thickness seaward of the outer-rise region(Te^M)of 20 to 65 km,trench-ward of the outer-rise(Te^M)of 11 to 33 km,and the transition distance(Xr)of 20 to 95 km.The Horizon Deep,the second greatest trench depth in the world,has the greatest trench relief(W0 of 5.1km)and trench-axis loading(V0 of 2.2×10^12N/m);these values are only slightly smaller than that of the Challenger Deep(W0 of 5.7km and V0 of 2.9×10^12N/m)and similar to that of the Sirena Deep(W0 of 5.2 km and V0 of 2.0×10^12 N/m)of the Mariana Trench,suggesting that these deeps are linked to great flexural bending of the subducting plates.Analyses using three independent methods,i.e.,the/inversion,the flexural curvature/yield strength envelope analysis,and the elasto-plastic bending model with normal faults,all yielded similar average Te reduction of 28%-36% and average Te reduction area S△Te of 1195-1402 km^2 near the trench axis.The calculated brittle yield zone depth from the flexural curvature/yield strength envelope analysis is also consistent with the distribution of the observed normal faulting earthquakes.Comparisons of the Manila,Philippine,Tonga-Kermadec,Japan,and Mariana Trenches revealed that the average values Te^M of Te^M and both in general increase with the subducting plate age.展开更多
The interaction between fluid and a down-pumping pitched blade turbine fixed with a flexible shaft in the stirred vessel, as a typical fluid structure interaction phenomenon, was simulated by coupling the Computationa...The interaction between fluid and a down-pumping pitched blade turbine fixed with a flexible shaft in the stirred vessel, as a typical fluid structure interaction phenomenon, was simulated by coupling the Computational Fluid Dynamics and Computational Structural Dynamics. Based on the verification of the simulated impeller torque and dimensionless shaft bending moment with experimental result, the dimensionless shaft bending moment and various loads acting on impeller(including lateral force, axial force and bending moment) were discussed in detail. By separating and extracting the fluid and structural components from those loads, the results show that the shaft bending moment mainly results from the lateral force on impeller although the axial force on impeller is much larger. The impeller mass imbalance increases the shaft bending moment and the lateral force on impeller, but has little influence on the axial force and bending moment acting on impeller. The dominant frequencies of impeller forces are macro-frequency, speed frequency and blade passing frequency, and are associated with the impeller mass imbalance.展开更多
The accuracy and effi ciency of the modelling techniques utilized to model the nonlinear behavior of structural components is a signifi cant issue in earthquake engineering. In this study, the suffi ciency of three di...The accuracy and effi ciency of the modelling techniques utilized to model the nonlinear behavior of structural components is a signifi cant issue in earthquake engineering. In this study, the suffi ciency of three diff erent modelling techniques that can be employed to simulate the structural behavior of columns is investigated. A fi ber-based fi nite length plastic hinge (FB-FLPH) model is calibrated in this study. In order to calibrate the FB-FLPH model, a novel database of the cyclic behavior of hollow steel columns under simultaneous axial and lateral loading cycles with varying amplitudes is used. By employing the FB-FLPH model calibrated in this study, the interaction of the axial force and the bending moment in columns is directly taken into account, and the deterioration in the cyclic behavior of these members is implicitly considered. The superiority of the calibrated FB-FLPH modelling approach is examined compared with the cases in which conventional fi ber-based distributed plasticity and concentrated plasticity models are utilized. The effi ciency of the enumerated modelling techniques is probed when they are implemented to model the columns of a typical special moment frame in order to prove the advantage of the FB-FLPH modelling approach.展开更多
基金The National Natural Science Foundation of China under contract Nos 41976064,91958211,41890813,91858207,91628301,U1606401,41976066 and 41706056the Programs of the Chinese Academy of Sciences under contract Nos Y4SL021001,QYZDY-SSW-DQC005 and 133244KYSB20180029+1 种基金the National Key Research and Development Program of China under contract Nos2018YFC0309800 and 2018YFC0310100the China Ocean Mineral Resources R&D Association under contract No.DY135-S2-1-04
文摘We conducted a detailed analysis of along-trench variations in the flexural bending of the subducting Pacific Plate at the Tonga-Kermadec Trench.Inversions were conducted to obtain best-fitting solutions of trench-axis loadings and variations in the effective elastic plate thickness for the analyzed flexural bending profiles.Results of the analyses revealed significant along-trench variations in plate flexural bending:the trench relief(W0)of 1.9 to 5.1 km;trench-axis vertical loading(V0)of-0.5×10^12 to 2.2×10^12 N/m;axial bending moment(M0)of 0.1×10^17 to 2.2×10^17 N;effective elastic plate thickness seaward of the outer-rise region(Te^M)of 20 to 65 km,trench-ward of the outer-rise(Te^M)of 11 to 33 km,and the transition distance(Xr)of 20 to 95 km.The Horizon Deep,the second greatest trench depth in the world,has the greatest trench relief(W0 of 5.1km)and trench-axis loading(V0 of 2.2×10^12N/m);these values are only slightly smaller than that of the Challenger Deep(W0 of 5.7km and V0 of 2.9×10^12N/m)and similar to that of the Sirena Deep(W0 of 5.2 km and V0 of 2.0×10^12 N/m)of the Mariana Trench,suggesting that these deeps are linked to great flexural bending of the subducting plates.Analyses using three independent methods,i.e.,the/inversion,the flexural curvature/yield strength envelope analysis,and the elasto-plastic bending model with normal faults,all yielded similar average Te reduction of 28%-36% and average Te reduction area S△Te of 1195-1402 km^2 near the trench axis.The calculated brittle yield zone depth from the flexural curvature/yield strength envelope analysis is also consistent with the distribution of the observed normal faulting earthquakes.Comparisons of the Manila,Philippine,Tonga-Kermadec,Japan,and Mariana Trenches revealed that the average values Te^M of Te^M and both in general increase with the subducting plate age.
基金Supported by the National Natural Science Foundation of China (21376016).
文摘The interaction between fluid and a down-pumping pitched blade turbine fixed with a flexible shaft in the stirred vessel, as a typical fluid structure interaction phenomenon, was simulated by coupling the Computational Fluid Dynamics and Computational Structural Dynamics. Based on the verification of the simulated impeller torque and dimensionless shaft bending moment with experimental result, the dimensionless shaft bending moment and various loads acting on impeller(including lateral force, axial force and bending moment) were discussed in detail. By separating and extracting the fluid and structural components from those loads, the results show that the shaft bending moment mainly results from the lateral force on impeller although the axial force on impeller is much larger. The impeller mass imbalance increases the shaft bending moment and the lateral force on impeller, but has little influence on the axial force and bending moment acting on impeller. The dominant frequencies of impeller forces are macro-frequency, speed frequency and blade passing frequency, and are associated with the impeller mass imbalance.
文摘The accuracy and effi ciency of the modelling techniques utilized to model the nonlinear behavior of structural components is a signifi cant issue in earthquake engineering. In this study, the suffi ciency of three diff erent modelling techniques that can be employed to simulate the structural behavior of columns is investigated. A fi ber-based fi nite length plastic hinge (FB-FLPH) model is calibrated in this study. In order to calibrate the FB-FLPH model, a novel database of the cyclic behavior of hollow steel columns under simultaneous axial and lateral loading cycles with varying amplitudes is used. By employing the FB-FLPH model calibrated in this study, the interaction of the axial force and the bending moment in columns is directly taken into account, and the deterioration in the cyclic behavior of these members is implicitly considered. The superiority of the calibrated FB-FLPH modelling approach is examined compared with the cases in which conventional fi ber-based distributed plasticity and concentrated plasticity models are utilized. The effi ciency of the enumerated modelling techniques is probed when they are implemented to model the columns of a typical special moment frame in order to prove the advantage of the FB-FLPH modelling approach.
