Spectral Beam Combining of Fiber Lasers by Using Reflecting Volume Bragg Gratings

By employing three reflecting volume Bragg gratings, a near-infrared 4-channel spectral-beam-combining system is demonstrated to present 720 W combined power with a combining efficiency of 94.7%. The combined laser beam is near-diffraction-limited with a beam factor M^2-1.54. During this 4-channel beam-combining process, no special active cooling measures are used to evaluate the volume Bragg gratings as combining elements are under the higher power laser operation. Thermal expansion and period distortion are verified in a 2 k W 2-channel beam-combining process, and the heat issue in the transmission case is found to be more remarkable than that in the diffraction e-se. Transmitted and diffracted beams experience wave-front aberrations with different degrees, thus leading to distinct beam deterioration.

Use of a Laser/TIG Combination for Surface Modification of Ti-6Al-4V Alloy

The surface modification of materials such as Ti-6Al-4V is necessary to improve their wear resistant properties for use in tribological applications. In this paper it is shown that a laser with low power and tungsten inert gas (TIG) can be combined together for surface modification of Ti-6Al-4V alloy, and when performed in a controlled atmosphere of pure nitrogen or a mixture of nitrogen and argon, can produce a wear-resistant surface alloy. Compared with laser processing, a cheaper surface modification process has been developed involving a shorter processing time, which is free of stringent requirements such as a vacuum system.

Fully Immersing Water-Cooled Radial Slab Laser and its Incoherent Beam Combination

A novel scheme of fully immersing water cooling is proposed for a Nd：glass radial slab laser. The slab medium is entirely immersed in the circulating water Ailing the pumping cavity, which enables much lower temperature and reasonably smaller thermal gradient in the slab medium. The radial slab is symmetrically and synchronously pumped by eight flash lamps, and produces multi-output beams with a total energy of 469md. Incoherent beam combination property of the multi-output beams is also investigated. The approach suggested here provides a way of scaling the slab lasers to much higher output levels and also a convenience for beam combinations.

Broad-area laser diodes with on-chip combined angled cavity

Semiconductor diode lasers are widely used in a variety of applications, such as pumping, telecommunication, laser display, industrial manufacturing, and medical treatments because of their high wall-plug efficiency,

Research on star-tracking correction technology for near-earth flight vehicles

By analyzing the traditional star-tracking correction technology,this paper studies the star-tracking direct correction method which is based on star sensor dynamic separation initial displacement angles and main errors of inertial measure unit（IMU） in order to carry out automatic navigation and improve the hitting accuracy and quick reaction capability of near-earth flight vehicles.Through comprehensive application and improvement of the best correction factor method,this paper proposes the startracking comprehensive correction method which combines the two methods above-mentioned and the accelerometer dynamic error separation technology.The simulation results show that obvious effects can be achieved by using the star-tracking integrated correction method.

Highly sensitive and homogeneous SERS substrate fabricated by a femtosecond laser combined with dewetting

We report a simple, cost-effective and repeatable method for fabricating a large area and uniform substrate for surface-enhanced Raman scattering(SERS). The silicon, micromachined by a femtosecond laser, is coated with gold film and then treated through the dewetting process. The morphology shows a higher electric field enhancement due to light trapping. The enhancement factor of the SERS substrate is 9.2 × 107 with a 5 nm-thick film coated. Moreover, it also exhibits a uniform signal through Raman mapping and chemical stability with the greatest intensity deviation of 6% after a month. The proposed technique provides an opportunity to equip microchips with the SERS capabilities of high sensitivity, chemical stability, and homogeneous signals.

Narrow-wavelength-spread spectral combining laser with a reflector for a double pass with a single grating

We proposed a novel wavelength-spread compression technique for spectral beam combining of a diode laser array. A reflector, which is parallel to the grating, is introduced to achieve a double pass with a single grating.This facilitated the reduction of the wavelength spread by half and doubled the number of combined elements in the gain range of the diode laser. We achieved a power of 26.1 W under continuous wave operation using a19 element single bar with a wavelength spread of 6.3 nm, which is nearly half of the original wavelength spread of 14.2 nm, demonstrating the double-compressed spectrum capability of this structure. The spectral beam combining efficiency was 63.7%. The grating efficiency and reflector reflectance were both over 95%; hence, the efficiency loss of the double-pass grating with a reflector is acceptable. In contrast to double-grating methods,the proposed method introduces a reflector that efficiently uses the single grating and shows significant potential for a more efficient spectral beam combining of diode laser arrays.

152 W high-power blue diode laser operated at 447 nm

We demonstrate a high-power blue diode laser operated at 447 nm combining laser diodes using an optical fiber bundle. As many as 127 diode lasers at 447 nm were coupled into 400 μm/0.22 NA fibers using an aspherical lens group with different focus lengths. The bare fibers were mechanically bundled through high temperature ultraviolet adhesive after the coatings of the 127 fibers were stripped. The diameter of the fiber bundle was 6 mm. The total output power of such a bundle was 152 W with electro-optical conversion efficiency of 27.56%and the RMS power instability was less than ±1% within 3 h.

THERAPEUTIC EFFECTS OF PHOTOSENSITIZERS IN COMBINATION WITH LASER AND ACNU ON AN IN VIVO OR IN VITROMODEL OF CEREBRAL GLIOMA

This study investigated the independent and combined effects of photodynamic therapy (PDT), laser photodynamic hyperthermia (LPDH) and 1-(4-amino-2-methyl-5-pyrimidinyl) methy1-3-(2-chloroethyl) -3-nitrosourea hydrochloride (ACNU) in a rat 9L induced gliosarcoma model. The mortality rate (MR60), mean survival time (MST60), and increasing life span (ILS60) within 60 days were determined to evaluate the therapeutic effect in vivo. The MR60 and MST60 of the gliosarcoma tumor control were 100% and 16.2 days. The ILS60s of PDT and ACNU were 72.84% and 49.81%, respectively, but MR60 of both were 86.72%. All combined treatments produced significantly prolonged survival (P<0.01). The combined effects of LPDH and ACNU, MR60, MST60, and ILS60 were 60%, 43 days, and 165.4%, respectively. The ILS60 of PDT+ACNU (96.48%) and PDT+LPDH (98.58%) also indicated a synergistic or additive effect. The survival fraction and synthetic rate of DNA, RNA, and protein of glioma 9L tumor cells in vitro after single treatment of PDT or combined with antitumor drugs and laser showed that the cytotoxicity of PDT to 9L tumor cell was obvious by using Rh123, HPD, and Pf-Ⅱ as photosensitizers. Combined treatments of PDT, antitumor drugs, and laser suppressed the synthesis of DNA, RNA, and protein more significantly than single treatment with PDT.