mg-Yb203 electrical contact materials were fabricated by spark plasma sintefing （SPS）. The effects of silver powder particle size on the microstructure and properties of the samples were investigated. The surface mo...mg-Yb203 electrical contact materials were fabricated by spark plasma sintefing （SPS）. The effects of silver powder particle size on the microstructure and properties of the samples were investigated. The surface morphologies of the sintered samples were examined by optical microscope （OM）, and the fracture morphologies were observed by scanning electron microscopy （SEM）. The physical and mechanical properties such as density, electrical resistivity, microhardness, and tensile strength were also tested. The results show that the silver powder particle size has evident effects on the sintered materials. Comparing with coarse silver powder （5 ktm）, homogeneous and fme microstmcture was obtained by fine silver powder （_〈0.5-1am）. At the same time, the electrical conductivity, microhardness, and tensile strength of the sin- tered samples with fine silver powder were higher than those of the samples with coarse silver powder. However, silver powder particle size has little influence on the relative densities, which of all samples （both by free and coarse silver powders） is more than 95%. The fracture characteristics are ductile.展开更多
Nano-calcium carbonate composite particles were synthesized by the soapless emulsion polymerization technique of double monomers. The composite particles formation mechanism was investigated. The effects of composite ...Nano-calcium carbonate composite particles were synthesized by the soapless emulsion polymerization technique of double monomers. The composite particles formation mechanism was investigated. The effects of composite particles on the mechanical properties of nano-CaCO3-ABS （acrylonitrile-butadiene-styrene copolymer） composite material were studied. It was validated that the composite particles are made up of the nano-calcium carbonate cores and the shells of alternating copolymers of butyl acrylate （BA） and styrene （St）. The shells are chemically grafted and physically wrapped on the surface of nano-calcium carbonate particles. When the composite particles were filled in ABS matrix, the CaCO3 particles are homogeneously dispersed in the composite material as nanoscales. The impact strength of the composite material is obviously enhanced after filling appropriate amounts of composite particles. It can be concluded that the soapless emulsion polymerization of double monomers is an effective method for nano-CaCO3 surface treatment. 2008 University of Science and Technology Beijing. All rights reserved.展开更多
Spherical micro-Ti particle(TiP)-reinforced AZ91 magnesium alloy composites were fabricated by semi-solid stirring assisted ultrasonic vibration,which were then subjected to hot extrusion.The microstructure results sh...Spherical micro-Ti particle(TiP)-reinforced AZ91 magnesium alloy composites were fabricated by semi-solid stirring assisted ultrasonic vibration,which were then subjected to hot extrusion.The microstructure results showed that the addition of Ti particles refined the grain size and decreased the texture intensity of the as-extruded AZ91 alloy.An Al3Ti phase with a thickness of 100 nm formed at the Ti/Mg interface,which had a non-coherent relationship with the magnesium matrix.The as-extruded 1 vol.%TiP/AZ91 composite exhibited the best comprehensive mechanical properties,with yield strength,ultimate tensile strength,and elongation at break of 366 MPa,456 MPa,and 14.6%,respectively,which were significantly higher than those of the AZ91 alloy.Therefore,the addition of Ti particles can improve the strength and ductility of the AZ91 alloy,demonstrating the value of magnesium matrix composites for commercial applications.展开更多
To develop new type of high damping metal matrix composites, large grain size barium titanate （BaTiO3） ceramic was sintered and added into Al powder to fabricate BaTiO3/Al composites through the powder metallurgy me...To develop new type of high damping metal matrix composites, large grain size barium titanate （BaTiO3） ceramic was sintered and added into Al powder to fabricate BaTiO3/Al composites through the powder metallurgy method and hot extrusion. The damping properties of BaTiO3 ceramic, Al matrix and BaTiO3/Al composites were examined by dynamic mechanical analysis in the temperature range from 273 K to 573 K. The results show that although BaTiO3 exhibits high damping （tan δ=0.12） below 400 K, the damping capacity of 10%BaTiO3/Al （mass fraction） composites below 400 K is not increased as compared to the Al matrix. On the other hand, the damping capacity above 450 K is greatly enhanced due to the motion of dislocations at the interfaces between ceramic particles and Al matrix. The failure of exerting the intrinsic damping of BaTiO3 particles in the composites is attributed to the poor interface bonding between the particles and the matrix. The tensile strength of the composite is 42% higher than that of the Al matrix, which indicates the possibility of obtaining high strength and high damping composites via interface improvement and the addition of high volume fraction of large grain BaTiO3 particles.展开更多
Diamond particles reinforced aluminum–silicon matrix composites,abbreviated as Al（Si）/diamond composites,were fabricated by squeeze casting.The effect of Si content on the microstructure and mechanical properties o...Diamond particles reinforced aluminum–silicon matrix composites,abbreviated as Al（Si）/diamond composites,were fabricated by squeeze casting.The effect of Si content on the microstructure and mechanical properties of the composites were investigated.The mechanical properties are found to increase monotonically with Si content increasing up to 7.0 wt%.The Al-7.0 wt% Si/diamond composite exhibits tensile strength of 78 MPa,bending strength of 230 MPa,and compressive strength of426 MPa.Al–Si eutectic phases are shown to connect with Al matrix and diamond particles tightly,which is responsible for the enhancement of mechanical properties in the Al（Si）/diamond composites.展开更多
(B4C+Al2O3)/Al composite designed for the dry storage of spent nuclear fuels was fabricated and then subjected to friction stir welding, at a welding speed of 100 mm/min and rotation rates of 400–800 r/min. Sound joi...(B4C+Al2O3)/Al composite designed for the dry storage of spent nuclear fuels was fabricated and then subjected to friction stir welding, at a welding speed of 100 mm/min and rotation rates of 400–800 r/min. Sound joints were obtained under all welding parameters;however, significant softening occurred in the nugget zone(NZ) for all the joints. Therefore, all the joints exhibited significantly decreased strength at both room temperature and high temperature compared with the base metal, with the joints fracturing in the NZs. Rotation rate exhibited no obvious effect on the tensile strength of the joints, but led to increased elongation as the result of the broadened NZs. The detailed microstructural examinations indicated that the welding thermomechanical effect broke up the near 3D amorphous Al2O3 netlike structure distributed at the Al grain boundaries, caused the coarsening of Al grains, and the agglomeration and crystallization of amorphous Al2O3, thereby resulting in the softening of the NZs and the reduction in the joint strength. Consequently, inhibiting the breakup and crystallization of 3D amorphous Al2O3 netlike structure is the key factor to improve the joint strength of the(B4C+Al2O3)/Al composite.展开更多
文摘mg-Yb203 electrical contact materials were fabricated by spark plasma sintefing （SPS）. The effects of silver powder particle size on the microstructure and properties of the samples were investigated. The surface morphologies of the sintered samples were examined by optical microscope （OM）, and the fracture morphologies were observed by scanning electron microscopy （SEM）. The physical and mechanical properties such as density, electrical resistivity, microhardness, and tensile strength were also tested. The results show that the silver powder particle size has evident effects on the sintered materials. Comparing with coarse silver powder （5 ktm）, homogeneous and fme microstmcture was obtained by fine silver powder （_〈0.5-1am）. At the same time, the electrical conductivity, microhardness, and tensile strength of the sin- tered samples with fine silver powder were higher than those of the samples with coarse silver powder. However, silver powder particle size has little influence on the relative densities, which of all samples （both by free and coarse silver powders） is more than 95%. The fracture characteristics are ductile.
基金the National Natural Science Foundation of China(No.20236020,20325621)the National R & D Program of China(No.2001BA310A01).
文摘Nano-calcium carbonate composite particles were synthesized by the soapless emulsion polymerization technique of double monomers. The composite particles formation mechanism was investigated. The effects of composite particles on the mechanical properties of nano-CaCO3-ABS （acrylonitrile-butadiene-styrene copolymer） composite material were studied. It was validated that the composite particles are made up of the nano-calcium carbonate cores and the shells of alternating copolymers of butyl acrylate （BA） and styrene （St）. The shells are chemically grafted and physically wrapped on the surface of nano-calcium carbonate particles. When the composite particles were filled in ABS matrix, the CaCO3 particles are homogeneously dispersed in the composite material as nanoscales. The impact strength of the composite material is obviously enhanced after filling appropriate amounts of composite particles. It can be concluded that the soapless emulsion polymerization of double monomers is an effective method for nano-CaCO3 surface treatment. 2008 University of Science and Technology Beijing. All rights reserved.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research (2020B0301030006)the Guangdong Academy of Sciences'Project of Science and Technology Development (2020GDASYL-20200101001).
文摘Spherical micro-Ti particle(TiP)-reinforced AZ91 magnesium alloy composites were fabricated by semi-solid stirring assisted ultrasonic vibration,which were then subjected to hot extrusion.The microstructure results showed that the addition of Ti particles refined the grain size and decreased the texture intensity of the as-extruded AZ91 alloy.An Al3Ti phase with a thickness of 100 nm formed at the Ti/Mg interface,which had a non-coherent relationship with the magnesium matrix.The as-extruded 1 vol.%TiP/AZ91 composite exhibited the best comprehensive mechanical properties,with yield strength,ultimate tensile strength,and elongation at break of 366 MPa,456 MPa,and 14.6%,respectively,which were significantly higher than those of the AZ91 alloy.Therefore,the addition of Ti particles can improve the strength and ductility of the AZ91 alloy,demonstrating the value of magnesium matrix composites for commercial applications.
基金Project (51001071) supported by the National Natural Science Foundation of China Projects (2012CB619400, 2012CB619600) supported by the National Basic Research Program of China+1 种基金Project (2010DFA52550) supported by the International S&T Cooperation Program of ChinaProject (20100470031) supported by China Postdoctoral Science Foundation
文摘To develop new type of high damping metal matrix composites, large grain size barium titanate （BaTiO3） ceramic was sintered and added into Al powder to fabricate BaTiO3/Al composites through the powder metallurgy method and hot extrusion. The damping properties of BaTiO3 ceramic, Al matrix and BaTiO3/Al composites were examined by dynamic mechanical analysis in the temperature range from 273 K to 573 K. The results show that although BaTiO3 exhibits high damping （tan δ=0.12） below 400 K, the damping capacity of 10%BaTiO3/Al （mass fraction） composites below 400 K is not increased as compared to the Al matrix. On the other hand, the damping capacity above 450 K is greatly enhanced due to the motion of dislocations at the interfaces between ceramic particles and Al matrix. The failure of exerting the intrinsic damping of BaTiO3 particles in the composites is attributed to the poor interface bonding between the particles and the matrix. The tensile strength of the composite is 42% higher than that of the Al matrix, which indicates the possibility of obtaining high strength and high damping composites via interface improvement and the addition of high volume fraction of large grain BaTiO3 particles.
基金financially supported by the National Natural Science Foundation of China (No.51271017)the Fundamental Research Funds for the Central Universities (No.FRFTP-13-033A)the Program for New Century Excellent Talents in University (No.NCET-10-0227)
文摘Diamond particles reinforced aluminum–silicon matrix composites,abbreviated as Al（Si）/diamond composites,were fabricated by squeeze casting.The effect of Si content on the microstructure and mechanical properties of the composites were investigated.The mechanical properties are found to increase monotonically with Si content increasing up to 7.0 wt%.The Al-7.0 wt% Si/diamond composite exhibits tensile strength of 78 MPa,bending strength of 230 MPa,and compressive strength of426 MPa.Al–Si eutectic phases are shown to connect with Al matrix and diamond particles tightly,which is responsible for the enhancement of mechanical properties in the Al（Si）/diamond composites.
基金supported by the National Natural Science Foundation of China (Grant Nos. U1508216,51771194)the Youth Innovation Promotion Association,CAS (Grant No. 2016179)the National Key R&D Program of China (Grant No. 2017YFB0703104)。
文摘(B4C+Al2O3)/Al composite designed for the dry storage of spent nuclear fuels was fabricated and then subjected to friction stir welding, at a welding speed of 100 mm/min and rotation rates of 400–800 r/min. Sound joints were obtained under all welding parameters;however, significant softening occurred in the nugget zone(NZ) for all the joints. Therefore, all the joints exhibited significantly decreased strength at both room temperature and high temperature compared with the base metal, with the joints fracturing in the NZs. Rotation rate exhibited no obvious effect on the tensile strength of the joints, but led to increased elongation as the result of the broadened NZs. The detailed microstructural examinations indicated that the welding thermomechanical effect broke up the near 3D amorphous Al2O3 netlike structure distributed at the Al grain boundaries, caused the coarsening of Al grains, and the agglomeration and crystallization of amorphous Al2O3, thereby resulting in the softening of the NZs and the reduction in the joint strength. Consequently, inhibiting the breakup and crystallization of 3D amorphous Al2O3 netlike structure is the key factor to improve the joint strength of the(B4C+Al2O3)/Al composite.
