Uniformity of warhead axial charge and influences of different warhead wall thicknesses on measurement results were studied by industrial computed tomography(C T).By comparing the differences of relative density value...Uniformity of warhead axial charge and influences of different warhead wall thicknesses on measurement results were studied by industrial computed tomography(C T).By comparing the differences of relative density values of the same simulation charge sample assembled in simulation bodies with different wall thicknesses,effects of warhead wall thickness on charge CT relative density values were analyzed.The results show that CT value increases by about1%with the increase of each additional1mm of wall thickness under the same simulation charge for the projectile with outer diameter of100mm and internal diameterof90mm.There fore,to detect uniformity along warhead axial(upper,middle and lower sections)charge density within penetration ability range of industrial CT(IC T),the CT values of various parts(upper,middle and lower sections)may be only measured without measuring absolute density of charge.By subtracting changes in the CT values caused by warhead wall thickness variation,the CT values of various parts under the same charge can describe warhead axial charge uniformity.展开更多
文摘Uniformity of warhead axial charge and influences of different warhead wall thicknesses on measurement results were studied by industrial computed tomography(C T).By comparing the differences of relative density values of the same simulation charge sample assembled in simulation bodies with different wall thicknesses,effects of warhead wall thickness on charge CT relative density values were analyzed.The results show that CT value increases by about1%with the increase of each additional1mm of wall thickness under the same simulation charge for the projectile with outer diameter of100mm and internal diameterof90mm.There fore,to detect uniformity along warhead axial(upper,middle and lower sections)charge density within penetration ability range of industrial CT(IC T),the CT values of various parts(upper,middle and lower sections)may be only measured without measuring absolute density of charge.By subtracting changes in the CT values caused by warhead wall thickness variation,the CT values of various parts under the same charge can describe warhead axial charge uniformity.
