Pure State Feedback Switching Control Based on the Online Estimated State for Stochastic Open Quantum Systems

For the n-qubit stochastic open quantum systems,based on the Lyapunov stability theorem and LaSalle’s invariant set principle,a pure state switching control based on on-line estimated state feedback(short for OQST-SFC)is proposed to realize the state transition the pure state of the target state including eigenstate and superposition state.The proposed switching control consists of a constant control and a control law designed based on the Lyapunov method,in which the Lyapunov function is the state distance of the system.The constant control is used to drive the system state from an initial state to the convergence domain only containing the target state,and a Lyapunov-based control is used to make the state enter the convergence domain and then continue to converge to the target state.At the same time,the continuous weak measurement of quantum system and the quantum state tomography method based on the on-line alternating direction multiplier(QST-OADM)are used to obtain the system information and estimate the quantum state which is used as the input of the quantum system controller.Then,the pure state feedback switching control method based on the on-line estimated state feedback is realized in an n-qubit stochastic open quantum system.The complete derivation process of n-qubit QST-OADM algorithm is given;Through strict theoretical proof and analysis,the convergence conditions to ensure any initial state of the quantum system to converge the target pure state are given.The proposed control method is applied to a 2-qubit stochastic open quantum system for numerical simulation experiments.Four possible different position cases between the initial estimated state and that of the controlled system are studied and discussed,and the performances of the state transition under the corresponding cases are analyzed.

Effect of Jianpi Shengxue Tablet on Iron Metabolism and Nutritional Status in Patients with Renal Anemia:A Prospective,Randomized,Open,Parallel Controlled and Multicenter Clinical Study

Objective This study aimed to analyze the clinical efficacy of the Jianpi Shengxue tablet for treating renal anemia.Methods A total of 200 patients with renal anemia from December 2020 to December 2022 were enrolled and randomly divided into two groups.Patients in the control group were treated with polysaccharide-iron complex,and those in the experimental group were administered Jianpi Shengxue tablet.After 8 weeks of continuous treatment,the therapeutic outcomes regarding anemia were compared between the two groups.Results After treatment,the red blood cell(RBC)count,hematocrit(HCT),reticulocyte percentage(RET),ferritin(SF),serum iron(SI),transferrin saturation(TSAT),and serum albumin(ALB)all increased(P<0.01),and the clinical symptom score and total iron binding capacity decreased(P<0.01)in the experimental group.Moreover,the improvements in RBC,HCT,RET,SF,SI,TAST,ALB,and clinical symptoms(fatigue,anorexia,dull skin complexion,numbness of hands and feet)in the experimental group were significantly greater than those in the control group(P<0.05).The total effective rate for treating renal anemia was significantly higher in the experimental group than in the control group(P<0.01).Conclusion The Jianpi Shengxue tablet demonstrates efficacy in treating renal anemia,leading to significant improvements in the laboratory examination results and clinical symptoms of patients with renal anemia.

开放式纯软件数控系统OpenCNC应用与实现的总体方案

文章主要介绍了纯软件数控系统OpenCNC 的基本概念、结构和方法以及在加工中心上实现该系统的初步设计方案。

Open multilevel hierarchic intelligent control system for eco-industrial system

In allusion to the characteristics of the open complex giant system, an open multilevel hierarchic intelligent control system is established for the eco-industrial system. With the idea of the open engineering system, using the hall for workshop of metasynthetic engineering （HWME）, intelligent control techniques, the expert system and the design of experiments are integrated within the framework of the nonlinear multiobjective decision support system to develop a robust, top-level design specification so as to make the system have the quality of adaptive control, self-organizing, self-learning and robustness. Finally, an illustrative example is given to clarify the effectiveness of the method.

基于RTLinux的Open CNC系统平台研究及应用

基于PC的开放式数控系统已经成为当前计算机数字控制(CNC)技术发展的必然趋势,研究了以RTLin-ux操作系统作为软件平台的纯软件开放式数控系统,提出了一种实时Linux的开放式数控系统框架,并对数控功能模块进行了系统的划分和研究,给出了基于NURBS插补算法的二维工作台的实验研究。

Realization Methodology of a 5-axis Spline Interpolator in an Open CNC System

By making use of the advantages of non-uniform rational B-spline （NURBS） curves to represent spatial curves, an instruction format with double NURBS curves suitable for 5-axis coordinated real-time interpolation is presented to replace the current 5-axis coordinated linear interpolation method defective in low-speed, low-accuracy and enormous numerical control （NC） files in sculptured surface machining. A generation procedure of the NC files with the presented format is introduced and the method to realize the interpolation in an open computer numerical control （CNC） system is developed by ourselves. These illustrated the feasibility of the proposed method and its capability of avoiding all the shortages of 5-axis linear interpolation method.

Development of a PC-based Open Architecture Software-CNC System

As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modular architecture controllers （OMAC）. First, the software and hardware platform is chosen and software realization methodology for the CNC system is determined. Second, static modeling methods of an open architecture controller inclusive of object-oriented （OO） programming technology, dynamic link library （DLL） technology and system modules partition are investigated. Third, the dynamical behavioral modeling and the data flow representation of open architecture controller are discussed, which are both described in hierarchy fmite state machine （FSM） model. Fourth, a reusable software module model is established to develop software function module library. Finally, a 3-axis milling machine tool test-bed, named for HIT-CNC, is successfully designed by means of the constructed software function module library and the system configuring method. The experimental results show that, besides increasing the degree of reusability and openness, application of above-mentioned method- ology leads to significant decrease of development time as well as maintenance cost.

可快速重组模块化OPEN CNC软件体系结构的研究

通过对数控系统开放性的讨论,借助于目前流行的软件组件开发技术,介绍了建立可快速重组OPEN CNC软件体系的方法,并给出了一个具有很高的重用度、良好的扩展性、易移植的开放式数控系统软件框架模型。

Preparation of Hadamard Gate for Open Quantum Systems by the Lyapunov Control Method

In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First, the density matrix interested in quantum system is transferred to vector formation.Then, in order to obtain a controller with higher accuracy and faster convergence rate, a Lyapunov function based on the matrix logarithm function is designed. After that, a procedure for the controller design is derived based on the Lyapunov stability theorem. Finally, the numerical simulation experiments for an amplitude damping Markovian open quantum system are performed to prepare the desired quantum gate. The simulation results show that the preparation of Hadamard gate based on the proposed control laws can achieve the fidelity up to 0.9985 for the different coupling strengths.

An Open CAM System for Dentistry on the Basis of China-made 5-axis Simultaneous Contouring CNC Machine Tool and Industrial CAM Software

China-made 5-axis simultaneous contouring CNC machine tool and domestically developed industrial computer-aided manufacture （CAM） technology were used for full crown fabrication and measurement of crown accuracy, with an attempt to establish an open CAM system for dental processing and to promote the introduction of domestic dental computer-aided design （CAD）/CAM system. Commercially available scanning equipment was used to make a basic digital tooth model after preparation of crown, and CAD software that comes with the scanning device was employed to design the crown by using domestic industrial CAM software to process the crown data in order to generate a solid model for machining purpose, and then China-made 5-axis simultaneous contouring CNC machine tool was used to complete machining of the whole crown and the internal accuracy of the crown internal was measured by using 3D-MicroCT. The results showed that China-made 5-axis simultaneous contouring CNC machine tool in combination with domestic industrial CAM technology can be used for crown making and the crown was well positioned in die. The internal accuracy was successfully measured by using 3D-MicroCT. It is concluded that an open CAM system for den-tistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and domestic industrial CAM software has been established, and development of the system will promote the introduction of domestically-produced dental CAD/CAM system.

OPEN ARCHITECTURE CNC SYSTEM HITCNC AND KEY TECHNOLOGY

Aiming at the characteristics of modularity and reconfigurable in open architecture computer numerical control （CNC） system, the open architecture CNC system, Harbin Institute of Tech- nology computer numerical control （HITCNC）, is researched and manufactured based on the interface standards. The system＇s external interfaces are coincident with the corresponding international standards, and the internal interfaces follow the open modular architecture controller （OMAC） agreement. In the research and manufacturing process, object-oriented technology is used to ensure the openness of the HITCNC, and static programming is applied in the CNC system according to the idea of modularization disassembly. The HITCNC also actualizes real-time and unreal-time modules adopting real-time dynamical linked library （RTDLL） and component object model （COM）. Finite state ma- chine （FSM） is adopted to do dynamically modeling of HITCNC. The complete separation between the software and the hardware is achieved in the HITCNC by applying the SoftSERCANS technique. The application of the above key techniques decreases the programming workload greatly, and uses software programs replacing hardware functions, which offers plenty technique ensures for the openness of HITCNC. Finally, based on the HITCNC, a three-dimensional milling system is established. On the system, series experiments are done to validate the expandability and interchangeability of HITCNC. The results of the experiments show that the established open architecture CNC system HITCNC is correct and feasible, and has good openness.

基于CNC系统的数控车床故障诊断方法

数控车床在现代制造业中扮演着重要角色,其故障诊断对于保障生产效率至关重要。提出一种基于计算机数控(Computer Numerical Control,CNC)系统的数控车床故障诊断方法,通过运行参数采集、数据预处理、特征提取和支持向量机算法,实现故障模式的智能识别。实验结果表明,该方法在故障检出率、误报率、诊断时间和准确率等方面均优于传统方法,为数控车床的智能化维护提供了新的思路,有助于提高设备的可靠性和生产效率。

Modeling Open Software Architectures of Robot Controllers: A Brief Survey of Modeling Methods and Developing Methods

Openness is one of the features of modern robot controllers. Although many modeling technologies have been discussed to model and develop open robot controllers, the focus is always on modeling methodology. The relation between the former and the latter is usually ignored. According to the general software architecture of open robot controllers, this paper discusses modeling and developing methods. And the relation between the typical ones is analyzed.

Open loop control of vortex-induced vibration of a circular cylinder

In this paper both numerical and experimental investigations have been carried out to suppress the vortex-induced vibration （VIV） of a circular cylinder in an electrically low-conducting fluid. The electromagnetic forces （Lorentz forces） in the azimuthal direction were generated through the mounted electrodes and magnets locally on the surface of the cylinder, which have been proved having an accelerating effect to the fluid on the surface of the cylinder. Results of computations are presented for synchronous vibration phenomenon of a cylinder at Re = 200, which are in good agreement with previous computational results. With the Lorentz forces loaded, the VIV of the cylinder has been suppressed successfully. Experimental results have also shown the same tendency and are in reasonable agreement with the numerical results.

Influence of homodyne-based feedback control on the entropic uncertainty in open quantum system

For an open quantum system containing two qubits under homodyne-based feedback control, we investigate the dynamical behaviors of quantum-memory-assisted entropic uncertainty.Moreover, we analyze the influence of feedback modes and coefficients on the entropic uncertainty.Numerical investigations show that the memory qubit should be placed in a non-dissipative channel if the single dissipative channel condition can be chosen, which helps reduce the entropic uncertainty of the system.For the homodyne feedback control F =λσx(or F =λσy), due to different roles of the entangled qubits A and B, when they are subject to feedback control with different feedback coefficients λ, the exchange of feedback coefficients will cause variations of the entropic uncertainty.When the feedback coefficient corresponding to the memory qubit B is larger(λB >λA), the steady value of the entropic uncertainty will be small, which is conducive to enhancing the robustness of the system.However, for the feedback control F =λσz, the difference between the feedback coefficients has no effect on the steady values of the entropic uncertainty.

OPTIMIZATION OF CUT-OFF GRADE IN OPEN-PIT BASED ON CONTROL THEORY

ＯＰＴＩＭＩＺＡＴＩＯＮＯＦＣＵＴＯＦＦＧＲＡＤＥＩＮＯＰＥＮＰＩＴＢＡＳＥＤＯＮＣＯＮＴＲＯＬＴＨＥＯＲＹ①ＸｉｅＹｉｎｇｌｉａｎｇＤｅｐａｒｔｍｅｎｔｏｆＭａｎａｇｅｍｅｎｔ，ＳｏｕｔｈＩｎｓｔｉｔｕｔｅｏｆＭｅｔａｌｕｒｇｙ，Ｇａｎｚｈｏｕ...

Open Architecture of Single-processor Real-time Robot Control System Based on Windows NT

This paper introduces the architecture and implementation of an industrial robot control system based on Windows NT. This robot control system, which is based on a single-processor structure, can run on general industrial computers. Owing to using Windows NT's real-time extension RTX, the control system can achieve good realtime performance and friendly user interface in one general-purpose operating system. A three layer hierarchical architecture of control software is proposed to make the system more scalable and flexible. Furthermore a communication and configuration system is implemented to enable modules to communicate with each other, which make the control system scalable and flexible.

Simulation on venting process and valve opening control method for gas trunk pipelines

Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.

The Modeling Strategies for Open Software Architecture of Robot Controller

Although the modeling technologies for open robot controllers have been discussed widely, not much literature is devoted to the actual general modeling principles and strategies. The reason is that many researches focus on specific application fields. This paper accommodates for this lacuna and provides some general modeling principles and strategies. At last, the actual new modeling method Hierarchical Object Oriented Petri net (HOONet) which has been proved to be an effective modeling methodology, is used to illustrate the modeling strategies.