Diagnostic efficacy of virtual organ computer-assisted analysis in measuring the volume ratio of subchorionic hematoma with serum progesterone

BACKGROUND Subchorionic hematoma(SCH)is a common complication in early pregnancy characterized by the accumulation of blood between the uterine wall and the chorionic membrane.SCH can lead to adverse pregnancy outcomes such as miscarriage,preterm birth,and other complications.Early detection and accurate assessment of SCH are crucial for appropriate management and improved pregnancy outcomes.AIM To evaluate the diagnostic efficacy of virtual organ computer-assisted analysis(VOCAL)in measuring the volume ratio of SCH to gestational sac(GS)combined with serum progesterone on early pregnancy outcomes in patients with SCH.METHODS A total of 153 patients with SCH in their first-trimester pregnancies between 6 and 11 wk were enrolled.All patients were followed up until a gestational age of 20 wk.The parameters of transvaginal two-dimensional ultrasound,including the circumference of SCH(Cs),surface area of SCH(Ss),circumference of GS(Cg),and surface area of GS(Sg),and the parameters of VOCAL with transvaginal three-dimensional ultrasound,including the three-dimensional volume of SCH(3DVs)and GS(3DVg),were recorded.The size of the SCH and its ratio to the GS size(Cs/Cg,Ss/Sg,3DVs/3DVg)were recorded and compared.RESULTS Compared with those in the normal pregnancy group,the adverse pregnancy group had higher Cs/Cg,Ss/Sg,and 3DVs/3DVg ratios(P<0.05).When 3DVs/3DVg was 0.220,the highest predictive performance predicted adverse pregnancy outcomes,resulting in an AUC of 0.767,and the sensitivity,specificity were 70.2%,75%respectively.VOCAL measuring 3DVs/3DVg combined with serum progesterone gave a diagnostic AUC of 0.824 for early pregnancy outcome in SCH patients,with a high sensitivity of 82.1%and a specificity of 72.1%,which showed a significant difference between AUC.CONCLUSION VOCAL-measured 3DVs/3DVg effectively quantifies the severity of SCH,while combined serum progesterone better predicts adverse pregnancy outcomes.

Diagnostic Accuracy of Computerized Bowel Sound Analysis with Non-Invasive Devices for Irritable Bowel Syndrome:A Systematic Review and Meta-Analysis

Objective To assess the diagnostic accuracy of bowel sound analysis for irritable bowel syndrome(IBS)with a systematic review and meta-analysis.Methods We searched MEDLINE,Embase,the Cochrane Library,Web of Science,and IEEE Xplore databases until September 2023.Cross-sectional and case-control studies on diagnostic accuracy of bowel sound analysis for IBS were identified.We estimated the pooled sensitivity,specificity,positive likelihood ratio,negative likeli-hood ratio,and diagnostic odds ratio with a 95% confidence interval(CI),and plotted a summary receiver operat-ing characteristic curve and evaluated the area under the curve.Results Four studies were included.The pooled diagnostic sensitivity,specificity,positive likelihood ratio,nega-tive likelihood ratio,and diagnostic odds ratio were 0.94(95%CI,0.87‒0.97),0.89(95%CI,0.81‒0.94),8.43(95%CI,4.81‒14.78),0.07(95%CI,0.03‒0.15),and 118.86(95%CI,44.18‒319.75),respectively,with an area under the curve of 0.97(95%CI,0.95‒0.98).Conclusions Computerized bowel sound analysis is a promising tool for IBS.However,limited high-quality data make the results'validity and applicability questionable.There is a need for more diagnostic test accuracy studies and better wearable devices for monitoring and analysis of IBS.

A comparison of conventional and computer-assisted semen analysis.（CRISMAS software） using samples from 166 young Danish men

The aim of the present study was to compare assessments of sperm concentration and sperm motility analysed by conventional semen analysis with those obtained by computer-assisted semen analysis （CASA） （Copenhagen Rigshospitalet Image House Sperm Motility Analysis System （CRISMAS） 4.6 software） using semen samples from 166 young Danish men. The CRISMAS software identifies sperm concentration and classifies spermatozoa into three motility categories. To enable comparison of the two methods, the four motility stages obtained by conventional semen analysis were, based on their velocity classifications, divided into three stages, comparable to the three CRISMAS motility categories： rapidly progressive （A）, slowly progressive （B） and non-progressive （C＋ D）. Differences between the two methods were large for all investigated parameters （P〈0.001）. CRISMAS overestimated sperm concentration and the proportion of rapidly progressive spermatozoa and, consequently, underestimated the percentages of slowly progressive and non-progressive spermatozoa, compared to the conventional method. To investigate whether results drifted according to time of semen analysis, results were pooled into quarters according to date of semen analysis. CRISMAS motility results appeared more stable over time compared to the conventional analysis; however, neither method showed any trends. Apparently, CRISMAS CASA results and results from the conventional method were not comparable with respect to sperm concentration and motility analysis. This needs to be accounted for in clinics using this software and in studies of determinants of these semen characteristics.

COMPUTER AIDED ANALYSIS FOR COLD ROLL FORMING THIN CHANNEL SECTION

Cold roll forming is a complicated metal processing, and its is very difficult to simulate the forming process. Based on the Updated-Lagrange method in the deformation mechanics, an elastic-plastic large deformation spline finite strip method is developed to analyze cold roll forming of a thin channel section. The longitudinal membrane strain values on the edge of the deformed strip for four one-pass sequences in different fold angles are got. Simulated results are compared with the results from previously conducted experiments. The deviation of the simulated peak strain values is within 30% compared with the experimental results.

Study on stability of road and bridge based on stress analysis and computer modeling

In this paper, some concepts and problems in the stress analysis design method are discussed. Based on the introduction of various types of stress characteristics, the differences between stress decomposition and stress classification are emphasized. We pointed out that the stress decomposition only relates how stress is decomposed into uniform stress, the equivalent stress distribution of linear and nonlinear stress components, how will break out of stress classification, entirely by the stress position and stress the external decision. At the same time, it also gives a valuable perspective on the distribution twe ofoeak stress, the self limitation and the stress decomposition and classification.

A two-dimensional limit equilibrium computer code for analysis of complex toppling slope failures

Evaluation of blocky or layered rock slopes against toppling failures has remained of great concern for engineers in various rock mechanics projects.Several step-by-step analytical solutions have been developed for analyzing these types of slope failures.However,manual application of these analytical solutions for real case studies can be time-consuming,complicated,and in certain cases even impossible.This study will first examine existing methods for toppling failure analyses that are reviewed,modified and generalized to consider the effects of a wide range of external and dead loads on slope stability.Next,based on the generalized presented formulae,a Windows form computer code is programmed using Visual C#for analysis of common types of toppling failures.Input parameters,including slope geometry,joint sets parameters,rock and soil properties,ground water level,dynamic loads,support anchor loads as well as magnitudes and forms of external forces,are first loaded into the code.The input data are then saved and used to graphically draw the slope model.This is followed by automatic identification of the toppling failure mode and a deterministic analysis of the slope stability against this failure mode.The results are presented using a graphical approach.The developed code allows probabilistic introduction of the input parameters via probability distribution functions(PDFs)and thus a probabilistic analysis of the toppling failure modes using Monte-Carlo simulation technique.This allows calculation of the probability of slope failure.Finally,several published case studies and typical examples are analyzed with the developed code.The outcomes are compared with those of the main references to assess the performance and robustness of the developed computer code.The comparisons demonstrate good agreement between the results.

Performance analysis model for real-time Ethernet-based computer numerical control system

In order to optimize the embedded system implementation for Ethernet-based computer numerical control （CNC） system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development.

Investigation of Computerized Dynamic Oscillographic Analysis

A high speed data sampling system on dynamic Oscillographic analysis was established with a 80386DX40 computer, AD 674 and flow injection system. Programs were designed in Microsoft Windows 3.1, that can process E-t, dE/dt-t, i'(f)-t and other kinds of curve on oscillographic analysis. A satisfactory result on determination of Pb2+ and Cd2+ was obtained.

Computer Management of Quantitative Analysis Chemistry Experiment

The application of computer in the quantitative analysis chemistry experiment is a chemistry experiment teaching applications software, developed by Visual Basic （6.0）, based on the content of quantitative analysis chemistry experiment of chemistry major in higher institute. This software has the function of the automatic processing the experimental data, the automatic generation of test report copies, and the automatic evaluation of students＇ experimental results, which solve the reliability, objectivity and accuracy problems of the students＇ experiment data processing and evaluation, and avoid interference with human factors. The software has the characteristic of the easy installation, the easy operation, the strong practicability, pertinence, the systematicness and the running stability, so it provides a platform in the quantitative analysis chemistry experiment for the students＇ assessment system of automatic processing, and it has a high popularization value. The project＇s technical route design is reasonable, the research method is correct, and the experimental data processing results are reliable, which has reached the leading domestic level in the quantitative analysis chemistry experiment teaching field of computer data processing. And this project has been through the achievements appraisal of Gansu Provincial Sci. ＆ Tech. Department.

Cryo-EM Data Statistics and Theoretical Analysis of KaiC Hexamer

Cryo-electron microscopy(cryo-EM) provides a powerful tool to resolve the structure of biological macromolecules in natural state. One advantage of cryo-EM technology is that different conformation states of a protein complex structure can be simultaneously built, and the distribution of different states can be measured. This provides a tool to push cryo-EM technology beyond just to resolve protein structures, but to obtain the thermodynamic properties of protein machines. Here, we used a deep manifold learning framework to get the conformational landscape of Kai C proteins, and further obtained the thermodynamic properties of this central oscillator component in the circadian clock by means of statistical physics.

Regionalization of epididymal duct and epithelium in rats and mice by automatic computer-aided morphometric analysis

Aim： To establish a rat and mouse epididymal map based on the use of the Epiquatre automatic software for histologic image analysis. Methods： Epididymides from five adult rats and five adult mice were fixed in alcoholic Bouin＇s fixative and embedded in paraffin. Serial longitudinal sections through the medial aspect of the organ were cut at 10 jam and stained with hematoxylin and eosin. As determined from major connective tissue septa, nine subdivisions of the rat epididymis and seven for the mouse were determined, consisting of five sub-regions in the caput （rat and mouse）, one （mouse） or three （rat） in the corpus and one in the cauda （rat and mouse）. Using the Epiquatre software, several tubular, luminal and epithelial morphometric parameters were evaluated. Results： Statistical comparison of the quantitative parameters revealed regional differences （2-5 in the rat, 3-6 in the mouse, dependent on parameters） with caput regions 1 and 2 being largely distinguishable from the similar remaining caput and corpus, which were in turn recognizable from the cauda regions in both species. Conclusion： The use of the Epiquatre software allowed us to establish regression curves for different morphometric parameters that can permit the detection of changes in their values under different pathological or experimental conditions. （Asian J Androl 2005 Sep; 7： 267-275）

Tourism Statistics and the Business Register in Italy： A Comparative Analysis and future Outlooks for Integration

After the proposal of a possible insertion of tourism statistics （supply side） （TS） into Framework Regulation Integrating Business Statistics （FR1BS） on which an interesting debate is in progress between Eurostat and NSls, Istat （Italian Institute of Statistics） has started a costs/benefits analysis of this integration. ASIA （Statistical Register of Active Enterprises）, built up by Istat, represents in Italy the official source about the structure and the economic performance of the enterprises. ASIA, whose statistical units are enterprises of industry and services, has been developed through the statistical integration of different administrative sources, other minor archives available （covering particular sectors） and structural business statistics currently produced by Istat. The supply side TS are produced by lstat through surveys via Intermediate Bodies （Local Authorities）： each Intermediate Body has its own local register of accommodation establishments based on Local Kind-of-activity unit （LKAU）. In this paper, the results of a comparative analysis between the statistical units as recorded in ASIA and as surveyed by TS are presented; from first outcomes, considerable issues about data quality appear both at level of coverage for the three Nace groups of the TS （also underlined in the Methodological Manual on Tourism Statistics where for Italy a difference of 70% is reported） and for loss information relating to the location of the activities （switching from LKAU to Enterprises） as well as for timeliness （ASIA has two years of delay）. Then, the administrative local tourism registers （LTR） are analysed to understand： how many they are, their dissemination in the Italian territories, their primary purpose and source, the variables contained, the frequency of updates. This preliminary analysis is needed to identify the operative activities that Istat, together with the Intermediate Bodies, should start to use administrative archives for statistical purposes and to develop a unique tourism satellite archive （TSA）, facing many difficulties related to the reception of several LTR as well as methodological issues for record linkage. On the other hand, a TSA would lead numerous advantages： a unique and official list of internal accommodation establishments; a step towards integration of TS into FRIBS; a starting point to begin to use also administrative data produced by the Italian Police （mandatory communications on guests in the interests of public safety）, having a comparison term to assess their coverage.

Sustainable Design of Turbofan Engine： A Computer-Aided Design and Finite Element Analysis

A compressive design and analysis of a turbofan engine is presented in this paper. The components of jet engine have been analyzed based on mechanical design concept. An attempt has been to select materials based on sustainability and green design considerations. The energy content （e） of the materials has been one of the parameters for material selection. The choice of material has a substantial impact on cost, manuthcturing process, and the life cycle efficiency. All components nose cone, fan blade, inlet shaft, including compressor has been solid modeled using Siemens NX 11.0 CAD software. The finite element analysis of every component was performed and found safe. A tolerance analysis was performed before assembly of the turbofan engine. A numerical analysis was completed on blade and inlet geometries to determine a more efficient turbofan engine. Thermal analysis was executed oi1 the cone and suitable corrections were made. Finally, the cost and the total energy were estimated to show how much energy is needed to manufacture a turbofan jet engine.

Review of Computer Vision Applications in Fabric Recognition and Color Analysis

Detecting various parameters of woven fabrics is one of the important methods to evaluate the quality of fabrics.In the early stage of industrial development,fabrics were mainly relied on manual to determine the quality,which was inefficient and unstable,so intelligent inspection is a popular development trend today.In recent years,computer vision technology has been widely used in the fields of fabric density measurement,color analysis,and weave pattern recognition.Based on the above three aspects,the advanced research progress of global researchers is reviewed in this paper and the shortcomings of current research and possible research directions in the future are analyzed.Computer vision technology is not only objective evaluation,but also has the advantages of accuracy and efficiency,and has a good development prospect in the field of textiles.

A Computer-Assisted Corpus Analysis （CACA） of Professional Discourse

This paper presents CACA （computer-assisted corpus analysis） conducted by using a compiled representative corpus. As a descriptive study, it explores the written communicative events produced by engineers in the petroleum industry in Malaysia. Language use is commonly analyzed for competence and performance. Competence is best described as the internalized linguistic knowledge as acquired by the learners while the notion of＂performance＂ is best defined as the external evidence of language competence. Therefore, the core of this paper is reflecting actual language use of the language learners in Malaysia. The data are drawn from a sample corpus compiled from the written communicative events in three companies of the petroleum industry in Malaysia. The methodology applied is fundamental as it tends to investigate the linguistic constitutions in the genre-specific corpus of the professional discourse produced. Computer-based syntactical studies are limited as they require hard work and long hours in order to key-in the data and then there is the complex analytic method of describing the findings. In contrast, this paper will demonstrate an uncomplicated method of analysis and also encourage the use of existing POS （part-of speech） tagging software available online.

Performance analysis of multi-channel order statistics detector for range-spread target

The problem of two order statistics detection schemes for the detection of a spatially distributed target in white Gaussian noise are studied.When the number of strong scattering cells is known,we first show an optimal detector,which requires many processing channels.The structure of such optimal detector is complex.Therefore,a simpler quasi-optimal detector is then introduced.The quasi-optimal detector,called the strong scattering cells’ number dependent order statistics（SND-OS） detector,takes the form of an average of maximum strong scattering cells with a known number.If the number of strong scattering cells is unknown in real situation,the multi-channel order statistics（MC-OS） detector is used.In each channel,a various number of maximums scattered from target are averaged.Then,the false alarm probability analysis and thresholds sets for each channel are given,following the detection results presented by means of Monte Carlo simulation strategy based on simulated target model and three measured targets.In particular,the theoretical analysis and simulation results highlight that the MC-OS detector can efficiently detect range-spread targets in white Gaussian noise.

Time-Variant Reliability Analysis of FPSO Hull Girder Considering Corrosion Based on Statistics

FPSO is a kind of important exploitation platform used in ocean oil and gas industry, which has the unique character of mooring at outsea for a long time. Since it can not be inspected and maintained thoronghly at dock like other kinds of ships, the reliability of FPSO hull girder during the whole service should be focused. Based on latest corrosion database and rational corrosion model, the ultimate strength of one FPSO is calculated under the conditions of slight, moderate and severe corrosion. The results not only provide the reliabihty under different corrosion conditions, but also do well for further inspection and maintenance research. The results provide necessary foundation for deciding inspection intervals and maintenance measure, which has practical sense to improve the general safety level of ocean engineering.

Computer-aided texture analysis combined with experts' knowledge: Improving endoscopic celiac disease diagnosis

AIM: To further improve the endoscopic detection of intestinal mucosa alterations due to celiac disease(CD).METHODS: We assessed a hybrid approach based on the integration of expert knowledge into the computerbased classification pipeline. A total of 2835 endoscopic images from the duodenum were recorded in 290 children using the modified immersion technique(MIT). These children underwent routine upper endoscopy for suspected CD or non-celiac upper abdominal symptoms between August 2008 and December 2014. Blinded to the clinical data and biopsy results, three medical experts visually classified each image as normal mucosa(Marsh-0) or villous atrophy(Marsh-3). The experts' decisions were further integrated into state-of-the-arttexture recognition systems. Using the biopsy results as the reference standard, the classification accuracies of this hybrid approach were compared to the experts' diagnoses in 27 different settings.RESULTS: Compared to the experts' diagnoses, in 24 of 27 classification settings(consisting of three imaging modalities, three endoscopists and three classification approaches), the best overall classification accuracies were obtained with the new hybrid approach. In 17 of 24 classification settings, the improvements achieved with the hybrid approach were statistically significant(P < 0.05). Using the hybrid approach classification accuracies between 94% and 100% were obtained. Whereas the improvements are only moderate in the case of the most experienced expert, the results of the less experienced expert could be improved significantly in 17 out of 18 classification settings. Furthermore, the lowest classification accuracy, based on the combination of one database and one specific expert, could be improved from 80% to 95%(P < 0.001).CONCLUSION: The overall classification performance of medical experts, especially less experienced experts, can be boosted significantly by integrating expert knowledge into computer-aided diagnosis systems.

The Computer Aided Integrated Design and Analysis of Oil Tank in Vehicle

This paper creates 3D solid model and assembly of U RJ 92-6 oil tank and analyses its strength by integrated CAD/CAE/CAM software I-D EAS. Through integrated simulation in computer, design efficiency and quality of oil tank is greatly improved. Adopting integrated CAD/CAE/CAM software to carry out integrated research to equ ipment and products, we will be able to take overall analysis in aspects of 3-D solid modeling, pre-assembly and strength, etc., to realize non-paper designi ng and parallel designing. Problems can be found and settled during designing, w hich will increase designing efficiency and one-time success rate and realize o ptimum designing for products.

Determination of the Early Time of Death by Computerized Image Analysis of DNA Degradation: Which Is the Best Quantitative Indicator of DNA Degradation?

This study evaluated the correlation between DNA degradation of the splenic lymphocytes and the early time of death, examined the early time of death by computerized image analysis technique （CIAT） and identified the best parameter that quantitatively reflects the DNA degradation. The spleen tissues from 34 SD rats were collected, subjected to cell smearing every 2 h within the first 36 h after death, stained by Feulgen-Van＇s staining, three indices reflecting DNA content in splenic lymphocytes, including integral optical density （IOD）, average optical density （AOD）, average gray scale （AG） were measured by the image analysis. Our results showed that IOD and AOD decreased and AG increased over time within the first 36 h. A stepwise linear regression analysis showed that only AG was fitted. A correlation between the postmortem interval （PMI） and AG was identified and the corresponding regression equation was obtained. Our study suggests that CIAT is a useful and promising tool for the estimation of early PMI with good objectivity and reproducibility, and AG is a more effective and better quantitative indicator for the estimation of PMI within the first 36 h after death in rats.