To reduce the computing time of composite computer-generated holograms （CGHs） gen- eration based upon the angular projection algorithm for holographic three-dimensional （3D） display, a grid-based holographic displ...To reduce the computing time of composite computer-generated holograms （CGHs） gen- eration based upon the angular projection algorithm for holographic three-dimensional （3D） display, a grid-based holographic display （ GHD ） scheme was designed. The grid computing technology was applied to numerically process the different angular projections of an object in distributed-parallel manner to create the corresponding CGHs. The whole treatment of a projection was regarded as a job executed on the grid node machine. The number of jobs which were submitted to grid nodes, therefore, was equal to that of the projections of the object. A Condor-based grid testbed was constructed to verify the feasibility of the GHD scheme, and a graphical user interface （GUI） program and several service modules were developed for it. A 3D terrain model as an example was processed on the testbed. The result showed that the scheme was feasible and able to improve the execution elficiency greatly.展开更多
面向机载探测系统大视场光学成像的需求,开展了大视场光学成像系统光学设计、自由曲面光学元件超精密加工、形位误差同步检测以及系统集成与成像实验研究。首先,采用视场扩展法进行大视场自由曲面离轴反射光学系统的设计;其次,进行铝合...面向机载探测系统大视场光学成像的需求,开展了大视场光学成像系统光学设计、自由曲面光学元件超精密加工、形位误差同步检测以及系统集成与成像实验研究。首先,采用视场扩展法进行大视场自由曲面离轴反射光学系统的设计;其次,进行铝合金自由曲面反射镜纳米精度加工和高频抑制工艺探索,并实现了基于计算全息元件的自由曲面形位高精度检测;最后,进行了光学系统的装调集成与成像实验。结果表明,系统的视场角为30°×5°,全视场光学传递函数值大于0.7,接近衍射极限,最大像元均方根半径为2.075μm,自由曲面光学元件的面形精度均方根(Root Mean Square,RMS)值优于20 nm,位置精度优于1μm,装配集成后能够满足大视场高分辨的场景使用要求,同时具备稳定可靠和快响制造等特点。展开更多
Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is u...Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is used to model ideal aspheric wavefront. Reflective Fresnel zones located in a ring area concentric to the CGH structure is designed to reduce or eliminate alignment errors. Substrate figure error, pattern distortion, etching and duty cycle variations that influence the reconstructed wavefront are quantitatively analyzed in theory and corresponding error equations are obtained to guide the tolerance distribution during CGH fabricating. A design example is given and the uncertainty of t achieves λ20.展开更多
A phase-only computer-generated holography（CGH） calculation method for stereoscopic holography is proposed in this paper.The two-dimensional（2D） perspective projection views of the three-dimensional（3D） object a...A phase-only computer-generated holography（CGH） calculation method for stereoscopic holography is proposed in this paper.The two-dimensional（2D） perspective projection views of the three-dimensional（3D） object are generated by the computer graphics rendering techniques.Based on these views,a phase-only hologram is calculated by using the Gerchberg–Saxton（GS） iterative algorithm.Comparing with the non-iterative algorithm in the conventional stereoscopic holography,the proposed method improves the holographic image quality,especially for the phase-only hologram encoded from the complex distribution.Both simulation and optical experiment results demonstrate that our proposed method can give higher quality reconstruction comparing with the traditional method.展开更多
We investigate the computer-generated hologram with full parallax and which can be reconstructed with white light. The object of the hologram is processed from three-dimensional computer graphics polygon data and has ...We investigate the computer-generated hologram with full parallax and which can be reconstructed with white light. The object of the hologram is processed from three-dimensional computer graphics polygon data and has shaded surface for hidden surface removal. The optically reconstructed image from the printed hologram is evaluated.展开更多
We have been studying various types of computer-generated holograms for three-dimensional （3D） displays both for a real-time holographic video display and a hard copy, or a printed hologram. For the hard copy output...We have been studying various types of computer-generated holograms for three-dimensional （3D） displays both for a real-time holographic video display and a hard copy, or a printed hologram. For the hard copy output, we have developed a direct fringe printer, which is achieved to print over 100 gigapixels computer-generated hologram with 0.44μm pitch. In this paper, we introduce our recent progresses on the rainbow hologram, the cylindrical holograms, and the disk hologram for 3D display.展开更多
In amplitude-modulation-type electroholography, the binary-weighted computer-generated hologram(BW-CGH) facilitates the gradation-expressible reconstruction of three-dimensional(3 D) objects. To realize real-time grad...In amplitude-modulation-type electroholography, the binary-weighted computer-generated hologram(BW-CGH) facilitates the gradation-expressible reconstruction of three-dimensional(3 D) objects. To realize real-time gradation-expressible electroholography, we propose an efficient and high-speed method for calculating bit planes consisting of BW-CGHs. The proposed method is implemented on a multiple graphics processing unit(GPU) cluster system comprising 13 GPUs. The proposed BW-CGH method realizes eight-gradation-expressible electroholography at approximately the same calculation speed as that of conventional electroholography based on binary computer-generated holograms. Consequently, we were able to successfully reconstruct a real-time electroholographic 3 D video comprising approximately 180,000 points expressed in eight gradations at 30 frames per second.展开更多
We propose a method for color electroholography using a simple red-green-blue （RGB） gradation representa- tion method without controlling the respective brightness of tile reference RGB-colored lights. The proposed ...We propose a method for color electroholography using a simple red-green-blue （RGB） gradation representa- tion method without controlling the respective brightness of tile reference RGB-colored lights. The proposed method uses RGB multiple bit planes comprising RGB binary-weighted computer-generated holograms with various light transmittanees. The object points of a given three-dimensional （3D） object are assigned to RGB nmltiple bit planes according to their RGB gradation levels. The RGB multiple bit planes are sequentially displayed in a tim-division-multiplexe- manner. Consequently, the proposed method yields a color gradation representation of a reconstructed 3D object.展开更多
A new method of fabricating multiple-phase-shifts fiber Bragg grating by CGHsis proposed . The authors present an example of such CGH by which a section multiple-phase-shiftefiber Bragg grating with twoπ/2 phase shif...A new method of fabricating multiple-phase-shifts fiber Bragg grating by CGHsis proposed . The authors present an example of such CGH by which a section multiple-phase-shiftefiber Bragg grating with twoπ/2 phase shifts and grating length L = 21.2 μm was produced. Theauthors describe the production process and finally give an example of a reconstructed fiber gratingwith two phase-shifts.展开更多
文摘To reduce the computing time of composite computer-generated holograms （CGHs） gen- eration based upon the angular projection algorithm for holographic three-dimensional （3D） display, a grid-based holographic display （ GHD ） scheme was designed. The grid computing technology was applied to numerically process the different angular projections of an object in distributed-parallel manner to create the corresponding CGHs. The whole treatment of a projection was regarded as a job executed on the grid node machine. The number of jobs which were submitted to grid nodes, therefore, was equal to that of the projections of the object. A Condor-based grid testbed was constructed to verify the feasibility of the GHD scheme, and a graphical user interface （GUI） program and several service modules were developed for it. A 3D terrain model as an example was processed on the testbed. The result showed that the scheme was feasible and able to improve the execution elficiency greatly.
文摘面向机载探测系统大视场光学成像的需求,开展了大视场光学成像系统光学设计、自由曲面光学元件超精密加工、形位误差同步检测以及系统集成与成像实验研究。首先,采用视场扩展法进行大视场自由曲面离轴反射光学系统的设计;其次,进行铝合金自由曲面反射镜纳米精度加工和高频抑制工艺探索,并实现了基于计算全息元件的自由曲面形位高精度检测;最后,进行了光学系统的装调集成与成像实验。结果表明,系统的视场角为30°×5°,全视场光学传递函数值大于0.7,接近衍射极限,最大像元均方根半径为2.075μm,自由曲面光学元件的面形精度均方根(Root Mean Square,RMS)值优于20 nm,位置精度优于1μm,装配集成后能够满足大视场高分辨的场景使用要求,同时具备稳定可靠和快响制造等特点。
基金the Ministerial Level Foundation (4645103030401)
文摘Design method and procedures of computer-generated hologram （CGH） used for aspheric test are in- troduced in detail. For CGH phase calculation, virtual medium which has zero refractive index at given wavelength is used to model ideal aspheric wavefront. Reflective Fresnel zones located in a ring area concentric to the CGH structure is designed to reduce or eliminate alignment errors. Substrate figure error, pattern distortion, etching and duty cycle variations that influence the reconstructed wavefront are quantitatively analyzed in theory and corresponding error equations are obtained to guide the tolerance distribution during CGH fabricating. A design example is given and the uncertainty of t achieves λ20.
基金Project supported by the National Basic Research Program of China(Grant No.2013CB328803)the National High Technology Research and Development Program of China(Grant Nos.2013AA013904 and 2015AA016301)
文摘A phase-only computer-generated holography（CGH） calculation method for stereoscopic holography is proposed in this paper.The two-dimensional（2D） perspective projection views of the three-dimensional（3D） object are generated by the computer graphics rendering techniques.Based on these views,a phase-only hologram is calculated by using the Gerchberg–Saxton（GS） iterative algorithm.Comparing with the non-iterative algorithm in the conventional stereoscopic holography,the proposed method improves the holographic image quality,especially for the phase-only hologram encoded from the complex distribution.Both simulation and optical experiment results demonstrate that our proposed method can give higher quality reconstruction comparing with the traditional method.
基金supported by the Futaba Electronics Memorial Foundation
文摘We investigate the computer-generated hologram with full parallax and which can be reconstructed with white light. The object of the hologram is processed from three-dimensional computer graphics polygon data and has shaded surface for hidden surface removal. The optically reconstructed image from the printed hologram is evaluated.
基金A part of this work was supported by JSPS KAKENHI21760265
文摘We have been studying various types of computer-generated holograms for three-dimensional （3D） displays both for a real-time holographic video display and a hard copy, or a printed hologram. For the hard copy output, we have developed a direct fringe printer, which is achieved to print over 100 gigapixels computer-generated hologram with 0.44μm pitch. In this paper, we introduce our recent progresses on the rainbow hologram, the cylindrical holograms, and the disk hologram for 3D display.
基金This work was partially supported by the Japan Society for the Promotion of Science(JSPS)KAKENHI(No.21K11996)I-O DATA Foundation.
文摘In amplitude-modulation-type electroholography, the binary-weighted computer-generated hologram(BW-CGH) facilitates the gradation-expressible reconstruction of three-dimensional(3 D) objects. To realize real-time gradation-expressible electroholography, we propose an efficient and high-speed method for calculating bit planes consisting of BW-CGHs. The proposed method is implemented on a multiple graphics processing unit(GPU) cluster system comprising 13 GPUs. The proposed BW-CGH method realizes eight-gradation-expressible electroholography at approximately the same calculation speed as that of conventional electroholography based on binary computer-generated holograms. Consequently, we were able to successfully reconstruct a real-time electroholographic 3 D video comprising approximately 180,000 points expressed in eight gradations at 30 frames per second.
基金supported by the Japan Society for the Promotion of Science through a Grant-in-Aid for Scientific Research(C)(No.15K00153)
文摘We propose a method for color electroholography using a simple red-green-blue （RGB） gradation representa- tion method without controlling the respective brightness of tile reference RGB-colored lights. The proposed method uses RGB multiple bit planes comprising RGB binary-weighted computer-generated holograms with various light transmittanees. The object points of a given three-dimensional （3D） object are assigned to RGB nmltiple bit planes according to their RGB gradation levels. The RGB multiple bit planes are sequentially displayed in a tim-division-multiplexe- manner. Consequently, the proposed method yields a color gradation representation of a reconstructed 3D object.
文摘A new method of fabricating multiple-phase-shifts fiber Bragg grating by CGHsis proposed . The authors present an example of such CGH by which a section multiple-phase-shiftefiber Bragg grating with twoπ/2 phase shifts and grating length L = 21.2 μm was produced. Theauthors describe the production process and finally give an example of a reconstructed fiber gratingwith two phase-shifts.
