The knitting industry CAD/CAM system＇s development needs a solution of computer representation of the designed objects. One of them is a transformation of knitting rows and stitches form knitting pattern and its auto...The knitting industry CAD/CAM system＇s development needs a solution of computer representation of the designed objects. One of them is a transformation of knitting rows and stitches form knitting pattern and its automatic analysis is to control data from the knitting design data. A method of the pattern CAD system including the analyzing and the compiling of the pattern data was developed in this paper. By rasterizing the pattern map, the drafted pattern could be compiled into knitting row data and stitches. The storage format of knitting rows data and stitches data could be defined by analyzing the motion of computerized fiat knitting machine. By reassembling the control data, it could be analyzed into the execute data of the controller in computerized fiat knitting machine. This method mainly focused on the weak areas of multi-needle-bed technology and fully-fashioned knitting technology in inland and could be applied to most of control systems in the master-slave mode. The knitting row data and pattern row data in a ＂ ＊. ptn＂ format file were integrated. Giving a corresponding analytic calculation process of control data and realizing independent development of the upper machine and the lower machine, the final knitting control data not only have low computation and transmission cost but also have fast transfer speeds.展开更多
A cantilever coordinate measuring machine(CCMM)is proposed according to the in-situ measurement requirement of workpieces with complex structures limited by the finite space of the5-axes computerized numerical control...A cantilever coordinate measuring machine(CCMM)is proposed according to the in-situ measurement requirement of workpieces with complex structures limited by the finite space of the5-axes computerized numerical control(CNC)processing site.Factors affecting uncertainty of measurement(UM)are classified and analyzed on the basis of uncertainty evaluation criteria,and the estimation technique of UM for measuring systems is presented.UM of the CCMM is estimated from the factors such as temperature,error motions as well as the mechanism deformations.Measurement results show that the actual measurement error is smaller than that of measurement requirement.展开更多
As the foundation of an industrialized country nowadays,machine tools industry is regarded as the engine of industrial development of a country.The developed countries,such as USA,Germany and Japan,have widely deploye...As the foundation of an industrialized country nowadays,machine tools industry is regarded as the engine of industrial development of a country.The developed countries,such as USA,Germany and Japan,have widely deployed the technology of using the patent in order to keep their strength in various fields.This research examins the CNC machine tools industry in the world by using the patent analysis method.It first gives an overview about the world patent application in CNC machine tools industry from 1963 to 2010 and divides the development of the industry into five stages.It also lists the patent application of the world top 20 countries,where the top 5 countries are compared.The patents of the world top 10 companies of machine tools manufacturers are mapped according to the international patent classification(IPC),and the future trends of world machine tools industry are discussed.Finally conclusions and suggestions are presented.展开更多
The reconstruction of images from their corresponding noisy Radon transform is a typical example of an ill-posed linear inverse problem as arising in the application of computerized tomography(CT).As the(naive)solutio...The reconstruction of images from their corresponding noisy Radon transform is a typical example of an ill-posed linear inverse problem as arising in the application of computerized tomography(CT).As the(naive)solution does not depend on the measured data continuously,regularization is needed to reestablish a continuous dependence.In this work,we investigate simple,but yet still provably convergent approaches to learning linear regularization methods from data.More specifically,we analyze two approaches:one generic linear regularization that learns how to manipulate the singular values of the linear operator in an extension of our previous work,and one tailored approach in the Fourier domain that is specific to CT-reconstruction.We prove that such approaches become convergent regularization methods as well as the fact that the reconstructions they provide are typically much smoother than the training data they were trained on.Finally,we compare the spectral as well as the Fourier-based approaches for CT-reconstruction numerically,discuss their advantages and disadvantages and investigate the effect of discretization errors at differentresolutions.展开更多
基金National Natureal Science Foundation of China(No.51305076)
文摘The knitting industry CAD/CAM system＇s development needs a solution of computer representation of the designed objects. One of them is a transformation of knitting rows and stitches form knitting pattern and its automatic analysis is to control data from the knitting design data. A method of the pattern CAD system including the analyzing and the compiling of the pattern data was developed in this paper. By rasterizing the pattern map, the drafted pattern could be compiled into knitting row data and stitches. The storage format of knitting rows data and stitches data could be defined by analyzing the motion of computerized fiat knitting machine. By reassembling the control data, it could be analyzed into the execute data of the controller in computerized fiat knitting machine. This method mainly focused on the weak areas of multi-needle-bed technology and fully-fashioned knitting technology in inland and could be applied to most of control systems in the master-slave mode. The knitting row data and pattern row data in a ＂ ＊. ptn＂ format file were integrated. Giving a corresponding analytic calculation process of control data and realizing independent development of the upper machine and the lower machine, the final knitting control data not only have low computation and transmission cost but also have fast transfer speeds.
基金National Natural Science Foundation of China(No.51375338)
文摘A cantilever coordinate measuring machine(CCMM)is proposed according to the in-situ measurement requirement of workpieces with complex structures limited by the finite space of the5-axes computerized numerical control(CNC)processing site.Factors affecting uncertainty of measurement(UM)are classified and analyzed on the basis of uncertainty evaluation criteria,and the estimation technique of UM for measuring systems is presented.UM of the CCMM is estimated from the factors such as temperature,error motions as well as the mechanism deformations.Measurement results show that the actual measurement error is smaller than that of measurement requirement.
基金Supported by Scientific Monitoring and Key Areas in-Depth Investigation and Research(No.ZD2012-4-2)Special Project of Scientific and Technological Basic Works(No.2009FY241000)Science and Technology Major Specific Project Core Electronic Elements,High-General Chips and Basic Software(No.2013XM01)
文摘As the foundation of an industrialized country nowadays,machine tools industry is regarded as the engine of industrial development of a country.The developed countries,such as USA,Germany and Japan,have widely deployed the technology of using the patent in order to keep their strength in various fields.This research examins the CNC machine tools industry in the world by using the patent analysis method.It first gives an overview about the world patent application in CNC machine tools industry from 1963 to 2010 and divides the development of the industry into five stages.It also lists the patent application of the world top 20 countries,where the top 5 countries are compared.The patents of the world top 10 companies of machine tools manufacturers are mapped according to the international patent classification(IPC),and the future trends of world machine tools industry are discussed.Finally conclusions and suggestions are presented.
基金the support of the German Research Foundation,projects BU 2327/19-1 and MO 2962/7-1support from the EPSRC grant EP/R513106/1support from the Alan Turing Institute.
文摘The reconstruction of images from their corresponding noisy Radon transform is a typical example of an ill-posed linear inverse problem as arising in the application of computerized tomography(CT).As the(naive)solution does not depend on the measured data continuously,regularization is needed to reestablish a continuous dependence.In this work,we investigate simple,but yet still provably convergent approaches to learning linear regularization methods from data.More specifically,we analyze two approaches:one generic linear regularization that learns how to manipulate the singular values of the linear operator in an extension of our previous work,and one tailored approach in the Fourier domain that is specific to CT-reconstruction.We prove that such approaches become convergent regularization methods as well as the fact that the reconstructions they provide are typically much smoother than the training data they were trained on.Finally,we compare the spectral as well as the Fourier-based approaches for CT-reconstruction numerically,discuss their advantages and disadvantages and investigate the effect of discretization errors at differentresolutions.
