In this paper we have developed a data logging and monitoring system, we validated the system by comparing the result from it with the existing one and found that the system performs slightly better than the existing ...In this paper we have developed a data logging and monitoring system, we validated the system by comparing the result from it with the existing one and found that the system performs slightly better than the existing work in the same area. This implies that the data logger and monitoring system is good and can be used to monitor solar energy variables even at the comfort of our homes. We fitted a model to the generated data and found that the meteorological variables considered accounted for 99.88% of the power output in the rainy seasons while 0.12% of the variation was not explained due to other factors. Solar panels inclined at an angle of 5° (Tilt) and facing South Pole perform optimally.展开更多
D-T_(2)two-dimensional nuclear magnetic resonance(2D NMR)logging technology can distinguish pore fluid types intuitively,and it is widely used in oil and gas exploration.Many 2D NMR inversion methods(e.g.,truncated si...D-T_(2)two-dimensional nuclear magnetic resonance(2D NMR)logging technology can distinguish pore fluid types intuitively,and it is widely used in oil and gas exploration.Many 2D NMR inversion methods(e.g.,truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization methods)have been proposed successively,but most are limited to numerical simulations.This study focused on the applicability of different inversion methods for NMR logging data of various acquisition sequences,from which the optimal inversion method was selected based on the comparative analysis.First,the two-dimensional NMR logging principle was studied.Then,these inversion methods were studied in detail,and the precision and computational efficiency of CPMG and diffusion editing(DE)sequences obtained from oil-water and gas-water models were compared,respectively.The inversion results and calculation time of truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization were compared and analyzed through numerical simulations.The inversion method was optimized to process SP mode logging data from the MR Scanner instrument.The results showed that the TIST-regularization and LM-norm smoothing methods were more accurate for the CPMG and DE sequence echo trains of the oil-water and gas-water models.However,the LM-norm smoothing method was less time-consuming,making it more suitable for logging data processing.A case study in well A25 showed that the processing results by the LM-norm smoothing method were consistent with GEOLOG software.This demonstrates that the LM-norm smoothing method is applicable in practical NMR logging processing.展开更多
为在EILog成套装备配接中子寿命测井功能,开发了中子寿命测井地面控制和数据处理系统,介绍了其软件及硬件解决方案。在详细分析中子寿命仪器数据结构的基础上,阐述了以MCU(Micro Control Unit)为核心实现PCM(Pulse Code Modulation)信...为在EILog成套装备配接中子寿命测井功能,开发了中子寿命测井地面控制和数据处理系统,介绍了其软件及硬件解决方案。在详细分析中子寿命仪器数据结构的基础上,阐述了以MCU(Micro Control Unit)为核心实现PCM(Pulse Code Modulation)信号解码的原理和方法。按不同的软件平台分层获取数据,通过底层的设备驱动程序实现对硬件的访问;通过上层的控制软件实现数据采集与处理。该系统仪器数据传输误码率低,数据采集实时性好,软件运行稳定、可靠。应用该系统配接EILog测井系统在石油工业测井计量站中子寿命标准刻度井群进行测井已获成功。展开更多
To promote adaptation of logging evaluation technologies to the development trend of unconventional oil and gas exploration and development era in China,the current situation and challenges of logging evaluation techn...To promote adaptation of logging evaluation technologies to the development trend of unconventional oil and gas exploration and development era in China,the current situation and challenges of logging evaluation technologies in China are analyzed systematically.Based on the concept of that demand drives technology development,and referring to the international leading technologies,development strategy of logging evaluation technology in China has been put forward.(1)Deepen petrophysics study:mobile 2 D NMR laboratory analysis technology for full diameter core should be developed,characteristic charts and evaluation standards of different fluid properties,different pore structures and different core exposure times should be established based on longitudinal and traverse relaxation spectra;in-depth digital rock experiment and mathematical and physical simulation research should be carried out to create innovative logging evaluation methods;acoustic and electrical anisotropy experimental analysis technology should be developed,and corresponding logging evaluation methods be innovated.(2)Strengthen target processing of logging data:precise inversion processing technology and sensitive information extraction technology of 2 D NMR logging should be developed to finely describe the micro-pore distribution in tight reservoir and accurately distinguish movable oil,bound oil,and bound water etc.The processing method of 3 D ultra-distance detection acoustic logging should be researched.(3)Develop special logging interpretation and evaluation methods:first,mathematical model for quantitatively describing the saturation distribution law of unconventional oil and gas near source and in source should be created;second,evaluation methods and standards of shale oil and deep shale gas"sweet-spots"with mobile oil content and gas content as key parameter separately should be researched vigorously;third,calculation methods of pore pressure under two high-pressure genetic mechanisms,under-compaction and hydrocarbon charging,should be improved;fourth,evaluation method of formation fracability considering the reservoir geologic and engineering quality,and optimization method of horizontal well fracturing stage and cluster based on comprehensive evaluation of stress barrier and lithologic barrier should be worked out.展开更多
文摘In this paper we have developed a data logging and monitoring system, we validated the system by comparing the result from it with the existing one and found that the system performs slightly better than the existing work in the same area. This implies that the data logger and monitoring system is good and can be used to monitor solar energy variables even at the comfort of our homes. We fitted a model to the generated data and found that the meteorological variables considered accounted for 99.88% of the power output in the rainy seasons while 0.12% of the variation was not explained due to other factors. Solar panels inclined at an angle of 5° (Tilt) and facing South Pole perform optimally.
基金sponsored by the National Natural Science Foundation of China(Nos.42174149,41774144)the National Major Projects(No.2016ZX05014-001).
文摘D-T_(2)two-dimensional nuclear magnetic resonance(2D NMR)logging technology can distinguish pore fluid types intuitively,and it is widely used in oil and gas exploration.Many 2D NMR inversion methods(e.g.,truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization methods)have been proposed successively,but most are limited to numerical simulations.This study focused on the applicability of different inversion methods for NMR logging data of various acquisition sequences,from which the optimal inversion method was selected based on the comparative analysis.First,the two-dimensional NMR logging principle was studied.Then,these inversion methods were studied in detail,and the precision and computational efficiency of CPMG and diffusion editing(DE)sequences obtained from oil-water and gas-water models were compared,respectively.The inversion results and calculation time of truncated singular value decomposition(TSVD),Butler-Reds-Dawson(BRD),LM-norm smoothing,and TIST-L1 regularization were compared and analyzed through numerical simulations.The inversion method was optimized to process SP mode logging data from the MR Scanner instrument.The results showed that the TIST-regularization and LM-norm smoothing methods were more accurate for the CPMG and DE sequence echo trains of the oil-water and gas-water models.However,the LM-norm smoothing method was less time-consuming,making it more suitable for logging data processing.A case study in well A25 showed that the processing results by the LM-norm smoothing method were consistent with GEOLOG software.This demonstrates that the LM-norm smoothing method is applicable in practical NMR logging processing.
文摘为在EILog成套装备配接中子寿命测井功能,开发了中子寿命测井地面控制和数据处理系统,介绍了其软件及硬件解决方案。在详细分析中子寿命仪器数据结构的基础上,阐述了以MCU(Micro Control Unit)为核心实现PCM(Pulse Code Modulation)信号解码的原理和方法。按不同的软件平台分层获取数据,通过底层的设备驱动程序实现对硬件的访问;通过上层的控制软件实现数据采集与处理。该系统仪器数据传输误码率低,数据采集实时性好,软件运行稳定、可靠。应用该系统配接EILog测井系统在石油工业测井计量站中子寿命标准刻度井群进行测井已获成功。
文摘To promote adaptation of logging evaluation technologies to the development trend of unconventional oil and gas exploration and development era in China,the current situation and challenges of logging evaluation technologies in China are analyzed systematically.Based on the concept of that demand drives technology development,and referring to the international leading technologies,development strategy of logging evaluation technology in China has been put forward.(1)Deepen petrophysics study:mobile 2 D NMR laboratory analysis technology for full diameter core should be developed,characteristic charts and evaluation standards of different fluid properties,different pore structures and different core exposure times should be established based on longitudinal and traverse relaxation spectra;in-depth digital rock experiment and mathematical and physical simulation research should be carried out to create innovative logging evaluation methods;acoustic and electrical anisotropy experimental analysis technology should be developed,and corresponding logging evaluation methods be innovated.(2)Strengthen target processing of logging data:precise inversion processing technology and sensitive information extraction technology of 2 D NMR logging should be developed to finely describe the micro-pore distribution in tight reservoir and accurately distinguish movable oil,bound oil,and bound water etc.The processing method of 3 D ultra-distance detection acoustic logging should be researched.(3)Develop special logging interpretation and evaluation methods:first,mathematical model for quantitatively describing the saturation distribution law of unconventional oil and gas near source and in source should be created;second,evaluation methods and standards of shale oil and deep shale gas"sweet-spots"with mobile oil content and gas content as key parameter separately should be researched vigorously;third,calculation methods of pore pressure under two high-pressure genetic mechanisms,under-compaction and hydrocarbon charging,should be improved;fourth,evaluation method of formation fracability considering the reservoir geologic and engineering quality,and optimization method of horizontal well fracturing stage and cluster based on comprehensive evaluation of stress barrier and lithologic barrier should be worked out.
