MODIFICATION THE CEMENTIOUS MATERIAL OF ULTRA-HIGH-STRENGTH SLEEPER CONCRETE

This paper presents investigation results on the natural ultra-fine mineral flour of crystalline silica fume (CSF) and porous quartz sand stone (PQSS) which can modify cement mortar strength under hydrothermal synthesis reaction (HSR) in the autoclave-cured condition. The replacement of cement by CSF and PQSS can signifi cantly increase the Jflerural and compressive strength which reach 22MPa and 150MPa respectively and de-crease the porosity oj the cement mortar. The ratio oj fine aggregation, standard sand to cementions material has sig nificant influence on the mortar strength. The mechanisms involved in cement and natural mineral flour and the HSR are presented. CaO/SiO2 ratio ranges from 3. 20 to 1. 11. the main hydrate phase is C2SH and there is not Tober-morite through X-Ray diffraction qualitative analysis. The new and ultra-high strength cementious material as basic material of sleeper concrete can he used in prestressed reinforcement sleeper concrete.

Application of International Standards in the Design of Monoblock Contrete Sleepers for Argentinian Railways

It is presented a State of the Art of international standards in the field of monoblock concrete sleepers design and calculation.Taking into account the fact that the Argentinian broad track gauge(1,676 mm)is different to international track gauge(1,435 mm)that is worldwide used,a comparative analysis is developed in order to evaluate the performance of internationals standards in the design of the sleepers used in Argentinian railways.Recommendations for future research are provided.

Experimental and parametrical investigation of pre-stressed ultrahigh-performance fiberreinforced concrete railway sleepers

In this study,ultrahigh-performance fiber-reinforced concrete(UHPFRC)used in a type B70 concrete sleeper is investigated experimentally and parametrically.The main parameters investigated are the steel fiber volume fractions(0%,0.5%,1%,and 1.5%).Under European standards,35 UHPFRC sleepers are subjected to static bending tests at the center and rail seat sections,and the screw on the fastening system is pulled out.The first cracking load,failure load,failure mode,crack propagation,load–deflection curve,load–crack width,and failure load from these tests are measured and compared with those of a control sleeper manufactured using normal concrete C50.The accuracy of the parametric study is verified experimentally.Subsequently,the results of the study are applied to UHPFRC sleepers with different concrete volumes to investigate the effects of the properties of UHPFRC on their performance.Experimental and parametric study results show that the behavior of UHPFRC sleepers improves significantly when the amount of steel fiber in the mix is increased.Sleepers manufactured using UHPFRC with a steel fiber volume fraction of 1%and a concrete volume less than 25%that of standard sleeper B70 can be used under the same loads and requirements,which contributes positively to the cost and surrounding environment.