Novel interface engineering of LDH-based materials on Mg alloy for efficient photocatalytic systems considering the geometrical linearity of condensed phosphates

This study presents a facile and rapid method for synthesizing novel Layered Double Hydroxide(LDH)nanoflakes,exploring their application as a photocatalyst,and investigating the influence of condensed phosphates'geometric linearity on their photocatalytic properties.Herein,the Mg O film,obtained by plasma electrolysis of AZ31 Mg alloys,was modified by growing an LDH film,which was further functionalized using cyclic sodium hexametaphosphate(CP)and linear sodium tripolyphosphate(LP).CP acted as an enhancer for flake spacing within the LDH structure,while LP changed flake dispersion and orientation.Consequently,CP@LDH demonstrated exceptional efficiency in heterogeneous photocatalysis,effectively degrading organic dyes like Methylene blue(MB),Congo red(CR),and Methyl orange(MO).The unique cyclic structure of CP likely enhances surface reactions and improves the catalyst's interaction with dye molecules.Furthermore,the condensed phosphate structure contributes to a higher surface area and reactivity in CP@LDH,leading to its superior photocatalytic performance compared to LP@LDH.Specifically,LP@LDH demonstrated notable degradation efficiencies of 93.02%,92.89%,and 88.81%for MB,MO,and CR respectively,over a 40 min duration.The highest degradation efficiencies were observed in the case of the CP@LDH sample,reporting 99.99%for MB,98.88%for CR,and 99.70%for MO.This underscores the potential of CP@LDH as a highly effective photocatalyst for organic dye degradation,offering promising prospects for environmental remediation and water detoxification applications.

Biochemistry and transcriptome analysis reveal condensed tannins alleviate liver injury induced by regulating cholesterol metabolism pathway

Free cholesterol has been considered to be a critical risk factor of nonalcoholic fatty liver disease(NAFLD).It remains unknown whether dietary intake of condensed tannins(CTs)have distinguishable effects to alleviate liver damage caused by a high cholesterol diet.Male C57BL/6 mice were fed a high cholesterol diet for 6 weeks,and given CTs treatment at a dosage of 200 mg/(kg·day)at the same time.The results indicated that compared with mice fed a normal diet,a high cholesterol diet group resulted in significant weight loss,dysregulation of lipid metabolism in blood and liver,and oxidative stress in the liver,but CTs treatment dramatically reversed these negative effects.Hematoxylin and eosin(H&E)staining and frozen section observation manifested that CTs treatment could effectively reduce the deposition of liver cholesterol and tissue necrosis caused by high cholesterol intake.CTs alleviated liver injury mainly by regulating the expression of related genes in cholesterol metabolism pathway and AMPK phosphorylation.Our results confirmed that CTs have remarkable cholesterol lowering and anti-liver injury effects in vivo.

Research on Condenser Deterioration Evolution Trend Based on ANP-EWM Fusion Health Degree

This study presents a proposed method for assessing the condition and predicting the future status of condensers operating in seawater over an extended period.The aim is to address the problems of scaling and corrosion,which lead to increased loss of cold resources.The method involves utilising a set of multivariate feature parameters associated with the condenser as input for evaluation and trend prediction.This methodology offers a precise means of determining the optimal timing for condenser cleaning,with the ultimate goal of improving its overall performance.The proposed approach involves the integration of the analytic network process with subjective expert experience and the entropy weightmethod with objective big data analysis to develop a fusion health degreemodel.The mathematical model is constructed quantitatively using the improved Mahalanobis distance.Furthermore,a comprehensive prediction model is developed by integrating the improved Informer model and Markov error correction.This model takes into account the health status of the equipment and several influencing factors,includingmultivariate feature characteristics.This model facilitates the objective examination and prediction of the progression of equipment deterioration trends.The present study involves the computation and verification of the field time series data,which serves to demonstrate the accuracy of the condenser health-related models proposed in this research.These models effectively depict the real condition and temporal variations of the equipment,thus offering a valuable method for determining the precise cleaning time required for the condenser.

Structural Elucidation of the Polymeric Condensed Tannins of Acacia nilotica Subspecies by ^(13)C NMR, MALDI-TOF and TMA as Sources of Bioadhesives

Tannin was extracted from different subspecies of Acacia nilotica,Acacia nilotica nilotica(Ann),Acacia nilotica tomentosa(Ant)and Acacia nilotica adansonii(Ana).The aim was to elucidate their structure and evaluate their reactivity as bioadhesives in the wood industry.The extracts were prepared by hot water extraction(90°C tem-perature).Their gel time with paraformaldehyde was used atfirst to compare their reactivity.The tannin contents and the percentage of total polyphenolic materials in different solutions of the extracts spray dried powder were determined by the hide powder method.Concentrated solutions(47%)were tested by both MALDI ToF,13CNMR.The thermomechanical analysis(TMA)was performed to evaluate their modulus of elasticity(MOE)at different pHs.The gel times of all the three tannin extracts showed that their reactivity and it was com-parable to other known procyanidin/prodelphinidin tannin extract types.Ana,Ann and Ant showed highest per-cent of total polyphenolic materials at 70%,64%,and 57%,respectively.The 13CNMR spectra showed that the three subspecies of condensed tannins were mainly constituted of procyanidins(PC)and prodelphinidins(PD)in slightly different ratios.Ann(56.5%PC and 43.4%PD),Ant(57%PC and 43%PD)and Ana(58%PC and 42%PD).MALDI–TOF spectra showed the presence offlavonoid monomers,and oligomers some of which linked to short carbohydrates monomers or dimers.TMA revealed that the three types of tannins had high MOE at their initial pH(5).

Solid-state NMR studies of proteins in condensed phases

Some proteins perform their biological functions by changing their material states through liquid-liquid phase separation.Upon phase separation,the protein condenses into a concentrated liquid phase and sometimes into a gel phase,changing its dynamic properties and intermolecular interactions,thereby regulating cellular functions.Although the biological significance of this phenomenon has been widely recognized by researchers,there is still a lack of a comprehensive understanding of the structural and dynamic properties of the protein in the condensed phase.In this phase,molecules usually contain domains with varied dynamic properties and undergo intermediate exchanges.Magic angle spinning(MAS)solid-state NMR(SSNMR)experiments are very powerful in studying rigid protein polymers such as amyloid.The incorporation of solution-like experiments into SSNMR and the development of J-coupling based MAS SSNMR techniques extend its ability to study partially mobile segments of proteins in a condensed liquid or gel phase which are not visible by solution NMR or dipolar-coupling based SSNMR.Therefore,it has been applied in studying protein condensation and has provided very important information that is hard to obtain by other techniques.

Experimental study of Al agglomeration on solid propellant burning surface and condensed combustion products

Aluminum(Al) particles are commonly added to energetic materials including propellants,explosives and pyrotechnics to increase the overall energy density of the composite,but aluminum agglomeration on the combustion surface may lower the combustion efficiency of propellants,resulting in a loss in twophase flow.Therefore,it is necessary to understand the agglomeration mechanism of aluminum particles on the combustion surface.In this paper,a high-pressure sealed combustion chamber is constructed,and high-speed camera is used to capture the whole process of aluminum accumulation,aggregation and agglomeration on the combustion surface,and the secondary agglomeration process near the combustion surface.The microscopic morphology and chemical composition of the condensed combustion products(CCPs) are then studied by using scanning electron microscopy coupled with energy dispersive(SEM-EDS) method.Results show that there are three main types of condensed combustion products:small smoke oxide particles oxidized by aluminum vapor,usually less than 1 μm;typical agglomerates formed by the combustion of aluminum agglomerates;carbonized agglomerates that are widely distributed,usually formed by irregular movements of aluminum agglomerates.The particle size of condensed combustion products is measured by laser particle size meter.As the pressure increases from 0.5 MPa to 1.0 MPa in nitrogen,the mass average particle size of aluminum agglomerates decreases by 49.7%.As the ambient gas is changed from 0.5 MPa nitrogen to 0.5 MPa air,the mass average particle size of aluminum agglomerates decreases by 67.3%.Results show that as the ambient pressure increases,the higher oxygen content can improve combustion efficiency and reduce the average agglomeration size of aluminum particles.

Ultrafast Condensed Matter Physics at Attoseconds

Our understanding of how photons couple to different degrees of freedom in solids forms the bedrock of ultrafast physics and materials sciences.In this review,the emergent ultrafast dynamics in condensed matter at the attosecond timescale have been intensively discussed.In particular,the focus is put on recent developments of attosecond dynamics of charge,exciton,and magnetism.New concepts and indispensable role of interactions among multiple degrees of freedom in solids are highlighted.Applications of attosecond electronic metrology and future prospects toward attosecond dynamics in condensed matter are further discussed.These pioneering studies promise future development of advanced attosecond science and technology such as attosecond lasers,laser medical engineering,and ultrafast electronic devices.

Review:Solar Still with Additional Condenser

Getting consumable water to individuals has been a continuous challenge worldwide.Contaminated or non⁃purified water sources are responsible for the bulk of human illnesses.The demand for water purification that does not harm the biological system is urgent.Sun⁃based desalination is one of the effective water purification methods creating ultra⁃pure refined water.Sun⁃based still refining frameworks offer maintainable devices for a freshwater generation.Diverse plans were tried by analysts to move forward the efficiency of sun⁃powered still.According to the experiments,solar still coordinates outside or inside the condenser is considered to be a valid and successful plan.This survey hopes to show,explain,and study the performance of several solar stills combined with diverse condenser designs.

Nonlinear online process monitoring and fault diagnosis of condenser based on kernel PCA plus FDA

A novel online process monitoring and fault diagnosis method of condenser based on kernel principle component analysis （KPCA） and Fisher discriminant analysis （FDA） is presented. The basic idea of this method is： First map data from the original space into high-dimensional feature space via nonlinear kernel function and then extract optimal feature vector and discriminant vector in feature space and calculate the Euclidean distance between feature vectors to perform process monitoring. Similar degree between the present discriminant vector and optimal discriminant vector of fault in historical dataset is used for diagnosis. The proposed method can effectively capture the nonlinear relationship among process variables. Simulating results of the turbo generator＇s fault data set prove that the proposed method is effective.

Air interaction around outdoor air-cooled condensers

In order to increase cooling or heating efficiency,a porous computational fluid dynamics（CFD）model is employed to predict the thermo-fluid status and optimize the placement of outdoor units.A full scale model is established to validate the accuracy of CFD simulation in terms of velocity and temperature distributions.The comparison between the measurement and the simulation shows a good agreement.By evaluating the condensers＇ sucked air temperature with CFD for three units installed in a row,it is found that the minimum separation distance among neighboring units is 0.2 m;a vertical wall should be apart from the unit line by at least 0.8 m;and large different operating pressures among units do not impact the flow rate and the heat transfer of the other units meaningfully.

Development and Application of On-Line Corrosion Monitoring Device for Condenser Tube

This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.

Fabrication of Silicon Condenser Microphone Using Oxidized Porous Silicon as Sacrificial Layer

A new technique to fabricate silicon condenser microphone is presented.The technique is based on the use of oxidized porous silicon as sacrificial layer for the air gap and the heavy p+-doping silicon of approximately 15μm thickness for the stiff backplate.The measured sensitivity of the microphone fabricated with this technique is in the range from -45dB(5.6mV/Pa) to -55dB(1.78mV/Pa) under the frequency from 500Hz to 10kHz,and shows a gradual increase at higher frequency.The cut-off frequency is above 20kHz.

Mining condensed frequent subtree base

In frequent tree pattern mining, the number of frequent subtrees generated is often too large. To tackle this problem, the concept of condensed frequent subtree base is proposed. The base consists of the maximal frequent subtrees for a series of support thresholds. It is a subset of frequent subtrees, and is used to approximate the support of arbitrary frequent subtrees with guaranteed maximal error bound. In addition, an algorithm is developed to mine such a condensed subtree base in a database of labeled rooted ordered trees. The algorithm adopts the way of fight-most extension to generate systematically all frequent rooted ordered subtrees. Several techniques are proposed to prune the branches that do not correspond to the maximal frequent subtrees. Heuristic techniques are used to arrange the order of computation so that relatively expensive computation is avoided as much as possible. Experimental results show that the size of the base is less than 10% of that of the complete set, and the algorithm outperforms the previous algorithms.

RESEARCH ON COMPLICATED DAM FOUNDATION DURING EXCAVATION WITH THREE DIMENSION VISCO ELASTIC PLASTIC CONDENSED FEM

On the basis of the two geological factors rock structure and ground stress environment,a visco elastic plastic model is established to analyze the rock stability of dam foundation and dam abutment during excavation by a kind of FE condensed method.Rock mechanics is applied in analysing the dynamic process of displacements,stresses,yielding destruction of construction base level,soft interface of dam foundation.Results of the FE analysis indicate that theories and methods in this paper are reasonable and reliable.

Adsorption behavior of condensed phosphate on aluminum hydroxide

Sodium pyrophosphate （pyro-P, Na4P2OT）, sodium tripolyphosphate （tripoly-P, Na3P3O10）, and sodium hexametaphosphate （meta-P, （NaPO3）6） were selected as the model compounds of condensed phosphate to investigate the adsorption behavior of condensed phosphate on aluminum hydroxide. The adsorption was found to be endothermic and divisible into two stages： （1） fast adsorption within 1 h; and （2） slow adsorption between 1 and 24 h. The modified Freundlich model simulated the fast adsorption stage well; the slow adsorption stage was described well by the first-order kinetics. The activation energies of pyro-P, tripoly-P, and meta-P adsorption on aluminum hydroxide were determined to be 20.2, 22.8 and 10.9 kJ/mol P adsorbed, respectively, in the fast adsorption stage and to be 66.3, 53.5 and 72.5 kJ/mol P adsorbed, respectively, in the slow adsorption stage. The adsorption increased the negative charge of the aluminum hydroxide surface. Transmission electron microscopy and energy dispersive X-ray analysis analyses provided evidence that the adsorption was not uniform on the surface and that the small crystals contributed more to the fast adsorption than the normal sites did. The results from X-ray fluorescence spectrometry and X-ray photoelectron spectroscopy tests also revealed the uneven adsorption of condensed phosphate as a function of the penetration depth. More condensed phosphates were adsorbed on the outer surface of aluminum hydroxide than in its inner parts.

Daily Variation of Natural Emission of Methane to the Atmosphere and Source Identification in the Luntai Fault Region of the Yakela Condensed Oil/Gas Field in the Tarim Basin,Xinjiang,China

The static flux chamber method was applied to study natural emissions of methane to the atmosphere in the Luntai fault region of Yakela Condensed Oil/Gas Field in the Tarim Basin, Xinjiang Municipality, northwestern China. Using an online method, which couples together a gas chromatography/high-temperature conversion/isotope ratio mass spectrometry （GC/C/MS）, 13^C/12^C ratios of methane in flux chambers were measured and showed that methane gases are liable to migrate from deep oil/gas reservoirs to the surface through fault regions and that a part of the migrated methane, which remains unoxidized can be emitted into the atmosphere. Methane emission rates were found to be highest in the mornings, lowest in the afternoons and then increase gradually in the evenings. Methane emission rates varied dramatically in different locations in the fault region. The highest methane emission rate was 10.96 mg/m^2·d, the lowest 4.38 mg/m^2, and the average 7.55 mg/ m^2·d. The 13^C/12^C ratios of the methane in the flux chambers became heavier as the enclosed methane concentrations increased gradually, which reveals that methane released from the fault region might come from thermogenic methane of the deep condensed oil/gas reservoir.

Antioxidant, antimicrobial and cytotoxic potential of condensed tannins from Leucaena leucocephala hybrid-Rendang

Condensed tannins(CTs)are one of the promising compounds due to their potentially health-promoting qualities.In this study,CTs were extracted from a Leucaena leucocephala hybrid-Rendang and subjected to various biological studies including antioxidant(using Ferric reducing antioxidant power(FRAP),DPPH and ABTS radical scavenging assay),anti-microbial(against different pathogens)and cytotoxic activities(toward human breast adenocarcinoma(MCF-7),human colon carcinoma(HT29),human cervical carcinoma(HeLa)and human liver carcinoma(HepG2)cell lines)in cancer cells through in vitro experiments.The structural characteristics and purity of CTs extract were determined using 13C NMR.The results showed that CTs exhibited higher in vitro antioxidant activities(2257.12±80.55 mg TEAC/g extract,605.3±1.82 mg TEAC/g extract and 1014.03±1.20 mg TEAC/g extract in FRAP,ABTS and DPPH assay,respectively)and demonstrated anti-microbial activities toward selected Gram’s positive and Gram’s negative bacteria tested with MIC and MBC value at 6.25–50 mg/mL.Furthermore,among other selected cancer cells,CTs also demonstrated cytotoxic activity toward human breast cancer cells(MCF-7)(IC50=38.33±2.08mg/mL).Characteristic of apoptosis such as cell shrinkage,nuclear condensation and apoptotic bodies were shown in MCF-7.These preliminary investigations have provided scientific rationale to use CTs as an alternative therapy for various oxidative and inflammatory associated diseases.©2016 Beijing Academy of Food Sciences.Production and hosting by Elsevier B.V.All rights reserved.

Geological emission of methane from the Yakela condensed oil/gas field in Talimu Basin, Xinjiang, China

A static flux chamber method was applied to study natural emissions of methane into the atmosphere in the Yakela condensed oil/gas field in Talimu Basin, Xinjiang, China. Using an online method, which couples a gas chromatography/high-temperature conversion/isotope ratio mass spectrometry (GC/C/MS) together, the 13C/12C ratios of methane in the flux chambers were measured. The results demonstrated that methane gases were liable to migrate from deep oil/gas reservoir to the surface through microseepage and p...

Entropy Assessment on Environmental Influence of Condense Heat in Recovery System in Air-Conditioning Refrigerating Machine

This paper presented an entropy evaluation method for the influences of condense heat recovery system on the environment.Aiming at the damage of the condense heat to the environment,an entropy of resource loss and an emission entropy from the condense heat recovery system in the air conditioning refrigerating machine were introduced.For the evaluation of the entropies,we developed a new algorithm for the parameter identification,called the composite influence coefficient,based on the Least Squares Support Vector Machine method.By simulation,the numerical experiments shows that the Least Squares Support Vector Machine method is one of the powerful methods for the parameter identification to compute the damage entropy of the condense heat,with the largest training error being-0.025(the relative error being-3.56%),and the biggest test error being 0.015(the relative error being 2.5%).

Synthesis and Characterization of Condensed Polynuclear Aromatic Resin Derived from Ethylene Tar

As a kind of low-cost and readily available industrial byproduct, ethylene tar （ET） was for the first time utilized for the preparation of heat-resistant condensed polynuclear aromatic resin （COPNAR）. The basic properties of ET and the resulted COPNAR were characterized by FT-IR, IH-NMR, TGA and elemental analysis. The test results showed that ET with high aromatic content （〉50%） was suitable for the synthesis of COPNAR with superior heat resistance. The average molecular structure of ET was obtained by means of the improved Brown-Ladner method, and the reaction mechanism was considered as an acid-catalyzed positive ion-typed polymerization. Our findings have provided a new route to develop ET into technology-added heat-resistant resins.