This paper reported a case of fusion between an impacted third molar and a supernumerary tooth, in which a surgical intervention was carried out, with the objective of removing the dental elements. The panoramic radio...This paper reported a case of fusion between an impacted third molar and a supernumerary tooth, in which a surgical intervention was carried out, with the objective of removing the dental elements. The panoramic radiography was complemented by the Donovan's radiographic technique; but because of the proximity of the dental element to the mandibular ramus, it was not possible to have a final fusion diagnosis. Hence, the Cone-Beam Computed Tomography--which provides precise three- dimensional information--was used to determinate the fusion diagnosis and also to help in the surgical planning. In this case report we observed that the periapical, occlusal and panoramic were not able to show details which could only be examined through the cone-beam computed tomo- graphy.展开更多
BACKGROUND Percutaneous radiofrequency ablation(RFA)is an effective treatment for unresectable hepatocellular carcinoma(HCC)and a minimally invasive alternative to hepatectomy for treating tumour recurrence.RFA is oft...BACKGROUND Percutaneous radiofrequency ablation(RFA)is an effective treatment for unresectable hepatocellular carcinoma(HCC)and a minimally invasive alternative to hepatectomy for treating tumour recurrence.RFA is often performed using contrast-enhanced computed tomography(CECT)and/or ultrasonography.In recent years,angiographic systems with flat panel image detectors and advanced image reconstruction algorithms have broadened the clinical applications of cone-beam computed tomography(CBCT),including RFA.Several studies have shown the effectiveness of using CBCT for immediate treatment assessments and follow-ups.AIM To assess the treatment response to RFA for HCC using CBCT.METHODS Forty-eight patients(44 men;aged 37-89 years)with solitary HCC[median size:3.2(1.2-6.6)cm]underwent RFA and were followed for 25.6(median;13.5-35.2)mo.Image fusion of CBCT and pre-operative CECT or magnetic resonance imaging(MRI)was used for tumour segmentation and needle path and ablation zone planning.Real-time image guidance was provided by overlaying the threedimensional image of the tumour and needle path on the fluoroscopy image.Treatment response was categorized as complete response(CR),partial response(PR),stable disease(SD),or progressive disease(PD).Disease progression,death,time to progression(TTP),and overall survival(OS)were recorded.Kaplan-Meier and Cox regression analyses were performed.RESULTS Initial post-RFA CECT/MRI showed 38 cases of CR(79.2%),10 of PR(20.8%),0 of SD,and 0 of PD,which strongly correlated with the planning estimation(42 CR,87.5%;6 PR,12.5%;0 SD;and 0 PD;accuracy:91.7%,P<0.01).Ten(20.8%)patients died,and disease progression occurred in 31(35.4%,median TTP:12.8 mo)patients,resulting in 12-,24-,and 35-mo OS rates of 100%,81.2%,and 72.2%,respectively,and progression-free survival(PFS)rates of 54.2%,37.1%,and 37.1%,respectively.The median dose-area product of the procedures was 79.05 Gy*cm2(range 40.95-146.24 Gy*cm2),and the median effective dose was 10.27 mSv(range 5.32-19.01 mSv).Tumour size<2 cm(P=0.008)was a significant factor for OS,while age(P=0.001),tumour size<2 cm(P<0.001),tumour stage(P=0.010),and initial treatment response(P=0.003)were significant factors for PFS.CONCLUSION Reliable RFA treatment planning and satisfactory outcomes can be achieved with CBCT.展开更多
As an emerging molecular imaging modality,cone-beam X-ray luminescence computed tomog-raphy(CB-XLCT)uses X-ray-excitable probes to produce near-infrared(NIR)luminescence and then reconst ructs three-dimensional(3D)dis...As an emerging molecular imaging modality,cone-beam X-ray luminescence computed tomog-raphy(CB-XLCT)uses X-ray-excitable probes to produce near-infrared(NIR)luminescence and then reconst ructs three-dimensional(3D)distribution of the probes from surface measurements.A proper photon-transportation model is critical to accuracy of XLCT.Here,we presented a systematic comparison between the common-used Monte Carlo model and simplified spherical harmonics(SPN).The performance of the two methods was evaluated over several main spec-trums using a known XLCT material.We designed both a global measurement based on the cosine similarity and a locally-averaged relative error,to quantitatively assess these methods.The results show that the SP_(3) could reach a good balance between the modeling accuracy and computational efficiency for all of the tested emission spectrums.Besides,the SP_(1)(which is equivalent to the difusion equation(DE))can be a reasonable alternative model for emission wavelength over 692nm.In vivo experiment further demonstrates the reconstruction perfor-mance of the SP:and DE.This study would provide a valuable guidance for modeling the photon-transportation in CB-XLCT.展开更多
<strong>Objectives: </strong>Odontoma is the most common type of odontogenic tumors. Many studies have analyzed the statistical associations between odontoma location and patient age and sex, according to ...<strong>Objectives: </strong>Odontoma is the most common type of odontogenic tumors. Many studies have analyzed the statistical associations between odontoma location and patient age and sex, according to the histological tumor type. However, few studies have assessed odontoma morphological characteristics using cone-beam computed tomography (CBCT). We aimed to evaluate the association between odontoma location and size. <strong>Methods:</strong> We performed CBCT on patients with odontomas (19 patients;10 women, 9 men;average age, 12.6 [range, 6 - 34] years) according to the pathology type at a university hospital between April 2008 and February 2017. The locations of the lesions were noted, and their sizes were measured on CBCT images. Buccolingual, mesiodistal, and vertical diameters of the lesions were recorded on the same slice with the greatest diameters on axial, coronal, and sagittal CBCT images. <strong>Results: </strong>Altogether, 9 (47.4%) and 10 (52.6%) odontomas were located in the mandible and maxilla, respectively. There was no significant difference in the mesiodistal and vertical diameters on the CBCT image between the mandibular and maxillary groups when the odontoma size was compared with location (p < 0.05). However, the average diameters in only the buccolingual diameter were significantly greater in the maxilla. There were no significant differences between the two groups according to sex, age, or histological type. <strong>Conclusions: </strong>These data suggest that the sizes of odontomas in the maxilla are affected by bone expansion in the buccolingual direction, but they may be invariable in most settings. Three-dimensional assessment across the age groups suggests a lack of variation in size.展开更多
Objective The aim of the study was to evaluate the coverage of the prostate when prostatic implanted fiducial markers are used to verify setup of the patients in comparison to the pelvic bones while using conebeam com...Objective The aim of the study was to evaluate the coverage of the prostate when prostatic implanted fiducial markers are used to verify setup of the patients in comparison to the pelvic bones while using conebeam computed tomography(CBCT). Methods Seventeen patients with prostate cancer were included. For each patient, daily online CBCT was done. CT planning was matched with CBCT with the help of fiducial markers(3–5 markers) and another matching with done the help of pelvic bony landmarks. Registration of clinical target volume(CTV) 1 including prostate plus seminal vesicles and CTV2 including prostate only was done and were used to confirm the target volume during the process of matching. Delineation of the rectum on every CBCT was done. Two automatic margin representing planning target volume(PTV) were created. PTV1 was generated by adding 1 cm in all directions(PTV1a) and 0.7 cm in the posterior direction(PTV1b). PTV2 was generated by adding 0.5 cm in all directions(PTV2a) and 0.3 cm in the posterior direction(PTV2b). PTV1a was prescribed to receive 46 Gy in conventional fractionation with a boost dose of 30 Gy to PTV1b. The same dose was prescribed to PTV2a and PTV2b. Calculation of the percentage of intersection between CTV1and CTV2 created on CBCT with the original CTV scan was done. A comparison between the two CTVs(CTV1and CTV2) mean dose and the original delineated CTV was done. Then a comparison to the mean dose of the original CTV of PTV1a, PTV2a(CTV1a and CTV2a), and for PTV1b and PTV2b(CTV1b and CTV2b). Calculation of the mean rectal dose and also V60, V70 and V74 was done on the delineated rectum on every CBCT, and then a comparison to the planned original rectal dose. Results The created CTV1and CTV2 intersection percentage with the original CTV1and CTV2 significantly increased by 85%(range, 65%–95%, P < 0.05), when fiducial markers were used. The main difference of the received mean dose was significantly less in comparison to pelvic bone alignment(0.03% to 2% vs 0.03% to 11.6% for PTV1a, P < 0.006;0.01% to 1.8% vs 0.03% to 10.2% for PTV2a, P < 0.014;0.08 to 2.11 vs 0.04 to 11.29 for PTV1b, P < 0.015 and 0.01 to 1.79 vs 0.01 to 9.69 for PTV2b, P < 0.004). With the use of less PTV margins, significant decrease of the rectal mean dose, V60, V70 and V74 by P < 0.004, P < 0.004, P < 0.0005 and P < 0.009, respectively. Reduction of the CTV1a and CTV1b mean dose by 1.13% and 0.28% in comparison to the initial CTV1a and CTV2a.Conclusion A significant improvement of prostatic cancer patients alignment when fiducial markers are used, with more homogenous dose distribution, and with significant decrease in PTV margins. The delivered rectal dose is significantly less allowing prostate dose escalation.展开更多
AIM:To evaluate whether intra-procedural conebeam computed tomography(CBCT)performed during modified balloon-occluded retrograde transvenous obliteration(mB RTO)can accurately determine technical success of complete v...AIM:To evaluate whether intra-procedural conebeam computed tomography(CBCT)performed during modified balloon-occluded retrograde transvenous obliteration(mB RTO)can accurately determine technical success of complete variceal obliteration.METHODS:From June 2012 to December 2014,15 patients who received CBCT during m BRTO for treatment of portal hypertensive gastric variceal bleeding were retrospectively evaluated.Three-dimensional(3D)CBCT images were performed and evaluated prior to the end of the procedure,and these were further analyzed and compared to the pre-procedure contrast-enhanced computed tomography to determine the technical success of m BRTO including:Complete occlusion/obliteration of:(1)gastrorenal shunt(GRS);(2)gastric varices;and(3)afferent feeding veins.Post-mB RTO contrast-enhanced CT was used to confirm the accuracy and diagnostic value of CBCT within 2-3 d.RESULTS:Intra-procedural 3D-CBCT images were 100% accurate in determining the technical success of m BRTO in all 15 cases.CBCT demonstrated complete occlusion/obliteration of GRS,gastric varices,collaterals and afferent feeding veins during m BRTO,which was confirmed with post-m BRTO CT.Two patients showed incomplete obliteration of gastric varices and feeding veins on CBCT,which therefore required additional gelfoam injections to complete the procedure.No patient required additional procedures or other interventions during their follow-up period(684 ± 279 d).CONCLUSION:CBCT during mB RTO appears to accurately and immediately determine the technical success of mB RTO.This may improve the technical and clinical success/outcome of m BRTO and reduce additional procedure time in the future.展开更多
Background: In dental-maxillofacial imaging, 3D sectional imaging progressively replaces conventional 2D imaging in developed countries. They are based specially on Computed tomography (CT-Scan), with the Dentascan ap...Background: In dental-maxillofacial imaging, 3D sectional imaging progressively replaces conventional 2D imaging in developed countries. They are based specially on Computed tomography (CT-Scan), with the Dentascan application and cone beam computed tomography (CBCT). In developing countries those technics are newly introduced. Aim: This study aimed at studying the knowledge and practices of dentist and oral and maxillofacial surgeons on sectional imaging such as Dentascan and Cone Beam Computed Tomography (CBCT). Materials and Methods: We conducted an anonymous survey among dentists and oral maxillofacial surgeons in Togo over one month. Results: The response rate was 78.79% (27/33). They were mainly male sex (sex ratio of 2.25 men for one woman). They were aged between 27 and 71 years old with an average of 49.69 years old. The majority (61.54%) had a professional experience over 20 years. The majority of respondents (65.38%) believed their level of knowledge about dental x-Ray was poor. Half of them (50%) confirmed that they had never asked for a Dentascan, and 15.38% asked from time to time for it and only two (7.69%) asked often for this test. 96.15% confirm they have no knowledge of the Dentascan. Regarding the CBCT, 84.62% didn’t ask for it because this technique did not exist in Togo before. 69.20% of respondents confessed to be interested in continuing training on sectional imaging. Conclusion: This study shows that sectional imaging is very little used by oral and dental practitioners in Togo because of the ignorance of the new techniques and the absence of the CBCT. It is therefore necessary to promote the teaching of the new technique of sectional imaging in the training syllabus of oral and dental specialists and to initiate continuing medical training.展开更多
Background: The vast percentage of the alveolar bone resorption process happens within the first 12 to 24 weeks post extraction;however, this phenomenon is chronic, and the alveolar ridge continues to resorb. In order...Background: The vast percentage of the alveolar bone resorption process happens within the first 12 to 24 weeks post extraction;however, this phenomenon is chronic, and the alveolar ridge continues to resorb. In order to prevent this reduction or at least recompense the loss of bone dimensions, the alveolar ridge preservation (ARP) technique was developed. Objectives: This research studied the vertical and horizontal bone dimensional changes as a result of non-molar teeth extraction alone against extraction with alveolar ridge preservation utilizing composite (bioceramics/collagen) graft by cone-beam computed tomography radiographies analyses. Material and Methods: This research was a randomized split-mouth controlled trial. 12 patients need extraction of the maxillary non-molar teeth were enrolled and allocated into 2 groups. 12 sockets after atraumatic extraction were filled with a composite graft in the role of the test group, 12 sockets left to unassisted healing after atraumatic extraction without any graft materials in the role of the control group. Two CBCT radiographs were taken at baseline and at 4 months after extraction for comparison. Both vertical and horizontal resorptions of the alveolar ridge were analyzed between test and control group by CBCT radiographs. Results: 4 months after extraction, there was a mean of vertical alveolar bone resorption compared with the baseline (0.56 ± 0.15 mm) in the test group and (1.47 ± 0.30 mm) in the control group. Whereas it was a mean of horizontal alveolar bone resorption compared with the baseline (0.90 ± 0.16 mm) in the test group and (2.26 ± 0.30 mm) in the control group. Therefore, there was a significant difference between the two groups. Conclusions: Within the limitations of this research, we demonstrated that the osteogen-plug technique significantly decreased the reduction of the bone dimensional in comparison to the tooth extraction alone, and showed that the dimensional change of the alveolar ridge after tooth extraction was minimized by using an osteogen-plug.展开更多
Objective The aim of this study was to investigate tumor volume changes with kilovoltage cone-beam computed tomography(k V-CBCT) and their dosimetric consequences for non-operative lung cancer during intensity-modulat...Objective The aim of this study was to investigate tumor volume changes with kilovoltage cone-beam computed tomography(k V-CBCT) and their dosimetric consequences for non-operative lung cancer during intensity-modulated radiotherapy(IMRT) or fractionated stereotactic radiotherapy.Methods Eighteen patients with non-operative lung cancer who received IMRT consisting of 1.8–2.2 Gy/fraction and five fractions per week or stereotactic radiotherapy with 5–8 Gy/fraction and three fractions a week were studied. k V-CBCT was performed once per week during IMRT and at every fraction during stereotactic radiotherapy. The gross tumor volume(GTV) was contoured on the k V-CBCT images,and adaptive treatment plans were created using merged k V-CBCT and primary planning computed tomography image sets. Tumor volume changes and dosimetric parameters,including the minimum dose to 95%(D95) or 1%(D1) of the planning target volume(PTV),mean lung dose(MLD),and volume of lung tissue that received more than 5(V5),10(V10),20(V20),and 30(V30) Gy were retrospectively analyzed.Results The average maximum change in GTV observed during IMRT or fractionated stereotactic radiotherapy was –25.85%(range,–13.09% ––56.76%). The D95 and D1 of PTV for the adaptive treatment plans in all patients were not significantly different from those for the initial or former adaptive treatment plans. In patients with tumor volume changes of >20% in the third or fourth week of treatment during IMRT,adaptive treatment plans offered clinically meaningful decreases in MLD and V5,V10,V20,and V30; however,in patients with tumor volume changes of < 20% in the third or fourth week of treatment as well as in patients with stereotactic radiotherapy,there were no significant or clinically meaningful decreases in the dosimetric parameters.Conclusion Adaptive treatment planning for decreasing tumor volume during IMRT may be beneficial for patients who experience tumor volume changes of >20% in the third or fourth week of treatment.展开更多
4-Dimensional cone-beam computed tomography(4D-CBCT)offers several key advantages over conventional 3DCBCT in moving target localization/delineation,structure de-blurring,target motion tracking,treatment dose accumul...4-Dimensional cone-beam computed tomography(4D-CBCT)offers several key advantages over conventional 3DCBCT in moving target localization/delineation,structure de-blurring,target motion tracking,treatment dose accumulation and adaptive radiation therapy.However,the use of the 4D-CBCT in current radiation therapy practices has been limited,mostly due to its sub-optimal image quality from limited angular sampling of conebeam projections.In this study,we summarized the recent developments of 4D-CBCT reconstruction techniques for image quality improvement,and introduced our developments of a new 4D-CBCT reconstruction technique which features simultaneous motion estimation and image reconstruction(SMEIR).Based on the original SMEIR scheme,biomechanical modeling-guided SMEIR(SMEIR-Bio)was introduced to further improve the reconstruction accuracy of fine details in lung 4D-CBCTs.To improve the efficiency of reconstruction,we recently developed a U-net-based deformation-vector-field(DVF)optimization technique to leverage a population-based deep learning scheme to improve the accuracy of intra-lung DVFs(SMEIR-Unet),without explicit biomechanical modeling.Details of each of the SMEIR,SMEIR-Bio and SMEIR-Unet techniques were included in this study,along with the corresponding results comparing the reconstruction accuracy in terms of CBCT images and the DVFs.We also discussed the application prospects of the SMEIR-type techniques in image-guided radiation therapy and adaptive radiation therapy,and presented potential schemes on future developments to achieve faster and more accurate 4D-CBCT imaging.展开更多
Aim The purpose of this study was to conduct quantitative research on bone height and bone mineral density of palatal implant sites for implantation, and to provide reference sites for safe and stable palatal implants...Aim The purpose of this study was to conduct quantitative research on bone height and bone mineral density of palatal implant sites for implantation, and to provide reference sites for safe and stable palatal implants. Methodology Three-dimensional reformatting images were reconstructed by cone beam computed tomography (CBCT) in 34 patients, aged 18 to 35 years, using EZ Implant software. Bone height was measured at 20 sites of interest on the palate. Bone mineral density was measured at the 10 sites with the highest implantation rate, classified using K-mean cluster analysis based on bone height and bone mineral density. Results According to the cluster analysis, 10 sites were classified into three clusters. Significant differences in bone height and bone mineral density were detected between these three clusters (P〈0.05). The greatest bone height was obtained in cluster 2, followed by cluster 1 and cluster 3. The highest bone mineral density was found in cluster 3, followed by cluster 1 and cluster 2. Conclusion CBCT plays an important role in pre-surgical treatment planning. CBCT is helpful in identifying safe and stable implantation sites for palatal anchorage.展开更多
Cone beam computed tomography(CBCT) has often been used to determine the quality of craniofacial bone structures through the determination of mineral density, which is based on gray scales of the images obtained. Howe...Cone beam computed tomography(CBCT) has often been used to determine the quality of craniofacial bone structures through the determination of mineral density, which is based on gray scales of the images obtained. However, there is no consensus regarding the accuracy of the determination of the gray scales in these exams. This study aims to provide a literature review concerning the reliability of CBCT to determine bone mineral density. The gray values obtained with CBCT show a linear relationship with the attenuation coefficients of the materials, Hounsfield Units values obtained with medical computed tomography, and density values from dual energy X-ray absorciometry. However, errors are expected when CBCT images are used to define the quality of the scanned structures be-cause these images show inconsistencies and arbitrari-ness in the gray values, particularly when related to abrupt change in the density of the object, X-ray beam hardening effect, scattered radiation, projection data discontinuity-related effect, differences between CBCTdevices, changes in the volume of the field of view(FOV), and changes in the relationships of size and position between the FOV and the object evaluated. A few methods of mathematical correction of the gray scales in CBCT have been proposed; however, they do not generate consistent values that are independent of the devices and their configurations or of the scanned objects. Thus, CBCT should not be considered the ex-amination of choice for the determination of bone and soft tissue mineral density at the current stage, par-ticularly when values obtained are to be compared to predetermined standard values. Comparisons between symmetrically positioned structures inside the FOV and in relation to the exomass of the object, as it occurs with the right and left sides of the skull, seem to be viable because the effects on the gray scale in the re-gions of interest are the same.展开更多
To provide an anatomical basis for clinical implant esthetics,we evaluated the morphology of the nasopalatine canal(NPC) and analyzed labial and interproximal bone anatomy at the maxillary anterior region.We sought ...To provide an anatomical basis for clinical implant esthetics,we evaluated the morphology of the nasopalatine canal(NPC) and analyzed labial and interproximal bone anatomy at the maxillary anterior region.We sought to investigate the effect of maxillary protrusion and tooth labiolingual inclination on labial bone anatomy in Chinese adults.Three dimensional(3D) images were reconstructed using cone-beam computed tomography(CBCT) images from 80 Chinese subjects and by SimPlant 11.04.The dimensions of the NPC,the thickness and profile of the labial bone,the width and height of the interproximal bone,angle sella-nasion-subspinale(SNA) and angle upper central incisor-nasion,subspinale(U1-NA) were measured.The incisive foramen of the NPC was markedly wider than its nasal foramen.The dimension of its labial bone wall demonstrated an increasing width from the crestal to apical measurements.The labial bone at the maxillary anterior region was rather thin,especially at 3 mm below the cemento-enamel junction(CEJ) and the mid-root level;the profile of the labial bone was more curved at the central incisor,and the interproximal bone became wider and shorter posteriorly.There were significant relationships between maxillary protrusion and labial bone profile,tooth labiolingual inclination and labial bone thickness(P 〈 0.02).To achieve optimal esthetic outcome of implant,bone augmentation is necessary at the maxillary anterior region.For immediate or early placement at the maxillary anterior region,the implant should be located palatally to reduce labial bone resorption and marginal recession;its apex should be angulated palatally to avoid labial perforation at the apical region.To protect the NPC,implants at the central incisor region should be placed away from NPC.展开更多
BACKGROUND Fused teeth usually involve several complications,such as the development of caries in the groove between fused crowns,tooth impaction,diastemas,aesthetic and periodontal problems,and pulpal pathosis,due to...BACKGROUND Fused teeth usually involve several complications,such as the development of caries in the groove between fused crowns,tooth impaction,diastemas,aesthetic and periodontal problems,and pulpal pathosis,due to the complex anatomical structure of fused teeth.A thorough diagnosis is paramount to forming an accurate treatment plan and obtaining a favourable prognosis.With the advent of cone-beam computed tomography(CBCT),accurate 3-dimensional images of teeth and their surrounding dentoalveolar structures can now be readily obtained,and the technology can accurately provide a minimally invasive approach to acquire detailed diagnostic information.Therefore,we utilize CBCT data herein to generate a digital model for the infected region in a patient,and this model enables us to better plan the management of his case.CASE SUMMARY This report details the diagnosis and endodontic treatment of a rare case involving a fused maxillary second molar and two paramolars with apical periodontitis.The patient experienced pain upon biting and cold sensitivity in the area of the maxillary left molar.No caries or other defects were identified in these teeth,and a normal response to a pulp electric viability test was observed.With the aid of CBCT and digital model technology,we initially suspected that the infection originated from the isthmus between the maxillary second molar and two paramolars.Therefore,we only treated the isthmus by an endodontic approach and did not destroy the original tooth structure;furthermore,the vital pulp was retained,and good treatment outcomes were observed at the 24-month follow-up.CONCLUSION This finding may provide new insights and perspectives on the diagnosis and treatment of fused teeth.展开更多
Nearly two decades since Cone Beam-Computed Tomography (CBCT) was introduced in dentistry, this technology has been proven to be a useful asset in modern dental practice. The information gleaned from a CBCT scan influ...Nearly two decades since Cone Beam-Computed Tomography (CBCT) was introduced in dentistry, this technology has been proven to be a useful asset in modern dental practice. The information gleaned from a CBCT scan influences treatment decisions and prognostication of challenging endodontic cases. The authors present six cases that utilized CBCT to diagnose vertical root fracture, to assess resorption, to guide the clinician in overcoming anatomical complexities, to hurdle diagnostic dilemmas and to perform pre-surgical evaluation. Initially, a thorough clinical assessment was performed;however, conventional periapical radiographs were not able to provide sufficient information to arrive at a definite diagnosis or a thorough treatment plan. CBCT was therefore deemed helpful for these cases. Clearly, there are advantages to using CBCT. With a better understanding of each case, the clinician can plan a definitive treatment plan and offer a clearer case prognosis to their patient.展开更多
Facial imaging is used to study the facial shapeand its developmental changes over time.This isimportant to diagnose acquired malformations,to studynormal and abnormal growth and to differentiatebetween the results of...Facial imaging is used to study the facial shapeand its developmental changes over time.This isimportant to diagnose acquired malformations,to studynormal and abnormal growth and to differentiatebetween the results of treatment and normal growth,and to validate facial recognition.The two mainmethods to study and record facial imaging are bymeans of cephalometry and anthropometry[1].Cephalometrics is the scientific study of themeasurements of the展开更多
Cone-beam computed tomography(CBCT) was developed and introduced specifically for dento-maxillofacial imaging. CBCT possesses a number of advantages over medical CT in clinical practice, such as lower effective radiat...Cone-beam computed tomography(CBCT) was developed and introduced specifically for dento-maxillofacial imaging. CBCT possesses a number of advantages over medical CT in clinical practice, such as lower effective radiation doses, lower costs, fewer space requirements,easier image acquisition, and interactive display modes such as mutiplanar reconstruction that are applicable to maxillofacial imaging. However, the disadvantages of CBCT include higher doses than two-dimensional imaging; the inability to accurately represent the internal structure of soft tissues and soft-tissue lesions; a limited correlation with Hounsfield Units for standardized quantification of bone density; and the presence of various types of image artifacts, mainly those produced by metal restorations. CBCT is now commonly used for a variety of purposes in oral implantology, dentomaxillofacial surgery, image-guided surgical procedures, endodontics, periodontics and orthodontics. CBCT applications provide obvious benefits in the assessment of dentomaxillofacial region, however; it should be used only in correct indications considering the necessity and the potential hazards of the examination.展开更多
文摘This paper reported a case of fusion between an impacted third molar and a supernumerary tooth, in which a surgical intervention was carried out, with the objective of removing the dental elements. The panoramic radiography was complemented by the Donovan's radiographic technique; but because of the proximity of the dental element to the mandibular ramus, it was not possible to have a final fusion diagnosis. Hence, the Cone-Beam Computed Tomography--which provides precise three- dimensional information--was used to determinate the fusion diagnosis and also to help in the surgical planning. In this case report we observed that the periapical, occlusal and panoramic were not able to show details which could only be examined through the cone-beam computed tomo- graphy.
文摘BACKGROUND Percutaneous radiofrequency ablation(RFA)is an effective treatment for unresectable hepatocellular carcinoma(HCC)and a minimally invasive alternative to hepatectomy for treating tumour recurrence.RFA is often performed using contrast-enhanced computed tomography(CECT)and/or ultrasonography.In recent years,angiographic systems with flat panel image detectors and advanced image reconstruction algorithms have broadened the clinical applications of cone-beam computed tomography(CBCT),including RFA.Several studies have shown the effectiveness of using CBCT for immediate treatment assessments and follow-ups.AIM To assess the treatment response to RFA for HCC using CBCT.METHODS Forty-eight patients(44 men;aged 37-89 years)with solitary HCC[median size:3.2(1.2-6.6)cm]underwent RFA and were followed for 25.6(median;13.5-35.2)mo.Image fusion of CBCT and pre-operative CECT or magnetic resonance imaging(MRI)was used for tumour segmentation and needle path and ablation zone planning.Real-time image guidance was provided by overlaying the threedimensional image of the tumour and needle path on the fluoroscopy image.Treatment response was categorized as complete response(CR),partial response(PR),stable disease(SD),or progressive disease(PD).Disease progression,death,time to progression(TTP),and overall survival(OS)were recorded.Kaplan-Meier and Cox regression analyses were performed.RESULTS Initial post-RFA CECT/MRI showed 38 cases of CR(79.2%),10 of PR(20.8%),0 of SD,and 0 of PD,which strongly correlated with the planning estimation(42 CR,87.5%;6 PR,12.5%;0 SD;and 0 PD;accuracy:91.7%,P<0.01).Ten(20.8%)patients died,and disease progression occurred in 31(35.4%,median TTP:12.8 mo)patients,resulting in 12-,24-,and 35-mo OS rates of 100%,81.2%,and 72.2%,respectively,and progression-free survival(PFS)rates of 54.2%,37.1%,and 37.1%,respectively.The median dose-area product of the procedures was 79.05 Gy*cm2(range 40.95-146.24 Gy*cm2),and the median effective dose was 10.27 mSv(range 5.32-19.01 mSv).Tumour size<2 cm(P=0.008)was a significant factor for OS,while age(P=0.001),tumour size<2 cm(P<0.001),tumour stage(P=0.010),and initial treatment response(P=0.003)were significant factors for PFS.CONCLUSION Reliable RFA treatment planning and satisfactory outcomes can be achieved with CBCT.
基金the School of Life Science and Technology of Xidian University for providing experimental data acquisition system.This work was supported by the National Natural Science Foundation of China under Grant(Nos.61372046,61401264,11571012,61601363,61640418,61572400)the Science and Technology Plan Program in Shaanxi Province of China under Grant(Nos.2013K12-20-12,2015KW-002)+2 种基金the Natural Science Research Plan Program in Shaanxi Province of China under Grant(No.2015JM6322)the Scienti¯c Research Founded by Shaanxi Provincial Education Department under Grant No.16JK1772the Scienti¯c Research Foundation of Northwest University under Grant Nos.338050018 and 338020012.
文摘As an emerging molecular imaging modality,cone-beam X-ray luminescence computed tomog-raphy(CB-XLCT)uses X-ray-excitable probes to produce near-infrared(NIR)luminescence and then reconst ructs three-dimensional(3D)distribution of the probes from surface measurements.A proper photon-transportation model is critical to accuracy of XLCT.Here,we presented a systematic comparison between the common-used Monte Carlo model and simplified spherical harmonics(SPN).The performance of the two methods was evaluated over several main spec-trums using a known XLCT material.We designed both a global measurement based on the cosine similarity and a locally-averaged relative error,to quantitatively assess these methods.The results show that the SP_(3) could reach a good balance between the modeling accuracy and computational efficiency for all of the tested emission spectrums.Besides,the SP_(1)(which is equivalent to the difusion equation(DE))can be a reasonable alternative model for emission wavelength over 692nm.In vivo experiment further demonstrates the reconstruction perfor-mance of the SP:and DE.This study would provide a valuable guidance for modeling the photon-transportation in CB-XLCT.
文摘<strong>Objectives: </strong>Odontoma is the most common type of odontogenic tumors. Many studies have analyzed the statistical associations between odontoma location and patient age and sex, according to the histological tumor type. However, few studies have assessed odontoma morphological characteristics using cone-beam computed tomography (CBCT). We aimed to evaluate the association between odontoma location and size. <strong>Methods:</strong> We performed CBCT on patients with odontomas (19 patients;10 women, 9 men;average age, 12.6 [range, 6 - 34] years) according to the pathology type at a university hospital between April 2008 and February 2017. The locations of the lesions were noted, and their sizes were measured on CBCT images. Buccolingual, mesiodistal, and vertical diameters of the lesions were recorded on the same slice with the greatest diameters on axial, coronal, and sagittal CBCT images. <strong>Results: </strong>Altogether, 9 (47.4%) and 10 (52.6%) odontomas were located in the mandible and maxilla, respectively. There was no significant difference in the mesiodistal and vertical diameters on the CBCT image between the mandibular and maxillary groups when the odontoma size was compared with location (p < 0.05). However, the average diameters in only the buccolingual diameter were significantly greater in the maxilla. There were no significant differences between the two groups according to sex, age, or histological type. <strong>Conclusions: </strong>These data suggest that the sizes of odontomas in the maxilla are affected by bone expansion in the buccolingual direction, but they may be invariable in most settings. Three-dimensional assessment across the age groups suggests a lack of variation in size.
文摘Objective The aim of the study was to evaluate the coverage of the prostate when prostatic implanted fiducial markers are used to verify setup of the patients in comparison to the pelvic bones while using conebeam computed tomography(CBCT). Methods Seventeen patients with prostate cancer were included. For each patient, daily online CBCT was done. CT planning was matched with CBCT with the help of fiducial markers(3–5 markers) and another matching with done the help of pelvic bony landmarks. Registration of clinical target volume(CTV) 1 including prostate plus seminal vesicles and CTV2 including prostate only was done and were used to confirm the target volume during the process of matching. Delineation of the rectum on every CBCT was done. Two automatic margin representing planning target volume(PTV) were created. PTV1 was generated by adding 1 cm in all directions(PTV1a) and 0.7 cm in the posterior direction(PTV1b). PTV2 was generated by adding 0.5 cm in all directions(PTV2a) and 0.3 cm in the posterior direction(PTV2b). PTV1a was prescribed to receive 46 Gy in conventional fractionation with a boost dose of 30 Gy to PTV1b. The same dose was prescribed to PTV2a and PTV2b. Calculation of the percentage of intersection between CTV1and CTV2 created on CBCT with the original CTV scan was done. A comparison between the two CTVs(CTV1and CTV2) mean dose and the original delineated CTV was done. Then a comparison to the mean dose of the original CTV of PTV1a, PTV2a(CTV1a and CTV2a), and for PTV1b and PTV2b(CTV1b and CTV2b). Calculation of the mean rectal dose and also V60, V70 and V74 was done on the delineated rectum on every CBCT, and then a comparison to the planned original rectal dose. Results The created CTV1and CTV2 intersection percentage with the original CTV1and CTV2 significantly increased by 85%(range, 65%–95%, P < 0.05), when fiducial markers were used. The main difference of the received mean dose was significantly less in comparison to pelvic bone alignment(0.03% to 2% vs 0.03% to 11.6% for PTV1a, P < 0.006;0.01% to 1.8% vs 0.03% to 10.2% for PTV2a, P < 0.014;0.08 to 2.11 vs 0.04 to 11.29 for PTV1b, P < 0.015 and 0.01 to 1.79 vs 0.01 to 9.69 for PTV2b, P < 0.004). With the use of less PTV margins, significant decrease of the rectal mean dose, V60, V70 and V74 by P < 0.004, P < 0.004, P < 0.0005 and P < 0.009, respectively. Reduction of the CTV1a and CTV1b mean dose by 1.13% and 0.28% in comparison to the initial CTV1a and CTV2a.Conclusion A significant improvement of prostatic cancer patients alignment when fiducial markers are used, with more homogenous dose distribution, and with significant decrease in PTV margins. The delivered rectal dose is significantly less allowing prostate dose escalation.
文摘AIM:To evaluate whether intra-procedural conebeam computed tomography(CBCT)performed during modified balloon-occluded retrograde transvenous obliteration(mB RTO)can accurately determine technical success of complete variceal obliteration.METHODS:From June 2012 to December 2014,15 patients who received CBCT during m BRTO for treatment of portal hypertensive gastric variceal bleeding were retrospectively evaluated.Three-dimensional(3D)CBCT images were performed and evaluated prior to the end of the procedure,and these were further analyzed and compared to the pre-procedure contrast-enhanced computed tomography to determine the technical success of m BRTO including:Complete occlusion/obliteration of:(1)gastrorenal shunt(GRS);(2)gastric varices;and(3)afferent feeding veins.Post-mB RTO contrast-enhanced CT was used to confirm the accuracy and diagnostic value of CBCT within 2-3 d.RESULTS:Intra-procedural 3D-CBCT images were 100% accurate in determining the technical success of m BRTO in all 15 cases.CBCT demonstrated complete occlusion/obliteration of GRS,gastric varices,collaterals and afferent feeding veins during m BRTO,which was confirmed with post-m BRTO CT.Two patients showed incomplete obliteration of gastric varices and feeding veins on CBCT,which therefore required additional gelfoam injections to complete the procedure.No patient required additional procedures or other interventions during their follow-up period(684 ± 279 d).CONCLUSION:CBCT during mB RTO appears to accurately and immediately determine the technical success of mB RTO.This may improve the technical and clinical success/outcome of m BRTO and reduce additional procedure time in the future.
文摘Background: In dental-maxillofacial imaging, 3D sectional imaging progressively replaces conventional 2D imaging in developed countries. They are based specially on Computed tomography (CT-Scan), with the Dentascan application and cone beam computed tomography (CBCT). In developing countries those technics are newly introduced. Aim: This study aimed at studying the knowledge and practices of dentist and oral and maxillofacial surgeons on sectional imaging such as Dentascan and Cone Beam Computed Tomography (CBCT). Materials and Methods: We conducted an anonymous survey among dentists and oral maxillofacial surgeons in Togo over one month. Results: The response rate was 78.79% (27/33). They were mainly male sex (sex ratio of 2.25 men for one woman). They were aged between 27 and 71 years old with an average of 49.69 years old. The majority (61.54%) had a professional experience over 20 years. The majority of respondents (65.38%) believed their level of knowledge about dental x-Ray was poor. Half of them (50%) confirmed that they had never asked for a Dentascan, and 15.38% asked from time to time for it and only two (7.69%) asked often for this test. 96.15% confirm they have no knowledge of the Dentascan. Regarding the CBCT, 84.62% didn’t ask for it because this technique did not exist in Togo before. 69.20% of respondents confessed to be interested in continuing training on sectional imaging. Conclusion: This study shows that sectional imaging is very little used by oral and dental practitioners in Togo because of the ignorance of the new techniques and the absence of the CBCT. It is therefore necessary to promote the teaching of the new technique of sectional imaging in the training syllabus of oral and dental specialists and to initiate continuing medical training.
文摘Background: The vast percentage of the alveolar bone resorption process happens within the first 12 to 24 weeks post extraction;however, this phenomenon is chronic, and the alveolar ridge continues to resorb. In order to prevent this reduction or at least recompense the loss of bone dimensions, the alveolar ridge preservation (ARP) technique was developed. Objectives: This research studied the vertical and horizontal bone dimensional changes as a result of non-molar teeth extraction alone against extraction with alveolar ridge preservation utilizing composite (bioceramics/collagen) graft by cone-beam computed tomography radiographies analyses. Material and Methods: This research was a randomized split-mouth controlled trial. 12 patients need extraction of the maxillary non-molar teeth were enrolled and allocated into 2 groups. 12 sockets after atraumatic extraction were filled with a composite graft in the role of the test group, 12 sockets left to unassisted healing after atraumatic extraction without any graft materials in the role of the control group. Two CBCT radiographs were taken at baseline and at 4 months after extraction for comparison. Both vertical and horizontal resorptions of the alveolar ridge were analyzed between test and control group by CBCT radiographs. Results: 4 months after extraction, there was a mean of vertical alveolar bone resorption compared with the baseline (0.56 ± 0.15 mm) in the test group and (1.47 ± 0.30 mm) in the control group. Whereas it was a mean of horizontal alveolar bone resorption compared with the baseline (0.90 ± 0.16 mm) in the test group and (2.26 ± 0.30 mm) in the control group. Therefore, there was a significant difference between the two groups. Conclusions: Within the limitations of this research, we demonstrated that the osteogen-plug technique significantly decreased the reduction of the bone dimensional in comparison to the tooth extraction alone, and showed that the dimensional change of the alveolar ridge after tooth extraction was minimized by using an osteogen-plug.
文摘Objective The aim of this study was to investigate tumor volume changes with kilovoltage cone-beam computed tomography(k V-CBCT) and their dosimetric consequences for non-operative lung cancer during intensity-modulated radiotherapy(IMRT) or fractionated stereotactic radiotherapy.Methods Eighteen patients with non-operative lung cancer who received IMRT consisting of 1.8–2.2 Gy/fraction and five fractions per week or stereotactic radiotherapy with 5–8 Gy/fraction and three fractions a week were studied. k V-CBCT was performed once per week during IMRT and at every fraction during stereotactic radiotherapy. The gross tumor volume(GTV) was contoured on the k V-CBCT images,and adaptive treatment plans were created using merged k V-CBCT and primary planning computed tomography image sets. Tumor volume changes and dosimetric parameters,including the minimum dose to 95%(D95) or 1%(D1) of the planning target volume(PTV),mean lung dose(MLD),and volume of lung tissue that received more than 5(V5),10(V10),20(V20),and 30(V30) Gy were retrospectively analyzed.Results The average maximum change in GTV observed during IMRT or fractionated stereotactic radiotherapy was –25.85%(range,–13.09% ––56.76%). The D95 and D1 of PTV for the adaptive treatment plans in all patients were not significantly different from those for the initial or former adaptive treatment plans. In patients with tumor volume changes of >20% in the third or fourth week of treatment during IMRT,adaptive treatment plans offered clinically meaningful decreases in MLD and V5,V10,V20,and V30; however,in patients with tumor volume changes of < 20% in the third or fourth week of treatment as well as in patients with stereotactic radiotherapy,there were no significant or clinically meaningful decreases in the dosimetric parameters.Conclusion Adaptive treatment planning for decreasing tumor volume during IMRT may be beneficial for patients who experience tumor volume changes of >20% in the third or fourth week of treatment.
基金This work was supported in part by grants from the US National Institutes of Health,Nos.R01 EB020366 and R01 EB027898the Cancer Prevention and Research Institute of Texas,Nos.RP130109 and RP160661from the University of Texas Southwestern Medical Center(Radiation Oncology Seed Grant).
文摘4-Dimensional cone-beam computed tomography(4D-CBCT)offers several key advantages over conventional 3DCBCT in moving target localization/delineation,structure de-blurring,target motion tracking,treatment dose accumulation and adaptive radiation therapy.However,the use of the 4D-CBCT in current radiation therapy practices has been limited,mostly due to its sub-optimal image quality from limited angular sampling of conebeam projections.In this study,we summarized the recent developments of 4D-CBCT reconstruction techniques for image quality improvement,and introduced our developments of a new 4D-CBCT reconstruction technique which features simultaneous motion estimation and image reconstruction(SMEIR).Based on the original SMEIR scheme,biomechanical modeling-guided SMEIR(SMEIR-Bio)was introduced to further improve the reconstruction accuracy of fine details in lung 4D-CBCTs.To improve the efficiency of reconstruction,we recently developed a U-net-based deformation-vector-field(DVF)optimization technique to leverage a population-based deep learning scheme to improve the accuracy of intra-lung DVFs(SMEIR-Unet),without explicit biomechanical modeling.Details of each of the SMEIR,SMEIR-Bio and SMEIR-Unet techniques were included in this study,along with the corresponding results comparing the reconstruction accuracy in terms of CBCT images and the DVFs.We also discussed the application prospects of the SMEIR-type techniques in image-guided radiation therapy and adaptive radiation therapy,and presented potential schemes on future developments to achieve faster and more accurate 4D-CBCT imaging.
基金supported by Scientific Research Foundation for Returned Scholars of the Ministry of Education of China (No. 245027)the Science and Technology Planning Program of Guangdong Province (No. 2006B35801004)
文摘Aim The purpose of this study was to conduct quantitative research on bone height and bone mineral density of palatal implant sites for implantation, and to provide reference sites for safe and stable palatal implants. Methodology Three-dimensional reformatting images were reconstructed by cone beam computed tomography (CBCT) in 34 patients, aged 18 to 35 years, using EZ Implant software. Bone height was measured at 20 sites of interest on the palate. Bone mineral density was measured at the 10 sites with the highest implantation rate, classified using K-mean cluster analysis based on bone height and bone mineral density. Results According to the cluster analysis, 10 sites were classified into three clusters. Significant differences in bone height and bone mineral density were detected between these three clusters (P〈0.05). The greatest bone height was obtained in cluster 2, followed by cluster 1 and cluster 3. The highest bone mineral density was found in cluster 3, followed by cluster 1 and cluster 2. Conclusion CBCT plays an important role in pre-surgical treatment planning. CBCT is helpful in identifying safe and stable implantation sites for palatal anchorage.
文摘Cone beam computed tomography(CBCT) has often been used to determine the quality of craniofacial bone structures through the determination of mineral density, which is based on gray scales of the images obtained. However, there is no consensus regarding the accuracy of the determination of the gray scales in these exams. This study aims to provide a literature review concerning the reliability of CBCT to determine bone mineral density. The gray values obtained with CBCT show a linear relationship with the attenuation coefficients of the materials, Hounsfield Units values obtained with medical computed tomography, and density values from dual energy X-ray absorciometry. However, errors are expected when CBCT images are used to define the quality of the scanned structures be-cause these images show inconsistencies and arbitrari-ness in the gray values, particularly when related to abrupt change in the density of the object, X-ray beam hardening effect, scattered radiation, projection data discontinuity-related effect, differences between CBCTdevices, changes in the volume of the field of view(FOV), and changes in the relationships of size and position between the FOV and the object evaluated. A few methods of mathematical correction of the gray scales in CBCT have been proposed; however, they do not generate consistent values that are independent of the devices and their configurations or of the scanned objects. Thus, CBCT should not be considered the ex-amination of choice for the determination of bone and soft tissue mineral density at the current stage, par-ticularly when values obtained are to be compared to predetermined standard values. Comparisons between symmetrically positioned structures inside the FOV and in relation to the exomass of the object, as it occurs with the right and left sides of the skull, seem to be viable because the effects on the gray scale in the re-gions of interest are the same.
文摘To provide an anatomical basis for clinical implant esthetics,we evaluated the morphology of the nasopalatine canal(NPC) and analyzed labial and interproximal bone anatomy at the maxillary anterior region.We sought to investigate the effect of maxillary protrusion and tooth labiolingual inclination on labial bone anatomy in Chinese adults.Three dimensional(3D) images were reconstructed using cone-beam computed tomography(CBCT) images from 80 Chinese subjects and by SimPlant 11.04.The dimensions of the NPC,the thickness and profile of the labial bone,the width and height of the interproximal bone,angle sella-nasion-subspinale(SNA) and angle upper central incisor-nasion,subspinale(U1-NA) were measured.The incisive foramen of the NPC was markedly wider than its nasal foramen.The dimension of its labial bone wall demonstrated an increasing width from the crestal to apical measurements.The labial bone at the maxillary anterior region was rather thin,especially at 3 mm below the cemento-enamel junction(CEJ) and the mid-root level;the profile of the labial bone was more curved at the central incisor,and the interproximal bone became wider and shorter posteriorly.There were significant relationships between maxillary protrusion and labial bone profile,tooth labiolingual inclination and labial bone thickness(P 〈 0.02).To achieve optimal esthetic outcome of implant,bone augmentation is necessary at the maxillary anterior region.For immediate or early placement at the maxillary anterior region,the implant should be located palatally to reduce labial bone resorption and marginal recession;its apex should be angulated palatally to avoid labial perforation at the apical region.To protect the NPC,implants at the central incisor region should be placed away from NPC.
基金Supported by the Innovative Talents Promotion Program-Youth Science and Technology Star Project,No. 2019KJXX-086Shaanxi Provincial Natural Science Basic Research Foundation of China,No. 2019JM-376National Nature Science Foundation of China,No. 81970929
文摘BACKGROUND Fused teeth usually involve several complications,such as the development of caries in the groove between fused crowns,tooth impaction,diastemas,aesthetic and periodontal problems,and pulpal pathosis,due to the complex anatomical structure of fused teeth.A thorough diagnosis is paramount to forming an accurate treatment plan and obtaining a favourable prognosis.With the advent of cone-beam computed tomography(CBCT),accurate 3-dimensional images of teeth and their surrounding dentoalveolar structures can now be readily obtained,and the technology can accurately provide a minimally invasive approach to acquire detailed diagnostic information.Therefore,we utilize CBCT data herein to generate a digital model for the infected region in a patient,and this model enables us to better plan the management of his case.CASE SUMMARY This report details the diagnosis and endodontic treatment of a rare case involving a fused maxillary second molar and two paramolars with apical periodontitis.The patient experienced pain upon biting and cold sensitivity in the area of the maxillary left molar.No caries or other defects were identified in these teeth,and a normal response to a pulp electric viability test was observed.With the aid of CBCT and digital model technology,we initially suspected that the infection originated from the isthmus between the maxillary second molar and two paramolars.Therefore,we only treated the isthmus by an endodontic approach and did not destroy the original tooth structure;furthermore,the vital pulp was retained,and good treatment outcomes were observed at the 24-month follow-up.CONCLUSION This finding may provide new insights and perspectives on the diagnosis and treatment of fused teeth.
文摘Nearly two decades since Cone Beam-Computed Tomography (CBCT) was introduced in dentistry, this technology has been proven to be a useful asset in modern dental practice. The information gleaned from a CBCT scan influences treatment decisions and prognostication of challenging endodontic cases. The authors present six cases that utilized CBCT to diagnose vertical root fracture, to assess resorption, to guide the clinician in overcoming anatomical complexities, to hurdle diagnostic dilemmas and to perform pre-surgical evaluation. Initially, a thorough clinical assessment was performed;however, conventional periapical radiographs were not able to provide sufficient information to arrive at a definite diagnosis or a thorough treatment plan. CBCT was therefore deemed helpful for these cases. Clearly, there are advantages to using CBCT. With a better understanding of each case, the clinician can plan a definitive treatment plan and offer a clearer case prognosis to their patient.
文摘Facial imaging is used to study the facial shapeand its developmental changes over time.This isimportant to diagnose acquired malformations,to studynormal and abnormal growth and to differentiatebetween the results of treatment and normal growth,and to validate facial recognition.The two mainmethods to study and record facial imaging are bymeans of cephalometry and anthropometry[1].Cephalometrics is the scientific study of themeasurements of the
文摘Cone-beam computed tomography(CBCT) was developed and introduced specifically for dento-maxillofacial imaging. CBCT possesses a number of advantages over medical CT in clinical practice, such as lower effective radiation doses, lower costs, fewer space requirements,easier image acquisition, and interactive display modes such as mutiplanar reconstruction that are applicable to maxillofacial imaging. However, the disadvantages of CBCT include higher doses than two-dimensional imaging; the inability to accurately represent the internal structure of soft tissues and soft-tissue lesions; a limited correlation with Hounsfield Units for standardized quantification of bone density; and the presence of various types of image artifacts, mainly those produced by metal restorations. CBCT is now commonly used for a variety of purposes in oral implantology, dentomaxillofacial surgery, image-guided surgical procedures, endodontics, periodontics and orthodontics. CBCT applications provide obvious benefits in the assessment of dentomaxillofacial region, however; it should be used only in correct indications considering the necessity and the potential hazards of the examination.