Bioinspired Passive Tactile Sensors Enabled by Reversible Polarization of Conjugated Polymers

Tactile perception plays a vital role for the human body and is also highly desired for smart prosthesis and advanced robots.Compared to active sensing devices,passive piezoelectric and triboelectric tactile sensors consume less power,but lack the capability to resolve static stimuli.Here,we address this issue by utilizing the unique polarization chemistry of conjugated polymers for the first time and propose a new type of bioinspired,passive,and bio-friendly tactile sensors for resolving both static and dynamic stimuli.Specifically,to emulate the polarization process of natural sensory cells,conjugated polymers(including poly(3,4-ethylenedioxythiophen e):poly(styrenesulfonate),polyaniline,or polypyrrole)are controllably polarized into two opposite states to create artificial potential differences.The controllable and reversible polarization process of the conjugated polymers is fully in situ characterized.Then,a micro-structured ionic electrolyte is employed to imitate the natural ion channels and to encode external touch stimulations into the variation in potential difference outputs.Compared with the currently existing tactile sensing devices,the developed tactile sensors feature distinct characteristics including fully organic composition,high sensitivity(up to 773 mV N^(−1)),ultralow power consumption(nW),as well as superior bio-friendliness.As demonstrations,both single point tactile perception(surface texture perception and material property perception)and two-dimensional tactile recognitions(shape or profile perception)with high accuracy are successfully realized using self-defined machine learning algorithms.This tactile sensing concept innovation based on the polarization chemistry of conjugated polymers opens up a new path to create robotic tactile sensors and prosthetic electronic skins.

A Stable Open-Shell Conjugated Diradical Polymer with Ultra-High Photothermal Conversion Efficiency for NIR-Ⅱ Photo-Immunotherapy of Metastatic Tumor

Massive efforts have been concentrated on the advance of eminent near-infrared(NIR) photothermal materials(PTMs) in the NIR-Ⅱ window(1000–1700 nm), especially organic PTMs because of their intrinsic biological safety compared with inorganic PTMs. However, so far, only a few NIR-Ⅱresponsive organic PTMs was explored, and their photothermal conversion efficiencies(PCEs) still remain relatively low. Herein, donor–acceptor conjugated diradical polymers with open-shell characteristics are explored for synergistically photothermal immunotherapy of metastatic tumors in the NIR-Ⅱ window. By employing side-chain regulation, the conjugated diradical polymer TTB-2 with obvious NIR-Ⅱ absorption was developed, and its nanoparticles realize a record-breaking PCE of 87.7% upon NIR-Ⅱ light illustration. In vitro and in vivo experiments demonstrate that TTB-2 nanoparticles show good tumor photoablation with navigation of photoacoustic imaging in the NIR-Ⅱ window, without any side-effect. Moreover, by combining with PD-1 antibody,the pulmonary metastasis of breast cancer is high-effectively prevented by the efficient photo-immunity effect. Thus, this study explores superior PTMs for cancer metastasis theranostics in the NIR-Ⅱ window, offering a new horizon in developing radical-characteristic NIR-Ⅱ photothermal materials.

Recent advances and innovations in the design and fabrication of wearable flexible biosensors and human health monitoring systems based on conjugated polymers

Wearable biosensors have received great interest as patient-friendly diagnostic technologies because of their high flexibility and conformability.The growing research and utilization of novel materials in designing wearable biosensors have accelerated the development of point-of-care sensing platforms and implantable biomedical devices in human health care.Among numerous potential materials,conjugated polymers(CPs)are emerging as ideal choices for constructing high-performance wearable biosensors because of their outstanding conductive and mechanical properties.Recently,CPs have been extensively incorporated into various wearable biosensors to monitor a range of target biomolecules.However,fabricating highly reliable CP-based wearable biosensors for practical applications remains a significant challenge,necessitating novel developmental strategies for enhancing the viability of such biosensors.Accordingly,this review aims to provide consolidated scientific evidence by summarizing and evaluating recent studies focused on designing and fabricating CP-based wearable biosensors,thereby facilitating future research.Emphasizing the superior properties and benefits of CPs,this review aims to clarify their potential applicability within this field.Furthermore,the fundamentals and main components of CP-based wearable biosensors and their sensing mechanisms are discussed in detail.The recent advancements in CP nanostructures and hybridizations for improved sensing performance,along with recent innovations in next-generation wearable biosensors are highlighted.CPbased wearable biosensors have been—and will continue to be—an ideal platform for developing effective and user-friendly diagnostic technologies for human health monitoring.

Effect of electron-electron interaction on polarization process of exciton and biexciton in conjugated polymer

By using one-dimensional tight-binding model modified to include electron-electric field interaction and electron-electron interaction,we theoretically explore the polarization process of exciton and biexciton in cis-polyacetylene.The dynamical simulation is performed by adopting the non-adiabatic evolution approach.The results show that under the effect of moderate electric field,when the strength of electron-electron interaction is weak,the singlet exciton is stable but its polarization presents obvious oscillation.With the enhancement of interaction,it is dissociated into polaron pairs,the spin-flip of which can be observed through modulating the interaction strength.For the triplet exciton,the strong electron-electron interaction restrains its normal polarization,but it is still stable.In the case of biexciton,the strong electron-electron interaction not only dissociate it,but also flip its charge distribution.The yield of the possible states formed after the dissociation of exciton and biexciton is also calculated.

Conjugated microporous polymers-scaffolded enzyme cascade systems with enhanced catalytic activity

Enhancing catalytic activity of multi-enzyme in vitro through substrate channeling effect is promis-ing yet challenging.Herein,conjugated microporous polymers(CMPs)-scaffolded integrated en-zyme cascade systems(I-ECSs)are constructed through co-entrapping glucose oxidase(GOx)and horseradish peroxidase(HRP),in which hydrogen peroxide(H_(2)O_(2)) is the intermediate product.The interplay of low-resistance mass transfer pathway and appropriate pore wall-H_(2)O_(2) interactions facilitates the directed transfer of H_(2)O_(2),resulting in 2.4-fold and 5.0-fold elevation in catalytic activ-ity compared to free ECSs and separated ECSs,respectively.The substrate channeling effect could be regulated by altering the mass ratio of GOx to HRP.Besides,I-ECSs demonstrate excellent stabili-ties in harsh environments and multiple recycling.

Co and postseismic fault slip models of the 2022 M_(W)6.7 Menyuan earthquake reveal conjugated faulting tectonics at the central section of the Lenglongling fault

The 2022 M_(W)6.7 Menyuan earthquake ruptured the western end of the Tianzhu seismic gap,providing an opportunity to study the regional seismogenic characteristics and seismic hazards.Here we use interferometric synthetic aperture radar(InSAR)and seismic data to study the mainshock rupture,early afterslip and the second largest aftershock of the 2022 Menyuan earthquake sequences.Our modeling results show that the mainshock ruptured the Lenglongling fault and the Tuolaishan fault with a maximum slip of~3 m.Rapid postseismic transient deformation occurred at the center of the Lenglongling fault.Our afterslip modeling reveals that the majority of afterslip occurred in the deeper part of the Lenglongling fault.A high-angle conjugated faulting event is found at the middle section of the Lenglongling fault.We use the stress inversion to investigate the possible triggering mechanism of the conjugated rupture event.The results indicate the maximum principal stress direction is in~222°,forming a~22°angle between the conjugated fault of second largest aftershock and the mainshock.The calculated normal stress changes indicate the region is within a pull-apart stress field,which favors such a conjugated rupturing event.Our study will help understand the rupture behavior of such kind of conjugated fault in other regions.

When insulating polymers meet conjugated polymers:the noncovalent bonding does matter

Insulating polymers are characterized by a predominantlyσ-covalent structure,which localize electrons in the atoms and exhibit dielectricity.Insulating polymers typically adopt a more linear and extended conformation,as the repeating units are connected by single covalent bonds,resulting in a relatively straight and extended chain structure.For most insulating polymers,the contour length(L_(c))is significantly larger than their persistence length(Lp)due to the rotation of C−C single bonds(Fig.1(a)).Consequently,this leads to a flexible,random-coil chain conformation.This structural feature contributes to the great mechanical durability and resistance to crack initiation during stretching or bending processes.In contrast,conjugated polymers possess aπ-conjugated molecular structure,allowing electron mobility along the main chain,called delocalization,which imparts semiconducting properties[1,2].The presence of rigid,alternating single and multiple bonds results in comparable Lc and Lp,thereby yielding a stiff or semi-flexible conformation(Fig.1(b))[3,4].As a consequence,most conjugated polymers are prone to fracture under low strain levels(<10%)[5−7].

Prediction of Shear Bond Strength of Asphalt Concrete Pavement Using Machine Learning Models and Grid Search Optimization Technique

Determination of Shear Bond strength(SBS)at interlayer of double-layer asphalt concrete is crucial in flexible pavement structures.The study used three Machine Learning(ML)models,including K-Nearest Neighbors(KNN),Extra Trees(ET),and Light Gradient Boosting Machine(LGBM),to predict SBS based on easily determinable input parameters.Also,the Grid Search technique was employed for hyper-parameter tuning of the ML models,and cross-validation and learning curve analysis were used for training the models.The models were built on a database of 240 experimental results and three input variables:temperature,normal pressure,and tack coat rate.Model validation was performed using three statistical criteria:the coefficient of determination(R2),the Root Mean Square Error(RMSE),and the mean absolute error(MAE).Additionally,SHAP analysis was also used to validate the importance of the input variables in the prediction of the SBS.Results show that these models accurately predict SBS,with LGBM providing outstanding performance.SHAP(Shapley Additive explanation)analysis for LGBM indicates that temperature is the most influential factor on SBS.Consequently,the proposed ML models can quickly and accurately predict SBS between two layers of asphalt concrete,serving practical applications in flexible pavement structure design.

Intraparticle Charge Delocalization through Conjugated Metal-Ligand Interfacial Bonds:Effects of Metal d Electrons

Intraparticle charge delocalization occurs when metal nanoparticles are functionalized with organic capping ligands through conjugated rnetal-ligand interfacial bonds. In this study, metal nanoparticles of 5d metals （Ir, Pt, and Au） and 4d metals （Ru, Rh, and Pd） were prepared and capped with ethynylphenylacetylene and the impacts of the number of metal d electrons on the nanoparticle optoelectronic properties were examined. Both FTIR and photoluminescence measurements indicate that intraparticle charge delocalization was en- hanced with the increase of the number of d electrons in the same period with palladium being an exception.

Ultrathin organic polymer with p-πconjugated structure for simultaneous photocatalytic disulfide bond generation and CO_(2)reduction

Combining photocatalytic organic reactions with CO_(2)reduction is an efficient solar energy utilization mode,but it is still limited by the organic species that can be matched and the low conversion.Herein,ultrathin organic polymer with p-πconjugated structure(TPP)was rationally designed and prepared,and showed a high yield of CO(15.2 mmol g^(-1))and conversion of SAS coupled products(100%),far exceeding the organic polymer with P=O structure.The enhanced photoredox activity of TPP is ascribed to the orbital interaction between the p-orbital on phosphorus and theπ-orbitals of aromatic,which can accelerate the photoinduced charge carrier separation and improve the CO_(2)adsorption capacity.TPP can also be used for the dehydrocoupling of various benzyl mercaptans to the corresponding SAS bond products.This work provides a new concept for the efficient synthesis of disulfide bonds combined with CO_(2)reduction in a photoreaction system.

Synthesis of CuAPTPP-TDI-TiO2 Conjugated Microspheres and its Photocatalytic Activity

The metal complex 5-（4-aminophenyl）-10,15,20-triphenylporphyrin copper （CuAPTPP） was covalently linked on the surface of TiO2 microspheres by using toluene disocyanate （TDI） as a bridging bond unit. The hydroxyl group （-OH） of TiO2 microspheres surface and the amino group （-NH2） of CuAPTPP reacted respectively with the active -NCO groups of TDI to form a surface conjugated microsphere CuAPTPP-TDI-TiO2 that was confirmed by FT-IR spectra. The CuAPTPP-TDI-TiO2 microspheres were characterized with UV-visible, elemental analysis, XRD, SEM, and UV-Vis diffuse reflectance spectra. The effect of amounts of linked TDI on the performance of photocatalytic microspheres was discussed, and the optimal molar ratio of TDI：TiO2 was established. The photocatalytic activity of CuAPTPP- TDI-TiO2 was evaluated using the photocatalytic degradation of methylene blue （MB） under visible-light irradiation. The results showed that, TDI, as a bond unit, was used to form a steady chemical brigdging bond linking CuAPTPP and the surface of TiO2 microspheres, and the prepared catalyst exhibited higher photocatalytic activity under visible-light irradiation for MB degradation. The degradation rate of 20 mg/L MB could reach 98.7% under Xe- lamp （150 W） irradiation in 120 rain. The degradation of MB followed the first-order reaction model under visible light irradiation, and the rate constant of 5.1× 10^-2 min-1 and the half- life of 11.3 min were achieved. And the new photocatalyst can be recycled for 4 times, remaining 90.0% MB degradation rate.

Folate-conjugated Fe_3O_4 nanoparticles for in vivo tumor labeling

Highly biocompatible superparamagnetic Fe3O4 nanoparticles were synthesized by amide of folic acid （FA） ligands and the NH2-group onto the surface of Fe3O4 nanoparticles. The as-synthesized folate-conjugated Fe3O4 nanoparticles were characterized by X-ray diffraction diffractometer, transmission electron microscope, FT-IR spectrometer, vibrating sample magnetometer, and dynamic light scattering instrument. The in vivo labeling effect of folate-conjugated Fe3O4 nanoparticles on the hepatoma cells was investigated in tumor-bearing rat. The results demonstrate that the as-prepared nanoparticles have cubic structure of Fe3O4 with a particle size of about 8 nm and hydrated diameter of 25.7 nm at a saturation magnetization of 51 A·m2/kg. These nanoparticles possess good physiological stability, low cytotoxicity on human skin fibroblasts and negligible effect on Wistar rats at the concentration as high as 3 mg/kg body mass. The folate-conjugated Fe3O4 nanoparticles could be effectively mediated into the human hepatoma Bel 7402 cells through the binding of folate and folic acid receptor, enhancing the signal contrast of tumor tissue and surrounding normal tissue in MRI imaging. It is in favor of the tumor cells labeling, tracing, magnetic resonance imaging （MRI） target detection and magnetic hyperthermia.

Preparation of Conjugated Linoleic Acid of High Purity and Its Apparent Kinetic Characteristics During Formation

Conjugated linoleic acid (CLA) is a fatty acid with physiological activities and potential application prospect. This paper focuses on the method of synthesis of conjugated linoleic acid of high purity and the process line and conditions for its purification that can be used in large scale production. CLA of more than 95% purity was prepared by means of urea adduct purification and conjugation using safflower oil as material. The total recovery of the product adds up to more than 48%. The reactive kinetics about linoleic acid from sunflower oil converted into CLA was investigated, and its apparent kinetic model was also established, which can be used as a base for industrial designs.

Synthesis of nucleoside-peptide conjugate with disulfide bond as linker at C-5 of uridine

In order to prepare pyrimidine nucleoside-peptide conjugate concisely, we developed a one-pot synthetic strategy. Started from uridine, 5-S-acetyl-thiomethyl-2＇,3 ＇-di-O-isopropylidene-uridine （4） was synthesized as the key intermediate in four steps. Under acidic condition, compound 4 was deprotected and reacted with PySS-R （8, 12, 15, Py = 2-pyridyl, R = amino acid or peptide） in one pot to form uridine conjugates （9, 13, 2） with disulfide bond as linker.

Relationship between ATPase activity and conjugated polyamines in mito-chondrial membrane from wheat seedling roots under osmotic stress

The effects of osmotic stress on the ATPase activity, the contents of —SH group and conjugated polyamines in mitochondrial membrane from wheat seedling [Triticum aestivum L. cv. Yumai No.18(drought-tolerant) and cv. Yumai No.9(drought-sensitive)] roots were investigated. The results showed that ATPase activity and —SH group content decreased with polyethylene glycol(PEG) 6000(-0.55 MPa) treatment for 7 d, in concert with the decrease of the ratio of noncovalently conjugated spermidine(NCC-Spd)/noncovalently conjugated putrescine(NCC-Put) and increase of the covalently conjugated putrescine(CC-Put). Osmotic stress injury to Yangmai No.9 seedlings was alleviated greatly with 1 mmol/L exogenous spermidine(Spd), in concert with marked increases of the ratio of NCC-Spd/NCC-Put, —SH group contents and ATPase activity in mitochondrial membrane. Under osmotic stress, the concomitant treatment of Yumai No.18 seedlings with methylglyoxyl bis(guanylhydrazone) (MGBG), an inhibitor of S-adenosyl methionine decarboxylase(SAMDC), and phenanthrolin (o-Phen), an inhibitor of transglutaminase(TGase), caused a significant decrease of the ratio of NCC-Spd / NCC-Put, CC-Put contents, respectively, in concert with the marked decreases of ATPase activity, —SH group content and its tolerance to osmotic stress. All the results above suggested that osmotic stress tolerance of wheat seedlings was associated with the ATPase activity, the contents of —SH group, NCC-Spd and CC-Put in mitochondrial membrane.

The preparation and characterization of folate-conjugated human serum albumin magnetic cisplatin nanoparticles

Objective： Nanoparticles are becoming an important method of targeted drug delivery. To evaluate the importance of folate-conjugated human serum albumin （HSA） magnetic nanoparticles （Folate-CDDP/HSA MNP）, we prepared drug-loaded Folate-CDDP/HSA MNPs and characterized their features. Methods： First, folate was conjugated with HSA under the effect of a condensing agent, and the conjugating rate was evaluated by a colorimetric method using 2, 4, 6 - trinitrobenzene sulfonic acid. Second, under N., gas, Fe：~O1 magnetic nanomaterials were prepared and characterized by using transmission electron microscopy （TEM）, SEM-EDS and X-ray diffraction （XRD）. Finally, Folate-CDDP/HSA MNP was prepared by using a solvent evaporation technique. TEM was used to observe particle morphology. The particle size and distribution of the prepared complexes were determined by a Laser particle size analyzer. Drug loading volume and drug release were investigated by a high performance liquid chromatography method （HPLC） in vitro. Results： We successfully prepared folate-conjugated HSA and its conjugating rate was 27.26 μg/mg. Under TEM, Fe2O4 magnetic nanoparticles were highly electron density and had an even size distribution in the range of 10-20 nm. It was confirmed by SEM-EDS and XRD that Fe304 magnetic nanoparticles had been successfully prepared. Under TEM, drug-loaded magnetic nanoparticles were observed, which had a round shape, similar uniform size and smooth surface. Their average size was 79 nm which was determined by laser scattering, and they exhibited magnetic responsiveness. Encapsulation efficiency was 89.75% and effective drug loading was calculated to be 15.25%. The release results in vitro showed that the half release time （ta/2） of cisplatin in cisplatin Solution and Folate-CDDP/HSA MNP was 65 min and 24 h respectively, which indicated that microspheres had an obvious effect of sustained-release. Conclusion： Folate-CDDP/HSA MNPs were prepared successfully. The preparation process and related characteristics data provided a foundation for further study, including the mechanism of the nanoparticles distribution in vivo and their intake by tumor cells.

High-Performance Na-Ion Storage of S-Doped Porous Carbon Derived from Conjugated Microporous Polymers

Na-ion batteries(NIBs)have attracted considerable attention in recent years owing to the high abundance and low cost of Na.It is well known that S doping can improve the electrochemical performance of carbon materials for NIBs.However,the current methods for S doping in carbons normally involve toxic precursors or rigorous conditions.In this work,we report a creative and facile strategy for preparing S-doped porous carbons(SCs)via the pyrolysis of conjugated microporous polymers(CMPs).Briefly,thiophene-based CMPs served as the precursors and doping sources simultaneously.Simple direct carbonization of CMPs produced S-doped carbon materials with highly porous structures.When used as an anode for NIBs,the SCs exhibited a high reversible capacity of 440 mAh g?1 at 50 mA g?1 after 100 cycles,superior rate capability,and excellent cycling stability(297 mAh g?1 after 1000 cycles at 500 mA g?1),outperforming most S-doped carbon materials reported thus far.The excellent performance of the SCs is attributed to the expanded lattice distance after S doping.Furthermore,we employed ex situ X-ray photoelectron spectroscopy to investigate the electrochemical reaction mechanism of the SCs during sodiation-desodiation,which can highlight the role of doped S for Na-ion storage.

Effect of Technetium-99 Conjugated with Methylene Diphosphonate on IgM-RF,IgG-RF and IgA-RF

To explore the effect of technetium-99 conjugated with methylene diphosphonate ( 99 Tc-MDP) on IgM-RF, IgG-RF and IgA-RF (RFs), 47 cases were selected for study, including 33 patients with rheumatoid arthritis (RA) and 15 patients with joint pain/arthritis. After 99 Tc-MDP for drips model being given to the patients by intravenous drip 0.2 g daily for 5 days, the injection A and B models of 99 Tc-MDP were used to the patients by intravenous injection one set daily for 10 days, that was one course of treatment. The next course started after 10 days. Each case used it from 2 to 4 courses of treatment. The RFs in serum were determined by the method of enzyme-linked immunoabsorption assay (ELISA) before and after 2 and 4 courses of treatment. In the patients with RA, the concentrations of IgM-RF were 296.2±108.4 IU/ml, 189.5±92.3 IU/ml and 107.8±72.5 IU/ml; the concentrations of IgG-RF were 325.6±126.2 IU/ml, 209.7±98.2 IU/ml and 160.2±80.8 IU/ml; the concentrations of IgA-RF were 330.4±136.3 IU/ml, 210.7±89.2 IU/ml and 148.8±72.2 IU/ml before and after 2 and 4 courses of treatment, respectively. The concentrations of the above RFs were significantly lower after 2 and 4 courses than those before treatment ( P <0.05 and P <0.01). There was no significant difference in RFs concentrations in the patients with joint pain/arthritis before and after use of 99 Tc-MDP. In the patients with positive RFs before treatment, the RFs concentrations were decreased significantly after 2 and 4 courses of treatment ( P <0.05 and P <0.01). There was no obvious change of RFs concentrations in the patients with negative RFs after treatment of 99 Tc-MDP. It was concluded that 99 Tc-MDP could obviously reduce the abnormally high concentrations of RFs, but not influence the normal RFs, which indicated that 99 Tc-MDP has an important effect on controlling the activities of RA.

Preparation of Conjugated Linoleic Acid and Identification of Its Isomers

Conjugated linoleic acid (CLA) is a kind of fatty acid with physiological activities and potential application prospect. A synthesis method of conjugated linoleic acid and a purification technology were studied. CLA was prepared and purified by urea-complexation and conjugation using safflower oil as raw material. The purity of CLA and total recovery of the product was more than 95% and 48%, respectively. The main isomers produced in alkali-catalyzed conjugation were identified by gas chromatography (GC) linked to mass spectrometry (MS) and Fourier transform infrared spectroscopy (FTIR). The total amount of the two main isomers (9cis, 11trons-and 10trans, 12cis-CLA) determined by GC was more than 90% of the product.

Anti-tumor Activity of Biodegradable Polymer-paclitaxel Conjugated Micelle Against Mice U14 Cervical Cancers

Two kinds of paclitaxel（PTX） conjugate micelles,of which one contained 25%（mass fraction） PTX [M（PTX）] and the other contained 22.5%（mass fraction） of PTX and 1.4%（mass fraction） of folate（FA）[FA-M（PTX）],were prepared for cell apoptosis and anti-tumor activity evaluation on U14 cervical cancer mouse models in comparison with 0.9%（mass fraction） saline（control） and equivalent Taxol.Seven days after tail intravenous injection of the drugs,the mice were sacrificed to measure the tumor masses.The average tumor masses were 4.26,2.89,2.63,and 2.17 g for the control,Taxol,M（PTX） and FA-M（PTX） groups,respectively.The inhibition rates of tumor growth calculated for the three drug groups were 32%,38% and 49%,respectively.Flow cytometry（FC） analysis and terminal deoxynucleotidyl transferase（TdT）-mediated deoxyuridine triphosphate（dUTP） nick end labeling（TUNEL） assay were conducted on the cancer tissues.The cell apoptosis rates based on the FC data and the TUNEL data were 20%,31%,37%,42%,and 10%,22%,26%,34%,respectively,both showing statistically significant differences（P〈0.05） between three drug groups and the control group,and between the FA-M（PTX） group and the other two drug groups.In conclusion,the composite FA-M（PTX） micelles can be used for U14 cervical cancer treatment.