Hole cleaning evaluation and installation spacing optimization of cuttings bed remover in extended-reach drilling

In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the annulus.Once cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,and pipe stuck probably occur,which results in a lot of non-productive time and remedial operations.Cuttings bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring effects.This paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning effect.Firstly,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation,and a new type of cuttings bed remover was designed.Next,an evaluation method of hole cleaning effect of remover was established.After that,the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid,rotational speed of drillpipe,rate of penetration,wellbore size,rheological property of drilling fluid,and remover eccentricity on the performance of cuttings bed remover were investigated.The results demonstrate that the new type of remover with streamline blade performs better than conventional removers.The efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe,flow rate of drilling fluid,remover eccentricity,and 6 rpm Fann dial reading for drilling fluid.While higher rate of penetration and large wellbore size result in worse hole cleaning.These findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.

Which Lymph Nodes Should Be Exactly Removed during Breast Cancer Surgery to Prevent Metastasis?

The aim of the study was to identify the relationship between molecular subtypes of breast cancer (BC) and the morphological characteristics of axillary lymph nodes (ALN) and metastatic risk in BC patients to clarify danger degree and justification of removal before metastases appear. Material and methods. Tumor molecular subtypes of 116 female BC patients aged 24 - 75 (53.9 ± 0.8) were determined by tumor tissue immunohistological examination (obtained by tru-cut biopsy), and the BC was classified as Luminal A, Luminal B/HER2−, Luminal B/HER2+, TNBC, and HER2+ subtypes. To interpret the results for the BC receptor status, immunohistochemical analysis was performed and interpreted according to the Allred scale. Lymph node size, shape, structure and conglomerates availability were recorded according to ultrasonography (USG) examination evaluated on “LOGIQ C5-Premium” (2012). Blood CA-15-3 levels were analyzed using a COBAS-e 411 automated analyzer. Statistical analysis of the obtained results was carried out using the SPSS-26 software package, and based on the t-Student-Bonferroni and H-Kruskal-Wallis criteria. The sensitivity and specificity of the indicators studied were determined using ROC statistical analysis. Results showed a significant association of some subtypes, as well as receptor expression, with tumor metastasis to ALN. Conclusion: 1) The HER2+ subtype is the most aggressive in terms of ALN metastasis. Although TNBC is the most aggressive subtype in general, it is characterized by fewer metastases to the ALN than the HER2+ subtype. 2) Metastatic ALNs can be distinguished based on their cortical structure before tumor tissue biopsy, which is economically profitable. These LNs can be removed without biopsy.

Synergy Study of Surfactants Common Used in Makeup Remover

In order to solve the problem of limited makeup removal ability of a single surfactant of Peg-20 glyceryl triisostearate in makeup remover,an efficient system was prepared which contained PEG-20 glyceryl triisostearate and a combination of Sorbeth-30 tetraoleate and Peg-5 glyceryl triisostearate.Leather test,skin colorimeter test and consumer self-evaluation were used to assess the makeup removal ability,rinsing performance and softness skin feel of the efficient makeup remover base.The results showed that a 7%combination of Sorbeth-30 tetraoleate and PEG-5 glyceryl triisostearate could significantly improve the comprehensive performance of single PEG-20 glyceryl triisostearate makeup remover system,furthermore,they performed best at the ratio of 6:1.We hope the findings can have guiding significance for the development of makeup remover products.

Removal of elemental mercury from coal combustion flue gas by sodium halides impregnated red mud

Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated with sodium halides(NaBr and NaI)are presented to capture elemental mercury(Hg^(0))from flue gas.The modified RM underwent comprehensive characterization,including analysis of its textural qualities,crystal structure,chemical composition,and thermal properties.The results indicate that the halide impregnation substantially impacts the surface area and pore size of the RM.Hg^(0) removal performance was evaluated on a fixed-bed reactor in simulated flue gas(consisting of N_(2),O_(2),CO_(2),NO and SO_(2),etc.)on a modified RM.At an optimal adsorption temperature of 160℃,NaI-modified sorbent(RMI5)offers a removal efficiency of 98%in a mixture of gas,including O_(2),NO and HCl.Furthermore,pseudo-second-order model fitting results demonstrate the chemisorption mechanism for the adsorption of Hg^(0) in kinetic investigations.

Difficulty removing a totally implantable venous access port:A case report

BACKGROUND This case report examines the challenges associated with removing a totally implantable venous access port(TIVAP)used for long-term chemotherapy in a patient with breast cancer.Prolonged use of TIVAPs can result in complications such as catheter kinking,thrombosis,and adhesions between the catheter and surrounding tissues,potentially complicating their removal.CASE SUMMARY A breast cancer patient with bone metastasis presented with difficulty aspirating blood from a TIVAP that had been placed in the right internal jugular vein for 3 years.Initial removal attempts at the Department of Venous Access Center were unsuccessful,likely due to adhesions,necessitating a subsequent successful catheter extraction in a hybrid operating room.Imaging revealed no abnor-malities,and the catheter was removed using a mosquito clamp to detach it from surrounding tissues.CONCLUSION This case highlights the challenges of removing TIVAPs inserted via the internal jugular vein,particularly when the catheter traverses the sternocleidomastoid muscle.Repeated neck movements might lead to significant adhesions around the catheter,complicating its removal.Careful consideration should be given during catheter placement to avoid muscle-related adhesions and facilitate smoother extraction in long-term use.

Mechanism to remove oxide inclusions from molten aluminum by solid fluxes refining method

A novel flux charging method and a crucible quenching method were employed to study the mechanism of solid fluxes refining method regarding the removal of oxide inclusions(Al_2O_3) from molten aluminum. Electrochemical polishing method was adopted to prepare surfaces of the samples. Through experiments, the morphology of the residual solidified flux in the solidified samples as well as the wetting action of the molten flux during refining were observed for the first time. Three wetting regimes denoted by absorbing regime, engulfing regime and penetration regime correlating with the removal of oxide films(the most typical and common oxide inclusions in molten aluminum) were proposed in terms of different types and distributions of oxide films and different size ratios of the molten flux to oxide films. Particularly, from a thermodynamic point of view, for the first time, the penetration regime provided concrete evidence that the practical oxide inclusions can be wet by molten flux under ambient fluid of molten aluminum. A spreading model was proposed, according to which ingredients and size parameters of practical solid fluxes can be optimized.

Remove cooking fume using catalytic combustion over Pt/La-Al_2O_3

Five monolithic catalysts with low noble metal content were prepared by irnmerge method （Pt/γ=Al2O3, Pt/La-Al2O3, Pt/YSZ-AI203, Pt＋Pd/La-Al2O3 and Pd/La-Al2O3） and their activity measurements were carried out in a conventional fixed-bed flow reactor. The results show that La-Al2O3 can promote activity of the prepared catalysts and can decrease the complete conversion temperature of cooking fume. The Pt/La-Al2O3 catalyst has the highest activity and can be applied in wide range of gas hourly space velocity （GHSV）. Some characterizations （XRD, TPR） were carried out with the objective to explain differences in catalytic behaviors. The prepared catalyst showed a great potential for application.

A modified approach to actively remove high viscosity silicone oil through 23-gauge cannula

AIM：To report a simple approach to actively remove high viscosity silicone oil through a 23-gauge cannula via pars plana.METHODS：Forty-eight eyes of 48 patients underwent silicone oil（5700 centistokes） removal（SOR） were enrolled.A section of blood transfusion set was prepared to connect a standard 23-gauge cannula and vitrectomy machine.Silicone oil was removed with suction of500-mm Hg vacuum through the cannula.Main outcome measures were SOR duration,number of sutured sites,intraocular pressure（IOP）,best-corrected visual acuity（BCVA）,and complications.RESULTS：Silicone oil was successfully removed in all cases.The mean SOR time was 5.70±0.85 min.Nine eyes（18.75%） needed suture partial sclerotomies.No intraoperative complications were noted.Transient hypotony（≤8 mm Hg） was seen in 3 eyes（6.25%） on postoperative day 1,but all resolved within 1wk.Retinal reattachment was achieved in all cases and no other postoperative complications were noted during 3-month following-up.BCVA at the final visit improved or stabilized in all patients comparing to the preoperative level.CONCLUSION：Active removal of high viscosity silicone oil through a 23-gauge instrument cannula jointed with blood transfusion set is a practical and reliable technique when considering two sides of efficacy and safety.

Using a zeolite medium biofilter to remove organic pollutant and ammonia simultaneously

A pilot scale zeolite medium biological aerated filter(ZBAF) was designed and used to treat municipal wastewater. It showed that ZBAF could simultaneously remove chemical oxygen demand(COD), ammonia-N and turbidity to satisfied degree at a hydraulic retention time(HRT) of 0.95 h. Their average removal efficiencies were 73.9%, 88.4% and 96.2% with the corresponding average effluent concentrations of 43.4 mg/L, 3.5 mg/L and 3.7 NTU, respectively. These effluent items met with the water quality standard of the treated water reused for cooling water. The COD removal volumetric loading rate increased proportionally with its applied volumetric loading rate with its maximum of 7.1 kg/(m 3·d). Ammonia-N removal loading rate also increased proportionally with its applied loading rate at HRT of longer than 0.95 h and the feasible maximum removal loading rate was 0.9 kg/(m 3·d). The COD loading rate did not affect the ammonia-N removal efficiency significantly when it was lower than 5.5 kg/(m 3·d). ZBAF has good application prospect for its low cost and high removal efficiency in the future.

Remove volatile organic compounds(VOCs) with membrane separation techniques

Membrane separation, a new technology for removing VOCs including pervaporation, vapor permeation, membrane contactor, and membrane bioreactor was presented. Comparing with traditional techniques, these special techniques are an efficient and energy saving technology. Vapor permeation can be applied to recovery of organic solvents from exhaust streams. Membrane contactor could be used for removing or recovering VOCs from air or wastewater. Pervaporation and vapor permeation are viable methods for removing VOCs from wastewater to yield a VOC concentrate which could either be destroyed by conventional means, or be recycled for reuse.

Iron-Modification of Pyroclastic Material from PCCVC Eruption (Chile): Characterization and Application to Remove Arsenic from Groundwater

Pyroclastic material from the PCCVC eruption (Chile) was modified with iron (III) solutions leading to the formation of ferrihydrite surface deposits. The aim of the chemical treatment was to prepare an adsorbent to remove arsenic from water by using low-cost mineral wastes. Physicochemical characterization of original and modified materials was carried out by XRD, BET-N2 adsorption, SEM-EDS microscopy and ICP-AES chemical analysis. The modified ash revealed that the increase of bulk iron content was close to 5% (expressed as Fe2O3) whereas surface values were 20.6% Fe2O3. Surface properties showed an increase of BET specific surface with prevalence of mesopores and an increase of total pore volume attributed to presence of nanoscopic iron phase. Kinetic and equilibrium studies were directed to optimize the operative conditions related to the material adsorptive capacity for removing arsenate species. Hence, the adsorbent dose, contact time, pH, stirring and sedimentation were evaluated in batch process. The optimal adsorption dose was 40 g ·L-1 and the solid-liquid contact time was stirring (1 h) and sedimentation (23 h), enough to ensure an adequate turbidity value valid for a pH range between 3.77 and 8.95. The analysis of the isotherm equilibrium by using the Langmuir linear method showed a R2 = 0.995 value. The performance of the treatment to remove arsenic by using a cost-effective adsorbent prepared from volcanic material is a promising technology to apply in the environmental field.

Chitosan Removes Toxic Heavy Metal Ions from Cigarette Mainstream Smoke

This study investigated the removal of heavy metal ions from cigarette mainstream smoke using chitosan. Chitosan of various deacetylation degrees and molecular weights were manually added to cigarette filters in different dosages. The mainstream smoke particulate matter was collected by a Cambridge filter pad, digested by a microwave digestor, and then analyzed for contents of heavy metal ions, including As（Ill/V）, Pb（II）, Cd（II）, Cr（III/VI） and Ni（II）, by graphite furnace atomic absorption spectrometry （GFAAS）. The results showed that chitosan had a removal effect on Pb（II）, Cd（II）, Cr（III/VI） and Ni（II）. Of these, the percent re- moval of Ni（II） was elevated with an increasing dosage of chitosan. Chitosan of a high deace tylation degree exhibited good binding performance toward Cd（II）, Cr（III/VI） and Ni（II）, though with poor efficiency for Pb（II）. Except As（III/V）, all the tested metal ions showed similar tendencies in the growing contents with an increasing chitosan molecular weight. Nonetheless, the percent removal of Cr（III/VI） peaked with a chitosan molecular weight of 200 kDa, followed by a dramatic decrease with an increasing chitosan mo- lecular weight. Generally, chitosan had different removal effects on four out of five tested metal ions, and the percent removal of Cd（II）, Pb（II）, Cr（III/VI） and Ni（II） was approximately 55%, 45%, 50%, and 16%, respectively. In a word, chitosan used in cigarette filter can remove toxic heavy metal ions in the mainstream smoke, improve cigarette safety, and reduce the harm to smokers.

Effects of structural and operating parameters of ECP fan on dust particles removed in the transition flow regime

An enclosed cyclone passageway(ECP)dust-collecting fan is discussed.The ECP fan separates dust by centrifugal force originating from a driven spiral airflow,and its design takes the constraints of Chinese underground coal mines into consideration.Using the force equilibrium law,a general equation for dust removal in the centrifugal dust removal section(CDRS)of the ECP fan is deduced.This general equation is simplified using the CDRS structure and the fan operating parameters and is analysed numerically.The attractive results show that increases in the airflow rate of the fan,the structural ratio of the ECPs and the radius of the extended axis can improve the dust removal performance of the CDRS.Furthermore,the effects of the structural ratio and the radius on dust removal dominate over that of the flow rate,and the effect of the structural ratio is more significant than that of the radius.

Iron Activation of Natural Aluminosilicates to Remove Arsenic from Groundwater

Low-cost adsorbents constituted by Fe-modified-aluminosilicates （laminar and zeolite type minerals） were developed and characterized to be used in the arsenic removal from groundwater. Iron activation was carried out ＂in situ＂ by the synthesis and deposition of mesoporous ferrihydrite. Natural iron-rich aluminosilicate was used as reference. All samples were characterized by X-ray diffraction, Raman spectroscopy, BET N2-adsorption, SEM-EDS microscopy and ICP chemical analysis. Experimental results of arsenic sorption showed that iron-poor raw materials were not active, unlike iron activated samples. The iron loading in all activated samples was below 5% （expressed as Fe203）, whereas the removal capacity of these samples reaches between 200-700 gg of As by g of adsorbent, after reusing between 17 cycles and 70 cycles up to adsorbent saturation. Differences can be associated to mineral structure and to the surface charge modification by iron deposition, affecting the attraction of the As-oxoanion. On the basis of low-cost raw materials, the easy chemical process for activation shows that these materials are potentially attractive for As（V） removal. Likewise, the activation of clay minerals, with natural high content of iron, seems to be a good strategy to enhance the arsenic adsorption ability and consequently the useful life of the adsorbent.

AXIAL HEAT CONDUCTION MODEL TO PREDICT MAXIMUM HEAT REMOVE OF MINIATURE HEAT PIPE BASED ON GREY MODEL THEORY

Computer chip is always accompanied by the increase of heat dissipation and miniaturization. The miniature heat pipes are widely used in notebook computer to resolve the heat dissipation problems. Maximum heat removed model of miniature heat pipes building by grey model is presented. In order to know the foundation for modeling, the smooth grade of error examination is inquired and the accuracy of grey relational grade is verified. The model can be used to select a suitable heat pipes to solve electric heat problems in the future. Final results show that the grey model only needs four experiment data and its error value is less than 10%, further, it is better than computational fluid dynamics （CFD） model.

Applications of Bias-removed Ensemble Mean in the Gale Forecasts over the Yellow Sea and the Bohai Sea

Based on the daily sea surface wind field prediction data of Japan Meteorological Agency(JMA) forecast model,National Centers for Environmental Prediction(NCEP GFS) model and U.S.Navy Operational Global Atmospheric Prediction System(NOGAPS) model at 12:00 UTC from June 28 to August 10 in 2009,the bias-removed ensemble mean(BRE) was used to do the forecast test on the sea surface wind fields,and the root-mean-square error(RMSE) was used to test and evaluate the forecast results.The results showed that the BRE considerably reduced the RMSEs of 24 and 48 h sea surface wind field forecasts,and the forecast skill was superior to that of the single model forecast.The RMSE decreases in the south of central Bohai Sea and the middle of the Yellow Sea were the most obvious.In addition,the BRE forecast improved evidently the forecast skill of the gale process which occurred during July 13-14 and August 7 in 2009.The forecast accuracy of the wind speed and the gale location was also improved.

Combination of Ozonation Process and Absorption through Membrane Contactor Using Natural Hot Spring Water as Absorbent to Remove Ammonia from Wastewater

Ammonia in wastewater is a major pollutant produced in industrial and agricultural wastewaters. Ammonia is often removed by conventional technologies such as pack tower aeration, biological treatment or adsorption as ammonium ion onto zeolites. In many cases, conventional methods are very costly and inefficient, and therefore there is a need for an alternative separation technique for more efficient removal of ammonia from wastewaters. The aim of this study is to investigate the performance of combination of ozonation and absorption through membrane processes to remove ammonia from wastewater using NHSW （natural hot spring water） as absorbent. Experimental results show that hollow fiber membrane contactor has potential application for ammonia removal from wastewater. Operating variables such as time and pH of absorbent solution are found to remarkably influence the removal process efficiency.. Based on experimental results ozonation can improve ammonia removal efficiency through hollow fiber membrane contactor. Ammonia removal efficiencies and overall mass transfer coefficients increase with decreasing pH of absorbent solution.

Clinical Observation on Influence of Chinese Medicines for Promoting Blood Circulation to Remove Blood Stasis on FIB and DD in Plasma of Patients with Cerebral Thrombosis

to study the influence of Chinese medicines for promoting blood circulation to remove blood stasis on fibrinogen(FIB)and D-dimer(DD)in plasma of patients with cerebral thrombosis. Method:73 inpatients with acute cerebral thrombosis were randomly divided into a control group of 34 cases and a treatment group of 39 cases.The content of FIB and DD in plasma was detected before treatment and on the 7th and 14th days after treatment.Result:FIB content in plasma after treatment was lower than that before treatment in the control group(P<0.01)and more remarkable in the treatment group(P<0.001).There was an obvious difference in DD content before and after treatment in both groups.DD content on the 7th and 14th days after treatment in the treatment group was obviously higher than that in the control group(P<0.01 and P<0.05 respectively). Conclusion:Chinese medicines for promoting blood circulation to remove blood stasis can reduce the FIB content in plasma of patients with cerebral thrombosis,raise the DD content in plasma, cause the peak of DD content appear earlier and obviously improve hypercoagulability of blood in patients with cerebral thrombosis.

Damage evolution and removal behaviors of GaN crystals involved in double-grits grinding

Elucidating the complex interactions between the work material and abrasives during grinding of gallium nitride(GaN)single crystals is an active and challenging research area.In this study,molecular dynamics simulations were performed on double-grits interacted grinding of GaN crystals;and the grinding force,coefficient of friction,stress distribution,plastic damage behaviors,and abrasive damage were systematically investigated.The results demonstrated that the interacted distance in both radial and transverse directions achieved better grinding quality than that in only one direction.The grinding force,grinding induced stress,subsurface damage depth,and abrasive wear increase as the transverse interacted distance increases.However,there was no clear correlation between the interaction distance and the number of atoms in the phase transition and dislocation length.Appropriate interacted distances between abrasives can decrease grinding force,coefficient of friction,grinding induced stress,subsurface damage depth,and abrasive wear during the grinding process.The results of grinding tests combined with cross-sectional transmission electron micrographs validated the simulated damage results,i.e.amorphous atoms,high-pressure phase transition,dislocations,stacking faults,and lattice distortions.The results of this study will deepen our understanding of damage accumulation and material removal resulting from coupling between abrasives during grinding and can be used to develop a feasible approach to the wheel design of ordered abrasives.

Estimate of Heavy Metals in Soil with Non-Soil Removed

Quantifying and mapping heavy metals’ concentrations in the soil are important in monitoring and managing heavy metal pollution in the mining areas. However, the cover on the soil acts as a balk when retrieving information from soil. In order to retrieve heavy metal pollution precisely and quickly from hyperspectral images, this study presents a new method to remove non-soil information based NDVI from hyper-spectral and multi-spectral images. The method assumed that the mixed objects in each pixel of remote sensing images are composed only of soil and vegetation-based non-soil end-generational endmembers, then, the soil information of each pixel can be compensated with the non-soil information removed based on its NDVI. Thus, the soil DN value can be corrected to retrieve soil information more precisely. The method has been used on the Hyperion image in June 8, 2002 and the Gaofen-2 (GF-2) image in February 14, 2016 to retrieve the heavy metals’ contents in Bai-ma and De-sheng mining areas, Miyi County, Sichuan Province. From the non-soil information removed images, the R2 and RMSE of the models of estimating Cr, Ag, Cu and Ba in soil are 0.68, 0.724, 0.71, 0.695 and 75.96, 0.03, 52.88, 284.70 respectively. From the original images, the R2 and RMSE of the models of estimating Cr, Ag, Cu and Ba in soil are 0.67, 0.385, 0.425, 0.406 and 80.11, 0.18, 53.43, 396.49 respectively. The retrieval results show that the non-soil information removed images are superior to original images in soil heavy metals’ contents retrieval. This indicates that this method is feasible, and it can be used in soil information retrieval.